Signed-off-by: David Müller <d.mueller@elsoft.ch>master
David Müller (ELSOFT AG)
14 years ago
committed by
Albert ARIBAUD
parent
0bf42feca1
commit
6d754843ff
@ -1,432 +0,0 @@ |
||||
/*
|
||||
* (C) Copyright 2002 |
||||
* Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
||||
* Alex Zuepke <azu@sysgo.de> |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
|
||||
ulong myflush (void); |
||||
|
||||
|
||||
#define FLASH_BANK_SIZE PHYS_FLASH_SIZE |
||||
#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ |
||||
|
||||
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; |
||||
|
||||
|
||||
#define CMD_READ_ARRAY 0x000000F0 |
||||
#define CMD_UNLOCK1 0x000000AA |
||||
#define CMD_UNLOCK2 0x00000055 |
||||
#define CMD_ERASE_SETUP 0x00000080 |
||||
#define CMD_ERASE_CONFIRM 0x00000030 |
||||
#define CMD_PROGRAM 0x000000A0 |
||||
#define CMD_UNLOCK_BYPASS 0x00000020 |
||||
|
||||
#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1))) |
||||
#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1))) |
||||
|
||||
#define BIT_ERASE_DONE 0x00000080 |
||||
#define BIT_RDY_MASK 0x00000080 |
||||
#define BIT_PROGRAM_ERROR 0x00000020 |
||||
#define BIT_TIMEOUT 0x80000000 /* our flag */ |
||||
|
||||
#define READY 1 |
||||
#define ERR 2 |
||||
#define TMO 4 |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/ |
||||
|
||||
ulong flash_init (void) |
||||
{ |
||||
int i, j; |
||||
ulong size = 0; |
||||
|
||||
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { |
||||
ulong flashbase = 0; |
||||
|
||||
flash_info[i].flash_id = |
||||
#if defined(CONFIG_AMD_LV400) |
||||
(AMD_MANUFACT & FLASH_VENDMASK) | |
||||
(AMD_ID_LV400B & FLASH_TYPEMASK); |
||||
#elif defined(CONFIG_AMD_LV800) |
||||
(AMD_MANUFACT & FLASH_VENDMASK) | |
||||
(AMD_ID_LV800B & FLASH_TYPEMASK); |
||||
#else |
||||
#error "Unknown flash configured" |
||||
#endif |
||||
flash_info[i].size = FLASH_BANK_SIZE; |
||||
flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; |
||||
memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); |
||||
if (i == 0) |
||||
flashbase = PHYS_FLASH_1; |
||||
else |
||||
panic ("configured too many flash banks!\n"); |
||||
for (j = 0; j < flash_info[i].sector_count; j++) { |
||||
if (j <= 3) { |
||||
/* 1st one is 16 KB */ |
||||
if (j == 0) { |
||||
flash_info[i].start[j] = |
||||
flashbase + 0; |
||||
} |
||||
|
||||
/* 2nd and 3rd are both 8 KB */ |
||||
if ((j == 1) || (j == 2)) { |
||||
flash_info[i].start[j] = |
||||
flashbase + 0x4000 + (j - |
||||
1) * |
||||
0x2000; |
||||
} |
||||
|
||||
/* 4th 32 KB */ |
||||
if (j == 3) { |
||||
flash_info[i].start[j] = |
||||
flashbase + 0x8000; |
||||
} |
||||
} else { |
||||
flash_info[i].start[j] = |
||||
flashbase + (j - 3) * MAIN_SECT_SIZE; |
||||
} |
||||
} |
||||
size += flash_info[i].size; |
||||
} |
||||
|
||||
flash_protect (FLAG_PROTECT_SET, |
||||
CONFIG_SYS_FLASH_BASE, |
||||
CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, |
||||
&flash_info[0]); |
||||
|
||||
flash_protect (FLAG_PROTECT_SET, |
||||
CONFIG_ENV_ADDR, |
||||
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); |
||||
|
||||
return size; |
||||
} |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/ |
||||
void flash_print_info (flash_info_t * info) |
||||
{ |
||||
int i; |
||||
|
||||
switch (info->flash_id & FLASH_VENDMASK) { |
||||
case (AMD_MANUFACT & FLASH_VENDMASK): |
||||
puts ("AMD: "); |
||||
break; |
||||
default: |
||||
puts ("Unknown Vendor "); |
||||
break; |
||||
} |
||||
|
||||
switch (info->flash_id & FLASH_TYPEMASK) { |
||||
case (AMD_ID_LV400B & FLASH_TYPEMASK): |
||||
puts ("1x Amd29LV400BB (4Mbit)\n"); |
||||
break; |
||||
case (AMD_ID_LV800B & FLASH_TYPEMASK): |
||||
puts ("1x Amd29LV800BB (8Mbit)\n"); |
||||
break; |
||||
default: |
||||
puts ("Unknown Chip Type\n"); |
||||
goto Done; |
||||
break; |
||||
} |
||||
|
||||
printf (" Size: %ld MB in %d Sectors\n", |
||||
info->size >> 20, info->sector_count); |
||||
|
||||
puts (" Sector Start Addresses:"); |
||||
for (i = 0; i < info->sector_count; i++) { |
||||
if ((i % 5) == 0) { |
||||
puts ("\n "); |
||||
} |
||||
printf (" %08lX%s", info->start[i], |
||||
info->protect[i] ? " (RO)" : " "); |
||||
} |
||||
puts ("\n"); |
||||
|
||||
Done: ; |
||||
} |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
*/ |
||||
|
||||
int flash_erase (flash_info_t * info, int s_first, int s_last) |
||||
{ |
||||
ushort result; |
||||
int iflag, cflag, prot, sect; |
||||
int rc = ERR_OK; |
||||
int chip; |
||||
|
||||
/* first look for protection bits */ |
||||
|
||||
if (info->flash_id == FLASH_UNKNOWN) |
||||
return ERR_UNKNOWN_FLASH_TYPE; |
||||
|
||||
if ((s_first < 0) || (s_first > s_last)) { |
||||
return ERR_INVAL; |
||||
} |
||||
|
||||
if ((info->flash_id & FLASH_VENDMASK) != |
||||
(AMD_MANUFACT & FLASH_VENDMASK)) { |
||||
return ERR_UNKNOWN_FLASH_VENDOR; |
||||
} |
||||
|
||||
prot = 0; |
||||
for (sect = s_first; sect <= s_last; ++sect) { |
||||
if (info->protect[sect]) { |
||||
prot++; |
||||
} |
||||
} |
||||
if (prot) |
||||
return ERR_PROTECTED; |
||||
|
||||
/*
|
||||
* Disable interrupts which might cause a timeout |
||||
* here. Remember that our exception vectors are |
||||
* at address 0 in the flash, and we don't want a |
||||
* (ticker) exception to happen while the flash |
||||
* chip is in programming mode. |
||||
*/ |
||||
cflag = icache_status (); |
||||
icache_disable (); |
||||
iflag = disable_interrupts (); |
||||
|
||||
/* Start erase on unprotected sectors */ |
||||
for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { |
||||
printf ("Erasing sector %2d ... ", sect); |
||||
|
||||
/* arm simple, non interrupt dependent timer */ |
||||
reset_timer_masked (); |
||||
|
||||
if (info->protect[sect] == 0) { /* not protected */ |
||||
vu_short *addr = (vu_short *) (info->start[sect]); |
||||
|
||||
MEM_FLASH_ADDR1 = CMD_UNLOCK1; |
||||
MEM_FLASH_ADDR2 = CMD_UNLOCK2; |
||||
MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; |
||||
|
||||
MEM_FLASH_ADDR1 = CMD_UNLOCK1; |
||||
MEM_FLASH_ADDR2 = CMD_UNLOCK2; |
||||
*addr = CMD_ERASE_CONFIRM; |
||||
|
||||
/* wait until flash is ready */ |
||||
chip = 0; |
||||
|
||||
do { |
||||
result = *addr; |
||||
|
||||
/* check timeout */ |
||||
if (get_timer_masked () > |
||||
CONFIG_SYS_FLASH_ERASE_TOUT) { |
||||
MEM_FLASH_ADDR1 = CMD_READ_ARRAY; |
||||
chip = TMO; |
||||
break; |
||||
} |
||||
|
||||
if (!chip |
||||
&& (result & 0xFFFF) & BIT_ERASE_DONE) |
||||
chip = READY; |
||||
|
||||
if (!chip |
||||
&& (result & 0xFFFF) & BIT_PROGRAM_ERROR) |
||||
chip = ERR; |
||||
|
||||
} while (!chip); |
||||
|
||||
MEM_FLASH_ADDR1 = CMD_READ_ARRAY; |
||||
|
||||
if (chip == ERR) { |
||||
rc = ERR_PROG_ERROR; |
||||
goto outahere; |
||||
} |
||||
if (chip == TMO) { |
||||
rc = ERR_TIMOUT; |
||||
goto outahere; |
||||
} |
||||
|
||||
puts ("ok.\n"); |
||||
} else { /* it was protected */ |
||||
|
||||
puts ("protected!\n"); |
||||
} |
||||
} |
||||
|
||||
if (ctrlc ()) |
||||
puts ("User Interrupt!\n"); |
||||
|
||||
outahere: |
||||
/* allow flash to settle - wait 10 ms */ |
||||
udelay_masked (10000); |
||||
|
||||
if (iflag) |
||||
enable_interrupts (); |
||||
|
||||
if (cflag) |
||||
icache_enable (); |
||||
|
||||
return rc; |
||||
} |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Copy memory to flash |
||||
*/ |
||||
|
||||
static int write_hword (flash_info_t * info, ulong dest, ushort data) |
||||
{ |
||||
vu_short *addr = (vu_short *) dest; |
||||
ushort result; |
||||
int rc = ERR_OK; |
||||
int cflag, iflag; |
||||
int chip; |
||||
|
||||
/*
|
||||
* Check if Flash is (sufficiently) erased |
||||
*/ |
||||
result = *addr; |
||||
if ((result & data) != data) |
||||
return ERR_NOT_ERASED; |
||||
|
||||
|
||||
/*
|
||||
* Disable interrupts which might cause a timeout |
||||
* here. Remember that our exception vectors are |
||||
* at address 0 in the flash, and we don't want a |
||||
* (ticker) exception to happen while the flash |
||||
* chip is in programming mode. |
||||
*/ |
||||
cflag = icache_status (); |
||||
icache_disable (); |
||||
iflag = disable_interrupts (); |
||||
|
||||
MEM_FLASH_ADDR1 = CMD_UNLOCK1; |
||||
MEM_FLASH_ADDR2 = CMD_UNLOCK2; |
||||
MEM_FLASH_ADDR1 = CMD_PROGRAM; |
||||
*addr = data; |
||||
|
||||
/* arm simple, non interrupt dependent timer */ |
||||
reset_timer_masked (); |
||||
|
||||
/* wait until flash is ready */ |
||||
chip = 0; |
||||
do { |
||||
result = *addr; |
||||
|
||||
/* check timeout */ |
||||
if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { |
||||
chip = ERR | TMO; |
||||
break; |
||||
} |
||||
if (!chip && ((result & 0x80) == (data & 0x80))) |
||||
chip = READY; |
||||
|
||||
if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { |
||||
result = *addr; |
||||
|
||||
if ((result & 0x80) == (data & 0x80)) |
||||
chip = READY; |
||||
else |
||||
chip = ERR; |
||||
} |
||||
|
||||
} while (!chip); |
||||
|
||||
*addr = CMD_READ_ARRAY; |
||||
|
||||
if (chip == ERR || *addr != data) |
||||
rc = ERR_PROG_ERROR; |
||||
|
||||
if (iflag) |
||||
enable_interrupts (); |
||||
|
||||
if (cflag) |
||||
icache_enable (); |
||||
|
||||
return rc; |
||||
} |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Copy memory to flash. |
||||
*/ |
||||
|
||||
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) |
||||
{ |
||||
ulong cp, wp; |
||||
int l; |
||||
int i, rc; |
||||
ushort data; |
||||
|
||||
wp = (addr & ~1); /* get lower word aligned address */ |
||||
|
||||
/*
|
||||
* handle unaligned start bytes |
||||
*/ |
||||
if ((l = addr - wp) != 0) { |
||||
data = 0; |
||||
for (i = 0, cp = wp; i < l; ++i, ++cp) { |
||||
data = (data >> 8) | (*(uchar *) cp << 8); |
||||
} |
||||
for (; i < 2 && cnt > 0; ++i) { |
||||
data = (data >> 8) | (*src++ << 8); |
||||
--cnt; |
||||
++cp; |
||||
} |
||||
for (; cnt == 0 && i < 2; ++i, ++cp) { |
||||
data = (data >> 8) | (*(uchar *) cp << 8); |
||||
} |
||||
|
||||
if ((rc = write_hword (info, wp, data)) != 0) { |
||||
return (rc); |
||||
} |
||||
wp += 2; |
||||
} |
||||
|
||||
/*
|
||||
* handle word aligned part |
||||
*/ |
||||
while (cnt >= 2) { |
||||
data = *((vu_short *) src); |
||||
if ((rc = write_hword (info, wp, data)) != 0) { |
||||
return (rc); |
||||
} |
||||
src += 2; |
||||
wp += 2; |
||||
cnt -= 2; |
||||
} |
||||
|
||||
if (cnt == 0) { |
||||
return ERR_OK; |
||||
} |
||||
|
||||
/*
|
||||
* handle unaligned tail bytes |
||||
*/ |
||||
data = 0; |
||||
for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { |
||||
data = (data >> 8) | (*src++ << 8); |
||||
--cnt; |
||||
} |
||||
for (; i < 2; ++i, ++cp) { |
||||
data = (data >> 8) | (*(uchar *) cp << 8); |
||||
} |
||||
|
||||
return write_hword (info, wp, data); |
||||
} |
||||
Loading…
Reference in new issue