Merge git://git.denx.de/u-boot-sunxi

Makefile

@@ -1053,6 +1053,7 @@ u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
 
 u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
 	$(call if_changed,mkfitimage)
+	$(BOARD_SIZE_CHECK)
 
 u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)

arch/arm/Kconfig

@@ -746,6 +746,7 @@ config ARCH_SUNXI
 	select USE_TINY_PRINTF
 	imply CMD_GPT
 	imply FAT_WRITE
+	imply OF_LIBFDT_OVERLAY
 	imply PRE_CONSOLE_BUFFER
 	imply SPL_GPIO_SUPPORT
 	imply SPL_LIBCOMMON_SUPPORT

cmd/Kconfig

@@ -397,6 +397,7 @@ menu "Memory commands"
 config CMD_CRC32
 	bool "crc32"
 	select HASH
+	default n if ARCH_SUNXI
 	default y
 	help
 	  Compute CRC32.
@@ -538,6 +539,7 @@ config CMD_LZMADEC
 
 config CMD_UNZIP
 	bool "unzip"
+	default n if ARCH_SUNXI
 	default y if CMD_BOOTI
 	help
 	  Uncompress a zip-compressed memory region.
@@ -746,12 +748,14 @@ config CMD_I2C
 
 config CMD_LOADB
 	bool "loadb"
+	default n if ARCH_SUNXI
 	default y
 	help
 	  Load a binary file over serial line.
 
 config CMD_LOADS
 	bool "loads"
+	default n if ARCH_SUNXI
 	default y
 	help
 	  Load an S-Record file over serial line
@@ -1134,6 +1138,7 @@ config CMD_GETTIME
 # TODO: rename to CMD_SLEEP
 config CMD_MISC
 	bool "sleep"
+	default n if ARCH_SUNXI
 	default y
 	help
 	  Delay execution for some time

configs/CHIP_defconfig

@@ -20,4 +20,3 @@ CONFIG_AXP_ALDO4_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_OF_LIBFDT_OVERLAY=y

configs/CHIP_pro_defconfig

@@ -25,4 +25,3 @@ CONFIG_AXP_ALDO4_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_OF_LIBFDT_OVERLAY=y

drivers/dfu/Kconfig

@@ -2,6 +2,7 @@ menu "DFU support"
 
 config USB_FUNCTION_DFU
 	bool
+	select HASH
 
 if CMD_DFU
 config DFU_TFTP

drivers/gpio/sunxi_gpio.c

@@ -345,6 +345,7 @@ static const struct udevice_id sunxi_gpio_ids[] = {
 	ID("allwinner,sun4i-a10-pinctrl",	a_all),
 	ID("allwinner,sun5i-a10s-pinctrl",	a_all),
 	ID("allwinner,sun5i-a13-pinctrl",	a_all),
+	ID("allwinner,sun50i-h5-pinctrl",	a_all),
 	ID("allwinner,sun6i-a31-pinctrl",	a_all),
 	ID("allwinner,sun6i-a31s-pinctrl",	a_all),
 	ID("allwinner,sun7i-a20-pinctrl",	a_all),

drivers/video/Kconfig

@@ -38,6 +38,7 @@ config BACKLIGHT_GPIO
 config VIDEO_BPP8
 	bool "Support 8-bit-per-pixel displays"
 	depends on DM_VIDEO
+	default n if ARCH_SUNXI
 	default y if DM_VIDEO
 	help
 	  Support drawing text and bitmaps onto a 8-bit-per-pixel display.
@@ -48,6 +49,7 @@ config VIDEO_BPP8
 config VIDEO_BPP16
 	bool "Support 16-bit-per-pixel displays"
 	depends on DM_VIDEO
+	default n if ARCH_SUNXI
 	default y if DM_VIDEO
 	help
 	  Support drawing text and bitmaps onto a 16-bit-per-pixel display.

drivers/video/sunxi/sunxi_display.c

@@ -625,6 +625,8 @@ static void sunxi_ctfb_mode_to_display_timing(const struct ctfb_res_modes *mode,
 	timing->vback_porch.typ = mode->upper_margin;
 	timing->vsync_len.typ = mode->vsync_len;
 
+	timing->flags = 0;
+
 	if (mode->sync & FB_SYNC_HOR_HIGH_ACT)
 		timing->flags |= DISPLAY_FLAGS_HSYNC_HIGH;
 	else

include/configs/sunxi-common.h

@@ -147,6 +147,16 @@
 #endif
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
+
+#ifdef CONFIG_ARM64
+/*
+ * This is actually (CONFIG_ENV_OFFSET -
+ * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
+ * directly in a makefile, without the preprocessor expansion.
+ */
+#define CONFIG_BOARD_SIZE_LIMIT		0x7e000
+#endif
+
 #if CONFIG_MMC_SUNXI_SLOT_EXTRA != -1
 /* If we have two devices (most likely eMMC + MMC), favour the eMMC */
 #define CONFIG_SYS_MMC_ENV_DEV		1

lib/Kconfig

@@ -57,6 +57,7 @@ config PANIC_HANG
 
 config REGEX
 	bool "Enable regular expression support"
+	default n if ARCH_SUNXI
 	default y if NET
 	help
 	  If this variable is defined, U-Boot is linked against the