From 780f30b642177793a984cf0a3c428994a0564f88 Mon Sep 17 00:00:00 2001 From: Helmut Raiger Date: Wed, 6 Jul 2011 09:40:28 +0200 Subject: [PATCH] mxc_nand: fixed some typos (cosmetic) Signed-off-by: Helmut Raiger Signed-off-by: Scott Wood --- drivers/mtd/nand/mxc_nand.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 2a8dd7e..78e07cc 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -350,7 +350,7 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr) } /* - * This function requests the NANDFC to initate the transfer + * This function requests the NANDFC to initiate the transfer * of data currently in the NANDFC RAM buffer to the NAND device. */ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, @@ -394,7 +394,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id, } /* - * Requests NANDFC to initated the transfer of data from the + * Requests NANDFC to initiate the transfer of data from the * NAND device into in the NANDFC ram buffer. */ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id, @@ -637,7 +637,7 @@ static int mxc_nand_read_page_syndrome(struct mtd_info *mtd, MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n", host->page_addr, buf, oob); - /* first read out the data area and the available portion of OOB */ + /* first read the data area and the available portion of OOB */ for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) { int stat; @@ -1179,7 +1179,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command, /* * before sending SEQIN command for partial write, * we need read one page out. FSL NFC does not support - * partial write. It alway send out 512+ecc+512+ecc ... + * partial write. It always sends out 512+ecc+512+ecc * for large page nand flash. But for small page nand * flash, it does support SPARE ONLY operation. */ @@ -1209,7 +1209,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command, send_prog_page(host, 0, host->spare_only); if (host->pagesize_2k && !is_mxc_nfc_11()) { - /* data in 4 areas datas */ + /* data in 4 areas */ send_prog_page(host, 1, host->spare_only); send_prog_page(host, 2, host->spare_only); send_prog_page(host, 3, host->spare_only); @@ -1225,10 +1225,9 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command, if (column != -1) { /* * MXC NANDFC can only perform full page+spare or - * spare-only read/write. When the upper layers - * layers perform a read/write buf operation, - * we will used the saved column adress to index into - * the full page. + * spare-only read/write. When the upper layers perform + * a read/write buffer operation, we will use the saved + * column address to index into the full page. */ send_addr(host, 0); if (host->pagesize_2k) @@ -1377,7 +1376,7 @@ int board_nand_init(struct nand_chip *this) /* Unlock Block Command for given address range */ writew(0x4, &host->regs->nfc_wrprot); - /* NAND bus width determines access funtions used by upper layer */ + /* NAND bus width determines access functions used by upper layer */ if (is_16bit_nand()) this->options |= NAND_BUSWIDTH_16;