ARM: tegra: use numeric versioning for p2771-0000

The board ID EEPROM and board ID stickers on p2771-0000 will use a numeric
versioning scheme, with version numbers such as 000/100/200/300/400/500.
Within NVIDIA, these versions are also known as A00/A01/A02/A03/A04/B00.
However, that numbering scheme is not easily visible outside of NVIDIA,
and so does not make much sense to use. Convert U-Boot to use the readily
visible numeric scheme.

Also, it turns out that the current A02 DT actually applies to board
versions 000/100/200 (A00..A02). Consequently rename this to 000 not 200
so that all U-Boot builds are named after the first version of the HW they
support.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

arch/arm/dts/Makefile

@@ -58,8 +58,8 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra124-jetson-tk1.dtb \
 	tegra124-nyan-big.dtb \
 	tegra124-venice2.dtb \
-	tegra186-p2771-0000-a02.dtb \
-	tegra186-p2771-0000-b00.dtb \
+	tegra186-p2771-0000-000.dtb \
+	tegra186-p2771-0000-500.dtb \
 	tegra210-e2220-1170.dtb \
 	tegra210-p2371-0000.dtb \
 	tegra210-p2371-2180.dtb \

arch/arm/dts/tegra186-p2771-0000-000.dts

@@ -3,8 +3,8 @@
 #include "tegra186-p2771-0000.dtsi"
 
 / {
-	model = "NVIDIA P2771-0000 A02";
-	compatible = "nvidia,p2771-0000-a02", "nvidia,p2771-0000", "nvidia,tegra186";
+	model = "NVIDIA P2771-0000-000";
+	compatible = "nvidia,p2771-0000-000", "nvidia,p2771-0000", "nvidia,tegra186";
 
 	sdhci@3400000 {
 		cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_LOW>;

arch/arm/dts/tegra186-p2771-0000-500.dts

@@ -3,8 +3,8 @@
 #include "tegra186-p2771-0000.dtsi"
 
 / {
-	model = "NVIDIA P2771-0000 B00";
-	compatible = "nvidia,p2771-0000-b00", "nvidia,p2771-0000", "nvidia,tegra186";
+	model = "NVIDIA P2771-0000-500";
+	compatible = "nvidia,p2771-0000-500", "nvidia,p2771-0000", "nvidia,tegra186";
 
 	sdhci@3400000 {
 		cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;

configs/p2771-0000-000_defconfig

@@ -2,10 +2,10 @@ CONFIG_ARM=y
 CONFIG_TEGRA=y
 CONFIG_TEGRA186=y
 CONFIG_TARGET_P2771_0000=y
-CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-a02"
+CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-000"
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="Tegra186 (P2771-0000 A02) # "
+CONFIG_SYS_PROMPT="Tegra186 (P2771-0000-000) # "
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set

configs/p2771-0000-500_defconfig

@@ -2,10 +2,10 @@ CONFIG_ARM=y
 CONFIG_TEGRA=y
 CONFIG_TEGRA186=y
 CONFIG_TARGET_P2771_0000=y
-CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-b00"
+CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-500"
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="Tegra186 (P2771-0000 B00) # "
+CONFIG_SYS_PROMPT="Tegra186 (P2771-0000-500) # "
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set