include: configs: Enable DWC3 and DFU in DRA7xx

Enabled dwc3, dwc3-omap and PHY for dwc3 are enabled. Also enabled
support for DFU.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>

include/configs/dra7xx_evm.h

@@ -43,6 +43,47 @@
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
 
+#define DFU_ALT_INFO_MMC \
+	"dfu_alt_info_mmc=" \
+	"boot part 0 1;" \
+	"rootfs part 0 2;" \
+	"MLO fat 0 1;" \
+	"MLO.raw raw 0x100 0x100;" \
+	"u-boot.img.raw raw 0x300 0x400;" \
+	"spl-os-args.raw raw 0x80 0x80;" \
+	"spl-os-image.raw raw 0x900 0x2000;" \
+	"spl-os-args fat 0 1;" \
+	"spl-os-image fat 0 1;" \
+	"u-boot.img fat 0 1;" \
+	"uEnv.txt fat 0 1\0"
+
+#define DFU_ALT_INFO_EMMC \
+	"dfu_alt_info_emmc=" \
+	"rawemmc raw 0 3751936;" \
+	"boot part 1 1;" \
+	"rootfs part 1 2;" \
+	"MLO fat 1 1;" \
+	"MLO.raw raw 0x100 0x100;" \
+	"u-boot.img.raw raw 0x300 0x400;" \
+	"spl-os-args.raw raw 0x80 0x80;" \
+	"spl-os-image.raw raw 0x900 0x2000;" \
+	"spl-os-args fat 1 1;" \
+	"spl-os-image fat 1 1;" \
+	"u-boot.img fat 1 1;" \
+	"uEnv.txt fat 1 1\0"
+
+#define DFU_ALT_INFO_RAM \
+	"dfu_alt_info_ram=" \
+	"kernel ram 0x80200000 0x4000000;" \
+	"fdt ram 0x80f80000 0x80000;" \
+	"ramdisk ram 0x81000000 0x4000000\0"
+
+#define DFUARGS \
+	"dfu_bufsiz=0x10000\0" \
+	DFU_ALT_INFO_MMC \
+	DFU_ALT_INFO_EMMC \
+	DFU_ALT_INFO_RAM
+
 #include <configs/ti_omap5_common.h>
 
 /* Enhance our eMMC support / experience. */
@@ -131,6 +172,28 @@
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_OMAP_USB2PHY2_HOST
 
+/* USB GADGET */
+#define CONFIG_USB_DWC3_PHY_OMAP
+#define CONFIG_USB_DWC3_OMAP
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
+#define CONFIG_G_DNL_VENDOR_NUM 0x0403
+#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
+#define CONFIG_USB_GADGET_DUALSPEED
+
+/* USB Device Firmware Update support */
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_RAM
+#define CONFIG_CMD_DFU
+
+#define CONFIG_DFU_MMC
+#define CONFIG_DFU_RAM
+
 /* SATA */
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_CMD_SCSI

include/configs/ti_omap5_common.h

@@ -68,6 +68,10 @@
 #define PARTS_DEFAULT
 #endif
 
+#ifndef DFUARGS
+#define DFUARGS
+#endif
+
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
@@ -138,6 +142,7 @@
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
+	DFUARGS \
 
 #define CONFIG_BOOTCOMMAND \
 	"run findfdt; " \