diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index 3f87672..1bfb48b 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -242,7 +242,7 @@ struct sunxi_ccm_reg { /* ahb_gate0 offsets */ #define AHB_GATE_OFFSET_USB_OHCI1 30 #define AHB_GATE_OFFSET_USB_OHCI0 29 -#ifdef CONFIG_MACH_SUN8I_H3 +#ifdef CONFIG_MACH_SUNXI_H3_H5 /* * These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call * them 0 - 2 like they were called on older SoCs. @@ -293,7 +293,7 @@ struct sunxi_ccm_reg { #define CCM_USB_CTRL_PHY1_CLK (0x1 << 9) #define CCM_USB_CTRL_PHY2_CLK (0x1 << 10) #define CCM_USB_CTRL_PHY3_CLK (0x1 << 11) -#ifdef CONFIG_MACH_SUN8I_H3 +#ifdef CONFIG_MACH_SUNXI_H3_H5 /* * These are OHCI1 - OHCI3 in the datasheet (OHCI0 is for the OTG) we call * them 0 - 2 like they were called on older SoCs. diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h index 3c85222..ea672fe 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h @@ -56,7 +56,7 @@ #define SUNXI_USB2_BASE 0x01c1c000 #endif #ifdef CONFIG_SUNXI_GEN_SUN6I -#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I) +#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I) #define SUNXI_USBPHY_BASE 0x01c19000 #define SUNXI_USB0_BASE 0x01c1a000 #define SUNXI_USB1_BASE 0x01c1b000 @@ -94,7 +94,7 @@ #define SUNXI_KEYPAD_BASE 0x01c23000 #define SUNXI_TZPC_BASE 0x01c23400 -#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3) || \ +#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUNXI_H3_H5) || \ defined(CONFIG_MACH_SUN50I) /* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */ #define SUNXI_SIDC_BASE 0x01c14000 diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h index 53e6d47..1dc8220 100644 --- a/arch/arm/include/asm/arch-sunxi/dram.h +++ b/arch/arm/include/asm/arch-sunxi/dram.h @@ -24,7 +24,7 @@ #include #elif defined(CONFIG_MACH_SUN8I_A83T) #include -#elif defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I) +#elif defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I) #include #elif defined(CONFIG_MACH_SUN9I) #include diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 7daba11..efab481 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -48,7 +48,7 @@ obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o -obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o +obj-$(CONFIG_MACH_SUNXI_H3_H5) += dram_sun8i_h3.o obj-$(CONFIG_MACH_SUN9I) += dram_sun9i.o obj-$(CONFIG_MACH_SUN50I) += dram_sun8i_h3.o endif diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 96764d1..5e03d03 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -98,7 +98,7 @@ static int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0); sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP); -#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_H3) +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUNXI_H3_H5) sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0); sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0); sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP); diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c index d123b3a..4762fbf 100644 --- a/arch/arm/mach-sunxi/clock_sun6i.c +++ b/arch/arm/mach-sunxi/clock_sun6i.c @@ -22,7 +22,7 @@ void clock_init_safe(void) struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; -#if !defined(CONFIG_MACH_SUN8I_H3) && !defined(CONFIG_MACH_SUN50I) +#if !defined(CONFIG_MACH_SUNXI_H3_H5) && !defined(CONFIG_MACH_SUN50I) struct sunxi_prcm_reg * const prcm = (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; @@ -51,7 +51,7 @@ void clock_init_safe(void) void clock_init_sec(void) { -#ifdef CONFIG_MACH_SUN8I_H3 +#ifdef CONFIG_MACH_SUNXI_H3_H5 struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; @@ -152,7 +152,7 @@ void clock_set_pll5(unsigned int clk, bool sigma_delta_enable) const int max_n = 32; int k = 1, m = 2; -#ifdef CONFIG_MACH_SUN8I_H3 +#ifdef CONFIG_MACH_SUNXI_H3_H5 clrsetbits_le32(&ccm->pll5_tuning_cfg, CCM_PLL5_TUN_LOCK_TIME_MASK | CCM_PLL5_TUN_INIT_FREQ_MASK, CCM_PLL5_TUN_LOCK_TIME(2) | CCM_PLL5_TUN_INIT_FREQ(16)); diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c index 278587b..9bf0b56 100644 --- a/arch/arm/mach-sunxi/usb_phy.c +++ b/arch/arm/mach-sunxi/usb_phy.c @@ -146,10 +146,10 @@ __maybe_unused static void usb_phy_write(struct sunxi_usb_phy *phy, int addr, } } -#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I) +#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I) static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy) { -#if defined CONFIG_MACH_SUN8I_H3 +#if defined CONFIG_MACH_SUNXI_H3_H5 if (phy->id == 0) clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01); #endif diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 654ec73..b3af193 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -54,6 +54,11 @@ config SUNXI_GEN_SUN6I watchdog, etc. +config MACH_SUNXI_H3_H5 + bool + select SUNXI_GEN_SUN6I + select SUPPORT_SPL + choice prompt "Sunxi SoC Variant" optional @@ -124,8 +129,7 @@ config MACH_SUN8I_H3 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI - select SUNXI_GEN_SUN6I - select SUPPORT_SPL + select MACH_SUNXI_H3_H5 select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT config MACH_SUN9I @@ -147,7 +151,7 @@ endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" config MACH_SUN8I bool - default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T + default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || MACH_SUN8I_A83T config RESERVE_ALLWINNER_BOOT0_HEADER bool "reserve space for Allwinner boot0 header" @@ -335,7 +339,7 @@ config OLD_SUNXI_KERNEL_COMPAT config MMC0_CD_PIN string "Card detect pin for mmc0" - default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I + default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I default "" ---help--- Set the card detect pin for mmc0, leave empty to not use cd. This @@ -500,7 +504,7 @@ config AXP_GPIO config VIDEO bool "Enable graphical uboot console on HDMI, LCD or VGA" - depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I + depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN9I && !MACH_SUN50I default y ---help--- Say Y here to add support for using a cfb console on the HDMI, LCD diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 1f23c8e..5ca0a71 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -132,7 +132,7 @@ if SPL config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_H3 || MACH_SUN50I + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I ---help--- Enable support for SPI Flash. This option allows SPL to read from sunxi SPI Flash. It uses the same method as the boot ROM, so does diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index b87210b..abdfada 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -62,7 +62,7 @@ #define AHB_GATE_OFFSET_EPHY 0 -#if defined(CONFIG_MACH_SUN8I_H3) +#if defined(CONFIG_MACH_SUNXI_H3_H5) #define SUN8I_GPD8_GMAC 2 #else #define SUN8I_GPD8_GMAC 4 diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index f2c5629..64e5bc2 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -12,7 +12,7 @@ choice default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 default AXP818_POWER if MACH_SUN8I_A83T - default SUNXI_NO_PMIC if MACH_SUN8I_H3 || MACH_SUN50I + default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I config SUNXI_NO_PMIC bool "board without a pmic" @@ -60,7 +60,7 @@ config AXP818_POWER config SY8106A_POWER bool "SY8106A pmic support" - depends on MACH_SUN8I_H3 + depends on MACH_SUNXI_H3_H5 ---help--- Select this to enable support for the SY8106A pmic found on some H3 boards. diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c index 5bb97ff..068f24f 100644 --- a/drivers/usb/host/ehci-sunxi.c +++ b/drivers/usb/host/ehci-sunxi.c @@ -45,7 +45,7 @@ static int ehci_usb_probe(struct udevice *dev) * clocks resp. phys. */ priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0; -#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I) +#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I) extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0; #endif priv->phy_index = ((uintptr_t)hccr - SUNXI_USB1_BASE) / BASE_DIST;