arm, at91: compile mpddrc ram init code also for AT91SAM9M10G45

- compile mpddrc ram init code also for AT91SAM9M10G45
  based boards.
- in CONFIG_SAMA5D3 case, look for the ATMEL_MPDDRC_CR_DECOD_INTERLEAVED
  in the cr configuration

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

arch/arm/cpu/at91-common/Makefile

@@ -9,4 +9,8 @@
 #
 
 obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o
-obj-$(CONFIG_SPL_BUILD) += mpddrc.o spl.o
+ifneq ($(CONFIG_SPL_BUILD),)
+obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o
+obj-$(CONFIG_SAMA5D3) += mpddrc.o
+obj-y += spl.o
+endif

arch/arm/cpu/at91-common/mpddrc.c

@@ -17,6 +17,15 @@ static inline void atmel_mpddr_op(int mode, u32 ram_address)
 	writel(0, ram_address);
 }
 
+static int ddr2_decodtype_is_seq(u32 cr)
+{
+#if defined(CONFIG_SAMA5D3)
+	if (cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED)
+		return 0;
+#endif
+	return 1;
+}
+
 int ddr2_init(const unsigned int ram_address,
 	      const struct atmel_mpddr *mpddr_value)
 {
@@ -25,7 +34,7 @@ int ddr2_init(const unsigned int ram_address,
 
 	/* Compute bank offset according to NC in configuration register */
 	ba_off = (mpddr_value->cr & ATMEL_MPDDRC_CR_NC_MASK) + 9;
-	if (!(mpddr_value->cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED))
+	if (ddr2_decodtype_is_seq(mpddr_value->cr))
 		ba_off += ((mpddr_value->cr & ATMEL_MPDDRC_CR_NR_MASK) >> 2) + 11;
 
 	ba_off += (mpddr_value->md & ATMEL_MPDDRC_MD_DBW_MASK) ? 1 : 2;