diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index adb5bd3..696f227 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -122,9 +122,6 @@ config TARGET_T208XRDB bool "Support T208xRDB" select SUPPORT_SPL -config TARGET_T4240EMU - bool "Support T4240EMU" - config TARGET_T4240QDS bool "Support T4240QDS" select SUPPORT_SPL diff --git a/board/freescale/t4qds/Kconfig b/board/freescale/t4qds/Kconfig index ab34b9e..27a64b6 100644 --- a/board/freescale/t4qds/Kconfig +++ b/board/freescale/t4qds/Kconfig @@ -1,16 +1,3 @@ -if TARGET_T4240EMU - -config SYS_BOARD - default "t4qds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "T4240EMU" - -endif - if TARGET_T4240QDS config SYS_BOARD diff --git a/board/freescale/t4qds/MAINTAINERS b/board/freescale/t4qds/MAINTAINERS index f88ee7d..fd340f3 100644 --- a/board/freescale/t4qds/MAINTAINERS +++ b/board/freescale/t4qds/MAINTAINERS @@ -18,9 +18,3 @@ M: Aneesh Bansal S: Maintained F: configs/T4160QDS_SECURE_BOOT_defconfig F: configs/T4240QDS_SECURE_BOOT_defconfig - -T4240EMU BOARD -M: York Sun -S: Maintained -F: include/configs/T4240EMU.h -F: configs/T4240EMU_defconfig diff --git a/board/freescale/t4qds/Makefile b/board/freescale/t4qds/Makefile index 4e8e5cb..bd2c1f1 100644 --- a/board/freescale/t4qds/Makefile +++ b/board/freescale/t4qds/Makefile @@ -8,7 +8,6 @@ ifdef CONFIG_SPL_BUILD obj-y += spl.o else obj-$(CONFIG_T4240QDS) += t4240qds.o -obj-$(CONFIG_T4240EMU) += t4240emu.o obj-$(CONFIG_T4240QDS)+= eth.o obj-$(CONFIG_PCI) += pci.o endif diff --git a/board/freescale/t4qds/ddr.h b/board/freescale/t4qds/ddr.h index 8183af7..4d0e3c4 100644 --- a/board/freescale/t4qds/ddr.h +++ b/board/freescale/t4qds/ddr.h @@ -25,7 +25,6 @@ struct board_specific_parameters { * for each n_ranks group. */ -#ifdef CONFIG_T4240QDS static const struct board_specific_parameters udimm0[] = { /* * memory controller 0 @@ -63,31 +62,6 @@ static const struct board_specific_parameters rdimm0[] = { {} }; -#else /* CONFIG_T4240EMU */ -static const struct board_specific_parameters udimm0[] = { - /* - * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | - */ - {2, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, - {1, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, - {} -}; - -static const struct board_specific_parameters rdimm0[] = { - /* - * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | - */ - {4, 2140, 0, 5, 8, 0x0, 0x0, 0xff, 2, 0}, - {2, 2140, 0, 5, 8, 0x0, 0x0, 0xff, 2, 0}, - {1, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, - {} -}; -#endif /* CONFIG_T4240EMU */ - /* * The three slots have slightly different timing. The center values are good * for all slots. We use identical speed tables for them. In future use, if diff --git a/configs/T4240EMU_defconfig b/configs/T4240EMU_defconfig deleted file mode 100644 index e95151b..0000000 --- a/configs/T4240EMU_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="PPC_T4240" -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_T4240EMU=y diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h deleted file mode 100644 index e8ba5d6..0000000 --- a/include/configs/T4240EMU.h +++ /dev/null @@ -1,181 +0,0 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * T4240 EMU board configuration file - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_T4240EMU -#define CONFIG_PHYS_64BIT - -#define CONFIG_SYS_NO_FLASH 1 -#define CONFIG_SYS_FSL_DDR_EMU 1 -#define CONFIG_SYS_FSL_NO_QIXIS 1 -#define CONFIG_SYS_FSL_NO_SERDES 1 - -#include "t4qds.h" - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CACHE_FLUSH - -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x2000 - -#define CONFIG_SYS_CLK_FREQ 100000000 -#define CONFIG_DDR_CLK_FREQ 133333333 -#define CONFIG_FSL_TBCLK_EXTRA_DIV 100 - -/* - * DDR Setup - */ -#define CONFIG_SYS_SPD_BUS_NUM 1 -#define SPD_EEPROM_ADDRESS1 0x51 -#define SPD_EEPROM_ADDRESS2 0x52 -#define SPD_EEPROM_ADDRESS3 0x53 -#define SPD_EEPROM_ADDRESS4 0x54 -#define SPD_EEPROM_ADDRESS5 0x55 -#define SPD_EEPROM_ADDRESS6 0x56 -#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ -#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ - -/* - * IFC Definitions - */ -#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) -/* NOR Flash Timing Params */ -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ - + 0x8000000) | \ - CSPR_PORT_SIZE_32 | \ - CSPR_MSEL_NOR | \ - CSPR_V) -#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(0) -#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \ - FTIM0_NOR_TEADC(0x1) | \ - FTIM0_NOR_TEAHC(0x1)) -#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \ - FTIM1_NOR_TRAD_NOR(0x1)) -#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \ - FTIM2_NOR_TCH(0x0) | \ - FTIM2_NOR_TWP(0x1)) -#define CONFIG_SYS_NOR_FTIM3 0x04000000 -#define CONFIG_SYS_IFC_CCR 0x01000000 - -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 - -/* I2C */ -#define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */ -#define CONFIG_SYS_FSL_I2C2_SPEED 4000000 - -/* Qman/Bman */ -#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ -#define CONFIG_SYS_BMAN_NUM_PORTALS 50 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 50 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 - -#define CONFIG_SYS_DPAA_FMAN -#define CONFIG_SYS_DPAA_PME -#define CONFIG_SYS_PMAN -#define CONFIG_SYS_DPAA_DCE -#define CONFIG_SYS_DPAA_RMAN -#define CONFIG_SYS_INTERLAKEN - -#define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) - -#define CONFIG_BOOTDELAY 0 - -/* - * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be - * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way - * interleaving. It can be cacheline, page, bank, superbank. - * See doc/README.fsl-ddr for details. - */ -#ifdef CONFIG_PPC_T4240 -#define CTRL_INTLV_PREFERED 3way_4KB -#else -#define CTRL_INTLV_PREFERED cacheline -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:" \ - "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ - "bank_intlv=auto;" \ - "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ -"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=t4240emu/ramdisk.uboot\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=t4240emu/t4240emu.dtb\0" \ - "bdev=sda3\0" - -/* - * For emulation this causes u-boot to jump to the start of the proof point - * app code automatically - */ -#define CONFIG_PROOF_POINTS \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "cpu 1 release 0x29000000 - - -;" \ - "cpu 2 release 0x29000000 - - -;" \ - "cpu 3 release 0x29000000 - - -;" \ - "cpu 4 release 0x29000000 - - -;" \ - "cpu 5 release 0x29000000 - - -;" \ - "cpu 6 release 0x29000000 - - -;" \ - "cpu 7 release 0x29000000 - - -;" \ - "go 0x29000000" - -#define CONFIG_HVBOOT \ - "setenv bootargs config-addr=0x60000000; " \ - "bootm 0x01000000 - 0x00f00000" - -#define CONFIG_LINUX \ - "errata;" \ - "setenv othbootargs ignore_loglevel;" \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_LINUX - -#endif /* __CONFIG_H */