diff --git a/CHANGELOG b/CHANGELOG
index 93caa79..e7fc57c 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,12 @@
 Changes for U-Boot 1.1.3:
 ======================================================================
 
+* Patch by Detlev Zundel, 31 Mar 2005:
+  Cleanup duplicate definition of overwrite_console()
+
+* Update TQM5200 configuration;
+  prepare for Rev. 200 starter kit boards
+
 * Patch by Scott McNutt, 21 Oct 2004:
   Add support for Nios-II EPCS Controller core.
 
diff --git a/common/console.c b/common/console.c
index 8dbd8e3..3c535d2 100644
--- a/common/console.c
+++ b/common/console.c
@@ -39,11 +39,9 @@ int console_changed = 0;
  */
 #ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
 extern int overwrite_console (void);
+#define OVERWRITE_CONSOLE overwrite_console ()
 #else
-int overwrite_console (void)
-{
-	return (0);
-}
+#define OVERWRITE_CONSOLE 0
 #endif /* CFG_CONSOLE_OVERWRITE_ROUTINE */
 
 #endif /* CFG_CONSOLE_IS_IN_ENV */
@@ -429,7 +427,7 @@ int console_init_r (void)
 	stdoutname = getenv ("stdout");
 	stderrname = getenv ("stderr");
 
-	if (overwrite_console () == 0) { /* if not overwritten by config switch */
+	if (OVERWRITE_CONSOLE == 0) { 	/* if not overwritten by config switch */
 		inputdev  = search_device (DEV_FLAGS_INPUT,  stdinname);
 		outputdev = search_device (DEV_FLAGS_OUTPUT, stdoutname);
 		errdev    = search_device (DEV_FLAGS_OUTPUT, stderrname);
diff --git a/drivers/keyboard.c b/drivers/keyboard.c
index f12de83..1579095 100644
--- a/drivers/keyboard.c
+++ b/drivers/keyboard.c
@@ -262,12 +262,10 @@ void handle_scancode(unsigned char scancode)
 
 #ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
 extern int overwrite_console (void);
+#define OVERWRITE_CONSOLE overwrite_console ()
 #else
-int overwrite_console (void)
-{
-	return (0);
-}
-#endif
+#define OVERWRITE_CONSOLE 0
+#endif /* CFG_CONSOLE_OVERWRITE_ROUTINE */
 
 int kbd_init (void)
 {
@@ -290,7 +288,7 @@ int kbd_init (void)
 		/* check if this is the standard input device */
 		if(strcmp(stdinname,DEVNAME)==0) {
 			/* reassign the console */
-			if(overwrite_console()) {
+			if(OVERWRITE_CONSOLE) {
 				return 1;
 			}
 			error=console_assign(stdin,DEVNAME);
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index a5a6344..b33f726 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,6 +37,7 @@
 #define CONFIG_TQM5200		1	/* ... on TQM5200 module */
 #undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules */
 #define CONFIG_STK52XX		1	/* ... on a STK52XX base board */
+#define CONFIG_STK52XX_REV100	1	/*  define for revision 100 baseboards */
 
 #define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
 
@@ -85,6 +86,7 @@
 #define CONFIG_EEPRO100		1
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
+#endif	/* CONFIG_STK52XX */
 
 #ifdef CONFIG_PCI
 #define ADD_PCI_CMD		CFG_CMD_PCI
@@ -105,6 +107,7 @@
 #define CONFIG_CONSOLE_EXTRA_INFO
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
+#define CFG_CONSOLE_IS_IN_ENV
 #endif
 
 #ifdef CONFIG_VIDEO
@@ -373,11 +376,14 @@
  *	Bit 0 (mask: 0x80000000): 1
  * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
  *	00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
- *	      Set for rev 100 modules with an onboard EEPROM (because,
- *	      there I2C1 is used as I2C bus)
  *	01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
- *	      Set for rev 200 modules
+ *	      Use for REV200 STK52XX boards. Do not use with REV100 modules
+ *	      (because, there I2C1 is used as I2C bus)
  * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
+ * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
+ *	000 -> All PSC2 pins are GIOPs
+ *	001 -> CAN1/2 on PSC2 pins
+ *	       Use for REV100 STK52xx boards
  * use PSC6:
  *   on STK52xx:
  *	use as UART. Pins PSC6_0 to PSC6_3 are used.
@@ -392,12 +398,16 @@
 #if defined (CONFIG_MINIFAP)
 # define CFG_GPS_PORT_CONFIG	0x91000004
 #elif defined (CONFIG_STK52XX)
-# if defined (CONFIG_TQM5200_REV100)
-#  define CFG_GPS_PORT_CONFIG	0x81500004
-# else
-#  define CFG_GPS_PORT_CONFIG	0x91500004
+# if defined (CONFIG_STK52XX_REV100)
+#  define CFG_GPS_PORT_CONFIG	0x81500014
+# else /* STK52xx REV200 and above */
+#  if defined (CONFIG_TQM5200_REV100)
+#   error TQM5200 REV100 not supported on STK52XX REV200 or above
+#  else/* TQM5200 REV200 and above */
+#   define CFG_GPS_PORT_CONFIG	0x91500004
+#  endif
 # endif
-#else  /* TMQ5200_IP */
+#else  /* TMQ5200 Inbetriebnahme-Board */
 # define CFG_GPS_PORT_CONFIG	0x81000004
 #endif
 
diff --git a/drivers/sm501.h b/include/sm501.h
similarity index 100%
rename from drivers/sm501.h
rename to include/sm501.h