Fix compiler warnings for ARM systems.

Signed-off-by: Wolfgang Denk <wd@denx.de>

board/mpl/vcma9/flash.c

@@ -290,7 +290,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;

board/mpl/vcma9/vcma9.h

@@ -128,7 +128,7 @@ typedef struct {
 } /*__attribute__((__packed__))*/ VCMA9_PLD;
 
 #define VCMA9_PLD_BASE	0x2C000100
-static inline VCMA9_PLD * const VCMA9_GetBase_PLD(void)
+static inline VCMA9_PLD * VCMA9_GetBase_PLD(void)
 {
 	return (VCMA9_PLD * const)VCMA9_PLD_BASE;
 }

board/pleb2/flash.c

@@ -196,7 +196,7 @@ void flash_print_info (flash_info_t * info)
 	int i;
 	uchar *boottype;
 	uchar *bootletter;
-	uchar *fmt;
+	char *fmt;
 	uchar botbootletter[] = "B";
 	uchar topbootletter[] = "T";
 	uchar botboottype[] = "bottom boot sector";

board/sbc2410x/flash.c

@@ -288,7 +288,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;

board/smdk2410/flash.c

@@ -290,7 +290,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;

board/wepep250/flash.c

@@ -44,6 +44,7 @@
 
 #if ( WEP_FLASH_BUS_WIDTH == 1 )
 #  define FLASH_BUS vu_char
+#  define FLASH_BUS_RET u_char
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  else
@@ -53,6 +54,7 @@
 
 #elif ( WEP_FLASH_BUS_WIDTH == 2 )
 #  define FLASH_BUS vu_short
+#  define FLASH_BUS_RET u_short
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  elif ( WEP_FLASH_INTERLEAVE == 2 )
@@ -64,6 +66,7 @@
 
 #elif ( WEP_FLASH_BUS_WIDTH == 4 )
 #  define FLASH_BUS vu_long
+#  define FLASH_BUS_RET u_long
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  elif ( WEP_FLASH_INTERLEAVE == 2 )
@@ -81,7 +84,7 @@
 
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
-static FLASH_BUS flash_status_reg (void)
+static FLASH_BUS_RET flash_status_reg (void)
 {
 
 	FLASH_BUS *addr = (FLASH_BUS *) 0;

cpu/pxa/i2c.c

@@ -457,7 +457,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
 
 uchar i2c_reg_read (uchar chip, uchar reg)
 {
-	char buf;
+	uchar buf;
 
 	PRINTD(("i2c_reg_read(chip=0x%02x, reg=0x%02x)\n",chip,reg));
 	i2c_read(chip, reg, 1, &buf, 1);

drivers/s3c4510b_eth.c

@@ -175,7 +175,7 @@ s32 eth_send(volatile void *packet, s32 length)
 	}
 
 	/* copy user data into frame data pointer */
-	memcpy((void *)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr),
+	memcpy((void *)((u32)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr)),
 	       (void *)packet,
 	       length);