Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

README: mx28_common: Keep the text within 80 columns

Browse Source 
In order to improve readability keep the text within 80 columns.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
master
Fabio Estevam 12 years ago committed by Stefano Babic
parent 262326b4c3
commit 84286c22e6
1 changed files with 5 additions and 5 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 10
      doc/README.mx28_common

10
doc/README.mx28_common
Unescape View File

@ -63,9 +63,9 @@ means "/usr/local/bin/" has to be in your $PATH.
2) Compiling U-Boot for a MX28 based board
-------------------------------------------
Compiling the U-Boot for a MX28 board is straightforward and done as compiling U-Boot
for any other ARM device. For cross-compiler setup, please refer to ELDK5.0
documentation. First, clean up the source code:
Compiling the U-Boot for a MX28 board is straightforward and done as compiling
U-Boot for any other ARM device. For cross-compiler setup, please refer to
ELDK5.0 documentation. First, clean up the source code:
$ make mrproper
@ -150,8 +150,8 @@ NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains
4) Installation of U-Boot into NAND flash
-----------------------------------------
To boot a MX28 based board from NAND, set the boot mode DIP switches according to i.MX28
manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
To boot a MX28 based board from NAND, set the boot mode DIP switches according
to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
There are two possibilities when preparing an image writable to NAND flash.

Write Preview
Loading…
Cancel
Save