From 843efb1192cc8fd4f904a23dbab4e0fe3e1c5bc2 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sat, 16 May 2009 10:47:43 +0200 Subject: [PATCH] MPC512x: use I/O accessors instead of pointer accesses This commit changes the MPC512x code to use I/O accessor calls (i.e. out_*() and in_*()) instead of using deprecated pointer accesses. Signed-off-by: Wolfgang Denk Cc: John Rigby --- board/freescale/mpc5121ads/mpc5121ads.c | 177 +++++++++++++++++--------------- cpu/mpc512x/cpu_init.c | 26 +++-- cpu/mpc512x/i2c.c | 56 +++++----- cpu/mpc512x/ide.c | 52 +++++----- cpu/mpc512x/iopin.c | 6 +- cpu/mpc512x/pci.c | 71 ++++++++----- cpu/mpc512x/serial.c | 64 ++++++------ cpu/mpc512x/speed.c | 23 +++-- drivers/net/mpc512x_fec.c | 113 +++++++++++--------- 9 files changed, 324 insertions(+), 264 deletions(-) diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index 4ff03ca..102e6ff 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 DENX Software Engineering + * (C) Copyright 2007-2009 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -22,9 +22,9 @@ */ #include -#include #include #include +#include #include #include #ifdef CONFIG_MISC_INIT_R @@ -34,6 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; extern int mpc5121_diu_init(void); +extern void ide_set_reset(int idereset); /* Clocks in use */ #define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ @@ -59,22 +60,24 @@ long int fixed_sdram(void); int board_early_init_f (void) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 lpcaw; + u32 lpcaw, spridr; /* * Initialize Local Window for the CPLD registers access (CS2 selects * the CPLD chip) */ - im->sysconf.lpcs2aw = CSAW_START(CONFIG_SYS_CPLD_BASE) | - CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE); - im->lpc.cs_cfg[2] = CONFIG_SYS_CS2_CFG; + out_be32(&im->sysconf.lpcs2aw, + CSAW_START(CONFIG_SYS_CPLD_BASE) | + CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE) + ); + out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG); /* * According to MPC5121e RM, configuring local access windows should * be followed by a dummy read of the config register that was * modified last and an isync */ - lpcaw = im->sysconf.lpcs2aw; + lpcaw = in_be32(&im->sysconf.lpcs6aw); __asm__ __volatile__ ("isync"); /* @@ -85,29 +88,32 @@ int board_early_init_f (void) */ #ifdef CONFIG_ADS5121_REV2 - *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1; + out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1); #else - if (*((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) { - *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1; + if (in_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) { + out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1); } else { /* running from Backup flash */ - *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0x32; + out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32); } #endif /* * Configure Flash Speed */ - *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS0_CONFIG)) = CONFIG_SYS_CS0_CFG; - if (SVR_MJREV (im->sysconf.spridr) >= 2) { - *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CONFIG_SYS_CS_ALETIMING; - } + out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG); + + spridr = in_be32(&im->sysconf.spridr); + + if (SVR_MJREV (spridr) >= 2) + out_be32 (&im->lpc.altr, CONFIG_SYS_CS_ALETIMING); + /* * Enable clocks */ - im->clk.sccr[0] = SCCR1_CLOCKS_EN; - im->clk.sccr[1] = SCCR2_CLOCKS_EN; + out_be32 (&im->clk.sccr[0], SCCR1_CLOCKS_EN); + out_be32 (&im->clk.sccr[1], SCCR2_CLOCKS_EN); #if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE) - im->clk.sccr[1] |= CLOCK_SCCR2_IIM_EN; + setbits_be32 (&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN); #endif return 0; @@ -134,83 +140,83 @@ long int fixed_sdram (void) u32 i; /* Initialize IO Control */ - im->io_ctrl.io_control_mem = IOCTRL_MUX_DDR; + out_be32 (&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR); /* Initialize DDR Local Window */ - im->sysconf.ddrlaw.bar = CONFIG_SYS_DDR_BASE & 0xFFFFF000; - im->sysconf.ddrlaw.ar = msize_log2 - 1; + out_be32 (&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000); + out_be32 (&im->sysconf.ddrlaw.ar, msize_log2 - 1); /* * According to MPC5121e RM, configuring local access windows should * be followed by a dummy read of the config register that was * modified last and an isync */ - i = im->sysconf.ddrlaw.ar; + in_be32(&im->sysconf.ddrlaw.ar); __asm__ __volatile__ ("isync"); /* Enable DDR */ - im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_EN; + out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN); /* Initialize DDR Priority Manager */ - im->mddrc.prioman_config1 = CONFIG_SYS_MDDRCGRP_PM_CFG1; - im->mddrc.prioman_config2 = CONFIG_SYS_MDDRCGRP_PM_CFG2; - im->mddrc.hiprio_config = CONFIG_SYS_MDDRCGRP_HIPRIO_CFG; - im->mddrc.lut_table0_main_upper = CONFIG_SYS_MDDRCGRP_LUT0_MU; - im->mddrc.lut_table0_main_lower = CONFIG_SYS_MDDRCGRP_LUT0_ML; - im->mddrc.lut_table1_main_upper = CONFIG_SYS_MDDRCGRP_LUT1_MU; - im->mddrc.lut_table1_main_lower = CONFIG_SYS_MDDRCGRP_LUT1_ML; - im->mddrc.lut_table2_main_upper = CONFIG_SYS_MDDRCGRP_LUT2_MU; - im->mddrc.lut_table2_main_lower = CONFIG_SYS_MDDRCGRP_LUT2_ML; - im->mddrc.lut_table3_main_upper = CONFIG_SYS_MDDRCGRP_LUT3_MU; - im->mddrc.lut_table3_main_lower = CONFIG_SYS_MDDRCGRP_LUT3_ML; - im->mddrc.lut_table4_main_upper = CONFIG_SYS_MDDRCGRP_LUT4_MU; - im->mddrc.lut_table4_main_lower = CONFIG_SYS_MDDRCGRP_LUT4_ML; - im->mddrc.lut_table0_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT0_AU; - im->mddrc.lut_table0_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT0_AL; - im->mddrc.lut_table1_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT1_AU; - im->mddrc.lut_table1_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT1_AL; - im->mddrc.lut_table2_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT2_AU; - im->mddrc.lut_table2_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT2_AL; - im->mddrc.lut_table3_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT3_AU; - im->mddrc.lut_table3_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT3_AL; - im->mddrc.lut_table4_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT4_AU; - im->mddrc.lut_table4_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT4_AL; + out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1); + out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2); + out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG); + out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU); + out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML); + out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU); + out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML); + out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU); + out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML); + out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU); + out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML); + out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU); + out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML); + out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU); + out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL); + out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU); + out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL); + out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU); + out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL); + out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU); + out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL); + out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU); + out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL); /* Initialize MDDRC */ - im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG; - im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0; - im->mddrc.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1; - im->mddrc.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2; + out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG); + out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0); + out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1); + out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2); /* Initialize DDR */ for (i = 0; i < 10; i++) - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM3; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EN_DLL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_OCD_DEFAULT; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); /* Start MDDRC */ - im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0_RUN; - im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_RUN; + out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN); + out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN); return msize; } @@ -249,49 +255,49 @@ int misc_init_r(void) static iopin_t ioregs_init[] = { /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */ { - IOCTL_SPDIF_TXCLK, 3, 0, + offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0, IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) }, /* Set highest Slew on 9 PATA pins */ { - IOCTL_PATA_CE1, 9, 1, + offsetof(struct ioctrl512x, io_control_pata_ce1), 9, 1, IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) }, /* FUNC1=FEC_COL Sets Next 15 to FEC pads */ { - IOCTL_PSC0_0, 15, 0, + offsetof(struct ioctrl512x, io_control_psc0_0), 15, 0, IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) }, /* FUNC1=SPDIF_TXCLK */ { - IOCTL_LPC_CS1, 1, 0, + offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, 0, IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) }, /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */ { - IOCTL_I2C1_SCL, 2, 0, + offsetof(struct ioctrl512x, io_control_i2c1_scl), 2, 0, IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) }, /* FUNC2=DIU CLK */ { - IOCTL_PSC6_0, 1, 0, + offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0, IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) }, /* FUNC2=DIU_HSYNC */ { - IOCTL_PSC6_1, 1, 0, + offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0, IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) }, /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */ { - IOCTL_PSC6_4, 26, 0, + offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0, IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) } @@ -300,7 +306,7 @@ static iopin_t ioregs_init[] = { static iopin_t rev2_silicon_pci_ioregs_init[] = { /* FUNC0=PCI Sets next 54 to PCI pads */ { - IOCTL_PCI_AD31, 54, 0, + offsetof(struct ioctrl512x, io_control_pci_ad31), 54, 0, IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0) } }; @@ -310,6 +316,7 @@ int checkboard (void) ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00); uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02); volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + u32 spridr = in_be32(&im->sysconf.spridr); printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n", brd_rev, cpld_rev); @@ -317,7 +324,7 @@ int checkboard (void) /* initialize function mux & slew rate IO inter alia on IO Pins */ iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init)); - if (SVR_MJREV (im->sysconf.spridr) >= 2) + if (SVR_MJREV (spridr) >= 2) iopin_initialize(rev2_silicon_pci_ioregs_init, 1); return 0; diff --git a/cpu/mpc512x/cpu_init.c b/cpu/mpc512x/cpu_init.c index fa753c8..69ec871 100644 --- a/cpu/mpc512x/cpu_init.c +++ b/cpu/mpc512x/cpu_init.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. - * (C) Copyright 2007 DENX Software Engineering + * Copyright (C) 2007-2009 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -26,6 +26,8 @@ #include #include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -46,30 +48,34 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ - im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | - (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT); + out_be32(&im->arbiter.acr, + (im->arbiter.acr & ~ACR_PIPE_DEP) | + (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) + ); #endif #ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ - im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | - (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT)); + out_be32(im->arbiter.acr, + (im->arbiter.acr & ~(ACR_RPTCNT)) | + (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) + ); #endif /* RSR - Reset Status Register - clear all status */ gd->reset_status = im->reset.rsr; - im->reset.rsr = ~(RSR_RES); + out_be32(&im->reset.rsr, ~RSR_RES); /* * RMR - Reset Mode Register - enable checkstop reset */ - im->reset.rmr = (RMR_CSRE & (1 << RMR_CSRE_SHIFT)); + out_be32(&im->reset.rmr, RMR_CSRE & (1 << RMR_CSRE_SHIFT)); /* Set IPS-CSB divider: IPS = 1/2 CSB */ - ips_div = im->clk.scfr[0]; + ips_div = in_be32(&im->clk.scfr[0]); ips_div &= ~(SCFR1_IPS_DIV_MASK); ips_div |= SCFR1_IPS_DIV << SCFR1_IPS_DIV_SHIFT; - im->clk.scfr[0] = ips_div; + out_be32(&im->clk.scfr[0], ips_div); /* * Enable Time Base/Decrementer @@ -78,7 +84,7 @@ void cpu_init_f (volatile immap_t * im) * have udelay() working; if not enabled, usually leads to a hang, like * during FLASH chip identification etc. */ - im->sysconf.spcr |= SPCR_TBEN; + setbits_be32(&im->sysconf.spcr, SPCR_TBEN); } int cpu_init_r (void) diff --git a/cpu/mpc512x/i2c.c b/cpu/mpc512x/i2c.c index 0da906a..4a3f9a0 100644 --- a/cpu/mpc512x/i2c.c +++ b/cpu/mpc512x/i2c.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2003 - 2007 + * (C) Copyright 2003 - 2009 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -24,6 +24,7 @@ */ #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -32,8 +33,6 @@ DECLARE_GLOBAL_DATA_PTR; #include #include -#define immr ((immap_t *)CONFIG_SYS_IMMR) - /* by default set I2C bus 0 active */ static unsigned int bus_num = 0; @@ -56,29 +55,24 @@ static int mpc_get_fdr(int); static int mpc_reg_in (volatile u32 *reg) { - int ret = *reg >> 24; - __asm__ __volatile__ ("eieio"); + int ret = in_be32(reg) >> 24; + return ret; } static void mpc_reg_out (volatile u32 *reg, int val, int mask) { - int tmp; - if (!mask) { - *reg = val << 24; + out_be32(reg, val << 24); } else { - tmp = mpc_reg_in (reg); - *reg = ((tmp & ~mask) | (val & mask)) << 24; + clrsetbits_be32(reg, mask << 24, (val & mask) << 24); } - __asm__ __volatile__ ("eieio"); - - return; } static int wait_for_bb (void) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int timeout = I2C_TIMEOUT; int status; @@ -101,7 +95,8 @@ static int wait_for_bb (void) static int wait_for_pin (int *status) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int timeout = I2C_TIMEOUT; *status = mpc_reg_in (®s->msr); @@ -122,7 +117,8 @@ static int wait_for_pin (int *status) static int do_address (uchar chip, char rdwr_flag) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int status; chip <<= 1; @@ -147,7 +143,8 @@ static int do_address (uchar chip, char rdwr_flag) static int send_bytes (uchar chip, char *buf, int len) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int wrcount; int status; @@ -170,7 +167,8 @@ static int send_bytes (uchar chip, char *buf, int len) static int receive_bytes (uchar chip, char *buf, int len) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int dummy = 1; int rdcount = 0; int status; @@ -208,9 +206,12 @@ static int receive_bytes (uchar chip, char *buf, int len) void i2c_init (int speed, int saddr) { + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; int i; - for(i = 0; i < I2C_BUS_CNT; i++){ - i2c512x_dev_t *regs = &immr->i2c.dev[i]; + + for (i = 0; i < I2C_BUS_CNT; i++){ + volatile i2c512x_dev_t *regs = &im->i2c.dev[i]; + mpc_reg_out (®s->mcr, 0, 0); /* Set clock */ @@ -223,10 +224,10 @@ void i2c_init (int speed, int saddr) } /* Disable interrupts */ - immr->i2c.icr = 0; + out_be32(&im->i2c.icr, 0); + /* Turn off filters */ - immr->i2c.mifr = 0; - return; + out_be32(&im->i2c.mifr, 0); } static int mpc_get_fdr (int speed) @@ -281,7 +282,8 @@ static int mpc_get_fdr (int speed) int i2c_probe (uchar chip) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int i; for (i = 0; i < I2C_RETRIES; i++) { @@ -302,8 +304,9 @@ int i2c_probe (uchar chip) int i2c_read (uchar chip, uint addr, int alen, uchar *buf, int len) { + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; char xaddr[4]; - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; int ret = -1; xaddr[0] = (addr >> 24) & 0xFF; @@ -346,8 +349,9 @@ Done: int i2c_write (uchar chip, uint addr, int alen, uchar *buf, int len) { + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; char xaddr[4]; - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; int ret = -1; xaddr[0] = (addr >> 24) & 0xFF; diff --git a/cpu/mpc512x/ide.c b/cpu/mpc512x/ide.c index 16f1a01..dd6b2f4 100644 --- a/cpu/mpc512x/ide.c +++ b/cpu/mpc512x/ide.c @@ -23,47 +23,46 @@ #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_IDE_RESET) +void ide_set_reset (int idereset) +{ + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + debug ("ide_set_reset(%d)\n", idereset); + + if (idereset) { + out_be32(&im->pata.pata_ata_control, 0); + } else { + out_be32(&im->pata.pata_ata_control, FSL_ATA_CTRL_ATA_RST_B); + } + udelay(100); +} + void init_ide_reset (void) { - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; debug ("init_ide_reset\n"); /* * Clear the reset bit to reset the interface * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus */ - immr->pata.pata_ata_control = 0; - udelay(100); - /* Assert the reset bit to enable the interface */ - immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B; - udelay(100); -} + ide_set_reset(1); -void ide_set_reset (int idereset) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - debug ("ide_set_reset(%d)\n", idereset); + /* Assert the reset bit to enable the interface */ + ide_set_reset(0); - if (idereset) { - immr->pata.pata_ata_control = 0; - udelay(100); - } else { - immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B; - udelay(100); - } } #define CALC_TIMING(t) (t + period - 1) / period int ide_preinit (void) { - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; long t; const struct { short t0; @@ -92,13 +91,13 @@ int ide_preinit (void) u8 field3; u8 field4; }bytes; - }cfg; + } cfg; debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n", - (u32)&immr->pata); + (u32)&im->pata); /* Set the reset bit to 1 to enable the interface */ - immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B; + ide_set_reset(0); /* Init timings : we use PIO mode 0 timings */ t = 1000000000 / gd->ips_clk; /* period in ns */ @@ -107,19 +106,20 @@ int ide_preinit (void) cfg.bytes.field3 = (pio_specs.t1 + t) / t; cfg.bytes.field4 = (pio_specs.t2_8 + t) / t; - immr->pata.pata_time1 = cfg.config; + out_be32(&im->pata.pata_time1, cfg.config); cfg.bytes.field1 = (pio_specs.t2_8 + t) / t; cfg.bytes.field2 = (pio_specs.tA + t) / t + 2; cfg.bytes.field3 = 1; cfg.bytes.field4 = (pio_specs.t4 + t) / t; - immr->pata.pata_time2 = cfg.config; + out_be32(&im->pata.pata_time2, cfg.config); - cfg.config = immr->pata.pata_time3; + cfg.config = in_be32(&im->pata.pata_time3); cfg.bytes.field1 = (pio_specs.t9 + t) / t; - immr->pata.pata_time3 = cfg.config; + out_be32(&im->pata.pata_time3, cfg.config); + debug ("PATA preinit complete.\n"); return 0; diff --git a/cpu/mpc512x/iopin.c b/cpu/mpc512x/iopin.c index befa586..be20947 100644 --- a/cpu/mpc512x/iopin.c +++ b/cpu/mpc512x/iopin.c @@ -23,7 +23,7 @@ #include #include -#include +#include void iopin_initialize(iopin_t *ioregs_init, int len) { @@ -40,9 +40,9 @@ void iopin_initialize(iopin_t *ioregs_init, int len) for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long); p < ioregs_init[i].nr_pins; p++, j++) { if (ioregs_init[i].bit_or) - reg[j] |= ioregs_init[i].val; + setbits_be32(reg + j, ioregs_init[i].val); else - reg[j] = ioregs_init[i].val; + out_be32 (reg + j, ioregs_init[i].val); } } return; diff --git a/cpu/mpc512x/pci.c b/cpu/mpc512x/pci.c index 3c63592..166a993 100644 --- a/cpu/mpc512x/pci.c +++ b/cpu/mpc512x/pci.c @@ -1,5 +1,6 @@ /* * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007. All rights reserved. + * Copyright (C) 2009 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -22,6 +23,7 @@ #include +#include #include #include #include @@ -46,7 +48,7 @@ static struct pci_controller pci_hose; void pci_init_board(void) { - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile law512x_t *pci_law; volatile pot512x_t *pci_pot; volatile pcictrl512x_t *pci_ctrl; @@ -58,24 +60,29 @@ pci_init_board(void) struct pci_controller *hose; /* Set PCI divider for 33MHz */ - reg32 = immr->clk.scfr[0]; + reg32 = im->clk.scfr[0]; reg32 &= ~(SCFR1_PCI_DIV_MASK); reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT; - immr->clk.scfr[0] = reg32; + im->clk.scfr[0] = reg32; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = &immr->pci_ctrl; - pci_conf = &immr->pci_conf; + clrsetbits_be32(&im->clk.scfr[0], + SCFR1_PCI_DIV_MASK, + SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT + ); + + pci_law = im->sysconf.pcilaw; + pci_pot = im->ios.pot; + pci_ctrl = &im->pci_ctrl; + pci_conf = &im->pci_conf; hose = &pci_hose; /* * Release PCI RST Output signal */ - pci_ctrl->gcr = 0; + out_be32(&pci_ctrl->gcr, 0); udelay(2000); - pci_ctrl->gcr = 1; + out_be32(&pci_ctrl->gcr, 1); /* We need to wait at least a 1sec based on PCI specs */ for (i = 0; i < 1000; i++) @@ -84,30 +91,39 @@ pci_init_board(void) /* * Configure PCI Local Access Windows */ - pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; + out_be32(&pci_law[0].bar, CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR); + out_be32(&pci_law[0].ar, LAWAR_EN | LAWAR_SIZE_512M); - pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M; + out_be32(&pci_law[1].bar, CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR); + out_be32(&pci_law[1].ar, LAWAR_EN | LAWAR_SIZE_16M); /* * Configure PCI Outbound Translation Windows */ /* PCI mem space - prefetch */ - pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = POCMR_EN | POCMR_PRE | POCMR_CM_256M; + out_be32(&pci_pot[0].potar, + (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK); + out_be32(&pci_pot[0].pobar, + (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK); + out_be32(&pci_pot[0].pocmr, + POCMR_EN | POCMR_PRE | POCMR_CM_256M); /* PCI IO space */ - pci_pot[1].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M; + out_be32(&pci_pot[1].potar, + (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK); + out_be32(&pci_pot[1].pobar, + (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK); + out_be32(&pci_pot[1].pocmr, + POCMR_EN | POCMR_IO | POCMR_CM_16M); /* PCI mmio - non-prefetch mem space */ - pci_pot[2].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M; + out_be32(&pci_pot[2].potar, + (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK); + out_be32(&pci_pot[2].pobar, + (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK); + out_be32(&pci_pot[2].pocmr, + POCMR_EN | POCMR_CM_256M); /* * Configure PCI Inbound Translation Windows @@ -115,11 +131,12 @@ pci_init_board(void) /* we need RAM mapped to PCI space for the devices to * access main memory */ - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | - PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + out_be32(&pci_ctrl[0].pitar1, 0x0); + out_be32(&pci_ctrl[0].pibar1, 0x0); + out_be32(&pci_ctrl[0].piebar1, 0x0); + out_be32(&pci_ctrl[0].piwar1, + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1)); hose->first_busno = 0; hose->last_busno = 0xff; diff --git a/cpu/mpc512x/serial.c b/cpu/mpc512x/serial.c index 7db87a8..16ce770 100644 --- a/cpu/mpc512x/serial.c +++ b/cpu/mpc512x/serial.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000 - 2007 + * (C) Copyright 2000 - 2009 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -30,6 +30,8 @@ */ #include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -40,21 +42,21 @@ static void fifo_init (volatile psc512x_t *psc) volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; /* reset Rx & Tx fifo slice */ - psc->rfcmd = PSC_FIFO_RESET_SLICE; - psc->tfcmd = PSC_FIFO_RESET_SLICE; + out_be32(&psc->rfcmd, PSC_FIFO_RESET_SLICE); + out_be32(&psc->tfcmd, PSC_FIFO_RESET_SLICE); /* disable Tx & Rx FIFO interrupts */ - psc->rfintmask = 0; - psc->tfintmask = 0; + out_be32(&psc->rfintmask, 0); + out_be32(&psc->tfintmask, 0); - psc->tfsize = CONSOLE_FIFO_TX_SIZE | (CONSOLE_FIFO_TX_ADDR << 16); - psc->rfsize = CONSOLE_FIFO_RX_SIZE | (CONSOLE_FIFO_RX_ADDR << 16); + out_be32(&psc->tfsize, CONSOLE_FIFO_TX_SIZE | (CONSOLE_FIFO_TX_ADDR << 16)); + out_be32(&psc->rfsize, CONSOLE_FIFO_RX_SIZE | (CONSOLE_FIFO_RX_ADDR << 16)); /* enable Tx & Rx FIFO slice */ - psc->rfcmd = PSC_FIFO_ENABLE_SLICE; - psc->tfcmd = PSC_FIFO_ENABLE_SLICE; + out_be32(&psc->rfcmd, PSC_FIFO_ENABLE_SLICE); + out_be32(&psc->tfcmd, PSC_FIFO_ENABLE_SLICE); - im->fifoc.fifoc_cmd = FIFOC_DISABLE_CLOCK_GATE; + out_be32(&im->fifoc.fifoc_cmd, FIFOC_DISABLE_CLOCK_GATE); __asm__ volatile ("sync"); } @@ -68,38 +70,38 @@ int serial_init(void) fifo_init (psc); /* set MR register to point to MR1 */ - psc->command = PSC_SEL_MODE_REG_1; + out_8(&psc->command, PSC_SEL_MODE_REG_1); /* disable Tx/Rx */ - psc->command = PSC_TX_DISABLE | PSC_RX_DISABLE; + out_8(&psc->command, PSC_TX_DISABLE | PSC_RX_DISABLE); /* choose the prescaler by 16 for the Tx/Rx clock generation */ - psc->psc_clock_select = 0xdd00; + out_be16(&psc->psc_clock_select, 0xdd00); /* switch to UART mode */ - psc->sicr = 0; + out_be32(&psc->sicr, 0); /* mode register points to mr1 */ /* configure parity, bit length and so on in mode register 1*/ - psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; + out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE); /* now, mode register points to mr2 */ - psc->mode = PSC_MODE_1_STOPBIT; + out_8(&psc->mode, PSC_MODE_1_STOPBIT); /* calculate dividor for setting PSC CTUR and CTLR registers */ baseclk = (gd->ips_clk + 8) / 16; div = (baseclk + (gd->baudrate / 2)) / gd->baudrate; - psc->ctur = (div >> 8) & 0xff; + out_8(&psc->ctur, (div >> 8) & 0xff); /* set baudrate */ - psc->ctlr = div & 0xff; + out_8(&psc->ctlr, div & 0xff); /* disable all interrupts */ - psc->psc_imr = 0; + out_be16(&psc->psc_imr, 0); /* reset and enable Rx/Tx */ - psc->command = PSC_RST_RX; - psc->command = PSC_RST_TX; - psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE; + out_8(&psc->command, PSC_RST_RX); + out_8(&psc->command, PSC_RST_TX); + out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE); return 0; } @@ -113,7 +115,7 @@ void serial_putc (const char c) serial_putc ('\r'); /* Wait for last character to go. */ - while (!(psc->psc_status & PSC_SR_TXEMP)) + while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP)) ; psc->tfdata_8 = c; @@ -125,7 +127,7 @@ void serial_putc_raw (const char c) volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; /* Wait for last character to go. */ - while (!(psc->psc_status & PSC_SR_TXEMP)) + while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP)) ; psc->tfdata_8 = c; @@ -145,7 +147,7 @@ int serial_getc (void) volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; /* Wait for a character to arrive. */ - while (psc->rfstat & PSC_FIFO_EMPTY) + while (in_be32(&psc->rfstat) & PSC_FIFO_EMPTY) ; return psc->rfdata_8; @@ -156,7 +158,7 @@ int serial_tstc (void) volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; - return !(psc->rfstat & PSC_FIFO_EMPTY); + return !(in_be32(&psc->rfstat) & PSC_FIFO_EMPTY); } void serial_setbrg (void) @@ -168,8 +170,8 @@ void serial_setbrg (void) baseclk = (gd->csb_clk + 8) / 16; div = (baseclk + (gd->baudrate / 2)) / gd->baudrate; - psc->ctur = (div >> 8) & 0xFF; - psc->ctlr = div & 0xff; /* set baudrate */ + out_8(&psc->ctur, (div >> 8) & 0xFF); + out_8(&psc->ctlr, div & 0xff); /* set baudrate */ } void serial_setrts(int s) @@ -179,11 +181,11 @@ void serial_setrts(int s) if (s) { /* Assert RTS (become LOW) */ - psc->op1 = 0x1; + out_8(&psc->op1, 0x1); } else { /* Negate RTS (become HIGH) */ - psc->op0 = 0x1; + out_8(&psc->op0, 0x1); } } @@ -192,6 +194,6 @@ int serial_getcts(void) volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; - return (psc->ip & 0x1) ? 0 : 1; + return (in_8(&psc->ip) & 0x1) ? 0 : 1; } #endif /* CONFIG_PSC_CONSOLE */ diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c index 1f90862..0fec004 100644 --- a/cpu/mpc512x/speed.c +++ b/cpu/mpc512x/speed.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2007 + * (C) Copyright 2000-2009 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. @@ -28,6 +28,7 @@ #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -75,29 +76,37 @@ int get_clocks (void) u32 csb_clk; u32 ips_clk; u32 pci_clk; + u32 reg; - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + reg = in_be32(&im->sysconf.immrbar); + if ((reg & IMMRBAR_BASE_ADDR) != (u32) im) return -1; - spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT; + reg = in_be32(&im->clk.spmr); + spmf = (reg & SPMR_SPMF) >> SPMR_SPMF_SHIFT; spll = ref_clk * spmf_mult[spmf]; - sys_div = (im->clk.scfr[1] & SCFR2_SYS_DIV) >> SCFR2_SYS_DIV_SHIFT; + reg = in_be32(&im->clk.scfr[1]); + sys_div = (reg & SCFR2_SYS_DIV) >> SCFR2_SYS_DIV_SHIFT; sys_clk = (spll * sys_dividors[sys_div][1]) / sys_dividors[sys_div][0]; csb_clk = sys_clk / 2; - cpmf = (im->clk.spmr & SPMR_CPMF) >> SPMR_CPMF_SHIFT; + reg = in_be32(&im->clk.spmr); + cpmf = (reg & SPMR_CPMF) >> SPMR_CPMF_SHIFT; core_clk = (csb_clk * cpmf_mult[cpmf][0]) / cpmf_mult[cpmf][1]; - ips_div = (im->clk.scfr[0] & SCFR1_IPS_DIV_MASK) >> SCFR1_IPS_DIV_SHIFT; + reg = in_be32(&im->clk.scfr[0]); + ips_div = (reg & SCFR1_IPS_DIV_MASK) >> SCFR1_IPS_DIV_SHIFT; if (ips_div != 0) { ips_clk = csb_clk / ips_div; } else { /* in case we cannot get a sane IPS divisor, fail gracefully */ ips_clk = 0; } - pci_div = (im->clk.scfr[0] & SCFR1_PCI_DIV_MASK) >> SCFR1_PCI_DIV_SHIFT; + + reg = in_be32(&im->clk.scfr[0]); + pci_div = (reg & SCFR1_PCI_DIV_MASK) >> SCFR1_PCI_DIV_SHIFT; if (pci_div != 0) { pci_clk = csb_clk / pci_div; } else { diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c index 7078c4e..54225e1 100644 --- a/drivers/net/mpc512x_fec.c +++ b/drivers/net/mpc512x_fec.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "mpc512x_fec.h" DECLARE_GLOBAL_DATA_PTR; @@ -66,7 +67,8 @@ static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec) * Receive BDs init */ for (ix = 0; ix < FEC_RBD_NUM; ix++) { - fec->bdBase->rbd[ix].dataPointer = (uint32)&fec->bdBase->recv_frames[ix]; + fec->bdBase->rbd[ix].dataPointer = + (uint32)&fec->bdBase->recv_frames[ix]; fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY; fec->bdBase->rbd[ix].dataLength = 0; } @@ -119,8 +121,9 @@ static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRb /* * Now, we have an empty RxBD, notify FEC + * Set Descriptor polling active */ - fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ + out_be32(&fec->eth->r_des_active, 0x01000000); } /********************************************************************/ @@ -203,18 +206,20 @@ static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac) * Set individual hash table register */ if (crc >= 32) { - fec->eth->iaddr1 = (1 << (crc - 32)); - fec->eth->iaddr2 = 0; + out_be32(&fec->eth->iaddr1, (1 << (crc - 32))); + out_be32(&fec->eth->iaddr2, 0); } else { - fec->eth->iaddr1 = 0; - fec->eth->iaddr2 = (1 << crc); + out_be32(&fec->eth->iaddr1, 0); + out_be32(&fec->eth->iaddr2, (1 << crc)); } /* * Set physical address */ - fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; - fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; + out_be32(&fec->eth->paddr1, (mac[0] << 24) + (mac[1] << 16) + + (mac[2] << 8) + mac[3]); + out_be32(&fec->eth->paddr2, (mac[4] << 24) + (mac[5] << 16) + + 0x8808); } /********************************************************************/ @@ -227,45 +232,45 @@ static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) #endif /* Set interrupt mask register */ - fec->eth->imask = 0x00000000; + out_be32(&fec->eth->imask, 0x00000000); /* Clear FEC-Lite interrupt event register(IEVENT) */ - fec->eth->ievent = 0xffffffff; + out_be32(&fec->eth->ievent, 0xffffffff); /* Set transmit fifo watermark register(X_WMRK), default = 64 */ - fec->eth->x_wmrk = 0x0; + out_be32(&fec->eth->x_wmrk, 0x0); /* Set Opcode/Pause Duration Register */ - fec->eth->op_pause = 0x00010020; + out_be32(&fec->eth->op_pause, 0x00010020); /* Frame length=1522; MII mode */ - fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24; + out_be32(&fec->eth->r_cntrl, (FEC_MAX_FRAME_LEN << 16) | 0x24); /* Half-duplex, heartbeat disabled */ - fec->eth->x_cntrl = 0x00000000; + out_be32(&fec->eth->x_cntrl, 0x00000000); /* Enable MIB counters */ - fec->eth->mib_control = 0x0; + out_be32(&fec->eth->mib_control, 0x0); /* Setup recv fifo start and buff size */ - fec->eth->r_fstart = 0x500; - fec->eth->r_buff_size = FEC_BUFFER_SIZE; + out_be32(&fec->eth->r_fstart, 0x500); + out_be32(&fec->eth->r_buff_size, FEC_BUFFER_SIZE); /* Setup BD base addresses */ - fec->eth->r_des_start = (uint32)fec->bdBase->rbd; - fec->eth->x_des_start = (uint32)fec->bdBase->tbd; + out_be32(&fec->eth->r_des_start, (uint32)fec->bdBase->rbd); + out_be32(&fec->eth->x_des_start, (uint32)fec->bdBase->tbd); /* DMA Control */ - fec->eth->dma_control = 0xc0000000; + out_be32(&fec->eth->dma_control, 0xc0000000); /* Enable FEC */ - fec->eth->ecntrl |= 0x00000006; + setbits_be32(&fec->eth->ecntrl, 0x00000006); /* Initilize addresses and status words of BDs */ mpc512x_fec_bd_init (fec); /* Descriptor polling active */ - fec->eth->r_des_active = 0x01000000; + out_be32(&fec->eth->r_des_active, 0x01000000); #if (DEBUG & 0x1) printf("mpc512x_fec_init... Done \n"); @@ -288,19 +293,20 @@ int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) /* * Clear FEC-Lite interrupt event register(IEVENT) */ - fec->eth->ievent = 0xffffffff; + out_be32(&fec->eth->ievent, 0xffffffff); /* * Set interrupt mask register */ - fec->eth->imask = 0x00000000; + out_be32(&fec->eth->imask, 0x00000000); if (fec->xcv_type != SEVENWIRE) { /* * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock * and do not drop the Preamble. */ - fec->eth->mii_speed = (((gd->ips_clk / 1000000) / 5) + 1) << 1; + out_be32(&fec->eth->mii_speed, + (((gd->ips_clk / 1000000) / 5) + 1) << 1); /* * Reset PHY, then delay 300ns @@ -414,27 +420,28 @@ static void mpc512x_fec_halt (struct eth_device *dev) /* * mask FEC chip interrupts */ - fec->eth->imask = 0; + out_be32(&fec->eth->imask, 0); /* * issue graceful stop command to the FEC transmitter if necessary */ - fec->eth->x_cntrl |= 0x00000001; + setbits_be32(&fec->eth->x_cntrl, 0x00000001); /* * wait for graceful stop to register */ - while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ; + while ((counter--) && (!(in_be32(&fec->eth->ievent) & 0x10000000))) + ; /* * Disable the Ethernet Controller */ - fec->eth->ecntrl &= 0xfffffffd; + clrbits_be32(&fec->eth->ecntrl, 0x00000002); /* * Issue a reset command to the FEC chip */ - fec->eth->ecntrl |= 0x1; + setbits_be32(&fec->eth->ecntrl, 0x1); /* * wait at least 16 clock cycles @@ -493,7 +500,7 @@ static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data, fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; /* Activate transmit Buffer Descriptor polling */ - fec->eth->x_des_active = 0x01000000; /* Descriptor polling active */ + out_be32(&fec->eth->x_des_active, 0x01000000); #if (DEBUG & 0x8) printf ( "+" ); @@ -536,8 +543,8 @@ static int mpc512x_fec_recv (struct eth_device *dev) /* * Check if any critical events have happened */ - ievent = fec->eth->ievent; - fec->eth->ievent = ievent; + ievent = in_be32(&fec->eth->ievent); + out_be32(&fec->eth->ievent, ievent); if (ievent & 0x20060000) { /* BABT, Rx/Tx FIFO errors */ mpc512x_fec_halt (dev); @@ -546,13 +553,13 @@ static int mpc512x_fec_recv (struct eth_device *dev) } if (ievent & 0x80000000) { /* Heartbeat error */ - fec->eth->x_cntrl |= 0x00000001; + setbits_be32(&fec->eth->x_cntrl, 0x00000001); } if (ievent & 0x10000000) { /* Graceful stop complete */ - if (fec->eth->x_cntrl & 0x00000001) { + if (in_be32(&fec->eth->x_cntrl) & 0x00000001) { mpc512x_fec_halt (dev); - fec->eth->x_cntrl &= ~0x00000001; + clrbits_be32(&fec->eth->x_cntrl, 0x00000001);; mpc512x_fec_init (dev, NULL); } } @@ -598,7 +605,8 @@ static int mpc512x_fec_recv (struct eth_device *dev) } /* Try to fill Buffer Descriptors */ - fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */ + out_be32(&fec->eth->r_des_active, 0x01000000); + return frame_length; } @@ -651,12 +659,12 @@ int mpc512x_fec_initialize (bd_t * bis) /* * Set interrupt mask register */ - fec->eth->imask = 0x00000000; + out_be32(&fec->eth->imask, 0x00000000); /* * Clear FEC-Lite interrupt event register(IEVENT) */ - fec->eth->ievent = 0xffffffff; + out_be32(&fec->eth->ievent, 0xffffffff); /* * Try to set the mac address now. The fec mac address is @@ -671,8 +679,8 @@ int mpc512x_fec_initialize (bd_t * bis) tmp = (*end) ? end+1 : end; } mpc512x_fec_set_hwaddr (fec, env_enetaddr); - fec->eth->gaddr1 = 0x00000000; - fec->eth->gaddr2 = 0x00000000; + out_be32(&fec->eth->gaddr1, 0x00000000); + out_be32(&fec->eth->gaddr2, 0x00000000); } mpc512x_fec_init_phy (dev, bis); @@ -696,12 +704,16 @@ int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * r reg = regAddr << FEC_MII_DATA_RA_SHIFT; phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); + out_be32(ð->mii_data, FEC_MII_DATA_ST | + FEC_MII_DATA_OP_RD | + FEC_MII_DATA_TA | + phy | reg); /* * wait for the related interrupt */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; + while ((timeout--) && (!(in_be32(ð->ievent) & 0x00800000))) + ; if (timeout == 0) { #if (DEBUG & 0x2) @@ -713,12 +725,12 @@ int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * r /* * clear mii interrupt bit */ - eth->ievent = 0x00800000; + out_be32(ð->ievent, 0x00800000); /* * it's now safe to read the PHY's register */ - *retVal = (uint16) eth->mii_data; + *retVal = (uint16) in_be32(ð->mii_data); return 0; } @@ -734,13 +746,16 @@ int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 da reg = regAddr << FEC_MII_DATA_RA_SHIFT; phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | - FEC_MII_DATA_TA | phy | reg | data); + out_be32(ð->mii_data, FEC_MII_DATA_ST | + FEC_MII_DATA_OP_WR | + FEC_MII_DATA_TA | + phy | reg | data); /* * wait for the MII interrupt */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; + while ((timeout--) && (!(in_be32(ð->ievent) & 0x00800000))) + ; if (timeout == 0) { #if (DEBUG & 0x2) @@ -752,7 +767,7 @@ int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 da /* * clear MII interrupt bit */ - eth->ievent = 0x00800000; + out_be32(ð->ievent, 0x00800000); return 0; }