ppc4xx: Bring 4xx fdt support up-to-date

This patch update the 4xx fdt support. It enabled fdt booting
on the AMCC Kilauea and Sequoia for now. More can follow later
quite easily.

Signed-off-by: Stefan Roese <sr@denx.de>
master
Stefan Roese 17 years ago
parent a449c500b1
commit 8697e6a19b
  1. 1
      board/amcc/kilauea/kilauea.c
  2. 25
      board/amcc/sequoia/sequoia.c
  3. 114
      cpu/ppc4xx/fdt.c
  4. 3
      include/configs/kilauea.h
  5. 6
      include/configs/sequoia.h

@ -25,6 +25,7 @@
#include <ppc4xx.h>
#include <ppc405.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/processor.h>
#include <asm/io.h>

@ -23,9 +23,11 @@
*/
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <ppc440.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <ppc440.h>
DECLARE_GLOBAL_DATA_PTR;
@ -583,3 +585,24 @@ int post_hotkeys_pressed(void)
return 0; /* No hotkeys supported */
}
#endif /* CONFIG_POST */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
u32 val[4];
int rc;
ft_cpu_setup(blob, bd);
/* Fixup NOR mapping */
val[0] = 0; /* chip select number */
val[1] = 0; /* always 0 */
val[2] = gd->bd->bi_flashstart;
val[3] = gd->bd->bi_flashsize;
rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
val, sizeof(val), 1);
if (rc)
printf("Unable to update property NOR mapping, err=%s\n",
fdt_strerror(rc));
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

@ -35,25 +35,18 @@
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#include <libfdt_env.h>
#include <fdt_support.h>
DECLARE_GLOBAL_DATA_PTR;
static void do_fixup(void *fdt, const char *node, const char *prop,
const void *val, int len, int create)
{
#if defined(DEBUG)
int i;
debug("Updating property '%s/%s' = ", node, prop);
for (i = 0; i < len; i++)
debug(" %.2x", *(u8*)(val+i));
debug("(%d)\n", *(u32 *)val);
#endif
int rc = fdt_find_and_setprop(fdt, node, prop, val, len, create);
if (rc)
printf("Unable to update property %s:%s, err=%s\n",
node, prop, fdt_strerror(rc));
}
/*
* The aliases needed for this generic etherne MAC address
* fixup function are not in place yet. So don't use this
* approach for now. This will be enabled later.
*/
#undef USES_FDT_ALIASES
#ifndef USES_FDT_ALIASES
static void do_fixup_macaddr(void *fdt, int offset, const void *val, int i)
{
int rc;
@ -69,87 +62,47 @@ static void do_fixup_macaddr(void *fdt, int offset, const void *val, int i)
printf("Unable to update property %s, err=%s\n",
"local-mac-address", fdt_strerror(rc));
}
static void do_fixup_u32(void *fdt, const char *node, const char *prop,
u32 val, int create)
{
val = cpu_to_fdt32(val);
do_fixup(fdt, node, prop, &val, sizeof(val), create);
}
static void do_fixup_uart(void *fdt, int offset, int i, bd_t *bd)
{
int rc;
u32 val;
PPC4xx_SYS_INFO sys_info;
get_sys_info(&sys_info);
debug("Updating node UART%d: clock-frequency=%d\n", i, gd->uart_clk);
val = cpu_to_fdt32(gd->uart_clk);
rc = fdt_setprop(fdt, offset, "clock-frequency", &val, 4);
if (rc)
printf("Unable to update node UART, err=%s\n", fdt_strerror(rc));
val = cpu_to_fdt32(bd->bi_baudrate);
rc = fdt_setprop(fdt, offset, "current-speed", &val, 4);
if (rc)
printf("Unable to update node UART, err=%s\n", fdt_strerror(rc));
}
#endif /* USES_FDT_ALIASES */
void ft_cpu_setup(void *blob, bd_t *bd)
{
char * cpu_path = "/cpus/" OF_CPU;
char *cpu_path = "/cpus/" OF_CPU;
sys_info_t sys_info;
int offset;
int i;
int tmp[2];
get_sys_info (&sys_info);
get_sys_info(&sys_info);
do_fixup_u32(blob, cpu_path, "timebase-frequency", bd->bi_intfreq, 1);
do_fixup_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
do_fixup_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
do_fixup_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
do_fixup_u32(blob, "/plb/opb/ebc", "clock-frequency", sys_info.freqEBC, 1);
/* update, or add and update /memory node */
offset = fdt_find_node_by_path(blob, "/memory");
if (offset < 0) {
offset = fdt_add_subnode(blob, 0, "memory");
if (offset < 0)
debug("failed to add /memory node: %s\n",
fdt_strerror(offset));
}
if (offset >= 0) {
fdt_setprop(blob, offset, "device_type",
"memory", sizeof("memory"));
tmp[0] = cpu_to_fdt32(bd->bi_memstart);
tmp[1] = cpu_to_fdt32(bd->bi_memsize);
fdt_setprop(blob, offset, "reg", tmp, sizeof(tmp));
debug("Updating /memory node to %d:%d\n",
bd->bi_memstart, bd->bi_memsize);
}
do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", bd->bi_intfreq, 1);
do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
sys_info.freqEBC, 1);
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
/*
* Setup all baudrates for the UARTs
*/
offset = 0;
for (i = 0; i < 4; i++) {
offset = fdt_find_node_by_type(blob, offset, "serial");
if (offset < 0)
break;
do_fixup_uart(blob, offset, i, bd);
}
do_fixup_by_compat_u32(blob, "ns16550", "clock-frequency", gd->uart_clk, 1);
#ifdef USES_FDT_ALIASES
/*
* Setup all MAC addresses in fdt
* The aliases needed for this generic etherne MAC address
* fixup function are not in place yet. So don't use this
* approach for now. This will be enabled later.
*/
offset = 0;
fdt_fixup_ethernet(blob, bd);
#else
offset = -1;
for (i = 0; i < 4; i++) {
offset = fdt_find_node_by_type(blob, offset, "network");
/*
* FIXME: This will cause problems with emac3 compatible
* devices, like on 405GP. But hopefully when we deal
* with those devices, the aliases stuff will be in
* place.
*/
offset = fdt_node_offset_by_compatible(blob, offset, "ibm,emac4");
if (offset < 0)
break;
@ -174,5 +127,6 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#endif
}
}
#endif /* USES_FDT_ALIASES */
}
#endif /* CONFIG_OF_LIBFDT */

@ -519,7 +519,6 @@
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define OF_CPU "PowerPC,405EX@0"
#define OF_CPU "cpu@0"
#endif /* __CONFIG_H */

@ -487,4 +487,10 @@
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define OF_CPU "cpu@0"
#endif /* __CONFIG_H */

Loading…
Cancel
Save