omap3: pandora: Enable DM_SERIAL

This patch enables DM_SERIAL for the pandora board. Verified that
the default kernel can still be booted with this.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>

board/pandora/pandora.c

@@ -13,6 +13,8 @@
  * Texas Instruments, <www.ti.com>
  */
 #include <common.h>
+#include <dm.h>
+#include <ns16550.h>
 #include <twl4030.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
@@ -33,6 +35,18 @@ DECLARE_GLOBAL_DATA_PTR;
 #define GPIO_IO_PWRDNZ			(1 << 6)
 #define PBIASLITEVMODE1			(1 << 8)
 
+static const struct ns16550_platdata pandora_serial = {
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK,
+	.fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DEVICE(pandora_uart) = {
+	"ns16550_serial",
+	&pandora_serial
+};
+
 /*
  * Routine: board_init
  * Description: Early hardware init.

configs/omap3_pandora_defconfig

@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SYS_TEXT_BASE=0x80008000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_OMAP3_PANDORA=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_NR_DRAM_BANKS=2
@@ -25,11 +26,12 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs)"
 CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_DM=y
 CONFIG_TWL4030_LED=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_CONS_INDEX=3
+CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_OMAP3_SPI=y

include/configs/omap3_pandora.h

@@ -20,23 +20,6 @@
 #define CONFIG_SYS_DEVICE_NULLDEV	1
 
 /*
- * Hardware drivers
- */
-
-/* TWL4030 LED */
-
-/*
- * NS16550 Configuration
- */
-#undef CONFIG_SYS_NS16550_CLK
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-
-/* commands to include */
-
-/*
  * Board NAND Info.
  */
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_SW