Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Blackfin: implement real write support for OTP

Browse Source 
Now that real documentation has been released for the OTP interface and
the on-chip ROM wrt writing/timings, implement support for reading/writing
as well as dumping/locking.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
master
Mike Frysinger 17 years ago
parent 9372c32148
commit 8b35e3aeff
1 changed files with 115 additions and 42 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 157
      common/cmd_otp.c

157
common/cmd_otp.c
Unescape View File

@ -6,7 +6,7 @@
* Licensed under the GPL-2 or later.
*/
/* There are 512 128-bit "pages" (0x000 to 0x1FF).
/* There are 512 128-bit "pages" (0x000 through 0x1FF).
* The pages are accessable as 64-bit "halfpages" (an upper and lower half).
* The pages are not part of the memory map. There is an OTP controller which
* handles scanning in/out of bits. While access is done through OTP MMRs,
@ -17,8 +17,6 @@
#include <common.h>
#include <command.h>
#ifdef CONFIG_CMD_OTP
#include <asm/blackfin.h>
#include <asm/mach-common/bits/otp.h>
@ -40,30 +38,87 @@ static const char *otp_strerror(uint32_t err)
#define lowup(x) ((x) % 2 ? "upper" : "lower")
int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
static int check_voltage(void)
{
/* Make sure voltage limits are within datasheet spec */
uint16_t vr_ctl = bfin_read_VR_CTL();
#ifdef __ADSPBF54x__
/* 0.9V <= VDDINT <= 1.1V */
if ((vr_ctl & 0xc) && (vr_ctl & 0xc0) == 0xc0)
return 1;
#else
/* for the parts w/out qualification yet */
(void)vr_ctl;
#endif
return 0;
}
static void set_otp_timing(bool write)
{
bool force = false;
if (!strcmp(argv[1], "--force")) {
force = true;
argv[1] = argv[0];
argv++;
--argc;
static uint32_t timing;
if (!timing) {
uint32_t tp1, tp2, tp3;
/* OTP_TP1 = 1000 / sclk_period (in nanoseconds)
* OTP_TP1 = 1000 / (1 / get_sclk() * 10^9)
* OTP_TP1 = (1000 * get_sclk()) / 10^9
* OTP_TP1 = get_sclk() / 10^6
*/
tp1 = get_sclk() / 1000000;
/* OTP_TP2 = 400 / (2 * sclk_period)
* OTP_TP2 = 400 / (2 * 1 / get_sclk() * 10^9)
* OTP_TP2 = (400 * get_sclk()) / (2 * 10^9)
* OTP_TP2 = (2 * get_sclk()) / 10^7
*/
tp2 = (2 * get_sclk() / 10000000) << 8;
/* OTP_TP3 = magic constant */
tp3 = (0x1401) << 15;
timing = tp1 | tp2 | tp3;
}
bfrom_OtpCommand(OTP_INIT, write ? timing : timing & ~(-1 << 15));
}
int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
uint32_t ret, base_flags;
bool prompt_user, force_read;
uint32_t (*otp_func)(uint32_t page, uint32_t flags, uint64_t *page_content);
if (!strcmp(argv[1], "read"))
otp_func = otp_read;
else if (!strcmp(argv[1], "write"))
otp_func = otp_write;
else {
if (argc < 4) {
usage:
cmd_usage(cmdtp);
return 1;
}
prompt_user = false;
base_flags = 0;
if (!strcmp(argv[1], "read"))
otp_func = bfrom_OtpRead;
else if (!strcmp(argv[1], "dump")) {
otp_func = bfrom_OtpRead;
force_read = true;
} else if (!strcmp(argv[1], "write")) {
otp_func = bfrom_OtpWrite;
base_flags = OTP_CHECK_FOR_PREV_WRITE;
if (!strcmp(argv[2], "--force")) {
argv[2] = argv[1];
argv++;
--argc;
} else
prompt_user = false;
} else if (!strcmp(argv[1], "lock")) {
if (argc != 4)
goto usage;
otp_func = bfrom_OtpWrite;
base_flags = OTP_LOCK;
} else
goto usage;
uint64_t *addr = (uint64_t *)simple_strtoul(argv[2], NULL, 16);
uint32_t page = simple_strtoul(argv[3], NULL, 16);
uint32_t flags, ret;
uint32_t flags;
size_t i, count;
ulong half;
@ -81,8 +136,15 @@ int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} else
half = 0;
/* "otp lock" has slightly different semantics */
if (base_flags & OTP_LOCK) {
count = page;
page = (uint32_t)addr;
addr = NULL;
}
/* do to the nature of OTP, make sure users are sure */
if (!force && otp_func == otp_write) {
if (prompt_user) {
printf(
"Writing one time programmable memory\n"
"Make sure your operating voltages and temperature are within spec\n"
@ -111,30 +173,42 @@ int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
}
}
/* Only supported in newer silicon ... enable writing */
#if (0)
otp_command(OTP_INIT, ...);
#else
*pOTP_TIMING = 0x32149485;
#endif
}
printf("OTP memory %s: addr 0x%08lx page 0x%03X count %ld ... ",
argv[1], addr, page, count);
set_otp_timing(otp_func == bfrom_OtpWrite);
if (otp_func == bfrom_OtpWrite && check_voltage()) {
puts("ERROR: VDDINT voltage is out of spec for writing\n");
return -1;
}
/* Do the actual reading/writing stuff */
ret = 0;
for (i = half; i < count + half; ++i) {
flags = (i % 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF;
flags = base_flags | (i % 2 ? OTP_UPPER_HALF : OTP_LOWER_HALF);
try_again:
ret = otp_func(page, flags, addr);
if (ret & 0x1)
break;
else if (ret)
if (ret & OTP_MASTER_ERROR) {
if (force_read) {
if (flags & OTP_NO_ECC)
break;
else
flags |= OTP_NO_ECC;
puts("E");
goto try_again;
} else
break;
} else if (ret)
puts("W");
else
puts(".");
++addr;
if (i % 2)
if (!(base_flags & OTP_LOCK)) {
++addr;
if (i % 2)
++page;
} else
++page;
}
if (ret & 0x1)
@ -143,21 +217,20 @@ int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
puts(" done\n");
if (otp_func == otp_write)
/* Only supported in newer silicon ... disable writing */
#if (0)
otp_command(OTP_INIT, ...);
#else
*pOTP_TIMING = 0x1485;
#endif
/* Make sure we disable writing */
set_otp_timing(false);
bfrom_OtpCommand(OTP_CLOSE, 0);
return ret;
}
U_BOOT_CMD(otp, 6, 0, do_otp,
"One-Time-Programmable sub-system",
U_BOOT_CMD(otp, 7, 0, do_otp,
"One-Time-Programmable sub-system\n",
"read <addr> <page> [count] [half]\n"
" - read 'count' half-pages starting at 'page' (offset 'half') to 'addr'\n"
"otp dump <addr> <page> [count] [half]\n"
" - like 'otp read', but skip read errors\n"
"otp write [--force] <addr> <page> [count] [half]\n"
" - read/write 'count' half-pages starting at page 'page' (offset 'half')\n");
#endif
" - write 'count' half-pages starting at 'page' (offset 'half') from 'addr'\n"
"otp lock <page> <count>\n"
" - lock 'count' pages starting at 'page'\n");

Write Preview
Loading…
Cancel
Save