Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

net: tsec: Adjust orders to avoid forward declaration of tsec_send()

Browse Source 
Adjust static functions in a proper order so that forward declaration
of tsec_send() can be avoided.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
master
Bin Meng 9 years ago committed by Joe Hershberger
parent e677da9723
commit 8ba50176fc
1 changed files with 103 additions and 105 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 208
      drivers/net/tsec.c

208
drivers/net/tsec.c
Unescape View File

@ -21,8 +21,6 @@
DECLARE_GLOBAL_DATA_PTR;
static int tsec_send(struct eth_device *dev, void *packet, int length);
/* Default initializations for TSEC controllers. */
static struct tsec_info_struct tsec_info[] = {
@ -221,6 +219,109 @@ static void adjust_link(struct tsec_private *priv, struct phy_device *phydev)
(phydev->port == PORT_FIBRE) ? ", fiber mode" : "");
}
/*
* This returns the status bits of the device. The return value
* is never checked, and this is what the 8260 driver did, so we
* do the same. Presumably, this would be zero if there were no
* errors
*/
static int tsec_send(struct eth_device *dev, void *packet, int length)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
uint16_t status;
int result = 0;
int i;
/* Find an empty buffer descriptor */
for (i = 0;
in_be16(&priv->txbd[priv->tx_idx].status) & TXBD_READY;
i++) {
if (i >= TOUT_LOOP) {
debug("%s: tsec: tx buffers full\n", dev->name);
return result;
}
}
out_be32(&priv->txbd[priv->tx_idx].bufptr, (u32)packet);
out_be16(&priv->txbd[priv->tx_idx].length, length);
status = in_be16(&priv->txbd[priv->tx_idx].status);
out_be16(&priv->txbd[priv->tx_idx].status, status |
(TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT));
/* Tell the DMA to go */
out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
/* Wait for buffer to be transmitted */
for (i = 0;
in_be16(&priv->txbd[priv->tx_idx].status) & TXBD_READY;
i++) {
if (i >= TOUT_LOOP) {
debug("%s: tsec: tx error\n", dev->name);
return result;
}
}
priv->tx_idx = (priv->tx_idx + 1) % TX_BUF_CNT;
result = in_be16(&priv->txbd[priv->tx_idx].status) & TXBD_STATS;
return result;
}
static int tsec_recv(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
while (!(in_be16(&priv->rxbd[priv->rx_idx].status) & RXBD_EMPTY)) {
int length = in_be16(&priv->rxbd[priv->rx_idx].length);
uint16_t status = in_be16(&priv->rxbd[priv->rx_idx].status);
uchar *packet = net_rx_packets[priv->rx_idx];
/* Send the packet up if there were no errors */
if (!(status & RXBD_STATS))
net_process_received_packet(packet, length - 4);
else
printf("Got error %x\n", (status & RXBD_STATS));
out_be16(&priv->rxbd[priv->rx_idx].length, 0);
status = RXBD_EMPTY;
/* Set the wrap bit if this is the last element in the list */
if ((priv->rx_idx + 1) == PKTBUFSRX)
status |= RXBD_WRAP;
out_be16(&priv->rxbd[priv->rx_idx].status, status);
priv->rx_idx = (priv->rx_idx + 1) % PKTBUFSRX;
}
if (in_be32(&regs->ievent) & IEVENT_BSY) {
out_be32(&regs->ievent, IEVENT_BSY);
out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
}
return -1;
}
/* Stop the interface */
static void tsec_halt(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
setbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
while ((in_be32(&regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC))
!= (IEVENT_GRSC | IEVENT_GTSC))
;
clrbits_be32(&regs->maccfg1, MACCFG1_TX_EN | MACCFG1_RX_EN);
/* Shut down the PHY, as needed */
phy_shutdown(priv->phydev);
}
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
/*
* When MACCFG1[Rx_EN] is enabled during system boot as part
@ -363,109 +464,6 @@ static void startup_tsec(struct eth_device *dev)
}
/*
* This returns the status bits of the device. The return value
* is never checked, and this is what the 8260 driver did, so we
* do the same. Presumably, this would be zero if there were no
* errors
*/
static int tsec_send(struct eth_device *dev, void *packet, int length)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
uint16_t status;
int result = 0;
int i;
/* Find an empty buffer descriptor */
for (i = 0;
in_be16(&priv->txbd[priv->tx_idx].status) & TXBD_READY;
i++) {
if (i >= TOUT_LOOP) {
debug("%s: tsec: tx buffers full\n", dev->name);
return result;
}
}
out_be32(&priv->txbd[priv->tx_idx].bufptr, (u32)packet);
out_be16(&priv->txbd[priv->tx_idx].length, length);
status = in_be16(&priv->txbd[priv->tx_idx].status);
out_be16(&priv->txbd[priv->tx_idx].status, status |
(TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT));
/* Tell the DMA to go */
out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
/* Wait for buffer to be transmitted */
for (i = 0;
in_be16(&priv->txbd[priv->tx_idx].status) & TXBD_READY;
i++) {
if (i >= TOUT_LOOP) {
debug("%s: tsec: tx error\n", dev->name);
return result;
}
}
priv->tx_idx = (priv->tx_idx + 1) % TX_BUF_CNT;
result = in_be16(&priv->txbd[priv->tx_idx].status) & TXBD_STATS;
return result;
}
static int tsec_recv(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
while (!(in_be16(&priv->rxbd[priv->rx_idx].status) & RXBD_EMPTY)) {
int length = in_be16(&priv->rxbd[priv->rx_idx].length);
uint16_t status = in_be16(&priv->rxbd[priv->rx_idx].status);
uchar *packet = net_rx_packets[priv->rx_idx];
/* Send the packet up if there were no errors */
if (!(status & RXBD_STATS))
net_process_received_packet(packet, length - 4);
else
printf("Got error %x\n", (status & RXBD_STATS));
out_be16(&priv->rxbd[priv->rx_idx].length, 0);
status = RXBD_EMPTY;
/* Set the wrap bit if this is the last element in the list */
if ((priv->rx_idx + 1) == PKTBUFSRX)
status |= RXBD_WRAP;
out_be16(&priv->rxbd[priv->rx_idx].status, status);
priv->rx_idx = (priv->rx_idx + 1) % PKTBUFSRX;
}
if (in_be32(&regs->ievent) & IEVENT_BSY) {
out_be32(&regs->ievent, IEVENT_BSY);
out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
}
return -1;
}
/* Stop the interface */
static void tsec_halt(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
setbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
while ((in_be32(&regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC))
!= (IEVENT_GRSC | IEVENT_GTSC))
;
clrbits_be32(&regs->maccfg1, MACCFG1_TX_EN | MACCFG1_RX_EN);
/* Shut down the PHY, as needed */
phy_shutdown(priv->phydev);
}
/*
* Initializes data structures and registers for the controller,
* and brings the interface up. Returns the link status, meaning
* that it returns success if the link is up, failure otherwise.

Write Preview
Loading…
Cancel
Save