Separate omap24xx specific code from arm1136

Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
master
Sascha Hauer 16 years ago committed by Peter Pearse
parent 8c16cb0d3b
commit 8bf69d8178
  1. 4
      Makefile
  2. 2
      cpu/arm1136/Makefile
  3. 11
      cpu/arm1136/cpu.c
  4. 46
      cpu/arm1136/omap24xx/Makefile
  5. 109
      cpu/arm1136/omap24xx/interrupts.c
  6. 42
      cpu/arm1136/omap24xx/start.S
  7. 21
      cpu/arm1136/start.S
  8. 0
      include/asm-arm/arch-omap24xx/bits.h
  9. 0
      include/asm-arm/arch-omap24xx/clocks.h
  10. 0
      include/asm-arm/arch-omap24xx/i2c.h
  11. 0
      include/asm-arm/arch-omap24xx/mem.h
  12. 0
      include/asm-arm/arch-omap24xx/mux.h
  13. 0
      include/asm-arm/arch-omap24xx/omap2420.h
  14. 0
      include/asm-arm/arch-omap24xx/sizes.h
  15. 0
      include/asm-arm/arch-omap24xx/sys_info.h
  16. 0
      include/asm-arm/arch-omap24xx/sys_proto.h

@ -2590,12 +2590,12 @@ zylonite_config :
## ARM1136 Systems
#########################################################################
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
apollon_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) $(@:_config=) arm arm1136 apollon
@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
#========================================================================

@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o
COBJS = interrupts.o cpu.o
COBJS = cpu.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))

@ -33,9 +33,6 @@
#include <common.h>
#include <command.h>
#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
#include <asm/arch/omap2420.h>
#endif
#ifdef CONFIG_USE_IRQ
DECLARE_GLOBAL_DATA_PTR;
@ -47,10 +44,10 @@ static unsigned long read_p15_c1 (void)
unsigned long value;
__asm__ __volatile__(
"mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
: "=r" (value)
:
: "memory");
"mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
: "=r" (value)
:
: "memory");
return value;
}

@ -0,0 +1,46 @@
#
# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
COBJS = interrupts.o
SOBJS = start.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

@ -32,31 +32,28 @@
#include <common.h>
#include <asm/arch/bits.h>
#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
# include <asm/arch/omap2420.h>
#endif
#include <asm/arch/omap2420.h>
#define TIMER_LOAD_VAL 0
/* macro to read the 32 bit timer */
#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+TCRR))
#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
/* Use the IntegratorCP function from board/integratorcp.c */
#else
#define READ_TIMER (*volatile ulong*(CFG_TIMERBASE+TCRR))
static ulong timestamp;
static ulong lastinc;
/* nothing really to do with interrupts, just starts up a counter. */
int interrupt_init (void)
/*
* nothing really to do with interrupts, just starts up a counter.
*/
int interrupt_init(void)
{
int32_t val;
/* Start the counter ticking up */
*((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/
val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/
/* reload value on overflow*/
*((int32_t *) (CFG_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;
/* mask to enable timer*/
val = (CFG_PVT << 2) | BIT5 | BIT1 | BIT0;
*((int32_t *) (CFG_TIMERBASE + TCLR)) = val; /* start timer */
reset_timer_masked(); /* init the timestamp and lastinc value */
@ -66,82 +63,99 @@ int interrupt_init (void)
/*
* timer without interrupts
*/
void reset_timer (void)
void reset_timer(void)
{
reset_timer_masked ();
reset_timer_masked();
}
ulong get_timer (ulong base)
ulong get_timer(ulong base)
{
return get_timer_masked () - base;
return get_timer_masked() - base;
}
void set_timer (ulong t)
void set_timer(ulong t)
{
timestamp = t;
}
/* delay x useconds AND perserve advance timstamp value */
void udelay (unsigned long usec)
void udelay(unsigned long usec)
{
ulong tmo, tmp;
if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
tmo /= 1000; /* finish normalize. */
} else { /* else small number, don't kill it prior to HZ multiply */
/* if "big" number, spread normalization to seconds */
if (usec >= 1000) {
/* start to normalize for usec to ticks per sec */
tmo = usec / 1000;
/* find number of "ticks" to wait to achieve target */
tmo *= CFG_HZ;
/* finish normalize. */
tmo /= 1000;
} else {
/* else small number, don't kill it prior to HZ multiply */
tmo = usec * CFG_HZ;
tmo /= (1000*1000);
}
tmp = get_timer (0); /* get current timestamp */
if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */
/* get current timestamp */
tmp = get_timer(0);
if ((tmo + tmp + 1) < tmp)
/* setting this forward will roll time stamp */
/* reset "advancing" timestamp to 0, set lastinc value */
reset_timer_masked();
else
tmo += tmp; /* else, set advancing stamp wake up time */
while (get_timer_masked () < tmo)/* loop till event */
/* else, set advancing stamp wake up time */
tmo += tmp;
while (get_timer_masked() < tmo)/* loop till event */
/*NOP*/;
}
void reset_timer_masked (void)
void reset_timer_masked(void)
{
/* reset time */
lastinc = READ_TIMER; /* capture current incrementer value time */
timestamp = 0; /* start "advancing" time stamp from 0 */
/* capture current incrementer value time */
lastinc = READ_TIMER;
/* start "advancing" time stamp from 0 */
timestamp = 0;
}
ulong get_timer_masked (void)
ulong get_timer_masked(void)
{
ulong now = READ_TIMER; /* current tick value */
ulong now = READ_TIMER; /* current tick value */
if (now >= lastinc) /* normal mode (non roll) */
timestamp += (now - lastinc); /* move stamp fordward with absoulte diff ticks */
else /* we have rollover of incrementer */
/* normal mode (non roll) */
if (now >= lastinc)
/* move stamp forward with absolute diff ticks */
timestamp += (now - lastinc);
else
/* we have rollover of incrementer */
timestamp += (0xFFFFFFFF - lastinc) + now;
lastinc = now;
return timestamp;
}
/* waits specified delay value and resets timestamp */
void udelay_masked (unsigned long usec)
void udelay_masked(unsigned long usec)
{
ulong tmo;
ulong endtime;
signed long diff;
if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */
tmo /= 1000; /* finish normalize. */
} else { /* else small number, don't kill it prior to HZ multiply */
if (usec >= 1000) {
/* "big" number, spread normalization to seconds */
/* start to normalize for usec to ticks per sec */
tmo = usec / 1000;
/* find number of "ticks" to wait to achieve target */
tmo *= CFG_HZ;
tmo /= 1000;/* finish normalize. */
} else {
/* else small number, don't kill it prior to HZ multiply */
tmo = usec * CFG_HZ;
tmo /= (1000*1000);
}
endtime = get_timer_masked () + tmo;
endtime = get_timer_masked() + tmo;
do {
ulong now = get_timer_masked ();
ulong now = get_timer_masked();
diff = endtime - now;
} while (diff >= 0);
}
@ -158,10 +172,9 @@ unsigned long long get_ticks(void)
* This function is derived from PowerPC code (timebase clock frequency).
* On ARM it returns the number of timer ticks per second.
*/
ulong get_tbclk (void)
ulong get_tbclk(void)
{
ulong tbclk;
tbclk = CFG_HZ;
return tbclk;
}
#endif /* !Integrator/CP */

@ -0,0 +1,42 @@
/*
* armboot - Startup Code for OMP2420/ARM1136 CPU-core
*
* Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com>
*
* Copyright (c) 2001 Marius Gr??ger <mag@sysgo.de>
* Copyright (c) 2002 Alex Z??pke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <asm/arch/omap2420.h>
.globl reset_cpu
reset_cpu:
ldr r1, rstctl /* get addr for global reset reg */
mov r3, #0x2 /* full reset pll+mpu */
str r3, [r1] /* force reset */
mov r0, r0
_loop_forever:
b _loop_forever
rstctl:
.word PM_RSTCTRL_WKUP

@ -30,9 +30,6 @@
#include <config.h>
#include <version.h>
#if !defined(CONFIG_INTEGRATOR) && ! defined(CONFIG_ARCH_CINTEGRATOR)
#include <asm/arch/omap2420.h>
#endif
.globl _start
_start: b reset
#ifdef CONFIG_ONENAND_IPL
@ -438,22 +435,4 @@ fiq:
arm1136_cache_flush:
mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
mov pc, lr @ back to caller
#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
/* Use the IntegratorCP function from board/integratorcp/platform.S */
#else
.align 5
.globl reset_cpu
reset_cpu:
ldr r1, rstctl /* get addr for global reset reg */
mov r3, #0x2 /* full reset pll+mpu */
str r3, [r1] /* force reset */
mov r0, r0
_loop_forever:
b _loop_forever
rstctl:
.word PM_RSTCTRL_WKUP
#endif
#endif /* CONFIG_ONENAND_IPL */

Loading…
Cancel
Save