ARM64: zynqmp: Read RAM information from DT

Read information about memory from DT. This patch simplify life with
synchronization between DT and board files.

dram_init() only needs maximum RAM size below 4GB that's why please sort
banks in memory node.
dram_init_banksize() copies memory setup to bi_dram[].
This will avoid reading information from DT twice.

Memory test start/end were changed to DDR location to let memtest still
compiled.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

board/xilinx/zynqmp/zynqmp.c

@@ -50,12 +50,133 @@ int board_early_init_r(void)
 	return 0;
 }
 
+#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
+/*
+ * fdt_get_reg - Fill buffer by information from DT
+ */
+static phys_size_t fdt_get_reg(const void *fdt, int nodeoffset, void *buf,
+			       const u32 *cell, int n)
+{
+	int i = 0, b, banks;
+	int parent_offset = fdt_parent_offset(fdt, nodeoffset);
+	int address_cells = fdt_address_cells(fdt, parent_offset);
+	int size_cells = fdt_size_cells(fdt, parent_offset);
+	char *p = buf;
+	phys_addr_t val;
+	phys_size_t vals;
+
+	debug("%s: addr_cells=%x, size_cell=%x, buf=%p, cell=%p\n",
+	      __func__, address_cells, size_cells, buf, cell);
+
+	/* Check memory bank setup */
+	banks = n % (address_cells + size_cells);
+	if (banks)
+		panic("Incorrect memory setup cells=%d, ac=%d, sc=%d\n",
+		      n, address_cells, size_cells);
+
+	banks = n / (address_cells + size_cells);
+
+	for (b = 0; b < banks; b++) {
+		debug("%s: Bank #%d:\n", __func__, b);
+		if (address_cells == 2) {
+			val = cell[i + 1];
+			val <<= 32;
+			val |= cell[i];
+			val = fdt64_to_cpu(val);
+			debug("%s: addr64=%llx, ptr=%p, cell=%p\n",
+			      __func__, val, p, &cell[i]);
+			*(phys_addr_t *)p = val;
+		} else {
+			debug("%s: addr32=%x, ptr=%p\n",
+			      __func__, fdt32_to_cpu(cell[i]), p);
+			*(phys_addr_t *)p = fdt32_to_cpu(cell[i]);
+		}
+		p += sizeof(phys_addr_t);
+		i += address_cells;
+
+		debug("%s: pa=%p, i=%x, size=%zu\n", __func__, p, i,
+		      sizeof(phys_addr_t));
+
+		if (size_cells == 2) {
+			vals = cell[i + 1];
+			vals <<= 32;
+			vals |= cell[i];
+			vals = fdt64_to_cpu(vals);
+
+			debug("%s: size64=%llx, ptr=%p, cell=%p\n",
+			      __func__, vals, p, &cell[i]);
+			*(phys_size_t *)p = vals;
+		} else {
+			debug("%s: size32=%x, ptr=%p\n",
+			      __func__, fdt32_to_cpu(cell[i]), p);
+			*(phys_size_t *)p = fdt32_to_cpu(cell[i]);
+		}
+		p += sizeof(phys_size_t);
+		i += size_cells;
+
+		debug("%s: ps=%p, i=%x, size=%zu\n",
+		      __func__, p, i, sizeof(phys_size_t));
+	}
+
+	/* Return the first address size */
+	return *(phys_size_t *)((char *)buf + sizeof(phys_addr_t));
+}
+
+#define FDT_REG_SIZE  sizeof(u32)
+/* Temp location for sharing data for storing */
+/* Up to 64-bit address + 64-bit size */
+static u8 tmp[CONFIG_NR_DRAM_BANKS * 16];
+
+void dram_init_banksize(void)
+{
+	int bank;
+
+	memcpy(&gd->bd->bi_dram[0], &tmp, sizeof(tmp));
+
+	for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+		debug("Bank #%d: start %llx\n", bank,
+		      (unsigned long long)gd->bd->bi_dram[bank].start);
+		debug("Bank #%d: size %llx\n", bank,
+		      (unsigned long long)gd->bd->bi_dram[bank].size);
+	}
+}
+
+int dram_init(void)
+{
+	int node, len;
+	const void *blob = gd->fdt_blob;
+	const u32 *cell;
+
+	memset(&tmp, 0, sizeof(tmp));
+
+	/* find or create "/memory" node. */
+	node = fdt_subnode_offset(blob, 0, "memory");
+	if (node < 0) {
+		printf("%s: Can't get memory node\n", __func__);
+		return node;
+	}
+
+	/* Get pointer to cells and lenght of it */
+	cell = fdt_getprop(blob, node, "reg", &len);
+	if (!cell) {
+		printf("%s: Can't get reg property\n", __func__);
+		return -1;
+	}
+
+	gd->ram_size = fdt_get_reg(blob, node, &tmp, cell, len / FDT_REG_SIZE);
+
+	debug("%s: Initial DRAM size %llx\n", __func__, gd->ram_size);
+
+	return 0;
+}
+#else
 int dram_init(void)
 {
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
 
 	return 0;
 }
+#endif
 
 void reset_cpu(ulong addr)
 {

include/configs/xilinx_zynqmp.h

@@ -26,8 +26,11 @@
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_SCRATCH	0xfffc0000
 
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_SDRAM_SIZE
+#ifndef CONFIG_NR_DRAM_BANKS
+# define CONFIG_NR_DRAM_BANKS		2
+#endif
+#define CONFIG_SYS_MEMTEST_START	0
+#define CONFIG_SYS_MEMTEST_END		1000
 
 /* Have release address at the end of 256MB for now */
 #define CPU_RELEASE_ADDR	0xFFFFFF0
@@ -39,7 +42,7 @@
 # define CONFIG_IDENT_STRING		" Xilinx ZynqMP"
 #endif
 
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
 
 /* Flat Device Tree Definitions */
 

include/configs/xilinx_zynqmp_ep.h

@@ -22,11 +22,6 @@
 #define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
 				 ZYNQMP_USB1_XHCI_BASEADDR}
 
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		0
-#define CONFIG_SYS_SDRAM_SIZE		0x40000000
-
 #define COUNTER_FREQUENCY	4000000
 
 #include <configs/xilinx_zynqmp.h>