MIPS: add BMIPS Sagem F@ST1704 board

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arch/mips/dts/Makefile

@@ -13,6 +13,7 @@ dtb-$(CONFIG_BOARD_COMTREND_CT5361) += comtrend,ct-5361.dtb
 dtb-$(CONFIG_BOARD_COMTREND_VR3032U) += comtrend,vr-3032u.dtb
 dtb-$(CONFIG_BOARD_HUAWEI_HG556A) += huawei,hg556a.dtb
 dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
+dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
 dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
 
 targets += $(dtb-y)

arch/mips/dts/sagem,f@st1704.dts

@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "brcm,bcm6338.dtsi"
+
+/ {
+	model = "Sagem F@ST1704";
+	compatible = "sagem,f@st1704", "brcm,bcm6338";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		inet_green {
+			label = "F@ST1704:green:inet";
+			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			label = "F@ST1704:green:power";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		inet_red {
+			label = "F@ST1704:red:inet";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};

arch/mips/mach-bmips/Kconfig

@@ -121,6 +121,17 @@ config BOARD_NETGEAR_CG3100D
 	  ethernet ports, 1 UART, GPIO buttons and LEDs, and a BCM43225
 	  (miniPCIe).
 
+config BOARD_SAGEM_FAST1704
+	bool "Sagem F@ST1704"
+	depends on SOC_BMIPS_BCM6338
+	select BMIPS_SUPPORTS_BOOT_RAM
+	help
+	  Sagem F@ST1704 boards have a BCM6338 SoC with 16 MB of RAM and 4 MB
+	  of flash (SPI).
+	  Between its different peripherals there's a BCM5325 switch with 4
+	  ethernet ports, 1 UART, GPIO buttons and LEDs, and a BCM4312
+	  (miniPCI).
+
 config BOARD_SFR_NB4_SER
 	bool "SFR NeufBox 4 (Sercomm)"
 	depends on SOC_BMIPS_BCM6358
@@ -149,6 +160,7 @@ source "board/comtrend/ct5361/Kconfig"
 source "board/comtrend/vr3032u/Kconfig"
 source "board/huawei/hg556a/Kconfig"
 source "board/netgear/cg3100d/Kconfig"
+source "board/sagem/f@st1704/Kconfig"
 source "board/sfr/nb4_ser/Kconfig"
 
 endmenu

board/sagem/f@st1704/Kconfig

@@ -0,0 +1,12 @@
+if BOARD_SAGEM_FAST1704
+
+config SYS_BOARD
+	default "f@st1704"
+
+config SYS_VENDOR
+	default "sagem"
+
+config SYS_CONFIG_NAME
+	default "sagem_f@st1704"
+
+endif

board/sagem/f@st1704/MAINTAINERS

@@ -0,0 +1,6 @@
+SAGEM F@ST1704 BOARD
+M:	Álvaro Fernández Rojas <noltari@gmail.com>
+S:	Maintained
+F:	board/sagem/f@st1704/
+F:	include/configs/sagem_f@st1704.h
+F:	configs/sagem_f@st1704_ram_defconfig

board/sagem/f@st1704/Makefile

@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += f@st1704.o

board/sagem/f@st1704/f@st1704.c

@@ -0,0 +1,7 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>

configs/sagem_f@st1704_ram_defconfig

@@ -0,0 +1,52 @@
+CONFIG_ARCH_BMIPS=y
+CONFIG_BAUDRATE=115200
+CONFIG_BCM6345_CLK=y
+CONFIG_BCM6345_GPIO=y
+CONFIG_BCM6345_SERIAL=y
+CONFIG_BMIPS_BOOT_RAM=y
+CONFIG_BOARD_SAGEM_FAST1704=y
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTM=y
+CONFIG_CMD_CPU=y
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_GPIO is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_LED=y
+CONFIG_CMD_LICENSE=y
+CONFIG_CMD_LOADB=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_MISC is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_DEFAULT_DEVICE_TREE="sagem,f@st1704"
+CONFIG_DISPLAY_CPUINFO=y
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_DM_GPIO=y
+CONFIG_DM_RESET=y
+CONFIG_DM_SERIAL=y
+CONFIG_HUSH_PARSER=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_RESET=y
+CONFIG_RESET_BCM6345=y
+CONFIG_SOC_BMIPS_BCM6338=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_NO_FLASH=y
+CONFIG_SYS_PROMPT="F@ST1704 # "
+CONFIG_SYS_TEXT_BASE=0x80010000

include/configs/sagem_f@st1704.h

@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <configs/bmips_common.h>
+#include <configs/bmips_bcm6338.h>
+
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE			(8 * 1024)
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP