Coding style cleanup; update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

board/digsy_mtc/cmd_mtc.c

@@ -333,18 +333,18 @@ int cmd_mtc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 
 U_BOOT_CMD(mtc, 5, 1, cmd_mtc,
-	   "mtc     - special commands for digsyMTC\n",
-	   "[subcommand] [args...]\n"
-	   "Subcommands list:\n"
-	   "led [ledname] [state] [blink] - set state of leds\n"
-	   "  [ledname]: diag can1 can2 can3 can4 usbpwr usbbusy user1 user2\n"
-	   "  [state]: off red green orange\n"
-	   "  [blink]: blink interval in 100ms steps (1 - 10; 0 = static)\n"
-	   "key - returns state of user key\n"
-	   "version - returns firmware version of supervisor uC\n"
-	   "appreg - reads appreg value and stores in environment variable"
-	   " 'appreg'\n"
-	   "digin [channel] - returns state of digital input (1 or 2)\n"
-	   "digout <on|off> <on|off> - sets state of two digital outputs\n"
-	   "help [subcommand] - get help for subcommand\n");
-
+	"mtc     - special commands for digsyMTC\n",
+	"[subcommand] [args...]\n"
+	"Subcommands list:\n"
+	"led [ledname] [state] [blink] - set state of leds\n"
+	"  [ledname]: diag can1 can2 can3 can4 usbpwr usbbusy user1 user2\n"
+	"  [state]: off red green orange\n"
+	"  [blink]: blink interval in 100ms steps (1 - 10; 0 = static)\n"
+	"key - returns state of user key\n"
+	"version - returns firmware version of supervisor uC\n"
+	"appreg - reads appreg value and stores in environment variable"
+	" 'appreg'\n"
+	"digin [channel] - returns state of digital input (1 or 2)\n"
+	"digout <on|off> <on|off> - sets state of two digital outputs\n"
+	"help [subcommand] - get help for subcommand\n"
+);

board/esd/dp405/dp405.c

@@ -101,28 +101,28 @@ int checkboard (void)
 	id1 = trans[(~(in_be32((void *)GPIO0_IR) >> 5)) & 0x0000000f];
 	id2 = trans[(~(in_be32((void *)GPIO0_IR) >> 9)) & 0x0000000f];
 
-        rev = in_8((void *)0xf0001000);
-        if (rev & 0x10) /* old DP405 compatibility */
-                rev = in_8((void *)0xf0000800);
-
-        switch (rev & 0xc0) {
-        case 0x00:
-                puts(" (HW=DP405");
-                break;
-        case 0x80:
-                puts(" (HW=DP405/CO");
-                break;
-        case 0xc0:
-                puts(" (HW=DN405");
-                break;
-        }
-        printf(", ID=0x%1X%1X, PLD=0x%02X", id2, id1, rev & 0x0f);
-
-        if ((rev & 0xc0) == 0xc0) {
-                printf(", C5V=%s",
-                       in_be32((void *)GPIO0_IR) & 0x40000000 ? "off" : "on");
-        }
-        puts(")\n");
+	rev = in_8((void *)0xf0001000);
+	if (rev & 0x10) /* old DP405 compatibility */
+		rev = in_8((void *)0xf0000800);
+
+	switch (rev & 0xc0) {
+	case 0x00:
+		puts(" (HW=DP405");
+		break;
+	case 0x80:
+		puts(" (HW=DP405/CO");
+		break;
+	case 0xc0:
+		puts(" (HW=DN405");
+		break;
+	}
+	printf(", ID=0x%1X%1X, PLD=0x%02X", id2, id1, rev & 0x0f);
+
+	if ((rev & 0xc0) == 0xc0) {
+		printf(", C5V=%s",
+		       in_be32((void *)GPIO0_IR) & 0x40000000 ? "off" : "on");
+	}
+	puts(")\n");
 
 	return 0;
 }

cpu/arm926ejs/mx27/generic.c

@@ -238,4 +238,3 @@ void imx_gpio_mode(int gpio_mode)
 				&regs->port[port].iconfb2);
 	}
 }
-

cpu/arm926ejs/mx27/timer.c

@@ -176,7 +176,7 @@ void set_timer (ulong t)
 	timestamp = time_to_tick(t);
 }
 
-/* delay x useconds AND perserve advance timstamp value */
+/* delay x useconds AND preserve advance timstamp value */
 void udelay (unsigned long usec)
 {
 	unsigned long long tmp;
@@ -188,4 +188,3 @@ void udelay (unsigned long usec)
 	while (get_ticks() < tmp)	/* loop till event */
 		 /*NOP*/;
 }
-

cpu/arm_cortexa8/cpu.c

@@ -78,4 +78,3 @@ static void cache_flush(void)
 {
 	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (0));
 }
-

cpu/arm_cortexa8/omap3/cache.c

@@ -93,4 +93,3 @@ void l2_cache_disable(void)
 		__asm__ __volatile__("mov r12, %0":"=r"(j));
 	}
 }
-

doc/README.LED

@@ -10,7 +10,7 @@ The first step is to define CONFIG_STATUS_LED in the board config file.
 If the LED support is only for a single board, define CONFIG_BOARD_SPECIFIC_LED
 in the board config file.
 
-At a minimum, these macros must be defined at 
+At a minimum, these macros must be defined at
 STATUS_LED_BIT
 STATUS_LED_STATE
 STATUS_LED_PERIOD
@@ -20,7 +20,7 @@ STATUS_LED_BIT<n>
 STATUS_LED_STATE<n>
 STATUS_LED_PERIOD<n>
 
-Where <n> can a integer 1 through 3. 
+Where <n> can a integer 1 through 3.
 
 STATUS_LED_BIT is passed into the __led_* functions to identify which LED is
 being acted on.  As such, the value choose must be unique with with respect to
@@ -37,25 +37,25 @@ range from 2 to 10.
 Some other LED macros
 
 STATUS_LED_BOOT is the LED to light when the board is booting.  This must be a
-valid STATUS_LED_BIT value. 
+valid STATUS_LED_BIT value.
 
 STATUS_LED_RED is the red LED.  It is used signal errors. This must be a valid
 STATUS_LED_BIT value. Other similar color LED's are STATUS_LED_YELLOW and
-STATUS_LED_BLUE.  
+STATUS_LED_BLUE.
 
 These board must define these functions
 
 __led_init is called once to initialize the LED to STATUS_LED_STATE. One time
 start up code should be placed here.
 
-__led_set is called to change the state of the LED. 
+__led_set is called to change the state of the LED.
 
 __led_toggle is called to toggle the current state of the LED.
 
 Colour LED
 ========================================
 
-Colour LED's are at present only used by ARM. 
+Colour LED's are at present only used by ARM.
 
 The functions names explain their purpose.
 

doc/README.omap3

@@ -156,4 +156,3 @@ http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pd
 [8] TI OMAP3 U-Boot:
 
 http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
-

drivers/qe/uec.c

@@ -1393,5 +1393,3 @@ int uec_standard_init(bd_t *bis)
 {
 	return uec_eth_init(bis, uec_info, ARRAY_SIZE(uec_info));
 }
-
-

include/asm-arm/arch-mx27/imx-regs.h

@@ -1,5 +1,4 @@
 /*
- *
  * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
  * (c) 2009 Ilya Yanok, Emcraft Systems <yanok@emcraft.com>
  *
@@ -506,4 +505,3 @@ struct iim_regs {
 #define IIM1_SUID		1
 
 #endif				/* _IMX_REGS_H */
-

include/configs/P2020DS.h

@@ -110,7 +110,9 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define CONFIG_FSL_DDR3		1
 #undef CONFIG_FSL_DDR_INTERACTIVE
 
-// #define	CONFIG_DDR_ECC /* ECC will be enabled based on perf_mode environment variable */
+/* ECC will be enabled based on perf_mode environment variable */
+/* #define	CONFIG_DDR_ECC */
+
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE	0xDeadBeef
 
@@ -126,7 +128,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy);
 #define SPD_EEPROM_ADDRESS1	0x51	/* CTLR 0 DIMM 0 */
 
 /* These are used when DDR doesn't use SPD.  */
-//#define CONFIG_SYS_SDRAM_SIZE		512		/* DDR is 512MB */
 #define CONFIG_SYS_SDRAM_SIZE		1024		/* DDR is 1GB */
 
 /* Default settings for "stable" mode */

include/linux/mtd/concat.h

@@ -9,7 +9,6 @@
 #ifndef MTD_CONCAT_H
 #define MTD_CONCAT_H
 
-
 struct mtd_info *mtd_concat_create(
     struct mtd_info *subdev[],  /* subdevices to concatenate */
     int num_devs,               /* number of subdevices      */
@@ -18,4 +17,3 @@ struct mtd_info *mtd_concat_create(
 void mtd_concat_destroy(struct mtd_info *mtd);
 
 #endif
-

include/linux/mtd/mtd.h

@@ -113,9 +113,9 @@ struct mtd_oob_ops {
 struct mtd_info {
 	u_char type;
 	u_int32_t flags;
-	uint64_t size;	 // Total size of the MTD
+	uint64_t size;	 /* Total size of the MTD */
 
-	/* "Major" erase size for the device. Naïve users may take this
+	/* "Major" erase size for the device. Naïve users may take this
 	 * to be the only erase size available, or may use the more detailed
 	 * information below if they desire
 	 */