Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530

Browse Source 
The Head acoustics (HA) baseboard used the Technexion TAO3530 SOM
and has only some minor differences to the Technexion Thunder baseboard.
This patch adds support for this HA baseboard / TAO3530 as the "omap3_ha"
build target.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tapani Utriainen <tapani@technexion.com>
Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de>
Cc: Tom Rini <trini@ti.com>
master
Stefan Roese 11 years ago committed by Tom Rini
parent fcd9adc3c6
commit 8f0cbd62ed
3 changed files with 23 additions and 0 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 15
      board/technexion/tao3530/tao3530.c
  2. 7
      board/technexion/tao3530/tao3530.h
  3. 1
      boards.cfg

15
board/technexion/tao3530/tao3530.c
Unescape View File

@ -75,6 +75,18 @@ out:
*/
void get_board_mem_timings(struct board_sdrc_timings *timings)
{
#if defined(CONFIG_SYS_BOARD_OMAP3_HA)
/*
* Switch baseboard LED to red upon power-on
*/
MUX_OMAP3_HA();
/* Request a gpio before using it */
gpio_request(111, "");
/* Sets the gpio as output and its value to 1, switch LED to red */
gpio_direction_output(111, 1);
#endif
if (tao3530_revision() < 3) {
/* 256MB / Bank */
timings->mcfg = MCFG(256 << 20, 14); /* RAS-width 14 */
@ -162,6 +174,9 @@ int misc_init_r(void)
void set_muxconf_regs(void)
{
MUX_TAO3530();
#if defined(CONFIG_SYS_BOARD_OMAP3_HA)
MUX_OMAP3_HA();
#endif
}
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)

7
board/technexion/tao3530/tao3530.h
Unescape View File

@ -9,7 +9,11 @@
const omap3_sysinfo sysinfo = {
DDR_STACKED,
#if defined(CONFIG_SYS_BOARD_OMAP3_HA)
"HEAD acoustics OMAP3-HA",
#else
"OMAP3 TAO-3530 board",
#endif
"NAND",
};
@ -361,4 +365,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) \
MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0))
#define MUX_OMAP3_HA() \
MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M4)) /* GPIO_111 */
#endif

1
boards.cfg
Unescape View File

@ -328,6 +328,7 @@ Active arm armv7 omap3 logicpd zoom1
Active arm armv7 omap3 logicpd zoom2 omap3_zoom2 - Tom Rix <Tom.Rix@windriver.com>
Active arm armv7 omap3 matrix_vision mvblx omap3_mvblx - Michael Jones <michael.jones@matrix-vision.de>
Active arm armv7 omap3 nokia rx51 nokia_rx51 - Pali Rohár <pali.rohar@gmail.com>
Active arm armv7 omap3 technexion tao3530 omap3_ha tao3530:SYS_BOARD_OMAP3_HA Stefan Roese <sr@denx.de>
Active arm armv7 omap3 technexion tao3530 tao3530 - Tapani Utriainen <linuxfae@technexion.com>
Active arm armv7 omap3 technexion twister twister - Stefano Babic <sbabic@denx.de>
Active arm armv7 omap3 teejet mt_ventoux mt_ventoux - Stefano Babic <sbabic@denx.de>

Write Preview
Loading…
Cancel
Save