Update Freescale 85xx boards to sys_eeprom.c

The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
format, and so it obsoletes board/freescale/common/cds_eeprom.c.  Freescale
86xx boards already use sys_eeprom.c, so this patch migrates the remaining
Freescale 85xx boards to use it as well.  cds_eeprom.c is deleted.

Signed-off-by: Timur Tabi <timur@freescale.com>

board/freescale/common/Makefile

@@ -30,7 +30,6 @@ endif
 LIB	= $(obj)lib$(VENDOR).a
 
 COBJS-${CONFIG_FSL_CADMUS}	+= cadmus.o
-COBJS-${CONFIG_FSL_CDS_EEPROM}	+= cds_eeprom.o
 COBJS-${CONFIG_FSL_VIA}		+= cds_via.o
 COBJS-${CONFIG_FSL_DIU_FB}	+= fsl_diu_fb.o fsl_logo_bmp.o
 COBJS-${CONFIG_FSL_PIXIS}	+= pixis.o

board/freescale/common/cds_eeprom.c

@@ -1,60 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <i2c.h>
-
-#include "eeprom.h"
-
-
-typedef struct {
-	char idee_pcbid[4];		/* "CCID" for CDC v1.X */
-	u8 idee_major;
-	u8 idee_minor;
-	char idee_serial[10];
-	char idee_errata[2];
-	char idee_date[8];		/* yyyymmdd */
-	/* The rest of the EEPROM space is reserved */
-} id_eeprom_t;
-
-
-unsigned int
-get_cpu_board_revision(void)
-{
-	uint major = 0;
-	uint minor = 0;
-
-	id_eeprom_t id_eeprom;
-
-	i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2,
-		 (uchar *) &id_eeprom, sizeof(id_eeprom));
-
-	major = id_eeprom.idee_major;
-	minor = id_eeprom.idee_minor;
-
-	if (major == 0xff && minor == 0xff) {
-		major = minor = 0;
-	}
-
-	return MPC85XX_CPU_BOARD_REV(major,minor);
-}

include/configs/MPC8541CDS.h

@@ -44,7 +44,6 @@
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_FSL_VIA
-#define CONFIG_FSL_CDS_EEPROM
 
 /*
  * When initializing flash, if we cannot find the manufacturer ID,
@@ -328,11 +327,17 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x57
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
 #define CFG_I2C_OFFSET		0x3000
 
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CFG_I2C_EEPROM_CCID
+#define CFG_ID_EEPROM
+#define CFG_I2C_EEPROM_ADDR     0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.

include/configs/MPC8548CDS.h

@@ -50,7 +50,6 @@
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_FSL_VIA
-#define CONFIG_FSL_CDS_EEPROM
 
 /*
  * When initializing flash, if we cannot find the manufacturer ID,
@@ -352,11 +351,17 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x57
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
 #define CFG_I2C_OFFSET		0x3000
 
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CFG_I2C_EEPROM_CCID
+#define CFG_ID_EEPROM
+#define CFG_I2C_EEPROM_ADDR     0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.

include/configs/MPC8555CDS.h

@@ -43,7 +43,7 @@
 #define CONFIG_FSL_LAW		1	/* Use common FSL init code */
 
 #define CONFIG_FSL_VIA
-#define CONFIG_FSL_CDS_EEPROM
+
 
 /*
  * When initializing flash, if we cannot find the manufacturer ID,
@@ -325,11 +325,17 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x57
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
 #define CFG_I2C_OFFSET		0x3000
 
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CFG_I2C_EEPROM_CCID
+#define CFG_ID_EEPROM
+#define CFG_I2C_EEPROM_ADDR     0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+
 /*
  * General PCI
  * Addresses are mapped 1-1.