board/BuR/kwb: use bootvx(...) (with bootline feature) instead go(...)

Since we don't have for sure a valid IP-setup during
board_late_init(...) because it maybe allready stored in environment or
not, we cannot form a proper vxWorks bootline at this place.

So we move to the way, forming the bootline just before
executing/launching vxWorks. To do this we use the bootvx command
instead go.

We only have to form the "othbootargs" environment variable, the rest is
done pretty good by the "bootvx" commannd.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

board/BuR/kwb/board.c

@@ -47,10 +47,6 @@
 #define	RSTCTRL_FORCE_PWR_NEN			0x0404
 #define	RSTCTRL_CAN_STB				0x4040
 
-#define VXWORKS_BOOTLINE			0x80001100
-#define DEFAULT_BOOTLINE	"cpsw(0,0):pme/vxWorks"
-#define VXWORKS_USER		"u=vxWorksFTP pw=vxWorks tn=vxtarget"
-
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_SPL_BUILD)
@@ -281,20 +277,15 @@ int board_late_init(void)
 	} else {
 		puts("ERROR: i2c_set_bus_speed failed! (scratchregister)\n");
 	}
-	/* setup vxworks bootline */
-	char *vxworksbootline = (char *)VXWORKS_BOOTLINE;
-	sprintf(vxworksbootline,
-		"%s h=%s e=%s:%s g=%s %s o=0x%08x;0x%08x;0x%08x;0x%08x",
-		DEFAULT_BOOTLINE,
-		getenv("serverip"),
-		getenv("ipaddr"), getenv("netmask"),
-		getenv("gatewayip"),
-		VXWORKS_USER,
-		(unsigned int) gd->fb_base-0x20,
-		(u32)getenv_ulong("vx_memtop", 16, gd->fb_base-0x20),
-		(u32)getenv_ulong("vx_romfsbase", 16, 0),
-		(u32)getenv_ulong("vx_romfssize", 16, 0));
-
+	/* setup othbootargs for bootvx-command (vxWorks bootline) */
+	char othbootargs[128];
+	snprintf(othbootargs, sizeof(othbootargs),
+		 "u=vxWorksFTP pw=vxWorks o=0x%08x;0x%08x;0x%08x;0x%08x",
+		 (unsigned int) gd->fb_base-0x20,
+		 (u32)getenv_ulong("vx_memtop", 16, gd->fb_base-0x20),
+		 (u32)getenv_ulong("vx_romfsbase", 16, 0),
+		 (u32)getenv_ulong("vx_romfssize", 16, 0));
+	setenv("othbootargs", othbootargs);
 	/*
 	 * reset VBAR registers to its reset location, VxWorks 6.9.3.2 does
 	 * expect that vectors are there, original u-boot moves them to _start

configs/kwb_defconfig

@@ -3,6 +3,9 @@ CONFIG_TARGET_KWB=y
 CONFIG_SPL=y
 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
 CONFIG_SYS_PROMPT="U-Boot (BuR V2.0)# "
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTM is not set
+# CONFIG_CMD_GO is not set
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_XIMG is not set

include/configs/kwb.h

@@ -57,6 +57,8 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
 BUR_COMMON_ENV \
+"bootaddr=0x80001100\0" \
+"bootdev=cpsw(0,0)\0" \
 "vx_romfsbase=0x800E0000\0" \
 "vx_romfssize=0x20000\0" \
 "vx_memtop=0x8FBEF000\0" \
@@ -66,7 +68,7 @@ BUR_COMMON_ENV \
 "logoaddr=0x82000000\0" \
 "defaultARlen=0x8000\0" \
 "loaddefaultAR=mmc read ${loadaddr} 800 ${defaultARlen}\0" \
-"defaultAR=run loadromfs; run loaddefaultAR; go ${loadaddr}\0" \
+"defaultAR=run loadromfs; run loaddefaultAR; bootvx ${loadaddr}\0" \
 "logo0=fatload mmc 0:1 ${logoaddr} SYSTEM/ADDON/Bootlogo/Bootlogo.bmp.gz && " \
 	"bmp display ${logoaddr} 0 0\0" \
 "logo1=fatload mmc 0:1 ${logoaddr} SYSTEM/BASE/Bootlogo/Bootlogo.bmp.gz && " \
@@ -74,11 +76,11 @@ BUR_COMMON_ENV \
 "mmcboot=echo booting AR from eMMC-flash ...; "\
 	"run logo0 || run logo1; " \
 	"run loadromfs; " \
-	"fatload mmc 0:1 ${loadaddr} arimg && go ${loadaddr}; " \
+	"fatload mmc 0:1 ${loadaddr} arimg && bootvx ${loadaddr}; " \
 	"run defaultAR;\0" \
 "netboot=echo booting AR from network ...; " \
 	"run loadromfs; " \
-	"tftp ${loadaddr} arimg && go ${loadaddr}; " \
+	"tftp ${loadaddr} arimg && bootvx ${loadaddr}; " \
 	"puts 'networkboot failed!';\0" \
 "netscript=echo running script from network (tftp) ...; " \
 	"tftp 0x80000000 netscript.img && source; " \