bitops: introduce BIT() definition

introduce BIT() definition, used in at91_udc gadget
driver.

Signed-off-by: Heiko Schocher <hs@denx.de>
[remove all other occurrences of BIT(x) definition]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
master
Heiko Schocher 9 years ago committed by Tom Rini
parent 9d2f6a9ae7
commit 92a3188d7d
  1. 1
      arch/arm/include/asm/arch-am33xx/cpu.h
  2. 2
      arch/arm/include/asm/arch-hi6220/gpio.h
  3. 2
      arch/arm/include/asm/arch-omap5/cpu.h
  4. 2
      arch/arm/include/asm/arch-tegra/dc.h
  5. 2
      arch/arm/mach-davinci/cpu.c
  6. 2
      arch/arm/mach-keystone/include/mach/clock_defs.h
  7. 2
      arch/arm/mach-keystone/include/mach/hardware.h
  8. 2
      arch/arm/mach-mvebu/include/mach/soc.h
  9. 2
      arch/arm/mach-zynq/include/mach/gpio.h
  10. 2
      drivers/ddr/marvell/a38x/ddr3_init.h
  11. 1
      drivers/mtd/nand/jz4740_nand.c
  12. 2
      drivers/spi/davinci_spi.c
  13. 2
      drivers/spi/ep93xx_spi.c
  14. 2
      drivers/video/anx9804.c
  15. 1
      include/fsl-mc/fsl_mc.h
  16. 2
      include/linux/bitops.h

@ -17,7 +17,6 @@
#include <asm/arch/hardware.h>
#define BIT(x) (1 << x)
#define CL_BIT(x) (0 << x)
/* Timer register bits */

@ -11,8 +11,6 @@
#define HI6220_GPIO_BASE(bank) (((bank < 4) ? 0xf8011000 : \
0xf7020000 - 0x4000) + (0x1000 * bank))
#define BIT(x) (1 << (x))
#define HI6220_GPIO_PER_BANK 8
#define HI6220_GPIO_DIR 0x400

@ -56,8 +56,6 @@ struct watchdog {
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL_STRICT_NAMES */
#define BIT(x) (1 << (x))
#define WD_UNLOCK1 0xAAAA
#define WD_UNLOCK2 0x5555

@ -364,8 +364,6 @@ struct dc_ctlr {
struct dc_winbuf_reg winbuf; /* WINBUF A/B/C 0x800 ~ 0x80d */
};
#define BIT(pos) (1U << pos)
/* DC_CMD_DISPLAY_COMMAND 0x032 */
#define CTRL_MODE_SHIFT 5
#define CTRL_MODE_MASK (0x3 << CTRL_MODE_SHIFT)

@ -28,8 +28,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define PLLC_PLLDIV8 0x170
#define PLLC_PLLDIV9 0x174
#define BIT(x) (1 << (x))
/* SOC-specific pll info */
#ifdef CONFIG_SOC_DM355
#define ARM_PLLDIV PLLC_PLLDIV1

@ -11,8 +11,6 @@
#include <asm/arch/hardware.h>
#define BIT(x) (1 << (x))
/* PLL Control Registers */
struct pllctl_regs {
u32 ctl; /* 00 */

@ -24,8 +24,6 @@ typedef volatile unsigned int *dv_reg_p;
#endif
#define BIT(x) (1 << (x))
#define KS2_DDRPHY_PIR_OFFSET 0x04
#define KS2_DDRPHY_PGCR0_OFFSET 0x08
#define KS2_DDRPHY_PGCR1_OFFSET 0x0C

@ -11,8 +11,6 @@
#ifndef _MVEBU_SOC_H
#define _MVEBU_SOC_H
#define BIT(x) (1 << (x))
#define SOC_MV78460_ID 0x7846
#define SOC_88F6810_ID 0x6810
#define SOC_88F6820_ID 0x6820

@ -71,6 +71,4 @@
/* GPIO upper 16 bit mask */
#define ZYNQ_GPIO_UPPER_MASK 0xFFFF0000
#define BIT(x) (1<<x)
#endif /* _ZYNQ_GPIO_H */

@ -32,8 +32,6 @@
*/
#define MV_DEBUG_INIT
#define BIT(x) (1 << (x))
#ifdef MV_DEBUG_INIT
#define DEBUG_INIT_S(s) puts(s)
#define DEBUG_INIT_D(d, l) printf("%x", d)

@ -16,7 +16,6 @@
#define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000)
#define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000)
#define BIT(x) (1 << (x))
#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
#define JZ_NAND_ECC_CTRL_RS BIT(2)
#define JZ_NAND_ECC_CTRL_RESET BIT(1)

@ -15,8 +15,6 @@
#include <asm/io.h>
#include <asm/arch/hardware.h>
#define BIT(x) (1 << (x))
/* SPIGCR0 */
#define SPIGCR0_SPIENA_MASK 0x1
#define SPIGCR0_SPIRST_MASK 0x0

@ -16,8 +16,6 @@
#include <asm/arch/ep93xx.h>
#define BIT(x) (1<<(x))
#define SSPBASE SPI_BASE
#define SSPCR0 0x0000

@ -14,8 +14,6 @@
#include <i2c.h>
#include "anx9804.h"
#define BIT(x) (1 << (x))
/* Registers at i2c address 0x38 */
#define ANX9804_HDCP_CONTROL_0_REG 0x01

@ -12,7 +12,6 @@
#define MC_CCSR_BASE_ADDR \
((struct mc_ccsr_registers __iomem *)0x8340000)
#define BIT(x) (1 << (x))
#define GCR1_P1_STOP BIT(31)
#define GCR1_P2_STOP BIT(30)
#define GCR1_P1_DE_RST BIT(23)

@ -3,6 +3,8 @@
#include <asm/types.h>
#define BIT(nr) (1UL << (nr))
/*
* ffs: find first bit set. This is defined the same way as
* the libc and compiler builtin ffs routines, therefore

Loading…
Cancel
Save