powerpc/mpc85xx: Display a warning for unsupported DDR data rates

If DDR initialziation uses a speed table and the speed is not matched,
print a warning message instead of silently ignoring.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
master
York Sun 14 years ago committed by Kumar Gala
parent 79fa00af5d
commit 939e5bf9b3
  1. 6
      board/freescale/corenet_ds/ddr.c
  2. 8
      board/freescale/mpc8572ds/ddr.c
  3. 5
      board/freescale/mpc8641hpcn/ddr.c
  4. 6
      board/freescale/p2020ds/ddr.c
  5. 6
      board/xes/xpedite550x/ddr.c

@ -192,10 +192,16 @@ void fsl_ddr_board_options(memctl_options_t *popts,
popts->clk_adjust = pbsp->clk_adjust;
popts->wrlvl_start = pbsp->wrlvl_start;
popts->twoT_en = pbsp->force_2T;
break;
}
pbsp++;
}
if (i == num_params) {
printf("Warning: board specific timing not found "
"for data rate %lu MT/s!\n", ddr_freq);
}
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed

@ -104,7 +104,6 @@ void fsl_ddr_board_options(memctl_options_t *popts,
u32 num_params;
u32 i;
ulong ddr_freq;
int matched = 0;
if (!pdimm->n_ranks)
return;
@ -151,14 +150,15 @@ void fsl_ddr_board_options(memctl_options_t *popts,
popts->cpo_override = pbsp->cpo;
popts->write_data_delay = pbsp->write_data_delay;
popts->twoT_en = pbsp->force_2T;
matched = 1;
break;
}
pbsp++;
}
if (!matched)
printf("Warning: board specific timing not found!\n");
if (i == num_params) {
printf("Warning: board specific timing not found "
"for data rate %lu MT/s!\n", ddr_freq);
}
/*
* Factors to consider for half-strength driver enable:

@ -127,6 +127,11 @@ void fsl_ddr_board_options(memctl_options_t *popts,
}
}
if (i == num_params) {
printf("Warning: board specific timing not found "
"for data rate %lu MT/s!\n", ddr_freq);
}
/* 2T timing enable */
popts->twoT_en = 1;
}

@ -83,10 +83,16 @@ void fsl_ddr_board_options(memctl_options_t *popts,
popts->cpo_override = pbsp->cpo;
popts->write_data_delay = pbsp->write_data_delay;
popts->twoT_en = pbsp->force_2T;
break;
}
pbsp++;
}
if (i == num_params) {
printf("Warning: board specific timing not found "
"for data rate %lu MT/s!\n", ddr_freq);
}
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed

@ -125,10 +125,16 @@ void fsl_ddr_board_options(memctl_options_t *popts,
popts->clk_adjust = pbsp->clk_adjust;
popts->cpo_override = pbsp->cpo;
popts->twoT_en = 0;
break;
}
pbsp++;
}
if (i == num_params) {
printf("Warning: board specific timing not found "
"for data rate %lu MT/s!\n", ddr_freq);
}
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed

Loading…
Cancel
Save