mtd: MTD related config header changes (mtdparts command)

By changing the cmd_mtdparts to only use the MTD infrastructure and
not the direct interface to the CFI NOR FLASH driver we now need
to add the MTD infrastructure to all boards using those mtdparts
commands. This patch adds those components:

CONFIG_MTD_DEVICE (for all FLASH types)

plus

CONFIG_FLASH_CFI_MTD (for NOR FLASH)

To all board maintainers: Please test this on your platforms and
report any problems/issues found. Thanks.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Ron Madrid <info@sheldoninst.com>
Cc: Georg Schardt <schardt@team-ctech.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Martin Krause <martin.krause@tqs.de>
Cc: Gary Jennejohn <garyj@denx.de>
Cc: Ricardo Ribalda <ricardo.ribalda@uam.es>

include/configs/BC3450.h

@@ -347,6 +347,8 @@
 
 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM5200-0"
 #define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
 						"1408k(kernel),"	\

include/configs/FPS850L.h

@@ -217,6 +217,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\

include/configs/FPS860L.h

@@ -217,6 +217,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\

include/configs/SIMPC8313.h

@@ -190,6 +190,7 @@
 
 /* mtdparts command line support */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT		"nand0=nand0"
 #define MTDPARTS_DEFAULT	"mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)"
 

include/configs/TB5200.h

@@ -276,6 +276,8 @@
 
 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM5200-0"
 #if defined(CONFIG_TQM5200_B)
 #define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:768k(firmware),"	\

include/configs/TQM5200.h

@@ -408,6 +408,8 @@
 
 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM5200-0"
 
 #ifdef CONFIG_STK52XX

include/configs/TQM823L.h

@@ -232,6 +232,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\

include/configs/TQM823M.h

@@ -228,6 +228,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\

include/configs/TQM834x.h

@@ -534,6 +534,8 @@ extern int tqm834x_num_flash_banks;
  */
 /* mtdparts command line support */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM834x-0"
 
 /* default mtd partition table */

include/configs/TQM850L.h

@@ -217,6 +217,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\

include/configs/TQM850M.h

@@ -217,6 +217,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\

include/configs/TQM855L.h

@@ -222,6 +222,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\

include/configs/TQM855M.h

@@ -257,6 +257,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\

include/configs/TQM85xx.h

@@ -567,6 +567,8 @@
 #define	CONFIG_JFFS2_NAND	1
 
 #ifdef CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nand0=TQM85xx-nand"
 #define MTDPARTS_DEFAULT	"mtdparts=TQM85xx-nand:-"
 #else

include/configs/TQM860L.h

@@ -221,6 +221,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\

include/configs/TQM860M.h

@@ -222,6 +222,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\

include/configs/TQM862L.h

@@ -225,6 +225,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\

include/configs/TQM862M.h

@@ -226,6 +226,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\

include/configs/TQM866M.h

@@ -266,6 +266,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\

include/configs/apollon.h

@@ -124,6 +124,7 @@
 #define	CONFIG_CMD_JFFS2
 #define	CONFIG_CMD_UBI
 #define	CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
 #endif
 

include/configs/cm5200.h

@@ -223,6 +223,8 @@
  * MTD configuration
  */
 #define CONFIG_CMD_MTDPARTS	1
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=cm5200-0"
 #define MTDPARTS_DEFAULT	"mtdparts=cm5200-0:"			\
 					"384k(uboot),128k(env),"	\

include/configs/fx12mm.h

@@ -38,6 +38,8 @@
 /* cmd config */
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #undef CONFIG_CMD_NET
 
 /* sdram */

include/configs/idmr.h

@@ -230,6 +230,8 @@
 
 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=idmr-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=idmr-0:128k(u-boot),"	\

include/configs/microblaze-generic.h

@@ -260,6 +260,8 @@
 #if defined(CONFIG_CMD_JFFS2)
 /* JFFS2 partitions */
 #define CONFIG_CMD_MTDPARTS	/* mtdparts command line support */
+#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=ml401-0"
 
 /* default mtd partition table */

include/configs/motionpro.h

@@ -276,6 +276,8 @@
  * MTD configuration
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=motionpro-0"
 #define MTDPARTS_DEFAULT	"mtdparts=motionpro-0:"			  \
 					"13m(fs),2m(kernel),256k(uboot)," \

include/configs/mx1fs2.h

@@ -183,6 +183,8 @@
 /* mtdparts command line support */
 /* Note: fake mtd_id used, no linux mtd map file */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=mx1fs2-0"
 
 #ifdef BUS32BIT_VERSION

include/configs/netstar.h

@@ -130,6 +130,8 @@
  * partitions (mtdparts command line support)
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=omapflash.0,nand0=omapnand.0"
 #define MTDPARTS_DEFAULT	"mtdparts=" \
 	"omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \

include/configs/omap3_beagle.h

@@ -105,6 +105,7 @@
 #define CONFIG_CMD_FAT		/* FAT support			*/
 #define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
+#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT			"nand0=nand"
 #define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
 					"1920k(u-boot),128k(u-boot-env),"\

include/configs/qong.h

@@ -213,6 +213,8 @@
  * JFFS2 partitions
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=physmap-flash.0"
 #define MTDPARTS_DEFAULT	\
 	"mtdparts=physmap-flash.0:256k(U-Boot),128k(env1),"	\

include/configs/smmaco4.h

@@ -215,6 +215,8 @@
 
 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM5200-0"
 #define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
 						"1408k(kernel),"	\

include/configs/trab.h

@@ -375,6 +375,8 @@
 
 /* Dynamic MTD partition support */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=0"
 
 /* production flash layout */

include/configs/vct.h

@@ -296,6 +296,7 @@ int vct_gpio_get(int pin);
 #define	CONFIG_CMD_JFFS2
 #define	CONFIG_CMD_UBI
 #define	CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_CMD_MTDPARTS
 

include/configs/virtlab2.h

@@ -226,6 +226,8 @@
  * Dynamic MTD partition support
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
 
 #define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\

include/configs/voiceblue.h

@@ -190,6 +190,8 @@
  * JFFS2 partitions (mtdparts command line support)
  */
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=omapflash.0"
 #define MTDPARTS_DEFAULT	"mtdparts=omapflash.0:256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)"
 

include/configs/xilinx-ppc.h

@@ -109,6 +109,8 @@
 #define	CONFIG_SYS_FLASH_PROTECTION
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
 #else
 #define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_SYS_NO_FLASH