Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

mmc: exynos_dw_mmc: restore the property into host

Browse Source 
Restore the platdata(property of dt) into host struct.
Then data's information is maintained and reused anywhere.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
master
Jaehoon Chung 11 years ago committed by Minkyu Kang
parent 7d3ca0f89d
commit 959198f7ca
2 changed files with 133 additions and 73 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 204
      drivers/mmc/exynos_dw_mmc.c
  2. 2
      include/dwmmc.h

204
drivers/mmc/exynos_dw_mmc.c
Unescape View File

@ -13,6 +13,8 @@
#include <asm/arch/dwmmc.h>
#include <asm/arch/clk.h>
#include <asm/arch/pinmux.h>
#include <asm/gpio.h>
#include <asm-generic/errno.h>
#define DWMMC_MAX_CH_NUM 4
#define DWMMC_MAX_FREQ 52000000
@ -44,7 +46,11 @@ unsigned int exynos_dwmci_get_clk(struct dwmci_host *host)
& DWMCI_DIVRATIO_MASK) + 1;
sclk = get_mmc_clk(host->dev_index);
return sclk / clk_div;
/*
* Assume to know divider value.
* When clock unit is broken, need to set "host->div"
*/
return sclk / clk_div / (host->div + 1);
}
static void exynos_dwmci_board_init(struct dwmci_host *host)
@ -60,45 +66,32 @@ static void exynos_dwmci_board_init(struct dwmci_host *host)
}
}
/*
* This function adds the mmc channel to be registered with mmc core.
* index - mmc channel number.
* regbase - register base address of mmc channel specified in 'index'.
* bus_width - operating bus width of mmc channel specified in 'index'.
* clksel - value to be written into CLKSEL register in case of FDT.
* NULL in case od non-FDT.
*/
int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
static int exynos_dwmci_core_init(struct dwmci_host *host, int index)
{
struct dwmci_host *host = NULL;
unsigned int div;
unsigned long freq, sclk;
host = malloc(sizeof(struct dwmci_host));
if (!host) {
printf("dwmci_host malloc fail!\n");
return 1;
}
if (host->bus_hz)
freq = host->bus_hz;
else
freq = DWMMC_MAX_FREQ;
/* request mmc clock vlaue of 52MHz. */
freq = 52000000;
sclk = get_mmc_clk(index);
div = DIV_ROUND_UP(sclk, freq);
/* set the clock divisor for mmc */
set_mmc_clk(index, div);
host->name = "EXYNOS DWMMC";
host->ioaddr = (void *)regbase;
host->buswidth = bus_width;
#ifdef CONFIG_EXYNOS5420
host->quirks = DWMCI_QUIRK_DISABLE_SMU;
#endif
host->board_init = exynos_dwmci_board_init;
if (clksel) {
host->clksel_val = clksel;
} else {
if (0 == index)
if (!host->clksel_val) {
if (index == 0)
host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
if (2 == index)
else if (index == 2)
host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
}
@ -113,69 +106,134 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
return 0;
}
/*
* This function adds the mmc channel to be registered with mmc core.
* index - mmc channel number.
* regbase - register base address of mmc channel specified in 'index'.
* bus_width - operating bus width of mmc channel specified in 'index'.
* clksel - value to be written into CLKSEL register in case of FDT.
* NULL in case od non-FDT.
*/
int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
{
struct dwmci_host *host = NULL;
host = malloc(sizeof(struct dwmci_host));
if (!host) {
error("dwmci_host malloc fail!\n");
return -ENOMEM;
}
host->ioaddr = (void *)regbase;
host->buswidth = bus_width;
if (clksel)
host->clksel_val = clksel;
return exynos_dwmci_core_init(host, index);
}
#ifdef CONFIG_OF_CONTROL
int exynos_dwmmc_init(const void *blob)
static struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM];
static int do_dwmci_init(struct dwmci_host *host)
{
int index, bus_width;
int node_list[DWMMC_MAX_CH_NUM];
int err = 0, dev_id, flag, count, i;
u32 clksel_val, base, timing[3];
int index, flag, err;
count = fdtdec_find_aliases_for_id(blob, "mmc",
COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
DWMMC_MAX_CH_NUM);
index = host->dev_index;
for (i = 0; i < count; i++) {
int node = node_list[i];
flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
err = exynos_pinmux_config(host->dev_id, flag);
if (err) {
debug("DWMMC not configure\n");
return err;
}
if (node <= 0)
continue;
return exynos_dwmci_core_init(host, index);
}
/* Extract device id for each mmc channel */
dev_id = pinmux_decode_periph_id(blob, node);
static int exynos_dwmci_get_config(const void *blob, int node,
struct dwmci_host *host)
{
int err = 0;
u32 base, clksel_val, timing[3];
/* Get the bus width from the device node */
bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
if (bus_width <= 0) {
debug("DWMMC: Can't get bus-width\n");
return -1;
}
if (8 == bus_width)
flag = PINMUX_FLAG_8BIT_MODE;
else
flag = PINMUX_FLAG_NONE;
/* Extract device id for each mmc channel */
host->dev_id = pinmux_decode_periph_id(blob, node);
/* config pinmux for each mmc channel */
err = exynos_pinmux_config(dev_id, flag);
if (err) {
debug("DWMMC not configured\n");
return err;
}
/* Get the bus width from the device node */
host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
if (host->buswidth <= 0) {
debug("DWMMC: Can't get bus-width\n");
return -EINVAL;
}
index = dev_id - PERIPH_ID_SDMMC0;
host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
if (host->dev_index == host->dev_id)
host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
/* Get the base address from the device node */
base = fdtdec_get_addr(blob, node, "reg");
if (!base) {
debug("DWMMC: Can't get base address\n");
return -1;
}
/* Extract the timing info from the node */
err = fdtdec_get_int_array(blob, node, "samsung,timing",
timing, 3);
/* Set the base address from the device node */
base = fdtdec_get_addr(blob, node, "reg");
if (!base) {
debug("DWMMC: Can't get base address\n");
return -EINVAL;
}
host->ioaddr = (void *)base;
/* Extract the timing info from the node */
err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
if (err) {
debug("Can't get sdr-timings for devider\n");
return -EINVAL;
}
clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
DWMCI_SET_DRV_CLK(timing[1]) |
DWMCI_SET_DIV_RATIO(timing[2]));
if (clksel_val)
host->clksel_val = clksel_val;
host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0);
host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0);
host->div = fdtdec_get_int(blob, node, "div", 0);
return 0;
}
static int exynos_dwmci_process_node(const void *blob,
int node_list[], int count)
{
struct dwmci_host *host;
int i, node, err;
for (i = 0; i < count; i++) {
node = node_list[i];
if (node <= 0)
continue;
host = &dwmci_host[i];
err = exynos_dwmci_get_config(blob, node, host);
if (err) {
debug("Can't get sdr-timings for divider\n");
return -1;
debug("%s: failed to decode dev %d\n", __func__, i);
return err;
}
clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
DWMCI_SET_DRV_CLK(timing[1]) |
DWMCI_SET_DIV_RATIO(timing[2]));
/* Initialise each mmc channel */
err = exynos_dwmci_add_port(index, base, bus_width, clksel_val);
if (err)
debug("dwmmc Channel-%d init failed\n", index);
do_dwmci_init(host);
}
return 0;
}
int exynos_dwmmc_init(const void *blob)
{
int compat_id;
int node_list[DWMMC_MAX_CH_NUM];
int err = 0, count;
compat_id = COMPAT_SAMSUNG_EXYNOS_DWMMC;
count = fdtdec_find_aliases_for_id(blob, "mmc",
compat_id, node_list, DWMMC_MAX_CH_NUM);
err = exynos_dwmci_process_node(blob, node_list, count);
return err;
}
#endif

2
include/dwmmc.h
Unescape View File

@ -134,7 +134,9 @@ struct dwmci_host {
unsigned int version;
unsigned int clock;
unsigned int bus_hz;
unsigned int div;
int dev_index;
int dev_id;
int buswidth;
u32 clksel_val;
u32 fifoth_val;

Write Preview
Loading…
Cancel
Save