Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Convert CONFIG_APBH_DMA et al to Kconfig

Browse Source 
This converts the following to Kconfig:
   CONFIG_APBH_DMA
   CONFIG_APBH_DMA_BURST
   CONFIG_APBH_DMA_BURST8

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
[trini: Add in MMC as well]
Signed-off-by: Tom Rini <trini@konsulko.com>
master
Adam Ford 7 years ago committed by Tom Rini
parent 99dcbdd8a3
commit 99bec1aead
18 changed files with 22 additions and 44 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 15
      drivers/dma/Kconfig
  2. 4
      drivers/mmc/Kconfig
  3. 3
      drivers/mtd/nand/Kconfig
  4. 3
      include/configs/aristainetos-common.h
  5. 3
      include/configs/cm_fx6.h
  6. 3
      include/configs/colibri_imx7.h
  7. 3
      include/configs/gw_ventana.h
  8. 4
      include/configs/imx6-engicam.h
  9. 3
      include/configs/imx6_logic.h
  10. 3
      include/configs/mx6sabreauto.h
  11. 3
      include/configs/mx6sxsabreauto.h
  12. 3
      include/configs/mx7dsabresd.h
  13. 1
      include/configs/mxs.h
  14. 3
      include/configs/pcm058.h
  15. 3
      include/configs/pfla02.h
  16. 3
      include/configs/platinum.h
  17. 3
      include/configs/titanium.h
  18. 3
      scripts/config_whitelist.txt

15
drivers/dma/Kconfig
Unescape View File

@ -19,4 +19,19 @@ config TI_EDMA3
This driver support data transfer between memory
regions.
config APBH_DMA
bool "Support APBH DMA"
depends on MX23 || MX28 || MX6 || MX7
help
Enable APBH DMA driver.
if APBH_DMA
config APBH_DMA_BURST
bool "Enable DMA BURST"
config APBH_DMA_BURST8
bool "Enable DMA BURST8"
endif
endmenu # menu "DMA Support"

4
drivers/mmc/Kconfig
Unescape View File

@ -209,6 +209,10 @@ config MMC_MXC
config MMC_MXS
bool "Freescale MXS Multimedia Card Interface support"
depends on MX23 || MX28 || MX6 || MX7
select APBH_DMA
select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
help
This selects the Freescale SSP MMC controller found on MXS based
platforms like mx23/28.

3
drivers/mtd/nand/Kconfig
Unescape View File

@ -142,6 +142,9 @@ config NAND_MXS
bool "MXS NAND support"
depends on MX23 || MX28 || MX6 || MX7
imply CMD_NAND
select APBH_DMA
select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
help
This enables NAND driver for the NAND flash controller on the
MXS processors.

3
include/configs/aristainetos-common.h
Unescape View File

@ -182,9 +182,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
/* RTC */
#define CONFIG_SYS_I2C_RTC_ADDR 0x68

3
include/configs/cm_fx6.h
Unescape View File

@ -184,9 +184,6 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* APBH DMA is required for NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
#endif
/* Ethernet */

3
include/configs/colibri_imx7.h
Unescape View File

@ -170,9 +170,6 @@
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

3
include/configs/gw_ventana.h
Unescape View File

@ -73,9 +73,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
#endif
#endif /* CONFIG_SPI_FLASH */

4
include/configs/imx6-engicam.h
Unescape View File

@ -161,10 +161,6 @@
/* MTD device */
# define CONFIG_MTD_DEVICE
# define CONFIG_MTD_PARTITIONS
# define CONFIG_APBH_DMA
# define CONFIG_APBH_DMA_BURST
# define CONFIG_APBH_DMA_BURST8
#endif
/* Ethernet */

3
include/configs/imx6_logic.h
Unescape View File

@ -153,9 +153,6 @@
# define CONFIG_MTD_PARTITIONS
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
/* EEPROM contains serial no, MAC addr and other Logic PD info */
#define CONFIG_I2C_EEPROM

3
include/configs/mx6sabreauto.h
Unescape View File

@ -72,9 +72,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
/* PMIC */
#define CONFIG_POWER

3
include/configs/mx6sxsabreauto.h
Unescape View File

@ -125,9 +125,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
/* Network */

3
include/configs/mx7dsabresd.h
Unescape View File

@ -197,9 +197,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
#endif
#define CONFIG_ENV_OFFSET (12 * SZ_64K)

1
include/configs/mxs.h
Unescape View File

@ -99,7 +99,6 @@
*/
/* APBH DMA */
#define CONFIG_APBH_DMA
/* GPIO */
#define CONFIG_MXS_GPIO

3
include/configs/pcm058.h
Unescape View File

@ -65,9 +65,6 @@
#endif
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
/* Filesystem support */
#define CONFIG_MTD_PARTITIONS

3
include/configs/pfla02.h
Unescape View File

@ -64,9 +64,6 @@
#endif
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
/* Filesystem support */
#define CONFIG_MTD_PARTITIONS

3
include/configs/platinum.h
Unescape View File

@ -75,9 +75,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA config, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
/* Environment in NAND */
#define CONFIG_ENV_OFFSET (16 << 20)

3
include/configs/titanium.h
Unescape View File

@ -148,9 +148,6 @@
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
/* Environment in NAND */
#define CONFIG_ENV_OFFSET (16 << 20)

3
scripts/config_whitelist.txt
Unescape View File

@ -31,9 +31,6 @@ CONFIG_AM335X_USB1_MODE
CONFIG_AM437X_USB2PHY2_HOST
CONFIG_ANDES_PCU
CONFIG_ANDES_PCU_BASE
CONFIG_APBH_DMA
CONFIG_APBH_DMA_BURST
CONFIG_APBH_DMA_BURST8
CONFIG_APER_0_BASE
CONFIG_APER_1_BASE
CONFIG_APER_SIZE

Write Preview
Loading…
Cancel
Save