Blackfin: enable -O2 in lib_generic/ for ADI/Bluetechnix boards

Building the compression code in lib_generic/ with -O2 rather than -Os
gives a nice speed boost without too much code size increase.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

board/bf518f-ezbrd/config.mk

@@ -26,5 +26,8 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf526-ezbrd/config.mk

@@ -26,5 +26,8 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf527-ezkit/config.mk

@@ -26,5 +26,8 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf533-ezkit/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf533-stamp/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf537-stamp/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6

board/bf538f-ezkit/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf548-ezkit/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA       := --dma 6
 LDR_FLAGS-BFIN_BOOT_FIFO       := --dma 1

board/bf561-ezkit/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/cm-bf527/config.mk

@@ -26,5 +26,8 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/cm-bf533/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/cm-bf537e/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/cm-bf548/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA       := --dma 6
 LDR_FLAGS-BFIN_BOOT_FIFO       := --dma 1

board/cm-bf561/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/tcm-bf537/config.mk

@@ -26,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+CFLAGS_lib_generic += -O2
+CFLAGS_lzma += -O2
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))