Add support for SD/eMMC controller present on some Qualcomm Snapdragon devices. This controller implements SDHCI 2.0 interface but requires vendor-specific initialization. Driver works in PIO mode as ADMA is not supported by U-Boot (yet). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>master
parent
81a87e1894
commit
9d11d12a16
@ -0,0 +1,25 @@ |
||||
Qualcomm Snapdragon SDHCI controller |
||||
|
||||
Required properties: |
||||
- compatible : "qcom,sdhci-msm-v4" |
||||
- reg: Base address and length of registers: |
||||
- Host controller registers (SDHCI) |
||||
- SD Core registers |
||||
- clock: interface clock (must accept SD bus clock as a frequency) |
||||
|
||||
Optional properties: |
||||
- index: If there is more than one controller - controller index (required |
||||
by generic SDHCI code). |
||||
- bus_width: Width of SD/eMMC bus (default 4) |
||||
- clock-frequency: Frequency of SD/eMMC bus (default 400 kHz) |
||||
|
||||
Example: |
||||
|
||||
sdhci@07864000 { |
||||
compatible = "qcom,sdhci-msm-v4"; |
||||
reg = <0x7864900 0x11c 0x7864000 0x800>; |
||||
index = <0x1>; |
||||
bus-width = <0x4>; |
||||
clock = <&clkc 1>; |
||||
clock-frequency = <200000000>; |
||||
}; |
@ -0,0 +1,180 @@ |
||||
/*
|
||||
* Qualcomm SDHCI driver - SD/eMMC controller |
||||
* |
||||
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com> |
||||
* |
||||
* Based on Linux driver |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <clk.h> |
||||
#include <dm.h> |
||||
#include <sdhci.h> |
||||
#include <wait_bit.h> |
||||
#include <asm/io.h> |
||||
#include <linux/bitops.h> |
||||
|
||||
/* Non-standard registers needed for SDHCI startup */ |
||||
#define SDCC_MCI_POWER 0x0 |
||||
#define SDCC_MCI_POWER_SW_RST BIT(7) |
||||
|
||||
/* This is undocumented register */ |
||||
#define SDCC_MCI_VERSION 0x50 |
||||
#define SDCC_MCI_VERSION_MAJOR_SHIFT 28 |
||||
#define SDCC_MCI_VERSION_MAJOR_MASK (0xf << SDCC_MCI_VERSION_MAJOR_SHIFT) |
||||
#define SDCC_MCI_VERSION_MINOR_MASK 0xff |
||||
|
||||
#define SDCC_MCI_STATUS2 0x6C |
||||
#define SDCC_MCI_STATUS2_MCI_ACT 0x1 |
||||
#define SDCC_MCI_HC_MODE 0x78 |
||||
|
||||
/* Offset to SDHCI registers */ |
||||
#define SDCC_SDHCI_OFFSET 0x900 |
||||
|
||||
/* Non standard (?) SDHCI register */ |
||||
#define SDHCI_VENDOR_SPEC_CAPABILITIES0 0x11c |
||||
|
||||
struct msm_sdhc { |
||||
struct sdhci_host host; |
||||
void *base; |
||||
}; |
||||
|
||||
DECLARE_GLOBAL_DATA_PTR; |
||||
|
||||
static int msm_sdc_clk_init(struct udevice *dev) |
||||
{ |
||||
uint clk_rate = fdtdec_get_uint(gd->fdt_blob, dev->of_offset, |
||||
"clock-frequency", 400000); |
||||
uint clkd[2]; /* clk_id and clk_no */ |
||||
int clk_offset; |
||||
struct udevice *clk; |
||||
int ret; |
||||
|
||||
ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset, "clock", clkd, |
||||
2); |
||||
if (ret) |
||||
return ret; |
||||
|
||||
clk_offset = fdt_node_offset_by_phandle(gd->fdt_blob, clkd[0]); |
||||
if (clk_offset < 0) |
||||
return clk_offset; |
||||
|
||||
ret = uclass_get_device_by_of_offset(UCLASS_CLK, clk_offset, &clk); |
||||
if (ret) |
||||
return ret; |
||||
|
||||
ret = clk_set_periph_rate(clk, clkd[1], clk_rate); |
||||
if (ret < 0) |
||||
return ret; |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
static int msm_sdc_probe(struct udevice *dev) |
||||
{ |
||||
struct msm_sdhc *prv = dev_get_priv(dev); |
||||
struct sdhci_host *host = &prv->host; |
||||
u32 core_version, core_minor, core_major; |
||||
int ret; |
||||
|
||||
host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_BROKEN_R1B; |
||||
|
||||
/* Init clocks */ |
||||
ret = msm_sdc_clk_init(dev); |
||||
if (ret) |
||||
return ret; |
||||
|
||||
/* Reset the core and Enable SDHC mode */ |
||||
writel(readl(prv->base + SDCC_MCI_POWER) | SDCC_MCI_POWER_SW_RST, |
||||
prv->base + SDCC_MCI_POWER); |
||||
|
||||
|
||||
/* Wait for reset to be written to register */ |
||||
if (wait_for_bit(__func__, prv->base + SDCC_MCI_STATUS2, |
||||
SDCC_MCI_STATUS2_MCI_ACT, false, 10, false)) { |
||||
printf("msm_sdhci: reset request failed\n"); |
||||
return -EIO; |
||||
} |
||||
|
||||
/* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */ |
||||
if (wait_for_bit(__func__, prv->base + SDCC_MCI_POWER, |
||||
SDCC_MCI_POWER_SW_RST, false, 2, false)) { |
||||
printf("msm_sdhci: stuck in reset\n"); |
||||
return -ETIMEDOUT; |
||||
} |
||||
|
||||
/* Enable host-controller mode */ |
||||
writel(1, prv->base + SDCC_MCI_HC_MODE); |
||||
|
||||
core_version = readl(prv->base + SDCC_MCI_VERSION); |
||||
|
||||
core_major = (core_version & SDCC_MCI_VERSION_MAJOR_MASK); |
||||
core_major >>= SDCC_MCI_VERSION_MAJOR_SHIFT; |
||||
|
||||
core_minor = core_version & SDCC_MCI_VERSION_MINOR_MASK; |
||||
|
||||
/*
|
||||
* Support for some capabilities is not advertised by newer |
||||
* controller versions and must be explicitly enabled. |
||||
*/ |
||||
if (core_major >= 1 && core_minor != 0x11 && core_minor != 0x12) { |
||||
u32 caps = readl(host->ioaddr + SDHCI_CAPABILITIES); |
||||
caps |= SDHCI_CAN_VDD_300 | SDHCI_CAN_DO_8BIT; |
||||
writel(caps, host->ioaddr + SDHCI_VENDOR_SPEC_CAPABILITIES0); |
||||
} |
||||
|
||||
/* Set host controller version */ |
||||
host->version = sdhci_readw(host, SDHCI_HOST_VERSION); |
||||
|
||||
/* automatically detect max and min speed */ |
||||
return add_sdhci(host, 0, 0); |
||||
} |
||||
|
||||
static int msm_sdc_remove(struct udevice *dev) |
||||
{ |
||||
struct msm_sdhc *priv = dev_get_priv(dev); |
||||
|
||||
/* Disable host-controller mode */ |
||||
writel(0, priv->base + SDCC_MCI_HC_MODE); |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
static int msm_ofdata_to_platdata(struct udevice *dev) |
||||
{ |
||||
struct udevice *parent = dev->parent; |
||||
struct msm_sdhc *priv = dev_get_priv(dev); |
||||
struct sdhci_host *host = &priv->host; |
||||
|
||||
host->name = strdup(dev->name); |
||||
host->ioaddr = (void *)dev_get_addr(dev); |
||||
host->bus_width = fdtdec_get_int(gd->fdt_blob, dev->of_offset, |
||||
"bus-width", 4); |
||||
host->index = fdtdec_get_uint(gd->fdt_blob, dev->of_offset, "index", 0); |
||||
priv->base = (void *)fdtdec_get_addr_size_auto_parent(gd->fdt_blob, |
||||
parent->of_offset, |
||||
dev->of_offset, |
||||
"reg", 1, NULL); |
||||
if (priv->base == (void *)FDT_ADDR_T_NONE || |
||||
host->ioaddr == (void *)FDT_ADDR_T_NONE) |
||||
return -EINVAL; |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
static const struct udevice_id msm_mmc_ids[] = { |
||||
{ .compatible = "qcom,sdhci-msm-v4" }, |
||||
{ } |
||||
}; |
||||
|
||||
U_BOOT_DRIVER(msm_sdc_drv) = { |
||||
.name = "msm_sdc", |
||||
.id = UCLASS_MMC, |
||||
.of_match = msm_mmc_ids, |
||||
.ofdata_to_platdata = msm_ofdata_to_platdata, |
||||
.probe = msm_sdc_probe, |
||||
.remove = msm_sdc_remove, |
||||
.priv_auto_alloc_size = sizeof(struct msm_sdhc), |
||||
}; |
Loading…
Reference in new issue