- As these boards are similiar, collect common config options in manroland/common.h and manroland/mpc52xx-common.h for mpc5200 specific common options for this manufacturer. - add OF support - update default environment Signed-off-by: Heiko Schocher <hs@denx.de> Minor edit of commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>master
Heiko Schocher
15 years ago
committed by
Tom Rix
parent
94731e41b6
commit
9e3f6f359b
@ -0,0 +1,141 @@ |
||||
/*
|
||||
* (C) Copyright 2009 |
||||
* Heiko Schocher, DENX Software Engineering, hs@denx.de. |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#ifndef __MANROLAND_COMMON_H |
||||
#define __MANROLAND_COMMON_H |
||||
|
||||
/*
|
||||
* High Level Configuration Options |
||||
* (easy to change) |
||||
*/ |
||||
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ |
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */ |
||||
|
||||
#define CONFIG_BOARD_EARLY_INIT_R |
||||
|
||||
/* Partitions */ |
||||
#define CONFIG_DOS_PARTITION |
||||
|
||||
/*
|
||||
* Command line configuration. |
||||
*/ |
||||
#include <config_cmd_default.h> |
||||
|
||||
#define CONFIG_CMD_DATE |
||||
#define CONFIG_CMD_DISPLAY |
||||
#define CONFIG_CMD_DHCP |
||||
#define CONFIG_CMD_PING |
||||
#define CONFIG_CMD_EEPROM |
||||
#define CONFIG_CMD_I2C |
||||
#define CONFIG_CMD_DTT |
||||
#define CONFIG_CMD_IDE |
||||
#define CONFIG_CMD_FAT |
||||
#define CONFIG_CMD_NFS |
||||
#define CONFIG_CMD_MII |
||||
#define CONFIG_CMD_SNTP |
||||
|
||||
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ |
||||
|
||||
/*
|
||||
* Autobooting |
||||
*/ |
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ |
||||
|
||||
#define CONFIG_PREBOOT "echo;" \ |
||||
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
|
||||
"echo" |
||||
|
||||
#undef CONFIG_BOOTARGS |
||||
|
||||
#define xstr(s) str(s) |
||||
#define str(s) #s |
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"netdev=eth0\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addwdt=setenv bootargs ${bootargs} wdt=off\0" \
|
||||
"logval=4\0" \
|
||||
"addlog=setenv bootargs ${bootargs} loglevel=${logval}\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off panic=1\0" \
|
||||
"kernel_addr=ff810000\0" \
|
||||
"fdt_addr="xstr(CONFIG_SYS_FLASH_BASE)"\0" \
|
||||
"flash_nfs=run nfsargs addip addcon addwdt addlog;" \
|
||||
"bootm ${kernel_addr} - ${fdt_addr}\0" \
|
||||
"rootpath=/opt/eldk/ppc_82xx\0" \
|
||||
"kernel_addr_r=300000\0" \
|
||||
"fdt_addr_r=200000\0" \
|
||||
"fdt_file=" xstr(CONFIG_HOSTNAME) "/" \
|
||||
xstr(CONFIG_HOSTNAME) ".dtb\0" \
|
||||
"kernel_file=" xstr(CONFIG_HOSTNAME) "/uImage \0" \
|
||||
"load_fdt=tftp ${fdt_addr_r} ${fdt_file};\0" \
|
||||
"load_kernel=tftp ${kernel_addr_r} ${kernel_file};\0" \
|
||||
"addcon=setenv bootargs ${bootargs} console=ttyPSC0,${baudrate}\0"\
|
||||
"net_nfs=run load_fdt load_kernel; " \
|
||||
"run nfsargs addip addcon addwdt addlog;" \
|
||||
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
||||
"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \
|
||||
"u-boot_addr_r=200000\0" \
|
||||
"load=tftp ${u-boot_addr_r} ${u-boot}\0" \
|
||||
"update=protect off " xstr(TEXT_BASE) " +${filesize};" \
|
||||
"erase " xstr(TEXT_BASE) " +${filesize};" \
|
||||
"cp.b ${u-boot_addr_r} " xstr(TEXT_BASE) \
|
||||
" ${filesize};" \
|
||||
"protect on " xstr(TEXT_BASE) " +${filesize}\0" \
|
||||
"" |
||||
|
||||
#define CONFIG_BOOTCOMMAND "run net_nfs" |
||||
|
||||
#define CONFIG_MISC_INIT_R 1 |
||||
|
||||
/*
|
||||
* Miscellaneous configurable options |
||||
*/ |
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */ |
||||
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
||||
#if defined(CONFIG_CMD_KGDB) |
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
||||
#else |
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
||||
#endif |
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) |
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ |
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
||||
|
||||
/* Enable an alternate, more extensive memory test */ |
||||
#define CONFIG_SYS_ALT_MEMTEST |
||||
|
||||
/*
|
||||
* Enable loopw command. |
||||
*/ |
||||
#define CONFIG_LOOPW |
||||
|
||||
/* pass open firmware flat tree */ |
||||
#define CONFIG_OF_LIBFDT 1 |
||||
#define CONFIG_OF_BOARD_SETUP 1 |
||||
|
||||
#endif /* __MANROLAND_COMMON_H */ |
||||
@ -0,0 +1,229 @@ |
||||
/*
|
||||
* (C) Copyright 2009 |
||||
* Heiko Schocher, DENX Software Engineering, hs@denx.de. |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
#ifndef __MANROLAND_MPC52XX__COMMON_H |
||||
#define __MANROLAND_MPC52XX__COMMON_H |
||||
|
||||
/*
|
||||
* High Level Configuration Options |
||||
* (easy to change) |
||||
*/ |
||||
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ |
||||
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ |
||||
|
||||
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ |
||||
|
||||
#define CONFIG_HIGH_BATS 1 /* High BATs supported */ |
||||
|
||||
/*
|
||||
* Serial console configuration |
||||
*/ |
||||
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ |
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200,\ |
||||
230400 } |
||||
|
||||
#if (TEXT_BASE == 0xFFF00000) /* Boot low */ |
||||
# define CONFIG_SYS_LOWBOOT 1 |
||||
#endif |
||||
|
||||
/*
|
||||
* IPB Bus clocking configuration. |
||||
*/ |
||||
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ |
||||
|
||||
/*
|
||||
* I2C configuration |
||||
*/ |
||||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ |
||||
#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ |
||||
|
||||
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ |
||||
#define CONFIG_SYS_I2C_SLAVE 0x7F |
||||
|
||||
/*
|
||||
* EEPROM configuration |
||||
*/ |
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 |
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 |
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 |
||||
|
||||
/*
|
||||
* RTC configuration |
||||
*/ |
||||
#define CONFIG_RTC_PCF8563 |
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x51 |
||||
|
||||
/* I2C SYSMON (LM75) */ |
||||
#define CONFIG_DTT_LM81 1 /* ON Semi's LM75 */ |
||||
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ |
||||
#define CONFIG_SYS_DTT_MAX_TEMP 70 |
||||
#define CONFIG_SYS_DTT_LOW_TEMP -30 |
||||
#define CONFIG_SYS_DTT_HYSTERESIS 3 |
||||
|
||||
/*
|
||||
* Flash configuration |
||||
*/ |
||||
#define CONFIG_SYS_FLASH_BASE 0xFF800000 |
||||
|
||||
#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */ |
||||
|
||||
#define CONFIG_ENV_ADDR (TEXT_BASE+0x40000) /* second sector */ |
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks |
||||
(= chip selects) */ |
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout [ms]*/ |
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout [ms]*/ |
||||
|
||||
#define CONFIG_FLASH_CFI_DRIVER |
||||
#define CONFIG_SYS_FLASH_CFI |
||||
#define CONFIG_SYS_FLASH_EMPTY_INFO |
||||
#define CONFIG_SYS_FLASH_CFI_AMD_RESET |
||||
|
||||
/*
|
||||
* Environment settings |
||||
*/ |
||||
#define CONFIG_ENV_IS_IN_FLASH 1 |
||||
#define CONFIG_ENV_SIZE 0x4000 |
||||
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) |
||||
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) |
||||
|
||||
/*
|
||||
* Memory map |
||||
*/ |
||||
#define CONFIG_SYS_MBAR 0xF0000000 |
||||
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 |
||||
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128 |
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END -\ |
||||
CONFIG_SYS_GBL_DATA_SIZE) |
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 |
||||
#define CONFIG_SYS_SRAM_BASE 0x80100000 /* CS 1 */ |
||||
#define CONFIG_SYS_DISPLAY_BASE 0x80600000 /* CS 3 */ |
||||
|
||||
/* Settings for XLB = 132 MHz */ |
||||
#define SDRAM_DDR 1 |
||||
#define SDRAM_MODE 0x018D0000 |
||||
#define SDRAM_EMODE 0x40090000 |
||||
#define SDRAM_CONTROL 0x714f0f00 |
||||
#define SDRAM_CONFIG1 0x73722930 |
||||
#define SDRAM_CONFIG2 0x47770000 |
||||
#define SDRAM_TAPDELAY 0x10000000 |
||||
|
||||
/* Use ON-Chip SRAM until RAM will be available */ |
||||
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM |
||||
#ifdef CONFIG_POST |
||||
/* preserve space for the post_word at end of on-chip SRAM */ |
||||
#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE |
||||
#else |
||||
#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE |
||||
#endif |
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE |
||||
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) |
||||
# define CONFIG_SYS_RAMBOOT 1 |
||||
#endif |
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (192 << 10) |
||||
#define CONFIG_SYS_MALLOC_LEN (512 << 10) |
||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) |
||||
|
||||
/*
|
||||
* Ethernet configuration |
||||
*/ |
||||
#define CONFIG_MPC5xxx_FEC 1 |
||||
#define CONFIG_MPC5xxx_FEC_MII100 |
||||
#define CONFIG_PHY_ADDR 0x00 |
||||
#define CONFIG_MII 1 |
||||
|
||||
/*use Hardware WDT */ |
||||
#define CONFIG_HW_WATCHDOG |
||||
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ |
||||
|
||||
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ |
||||
#if defined(CONFIG_CMD_KGDB) |
||||
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ |
||||
#endif |
||||
|
||||
/*
|
||||
* Various low-level settings |
||||
*/ |
||||
#if defined(CONFIG_MPC5200) |
||||
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI |
||||
#define CONFIG_SYS_HID0_FINAL HID0_ICE |
||||
#else |
||||
#define CONFIG_SYS_HID0_INIT 0 |
||||
#define CONFIG_SYS_HID0_FINAL 0 |
||||
#endif |
||||
|
||||
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE |
||||
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE |
||||
#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE |
||||
#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE |
||||
|
||||
/* 8Mbit SRAM @0x80100000 */ |
||||
#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE |
||||
|
||||
#define CONFIG_SYS_CS_BURST 0x00000000 |
||||
#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* IDE/ATA stuff Supports IDE harddisk |
||||
*----------------------------------------------------------------------- |
||||
*/ |
||||
|
||||
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ |
||||
|
||||
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ |
||||
#undef CONFIG_IDE_LED /* LED for ide not supported */ |
||||
|
||||
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ |
||||
|
||||
#define CONFIG_IDE_PREINIT 1 |
||||
|
||||
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 |
||||
|
||||
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA |
||||
|
||||
/* Offset for data I/O */ |
||||
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) |
||||
|
||||
/* Offset for normal register accesses */ |
||||
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) |
||||
|
||||
/* Offset for alternate registers */ |
||||
#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) |
||||
|
||||
/* Interval between registers */ |
||||
#define CONFIG_SYS_ATA_STRIDE 4 |
||||
|
||||
#define CONFIG_ATAPI 1 |
||||
|
||||
#define OF_CPU "PowerPC,5200@0" |
||||
#define OF_SOC "soc5200@f0000000" |
||||
#define OF_TBCLK (bd->bi_busfreq / 4) |
||||
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" |
||||
|
||||
#endif /* __MANROLAND_MPC52XX__COMMON_H */ |
||||
Loading…
Reference in new issue