Merge branch 'master' of git://git.denx.de/u-boot-arm

MAINTAINERS

@@ -655,6 +655,9 @@ Sergey Lapin <slapin@ossfans.org>
 
 	afeb9260	ARM926EJS (AT91SAM9260 SoC)
 
+Wolfgang Denk <wd@denx.de>
+	qong		i.MX31
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:

MAKEALL

@@ -544,6 +544,7 @@ LIST_ARM11="		\
 	imx31_litekit	\
 	imx31_phycore	\
 	mx31ads		\
+	qong		\
 	smdk6400	\
 "
 

Makefile

@@ -3038,6 +3038,10 @@ mx31ads_config		: unconfig
 omap2420h4_config	: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
 
+qong_config		: unconfig
+	@$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
+
+
 #########################################################################
 ## ARM1176 Systems
 #########################################################################

board/davedenx/qong/Makefile

@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2009
+# Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= qong.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/davedenx/qong/config.mk

@@ -0,0 +1 @@
+TEXT_BASE = 0x8ff00000

board/davedenx/qong/lowlevel_init.S

@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) 2009, Emcraft Systems, Ilya Yanok <yanok@emcraft.com>
+ *
+ * Based on board/freescale/mx31ads/lowlevel_init.S
+ * by Guennadi Liakhovetski.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/mx31-regs.h>
+
+.macro REG reg, val
+	ldr r2, =\reg
+	ldr r3, =\val
+	str r3, [r2]
+.endm
+
+.macro REG8 reg, val
+	ldr r2, =\reg
+	ldr r3, =\val
+	strb r3, [r2]
+.endm
+
+.macro DELAY loops
+	ldr r2, =\loops
+1:
+	subs	r2, r2, #1
+	nop
+	bcs 1b
+.endm
+
+/* RedBoot: To support 133MHz DDR */
+.macro init_drive_strength
+	/*
+	 * Disable maximum drive strength SDRAM/DDR lines by clearing DSE1 bits
+	 * in SW_PAD_CTL registers
+	 */
+
+	/* SDCLK */
+	ldr r1, =IOMUXC_SW_PAD_CTL(0x2b)
+	ldr r0, [r1, #0x6C]
+	bic r0, r0, #(1 << 12)
+	str r0, [r1, #0x6C]
+
+	/* CAS */
+	ldr r0, [r1, #0x70]
+	bic r0, r0, #(1 << 22)
+	str r0, [r1, #0x70]
+
+	/* RAS */
+	ldr r0, [r1, #0x74]
+	bic r0, r0, #(1 << 2)
+	str r0, [r1, #0x74]
+
+	/* CS2 (CSD0) */
+	ldr r0, [r1, #0x7C]
+	bic r0, r0, #(1 << 22)
+	str r0, [r1, #0x7C]
+
+	/* DQM3 */
+	ldr r0, [r1, #0x84]
+	bic r0, r0, #(1 << 22)
+	str r0, [r1, #0x84]
+
+	/* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */
+	ldr r2, =22	/* (0x2E0 - 0x288) / 4 = 22 */
+pad_loop:
+	ldr r0, [r1, #0x88]
+	bic r0, r0, #(1 << 22)
+	bic r0, r0, #(1 << 12)
+	bic r0, r0, #(1 << 2)
+	str r0, [r1, #0x88]
+	add r1, r1, #4
+	subs r2, r2, #0x1
+	bne pad_loop
+.endm /* init_drive_strength */
+
+.globl lowlevel_init
+lowlevel_init:
+
+	init_drive_strength
+
+	/* Image Processing Unit: */
+	/* Too early to switch display on? */
+	/* Switch on Display Interface */
+	REG	IPU_CONF, IPU_CONF_DI_EN
+	/* Clock Control Module: */
+	REG	CCM_CCMR, 0x074B0BF5		/* Use CKIH, MCU PLL off */
+
+	DELAY 0x40000
+
+	REG	CCM_CCMR, 0x074B0BF5 | CCMR_MPE			/* MCU PLL on */
+	/* Switch to MCU PLL */
+	REG	CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
+
+	/* 399-133-66.5 */
+	ldr	r0, =CCM_BASE
+	ldr	r1, =0xFF871650
+	/* PDR0 */
+	str	r1, [r0, #0x4]
+	ldr	r1, MPCTL_PARAM_399
+	/* MPCTL */
+	str	r1, [r0, #0x10]
+
+	/* Set UPLL=240MHz, USB=60MHz */
+	ldr	r1, =0x49FCFE7F
+	/* PDR1 */
+	str	r1, [r0, #0x8]
+	ldr	r1, UPCTL_PARAM_240
+	/* UPCTL */
+	str	r1, [r0, #0x14]
+	/* default CLKO to 1/8 of the ARM core */
+	mov	r1, #0x00000208
+	/* COSR */
+	str	r1, [r0, #0x1c]
+
+	/* Default: 1, 4, 12, 1 */
+	REG	CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
+
+	/* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */
+	REG	0xB8001010, 0x00000004
+	REG	0xB8001004, ((3 << 21) | /* tXP */	\
+			     (0 << 20) | /* tWTR */	\
+			     (2 << 18) | /* tRP */	\
+			     (1 << 16) | /* tMRD */	\
+			     (0 << 15) | /* tWR */	\
+			     (5 << 12) | /* tRAS */	\
+			     (1 << 10) | /* tRRD */	\
+			     (3 << 8)  | /* tCAS */	\
+			     (2 << 4)  | /* tRCD */	\
+			     (7 << 0)    /* tRC */ )
+	REG	0xB8001000, 0x92100000
+	REG	0x80000f00, 0x12344321
+	REG	0xB8001000, 0xa2100000
+	REG	0x80000000, 0x12344321
+	REG	0x80000000, 0x12344321
+	REG	0xB8001000, 0xb2100000
+	REG8	0x80000033, 0xda
+	REG8	0x81000000, 0xff
+	REG	0xB8001000, ((1 << 31) |				\
+			     (0 << 28) |				\
+			     (0 << 27) |				\
+			     (3 << 24) | /* 14 rows */			\
+			     (2 << 20) | /* 10 cols */			\
+			     (2 << 16) |				\
+			     (4 << 13) | /* 3.91us (64ms/16384) */	\
+			     (0 << 10) |				\
+			     (0 << 8)  |				\
+			     (1 << 7)  |				\
+			     (0 << 0))
+	REG	0x80000000, 0xDEADBEEF
+	REG	0xB8001010, 0x0000000c
+
+	mov	pc, lr
+
+MPCTL_PARAM_399:
+	.word (((1 - 1) << 26) + ((52 - 1) << 16) + (7 << 10) + (35 << 0))
+UPCTL_PARAM_240:
+	.word (((2 - 1) << 26) + ((13 - 1) << 16) + (9 << 10) + (3  << 0))

board/davedenx/qong/qong.c

@@ -0,0 +1,168 @@
+/*
+ *
+ * (c) 2009 Emcraft Systems, Ilya Yanok <yanok@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+#include "qong_fpga.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init (void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = get_ram_size((volatile void *)PHYS_SDRAM_1,
+			PHYS_SDRAM_1_SIZE);
+
+	return 0;
+}
+
+int board_init (void)
+{
+	/* Chip selects */
+	/* CS0: Nor Flash #0 - it must be init'ed when executing from DDR */
+	/* Assumptions: HCLK = 133 MHz, tACC = 130ns */
+	__REG(CSCR_U(0)) = ((0 << 31)	| /* SP */
+						(0 << 30)	| /* WP */
+						(0 << 28)	| /* BCD */
+						(0 << 24)	| /* BCS */
+						(0 << 22)	| /* PSZ */
+						(0 << 21)	| /* PME */
+						(0 << 20)	| /* SYNC */
+						(0 << 16)	| /* DOL */
+						(3 << 14)	| /* CNC */
+						(21 << 8)	| /* WSC */
+						(0 << 7)	| /* EW */
+						(0 << 4)	| /* WWS */
+						(6 << 0)	  /* EDC */
+					   );
+
+	__REG(CSCR_L(0)) = ((2 << 28)	| /* OEA */
+						(1 << 24)	| /* OEN */
+						(3 << 20)	| /* EBWA */
+						(3 << 16)	| /* EBWN */
+						(1 << 12)	| /* CSA */
+						(1 << 11)	| /* EBC */
+						(5 << 8)	| /* DSZ */
+						(1 << 4)	| /* CSN */
+						(0 << 3)	| /* PSR */
+						(0 << 2)	| /* CRE */
+						(0 << 1)	| /* WRAP */
+						(1 << 0)	  /* CSEN */
+					   );
+
+	__REG(CSCR_A(0)) = ((2 << 28)	| /* EBRA */
+						(1 << 24)	| /* EBRN */
+						(2 << 20)	| /* RWA */
+						(2 << 16)	| /* RWN */
+						(0 << 15)	| /* MUM */
+						(0 << 13)	| /* LAH */
+						(2 << 10)	| /* LBN */
+						(0 << 8)	| /* LBA */
+						(0 << 6)	| /* DWW */
+						(0 << 4)	| /* DCT */
+						(0 << 3)	| /* WWU */
+						(0 << 2)	| /* AGE */
+						(0 << 1)	| /* CNC2 */
+						(0 << 0)	  /* FCE */
+					   );
+
+#ifdef CONFIG_QONG_FPGA
+	/* CS1: FPGA/Network Controller/GPIO */
+	/* 16-bit, no DTACK */
+	__REG(CSCR_U(1)) = 0x00000A01;
+	__REG(CSCR_L(1)) = 0x20040501;
+	__REG(CSCR_A(1)) = 0x04020C00;
+
+	/* setup pins for FPGA */
+	mx31_gpio_mux(IOMUX_MODE(0x76, MUX_CTL_GPIO));
+	mx31_gpio_mux(IOMUX_MODE(0x7e, MUX_CTL_GPIO));
+	mx31_gpio_mux(IOMUX_MODE(0x91, MUX_CTL_OUT_FUNC | MUX_CTL_IN_GPIO));
+	mx31_gpio_mux(IOMUX_MODE(0x92, MUX_CTL_GPIO));
+	mx31_gpio_mux(IOMUX_MODE(0x93, MUX_CTL_GPIO));
+#endif
+
+	/* setup pins for UART1 */
+	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
+	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
+	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
+	mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
+
+	/* board id for linux */
+	gd->bd->bi_arch_number = MACH_TYPE_QONG;
+	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */
+
+	return 0;
+}
+
+int checkboard (void)
+{
+	printf("Board: DAVE/DENX QongEVB-LITE\n");
+	return 0;
+}
+
+int misc_init_r (void)
+{
+#ifdef CONFIG_QONG_FPGA
+	u32 tmp;
+
+	/* FPGA reset */
+	/* rstn = 0 */
+	tmp = __REG(GPIO2_BASE + GPIO_DR);
+	tmp &= (~(1 << QONG_FPGA_RST_PIN));
+	__REG(GPIO2_BASE + GPIO_DR) = tmp;
+	/* set the GPIO as output */
+	tmp = __REG(GPIO2_BASE + GPIO_GDIR);
+	tmp |= (1 << QONG_FPGA_RST_PIN);
+	__REG(GPIO2_BASE + GPIO_GDIR) = tmp;
+	/* wait */
+	udelay(30);
+	/* rstn = 1 */
+	tmp = __REG(GPIO2_BASE + GPIO_DR);
+	tmp |= (1 << QONG_FPGA_RST_PIN);
+	__REG(GPIO2_BASE + GPIO_DR) = tmp;
+	/* set interrupt pin as input */
+	__REG(GPIO2_BASE + GPIO_GDIR) = tmp | (1 << QONG_FPGA_IRQ_PIN);
+	/* wait while the FPGA starts */
+	udelay(300);
+
+	tmp = *(volatile u32*)QONG_FPGA_CTRL_VERSION;
+	printf("FPGA:  ");
+	printf("version register = %u.%u.%u\n",
+		(tmp & 0xF000) >> 12, (tmp & 0x0F00) >> 8, tmp & 0x00FF);
+#endif
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_DNET)
+	return dnet_eth_initialize(0, (void *)CONFIG_DNET_BASE, -1);
+#else
+	return 0;
+#endif
+}
+

board/davedenx/qong/qong_fpga.h

@@ -0,0 +1,41 @@
+/*
+ *
+ * (c) 2009 Emcraft Systems, Ilya Yanok <yanok@emcraft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef QONG_FPGA_H
+#define QONG_FPGA_H
+
+#ifdef CONFIG_QONG_FPGA
+#define QONG_FPGA_CTRL_BASE		CONFIG_FPGA_BASE
+#define QONG_FPGA_CTRL_VERSION		(QONG_FPGA_CTRL_BASE + 0x00000000)
+#define QONG_FPGA_PERIPH_SIZE		(1 << 24)
+
+#define	QONG_FPGA_TCK_PIN		26
+#define	QONG_FPGA_TMS_PIN		25
+#define	QONG_FPGA_TDI_PIN		8
+#define	QONG_FPGA_TDO_PIN		7
+#define	QONG_FPGA_RST_PIN		16
+#define	QONG_FPGA_IRQ_PIN		8
+#endif
+
+#endif /* QONG_FPGA_H */
+

board/davedenx/qong/u-boot.lds

@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2009
+ * Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		cpu/arm1136/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}

drivers/net/Makefile

@@ -33,6 +33,7 @@ COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
 COBJS-$(CONFIG_DRIVER_CS8900) += cs8900.o
 COBJS-$(CONFIG_TULIP) += dc2114x.o
 COBJS-$(CONFIG_DRIVER_DM9000) += dm9000x.o
+COBJS-$(CONFIG_DNET) += dnet.o
 COBJS-$(CONFIG_E1000) += e1000.o
 COBJS-$(CONFIG_EEPRO100) += eepro100.o
 COBJS-$(CONFIG_ENC28J60) += enc28j60.o

drivers/net/dnet.c

@@ -0,0 +1,396 @@
+/*
+ * Dave Ethernet Controller driver
+ *
+ * Copyright (C) 2008 Dave S.r.l. <www.dave.eu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+
+#ifndef CONFIG_DNET_AUTONEG_TIMEOUT
+#define CONFIG_DNET_AUTONEG_TIMEOUT	5000000	/* default value */
+#endif
+
+#include <net.h>
+#include <malloc.h>
+#include <linux/mii.h>
+
+#include <miiphy.h>
+#include <asm/io.h>
+
+#include "dnet.h"
+
+struct dnet_device {
+	struct dnet_registers	*regs;
+	const struct device	*dev;
+	struct eth_device	netdev;
+	unsigned short		phy_addr;
+};
+
+/* get struct dnet_device from given struct netdev */
+#define to_dnet(_nd) container_of(_nd, struct dnet_device, netdev)
+
+/* function for reading internal MAC register */
+u16 dnet_readw_mac(struct dnet_device *dnet, u16 reg)
+{
+	u16 data_read;
+
+	/* issue a read */
+	writel(reg, &dnet->regs->MACREG_ADDR);
+
+	/* since a read/write op to the MAC is very slow,
+	 * we must wait before reading the data */
+	udelay(1);
+
+	/* read data read from the MAC register */
+	data_read = readl(&dnet->regs->MACREG_DATA);
+
+	/* all done */
+	return data_read;
+}
+
+/* function for writing internal MAC register */
+void dnet_writew_mac(struct dnet_device *dnet, u16 reg, u16 val)
+{
+	/* load data to write */
+	writel(val, &dnet->regs->MACREG_DATA);
+
+	/* issue a write */
+	writel(reg | DNET_INTERNAL_WRITE, &dnet->regs->MACREG_ADDR);
+
+	/* since a read/write op to the MAC is very slow,
+	 * we must wait before exiting */
+	udelay(1);
+}
+
+static void dnet_mdio_write(struct dnet_device *dnet, u8 reg, u16 value)
+{
+	u16 tmp;
+
+	debug(DRIVERNAME "dnet_mdio_write %02x:%02x <- %04x\n",
+			dnet->phy_addr, reg, value);
+
+	while (!(dnet_readw_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG) &
+				DNET_INTERNAL_GMII_MNG_CMD_FIN))
+		;
+
+	/* prepare for a write operation */
+	tmp = (1 << 13);
+
+	/* only 5 bits allowed for register offset */
+	reg &= 0x1f;
+
+	/* prepare reg_value for a write */
+	tmp |= (dnet->phy_addr << 8);
+	tmp |= reg;
+
+	/* write data to write first */
+	dnet_writew_mac(dnet, DNET_INTERNAL_GMII_MNG_DAT_REG, value);
+
+	/* write control word */
+	dnet_writew_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG, tmp);
+
+	while (!(dnet_readw_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG) &
+				DNET_INTERNAL_GMII_MNG_CMD_FIN))
+		;
+}
+
+static u16 dnet_mdio_read(struct dnet_device *dnet, u8 reg)
+{
+	u16 value;
+
+	while (!(dnet_readw_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG) &
+				DNET_INTERNAL_GMII_MNG_CMD_FIN))
+		;
+
+	/* only 5 bits allowed for register offset*/
+	reg &= 0x1f;
+
+	/* prepare reg_value for a read */
+	value = (dnet->phy_addr << 8);
+	value |= reg;
+
+	/* write control word */
+	dnet_writew_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG, value);
+
+	/* wait for end of transfer */
+	while (!(dnet_readw_mac(dnet, DNET_INTERNAL_GMII_MNG_CTL_REG) &
+				DNET_INTERNAL_GMII_MNG_CMD_FIN))
+		;
+
+	value = dnet_readw_mac(dnet, DNET_INTERNAL_GMII_MNG_DAT_REG);
+
+	debug(DRIVERNAME "dnet_mdio_read %02x:%02x <- %04x\n",
+		dnet->phy_addr, reg, value);
+
+	return value;
+}
+
+static int dnet_send(struct eth_device *netdev, volatile void *packet,
+		     int length)
+{
+	struct dnet_device *dnet = to_dnet(netdev);
+	int i, len, wrsz;
+	unsigned int *bufp;
+	unsigned int tx_cmd;
+
+	debug(DRIVERNAME "[%s] Sending %u bytes\n", __func__, length);
+
+	/* frame size (words) */
+	len = (length + 3) >> 2;
+
+	bufp = (unsigned int *) (((u32)packet) & 0xFFFFFFFC);
+	wrsz = (u32)length + 3;
+	wrsz += ((u32)packet) & 0x3;
+	wrsz >>= 2;
+	tx_cmd = ((((unsigned int)(packet)) & 0x03) << 16) | (u32)length;
+
+	/* check if there is enough room for the current frame */
+	if (wrsz < (DNET_FIFO_SIZE - readl(&dnet->regs->TX_FIFO_WCNT))) {
+		for (i = 0; i < wrsz; i++)
+			writel(*bufp++, &dnet->regs->TX_DATA_FIFO);
+		/*
+		 * inform MAC that a packet's written and ready
+		 * to be shipped out
+		 */
+		writel(tx_cmd, &dnet->regs->TX_LEN_FIFO);
+	} else {
+		printf(DRIVERNAME "No free space (actual %d, required %d "
+				"(words))\n", DNET_FIFO_SIZE -
+				readl(&dnet->regs->TX_FIFO_WCNT), wrsz);
+	}
+
+	/* No one cares anyway */
+	return 0;
+}
+
+
+static int dnet_recv(struct eth_device *netdev)
+{
+	struct dnet_device *dnet = to_dnet(netdev);
+	unsigned int *data_ptr;
+	int pkt_len, poll, i;
+	u32 cmd_word;
+
+	debug("Waiting for pkt (polling)\n");
+	poll = 50;
+	while ((readl(&dnet->regs->RX_FIFO_WCNT) >> 16) == 0) {
+		udelay(10);  /* wait 10 usec */
+		if (--poll == 0)
+			return 0;	/* no pkt available */
+	}
+
+	cmd_word = readl(&dnet->regs->RX_LEN_FIFO);
+	pkt_len = cmd_word & 0xFFFF;
+
+	debug("Got pkt with size %d bytes\n", pkt_len);
+
+	if (cmd_word & 0xDF180000)
+		printf("%s packet receive error %x\n", __func__, cmd_word);
+
+	data_ptr = (unsigned int *) NetRxPackets[0];
+
+	for (i = 0; i < (pkt_len + 3) >> 2; i++)
+		*data_ptr++ = readl(&dnet->regs->RX_DATA_FIFO);
+
+	NetReceive(NetRxPackets[0], pkt_len + 5); /* ok + 5 ?? */
+
+	return 0;
+}
+
+static void dnet_set_hwaddr(struct eth_device *netdev)
+{
+	struct dnet_device *dnet = to_dnet(netdev);
+	u16 tmp;
+
+	tmp = cpu_to_be16(*((u16 *)netdev->enetaddr));
+	dnet_writew_mac(dnet, DNET_INTERNAL_MAC_ADDR_0_REG, tmp);
+	tmp = cpu_to_be16(*((u16 *)(netdev->enetaddr + 2)));
+	dnet_writew_mac(dnet, DNET_INTERNAL_MAC_ADDR_1_REG, tmp);
+	tmp = cpu_to_be16(*((u16 *)(netdev->enetaddr + 4)));
+	dnet_writew_mac(dnet, DNET_INTERNAL_MAC_ADDR_2_REG, tmp);
+}
+
+static void dnet_phy_reset(struct dnet_device *dnet)
+{
+	struct eth_device *netdev = &dnet->netdev;
+	int i;
+	u16 status, adv;
+
+	adv = ADVERTISE_CSMA | ADVERTISE_ALL;
+	dnet_mdio_write(dnet, MII_ADVERTISE, adv);
+	printf("%s: Starting autonegotiation...\n", netdev->name);
+	dnet_mdio_write(dnet, MII_BMCR, (BMCR_ANENABLE
+					 | BMCR_ANRESTART));
+
+	for (i = 0; i < CONFIG_DNET_AUTONEG_TIMEOUT / 100; i++) {
+		status = dnet_mdio_read(dnet, MII_BMSR);
+		if (status & BMSR_ANEGCOMPLETE)
+			break;
+		udelay(100);
+	}
+
+	if (status & BMSR_ANEGCOMPLETE)
+		printf("%s: Autonegotiation complete\n", netdev->name);
+	else
+		printf("%s: Autonegotiation timed out (status=0x%04x)\n",
+		       netdev->name, status);
+}
+
+static int dnet_phy_init(struct dnet_device *dnet)
+{
+	struct eth_device *netdev = &dnet->netdev;
+	u16 phy_id, status, adv, lpa;
+	int media, speed, duplex;
+	int i;
+	u32 ctl_reg;
+
+	/* Find a PHY */
+	for (i = 0; i < 32; i++) {
+		dnet->phy_addr = i;
+		phy_id = dnet_mdio_read(dnet, MII_PHYSID1);
+		if (phy_id != 0xffff) {
+			/* ok we found it */
+			printf("Found PHY at address %d PHYID (%04x:%04x)\n",
+					i, phy_id,
+					dnet_mdio_read(dnet, MII_PHYSID2));
+			break;
+		}
+	}
+
+	/* Check if the PHY is up to snuff... */
+	phy_id = dnet_mdio_read(dnet, MII_PHYSID1);
+	if (phy_id == 0xffff) {
+		printf("%s: No PHY present\n", netdev->name);
+		return -1;
+	}
+
+	status = dnet_mdio_read(dnet, MII_BMSR);
+	if (!(status & BMSR_LSTATUS)) {
+		/* Try to re-negotiate if we don't have link already. */
+		dnet_phy_reset(dnet);
+
+		for (i = 0; i < CONFIG_DNET_AUTONEG_TIMEOUT / 100; i++) {
+			status = dnet_mdio_read(dnet, MII_BMSR);
+			if (status & BMSR_LSTATUS)
+				break;
+			udelay(100);
+		}
+	}
+
+	if (!(status & BMSR_LSTATUS)) {
+		printf("%s: link down (status: 0x%04x)\n",
+		       netdev->name, status);
+		return -1;
+	} else {
+		adv = dnet_mdio_read(dnet, MII_ADVERTISE);
+		lpa = dnet_mdio_read(dnet, MII_LPA);
+		media = mii_nway_result(lpa & adv);
+		speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
+			 ? 1 : 0);
+		duplex = (media & ADVERTISE_FULL) ? 1 : 0;
+		/* 1000BaseT ethernet is not supported */
+		printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
+		       netdev->name,
+		       speed ? "100" : "10",
+		       duplex ? "full" : "half",
+		       lpa);
+
+		ctl_reg = dnet_readw_mac(dnet, DNET_INTERNAL_RXTX_CONTROL_REG);
+
+		if (duplex)
+			ctl_reg &= ~(DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP);
+		else
+			ctl_reg |= DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP;
+
+		dnet_writew_mac(dnet, DNET_INTERNAL_RXTX_CONTROL_REG, ctl_reg);
+
+		return 0;
+	}
+}
+
+static int dnet_init(struct eth_device *netdev, bd_t *bd)
+{
+	struct dnet_device *dnet = to_dnet(netdev);
+	u32 config;
+
+	/*
+	 * dnet_halt should have been called at some point before now,
+	 * so we'll assume the controller is idle.
+	 */
+
+	/* set hardware address */
+	dnet_set_hwaddr(netdev);
+
+	if (dnet_phy_init(dnet) < 0)
+		return -1;
+
+	/* flush rx/tx fifos */
+	writel(DNET_SYS_CTL_RXFIFOFLUSH | DNET_SYS_CTL_TXFIFOFLUSH,
+			&dnet->regs->SYS_CTL);
+	udelay(1000);
+	writel(0, &dnet->regs->SYS_CTL);
+
+	config = dnet_readw_mac(dnet, DNET_INTERNAL_RXTX_CONTROL_REG);
+
+	config |= DNET_INTERNAL_RXTX_CONTROL_RXPAUSE |
+			DNET_INTERNAL_RXTX_CONTROL_RXBROADCAST |
+			DNET_INTERNAL_RXTX_CONTROL_DROPCONTROL |
+			DNET_INTERNAL_RXTX_CONTROL_DISCFXFCS;
+
+	dnet_writew_mac(dnet, DNET_INTERNAL_RXTX_CONTROL_REG, config);
+
+	/* Enable TX and RX */
+	dnet_writew_mac(dnet, DNET_INTERNAL_MODE_REG,
+			DNET_INTERNAL_MODE_RXEN | DNET_INTERNAL_MODE_TXEN);
+
+	return 0;
+}
+
+static void dnet_halt(struct eth_device *netdev)
+{
+	struct dnet_device *dnet = to_dnet(netdev);
+
+	/* Disable TX and RX */
+	dnet_writew_mac(dnet, DNET_INTERNAL_MODE_REG, 0);
+}
+
+int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr)
+{
+	struct dnet_device *dnet;
+	struct eth_device *netdev;
+	unsigned int dev_capa;
+
+	dnet = malloc(sizeof(struct dnet_device));
+	if (!dnet) {
+		printf("Error: Failed to allocate memory for DNET%d\n", id);
+		return -1;
+	}
+	memset(dnet, 0, sizeof(struct dnet_device));
+
+	netdev = &dnet->netdev;
+
+	dnet->regs = (struct dnet_registers *)regs;
+	dnet->phy_addr = phy_addr;
+
+	sprintf(netdev->name, "dnet%d", id);
+	netdev->init = dnet_init;
+	netdev->halt = dnet_halt;
+	netdev->send = dnet_send;
+	netdev->recv = dnet_recv;
+
+	dev_capa = readl(&dnet->regs->VERCAPS) & 0xFFFF;
+	debug("%s: has %smdio, %sirq, %sgigabit, %sdma \n", netdev->name,
+		(dev_capa & DNET_HAS_MDIO) ? "" : "no ",
+		(dev_capa & DNET_HAS_IRQ) ? "" : "no ",
+		(dev_capa & DNET_HAS_GIGABIT) ? "" : "no ",
+		(dev_capa & DNET_HAS_DMA) ? "" : "no ");
+
+	eth_register(netdev);
+
+	return 0;
+}
+

drivers/net/dnet.h

@@ -0,0 +1,166 @@
+/*
+ * Dave Ethernet Controller driver
+ *
+ * Copyright (C) 2008 Dave S.r.l. <www.dave.eu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVERS_DNET_H__
+#define __DRIVERS_DNET_H__
+
+#define DRIVERNAME "dnet"
+
+struct dnet_registers {
+	/* ALL DNET FIFO REGISTERS */
+	u32 RX_LEN_FIFO;
+	u32 RX_DATA_FIFO;
+	u32 TX_LEN_FIFO;
+	u32 TX_DATA_FIFO;
+	u32 pad1[0x3c];
+	/* ALL DNET CONTROL/STATUS REGISTERS */
+	u32 VERCAPS;
+	u32 INTR_SRC;
+	u32 INTR_ENB;
+	u32 RX_STATUS;
+	u32 TX_STATUS;
+	u32 RX_FRAMES_CNT;
+	u32 TX_FRAMES_CNT;
+	u32 RX_FIFO_TH;
+	u32 TX_FIFO_TH;
+	u32 SYS_CTL;
+	u32 PAUSE_TMR;
+	u32 RX_FIFO_WCNT;
+	u32 TX_FIFO_WCNT;
+	u32 pad2[0x33];
+	/* ALL DNET MAC REGISTERS */
+	u32 MACREG_DATA;	/* Mac-Reg Data */
+	u32 MACREG_ADDR;	/* Mac-Reg Addr */
+	u32 pad3[0x3e];
+	/* ALL DNET RX STATISTICS COUNTERS  */
+	u32 RX_PKT_IGNR_CNT;
+	u32 RX_LEN_CHK_ERR_CNT;
+	u32 RX_LNG_FRM_CNT;
+	u32 RX_SHRT_FRM_CNT;
+	u32 RX_IPG_VIOL_CNT;
+	u32 RX_CRC_ERR_CNT;
+	u32 RX_OK_PKT_CNT;
+	u32 RX_CTL_FRM_CNT;
+	u32 RX_PAUSE_FRM_CNT;
+	u32 RX_MULTICAST_CNT;
+	u32 RX_BROADCAST_CNT;
+	u32 RX_VLAN_TAG_CNT;
+	u32 RX_PRE_SHRINK_CNT;
+	u32 RX_DRIB_NIB_CNT;
+	u32 RX_UNSUP_OPCD_CNT;
+	u32 RX_BYTE_CNT;
+	u32 pad4[0x30];
+	/* DNET TX STATISTICS COUNTERS */
+	u32 TX_UNICAST_CNT;
+	u32 TX_PAUSE_FRM_CNT;
+	u32 TX_MULTICAST_CNT;
+	u32 TX_BRDCAST_CNT;
+	u32 TX_VLAN_TAG_CNT;
+	u32 TX_BAD_FCS_CNT;
+	u32 TX_JUMBO_CNT;
+	u32 TX_BYTE_CNT;
+};
+
+/* SOME INTERNAL MAC-CORE REGISTER */
+#define DNET_INTERNAL_MODE_REG			0x0
+#define DNET_INTERNAL_RXTX_CONTROL_REG		0x2
+#define DNET_INTERNAL_MAX_PKT_SIZE_REG		0x4
+#define DNET_INTERNAL_IGP_REG			0x8
+#define DNET_INTERNAL_MAC_ADDR_0_REG		0xa
+#define DNET_INTERNAL_MAC_ADDR_1_REG		0xc
+#define DNET_INTERNAL_MAC_ADDR_2_REG		0xe
+#define DNET_INTERNAL_TX_RX_STS_REG		0x12
+#define DNET_INTERNAL_GMII_MNG_CTL_REG		0x14
+#define DNET_INTERNAL_GMII_MNG_DAT_REG		0x16
+
+#define DNET_INTERNAL_GMII_MNG_CMD_FIN		(1 << 14)
+
+#define DNET_INTERNAL_WRITE			(1 << 31)
+
+/* MAC-CORE REGISTER FIELDS */
+
+/* MAC-CORE MODE REGISTER FIELDS */
+#define DNET_INTERNAL_MODE_GBITEN			(1 << 0)
+#define DNET_INTERNAL_MODE_FCEN				(1 << 1)
+#define DNET_INTERNAL_MODE_RXEN				(1 << 2)
+#define DNET_INTERNAL_MODE_TXEN				(1 << 3)
+
+/* MAC-CORE RXTX CONTROL REGISTER FIELDS */
+#define DNET_INTERNAL_RXTX_CONTROL_RXSHORTFRAME		(1 << 8)
+#define DNET_INTERNAL_RXTX_CONTROL_RXBROADCAST		(1 << 7)
+#define DNET_INTERNAL_RXTX_CONTROL_RXMULTICAST		(1 << 4)
+#define DNET_INTERNAL_RXTX_CONTROL_RXPAUSE		(1 << 3)
+#define DNET_INTERNAL_RXTX_CONTROL_DISTXFCS		(1 << 2)
+#define DNET_INTERNAL_RXTX_CONTROL_DISCFXFCS		(1 << 1)
+#define DNET_INTERNAL_RXTX_CONTROL_ENPROMISC		(1 << 0)
+#define DNET_INTERNAL_RXTX_CONTROL_DROPCONTROL		(1 << 6)
+#define DNET_INTERNAL_RXTX_CONTROL_ENABLEHALFDUP	(1 << 5)
+
+/* SYSTEM CONTROL REGISTER FIELDS */
+#define DNET_SYS_CTL_IGNORENEXTPKT			(1 << 0)
+#define DNET_SYS_CTL_SENDPAUSE				(1 << 2)
+#define DNET_SYS_CTL_RXFIFOFLUSH			(1 << 3)
+#define DNET_SYS_CTL_TXFIFOFLUSH			(1 << 4)
+
+/* TX STATUS REGISTER FIELDS */
+#define DNET_TX_STATUS_FIFO_ALMOST_EMPTY		(1 << 2)
+#define DNET_TX_STATUS_FIFO_ALMOST_FULL			(1 << 1)
+
+/* INTERRUPT SOURCE REGISTER FIELDS */
+#define DNET_INTR_SRC_TX_PKTSENT			(1 << 0)
+#define DNET_INTR_SRC_TX_FIFOAF				(1 << 1)
+#define DNET_INTR_SRC_TX_FIFOAE				(1 << 2)
+#define DNET_INTR_SRC_TX_DISCFRM			(1 << 3)
+#define DNET_INTR_SRC_TX_FIFOFULL			(1 << 4)
+#define DNET_INTR_SRC_RX_CMDFIFOAF			(1 << 8)
+#define DNET_INTR_SRC_RX_CMDFIFOFF			(1 << 9)
+#define DNET_INTR_SRC_RX_DATAFIFOFF			(1 << 10)
+#define DNET_INTR_SRC_TX_SUMMARY			(1 << 16)
+#define DNET_INTR_SRC_RX_SUMMARY			(1 << 17)
+#define DNET_INTR_SRC_PHY				(1 << 19)
+
+/* INTERRUPT ENABLE REGISTER FIELDS */
+#define DNET_INTR_ENB_TX_PKTSENT			(1 << 0)
+#define DNET_INTR_ENB_TX_FIFOAF				(1 << 1)
+#define DNET_INTR_ENB_TX_FIFOAE				(1 << 2)
+#define DNET_INTR_ENB_TX_DISCFRM			(1 << 3)
+#define DNET_INTR_ENB_TX_FIFOFULL			(1 << 4)
+#define DNET_INTR_ENB_RX_PKTRDY				(1 << 8)
+#define DNET_INTR_ENB_RX_FIFOAF				(1 << 9)
+#define DNET_INTR_ENB_RX_FIFOERR			(1 << 10)
+#define DNET_INTR_ENB_RX_ERROR				(1 << 11)
+#define DNET_INTR_ENB_RX_FIFOFULL			(1 << 12)
+#define DNET_INTR_ENB_RX_FIFOAE				(1 << 13)
+#define DNET_INTR_ENB_TX_SUMMARY			(1 << 16)
+#define DNET_INTR_ENB_RX_SUMMARY			(1 << 17)
+#define DNET_INTR_ENB_GLOBAL_ENABLE			(1 << 18)
+
+/*
+ * Capabilities. Used by the driver to know the capabilities that
+ * the ethernet controller inside the FPGA have.
+ */
+
+#define DNET_HAS_MDIO		(1 << 0)
+#define DNET_HAS_IRQ		(1 << 1)
+#define DNET_HAS_GIGABIT	(1 << 2)
+#define DNET_HAS_DMA		(1 << 3)
+
+#define DNET_HAS_MII		(1 << 4) /* or GMII */
+#define DNET_HAS_RMII		(1 << 5) /* or RGMII */
+
+#define DNET_CAPS_MASK		0xFFFF
+
+#define DNET_FIFO_SIZE		2048 /* 2K x 32 bit */
+#define DNET_FIFO_TX_DATA_AF_TH	(DNET_FIFO_SIZE - 384) /* 384 = 1536 / 4 */
+#define DNET_FIFO_TX_DATA_AE_TH	(384)
+
+#define DNET_FIFO_RX_CMD_AF_TH	(1 << 16) /* just one frame inside the FIFO */
+
+#endif

include/asm-arm/arch-mx31/mx31-regs.h

@@ -87,6 +87,16 @@
 #define WDOG_BASE		0x53FDC000
 
 /*
+ * GPIO
+ */
+#define GPIO1_BASE	0x53FCC000
+#define GPIO2_BASE	0x53FD0000
+#define GPIO3_BASE	0x53FA4000
+#define GPIO_DR		0x00000000	/* data register */
+#define GPIO_GDIR	0x00000004	/* direction register */
+#define GPIO_PSR	0x00000008	/* pad status register */
+
+/*
  * Signal Multiplexing (IOMUX)
  */
 

include/configs/omap3_zoom1.h

@@ -103,6 +103,7 @@
 #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
 #define CONFIG_CMD_MMC		/* MMC support			*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
+#define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
 
 #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
 #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/

include/configs/qong.h

@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2009, Ilya Yanok, Emcraft Systems, <yanok@emcraft.com>
+ *
+ * Configuration settings for the Dave/DENX QongEVB-LITE board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/mx31-regs.h>
+
+ /* High Level Configuration Options */
+#define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
+#define CONFIG_MX31		1	/* in a mx31 */
+#define CONFIG_QONG		1
+#define CONFIG_MX31_HCLK_FREQ	26000000	/* 26MHz */
+#define CONFIG_MX31_CLK32	32768
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Hardware drivers
+ */
+
+#define CONFIG_MX31_UART	1
+#define CONFIG_SYS_MX31_UART1	1
+
+/* FPGA */
+#define CONFIG_QONG_FPGA	1
+#define CONFIG_FPGA_BASE	(CS1_BASE)
+
+#ifdef CONFIG_QONG_FPGA
+/* Ethernet */
+#define CONFIG_DNET		1
+#define CONFIG_DNET_BASE	(CS1_BASE + QONG_FPGA_PERIPH_SIZE)
+#define CONFIG_NET_MULTI	1
+
+/*
+ * Reducing the ARP timeout from default 5 seconds to 200ms we speed up the
+ * initial TFTP transfer, should the user wish one, significantly.
+ */
+#define CONFIG_ARP_TIMEOUT	200UL
+
+#endif /* CONFIG_QONG_FPGA */
+
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_JFFS2
+
+/*
+ * You can compile in a MAC address and your custom net settings by using
+ * the following syntax.
+ *
+ * #define CONFIG_ETHADDR		xx:xx:xx:xx:xx:xx
+ * #define CONFIG_SERVERIP		<server ip>
+ * #define CONFIG_IPADDR		<board ip>
+ * #define CONFIG_GATEWAYIP		<gateway ip>
+ * #define CONFIG_NETMASK		<your netmask>
+ */
+
+#define CONFIG_BOOTDELAY	5
+
+#define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
+
+#define xstr(s)	str(s)
+#define str(s)	#s
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs}"				\
+		" console=ttymxc0,${baudrate}\0"			\
+	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
+	"addmisc=setenv bootargs ${bootargs}\0"				\
+	"uboot_addr=a0000000\0"						\
+	"kernel_addr=a0080000\0"					\
+	"ramdisk_addr=a0300000\0"					\
+	"u-boot=qong/u-boot.bin\0"					\
+	"kernel_addr_r=80800000\0"					\
+	"hostname=qong\0"						\
+	"bootfile=qong/uImage\0"					\
+	"rootpath=/opt/eldk-4.2-arm/armVFP\0"				\
+	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
+		"bootm ${kernel_addr}\0"				\
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
+		"run nfsargs addip addtty addmtd addmisc;"		\
+		"bootm\0"						\
+	"bootcmd=run flash_self\0"					\
+	"load=tftp ${loadaddr} ${u-boot}\0"				\
+	"update=protect off " xstr(CONFIG_SYS_MONITOR_BASE)		\
+		" +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE)	\
+		" +${filesize};cp.b ${fileaddr} "			\
+		xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"		\
+	"upd=run load update\0"						\
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+		sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		32	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+/* memtest works on first 255MB of RAM */
+#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
+#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1 + 0xff000000)
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_CMDLINE_EDITING	1
+
+#define CONFIG_MISC_INIT_R	1
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM_1		CSD0_BASE
+#define PHYS_SDRAM_1_SIZE	0x10000000	/* 256 MB */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_FLASH_BASE		CS0_BASE
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024
+/* Monitor at beginning of flash */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		0x40000		/* Reserve 256KiB */
+
+#define	CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
+
+/*-----------------------------------------------------------------------
+ * CFI FLASH driver setup
+ */
+/* Flash memory is CFI compliant */
+#define CONFIG_SYS_FLASH_CFI			1
+/* Use drivers/cfi_flash.c */
+#define CONFIG_FLASH_CFI_DRIVER			1
+/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_PROTECTION		1
+
+/*
+ * JFFS2 partitions
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=physmap-flash.0"
+#define MTDPARTS_DEFAULT	\
+	"mtdparts=physmap-flash.0:256k(U-Boot),128k(env1),"	\
+	"128k(env2),2560k(kernel),13m(ramdisk),-(user)"
+
+#endif /* __CONFIG_H */

include/netdev.h

@@ -44,6 +44,7 @@ int cpu_eth_init(bd_t *bis);
 int au1x00_enet_initialize(bd_t*);
 int bfin_EMAC_initialize(bd_t *bis);
 int dc21x4x_initialize(bd_t *bis);
+int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int e1000_initialize(bd_t *bis);
 int eepro100_initialize(bd_t *bis);
 int eth_3com_initialize (bd_t * bis);

lib_arm/board.c

@@ -287,9 +287,6 @@ void start_armboot (void)
 {
 	init_fnc_t **init_fnc_ptr;
 	char *s;
-#if !defined(CONFIG_SYS_NO_FLASH) || defined (CONFIG_VFD) || defined(CONFIG_LCD)
-	ulong size;
-#endif
 #if defined(CONFIG_VFD) || defined(CONFIG_LCD)
 	unsigned long addr;
 #endif
@@ -315,8 +312,7 @@ void start_armboot (void)
 
 #ifndef CONFIG_SYS_NO_FLASH
 	/* configure available FLASH banks */
-	size = flash_init ();
-	display_flash_config (size);
+	display_flash_config (flash_init ());
 #endif /* CONFIG_SYS_NO_FLASH */
 
 #ifdef CONFIG_VFD
@@ -328,7 +324,7 @@ void start_armboot (void)
 	 */
 	/* bss_end is defined in the board-specific linker script */
 	addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
-	size = vfd_setmem (addr);
+	vfd_setmem (addr);
 	gd->fb_base = addr;
 #endif /* CONFIG_VFD */
 
@@ -343,7 +339,7 @@ void start_armboot (void)
 		 */
 		/* bss_end is defined in the board-specific linker script */
 		addr = (_bss_end + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
-		size = lcd_setmem (addr);
+		lcd_setmem (addr);
 		gd->fb_base = addr;
 	}
 #endif /* CONFIG_LCD */