Sync all am57xx based dts files with latest Linux Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>master
parent
736a57e02f
commit
a0c0b97c6b
@ -0,0 +1,600 @@ |
||||
/* |
||||
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 as |
||||
* published by the Free Software Foundation. |
||||
*/ |
||||
/dts-v1/; |
||||
|
||||
#include "dra74x.dtsi" |
||||
#include "am57xx-commercial-grade.dtsi" |
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/interrupt-controller/irq.h> |
||||
|
||||
/ { |
||||
compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; |
||||
|
||||
chosen { |
||||
stdout-path = &uart3; |
||||
}; |
||||
|
||||
aliases { |
||||
rtc0 = &mcp_rtc; |
||||
rtc1 = &tps659038_rtc; |
||||
rtc2 = &rtc; |
||||
display0 = &hdmi0; |
||||
}; |
||||
|
||||
memory@0 { |
||||
device_type = "memory"; |
||||
reg = <0x0 0x80000000 0x0 0x80000000>; |
||||
}; |
||||
|
||||
vdd_3v3: fixedregulator-vdd_3v3 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "vdd_3v3"; |
||||
vin-supply = <®en1>; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
}; |
||||
|
||||
aic_dvdd: fixedregulator-aic_dvdd { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "aic_dvdd_fixed"; |
||||
vin-supply = <&vdd_3v3>; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
}; |
||||
|
||||
vtt_fixed: fixedregulator-vtt { |
||||
/* TPS51200 */ |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "vtt_fixed"; |
||||
vin-supply = <&smps3_reg>; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
enable-active-high; |
||||
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
|
||||
led0 { |
||||
label = "beagle-x15:usr0"; |
||||
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; |
||||
linux,default-trigger = "heartbeat"; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
led1 { |
||||
label = "beagle-x15:usr1"; |
||||
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; |
||||
linux,default-trigger = "cpu0"; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
led2 { |
||||
label = "beagle-x15:usr2"; |
||||
gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; |
||||
linux,default-trigger = "mmc0"; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
led3 { |
||||
label = "beagle-x15:usr3"; |
||||
gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; |
||||
linux,default-trigger = "disk-activity"; |
||||
default-state = "off"; |
||||
}; |
||||
}; |
||||
|
||||
gpio_fan: gpio_fan { |
||||
/* Based on 5v 500mA AFB02505HHB */ |
||||
compatible = "gpio-fan"; |
||||
gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; |
||||
gpio-fan,speed-map = <0 0>, |
||||
<13000 1>; |
||||
#cooling-cells = <2>; |
||||
}; |
||||
|
||||
hdmi0: connector { |
||||
compatible = "hdmi-connector"; |
||||
label = "hdmi"; |
||||
|
||||
type = "a"; |
||||
|
||||
port { |
||||
hdmi_connector_in: endpoint { |
||||
remote-endpoint = <&tpd12s015_out>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
tpd12s015: encoder { |
||||
compatible = "ti,tpd12s015"; |
||||
|
||||
ports { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
port@0 { |
||||
reg = <0>; |
||||
|
||||
tpd12s015_in: endpoint { |
||||
remote-endpoint = <&hdmi_out>; |
||||
}; |
||||
}; |
||||
|
||||
port@1 { |
||||
reg = <1>; |
||||
|
||||
tpd12s015_out: endpoint { |
||||
remote-endpoint = <&hdmi_connector_in>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
sound0: sound0 { |
||||
compatible = "simple-audio-card"; |
||||
simple-audio-card,name = "BeagleBoard-X15"; |
||||
simple-audio-card,widgets = |
||||
"Line", "Line Out", |
||||
"Line", "Line In"; |
||||
simple-audio-card,routing = |
||||
"Line Out", "LLOUT", |
||||
"Line Out", "RLOUT", |
||||
"MIC2L", "Line In", |
||||
"MIC2R", "Line In"; |
||||
simple-audio-card,format = "dsp_b"; |
||||
simple-audio-card,bitclock-master = <&sound0_master>; |
||||
simple-audio-card,frame-master = <&sound0_master>; |
||||
simple-audio-card,bitclock-inversion; |
||||
|
||||
simple-audio-card,cpu { |
||||
sound-dai = <&mcasp3>; |
||||
}; |
||||
|
||||
sound0_master: simple-audio-card,codec { |
||||
sound-dai = <&tlv320aic3104>; |
||||
clocks = <&clkout2_clk>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&dra7_pmx_core { |
||||
mmc1_pins_default: mmc1_pins_default { |
||||
pinctrl-single,pins = < |
||||
DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ |
||||
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ |
||||
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ |
||||
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ |
||||
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ |
||||
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ |
||||
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ |
||||
>; |
||||
}; |
||||
|
||||
mmc2_pins_default: mmc2_pins_default { |
||||
pinctrl-single,pins = < |
||||
DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ |
||||
DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ |
||||
DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ |
||||
DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ |
||||
DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ |
||||
DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ |
||||
DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ |
||||
DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ |
||||
DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ |
||||
DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ |
||||
>; |
||||
}; |
||||
}; |
||||
&i2c1 { |
||||
status = "okay"; |
||||
clock-frequency = <400000>; |
||||
|
||||
tps659038: tps659038@58 { |
||||
compatible = "ti,tps659038"; |
||||
reg = <0x58>; |
||||
interrupt-parent = <&gpio1>; |
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
||||
|
||||
#interrupt-cells = <2>; |
||||
interrupt-controller; |
||||
|
||||
ti,system-power-controller; |
||||
|
||||
tps659038_pmic { |
||||
compatible = "ti,tps659038-pmic"; |
||||
|
||||
regulators { |
||||
smps12_reg: smps12 { |
||||
/* VDD_MPU */ |
||||
regulator-name = "smps12"; |
||||
regulator-min-microvolt = < 850000>; |
||||
regulator-max-microvolt = <1250000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
smps3_reg: smps3 { |
||||
/* VDD_DDR */ |
||||
regulator-name = "smps3"; |
||||
regulator-min-microvolt = <1350000>; |
||||
regulator-max-microvolt = <1350000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
smps45_reg: smps45 { |
||||
/* VDD_DSPEVE, VDD_IVA, VDD_GPU */ |
||||
regulator-name = "smps45"; |
||||
regulator-min-microvolt = < 850000>; |
||||
regulator-max-microvolt = <1250000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
smps6_reg: smps6 { |
||||
/* VDD_CORE */ |
||||
regulator-name = "smps6"; |
||||
regulator-min-microvolt = <850000>; |
||||
regulator-max-microvolt = <1150000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
/* SMPS7 unused */ |
||||
|
||||
smps8_reg: smps8 { |
||||
/* VDD_1V8 */ |
||||
regulator-name = "smps8"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
/* SMPS9 unused */ |
||||
|
||||
ldo1_reg: ldo1 { |
||||
/* VDD_SD / VDDSHV8 */ |
||||
regulator-name = "ldo1"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-boot-on; |
||||
regulator-always-on; |
||||
}; |
||||
|
||||
ldo2_reg: ldo2 { |
||||
/* VDD_SHV5 */ |
||||
regulator-name = "ldo2"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
ldo3_reg: ldo3 { |
||||
/* VDDA_1V8_PHYA */ |
||||
regulator-name = "ldo3"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
ldo4_reg: ldo4 { |
||||
/* VDDA_1V8_PHYB */ |
||||
regulator-name = "ldo4"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
ldo9_reg: ldo9 { |
||||
/* VDD_RTC */ |
||||
regulator-name = "ldo9"; |
||||
regulator-min-microvolt = <1050000>; |
||||
regulator-max-microvolt = <1050000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
ldoln_reg: ldoln { |
||||
/* VDDA_1V8_PLL */ |
||||
regulator-name = "ldoln"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
ldousb_reg: ldousb { |
||||
/* VDDA_3V_USB: VDDA_USBHS33 */ |
||||
regulator-name = "ldousb"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
regen1: regen1 { |
||||
/* VDD_3V3_ON */ |
||||
regulator-name = "regen1"; |
||||
regulator-boot-on; |
||||
regulator-always-on; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
tps659038_rtc: tps659038_rtc { |
||||
compatible = "ti,palmas-rtc"; |
||||
interrupt-parent = <&tps659038>; |
||||
interrupts = <8 IRQ_TYPE_EDGE_FALLING>; |
||||
wakeup-source; |
||||
}; |
||||
|
||||
tps659038_pwr_button: tps659038_pwr_button { |
||||
compatible = "ti,palmas-pwrbutton"; |
||||
interrupt-parent = <&tps659038>; |
||||
interrupts = <1 IRQ_TYPE_EDGE_FALLING>; |
||||
wakeup-source; |
||||
ti,palmas-long-press-seconds = <12>; |
||||
}; |
||||
|
||||
tps659038_gpio: tps659038_gpio { |
||||
compatible = "ti,palmas-gpio"; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
}; |
||||
|
||||
extcon_usb2: tps659038_usb { |
||||
compatible = "ti,palmas-usb-vid"; |
||||
ti,enable-vbus-detection; |
||||
vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
}; |
||||
|
||||
tmp102: tmp102@48 { |
||||
compatible = "ti,tmp102"; |
||||
reg = <0x48>; |
||||
interrupt-parent = <&gpio7>; |
||||
interrupts = <16 IRQ_TYPE_LEVEL_LOW>; |
||||
#thermal-sensor-cells = <1>; |
||||
}; |
||||
|
||||
tlv320aic3104: tlv320aic3104@18 { |
||||
#sound-dai-cells = <0>; |
||||
compatible = "ti,tlv320aic3104"; |
||||
reg = <0x18>; |
||||
assigned-clocks = <&clkoutmux2_clk_mux>; |
||||
assigned-clock-parents = <&sys_clk2_dclk_div>; |
||||
|
||||
status = "okay"; |
||||
adc-settle-ms = <40>; |
||||
|
||||
AVDD-supply = <&vdd_3v3>; |
||||
IOVDD-supply = <&vdd_3v3>; |
||||
DRVDD-supply = <&vdd_3v3>; |
||||
DVDD-supply = <&aic_dvdd>; |
||||
}; |
||||
|
||||
eeprom: eeprom@50 { |
||||
compatible = "at,24c32"; |
||||
reg = <0x50>; |
||||
}; |
||||
}; |
||||
|
||||
&i2c3 { |
||||
status = "okay"; |
||||
clock-frequency = <400000>; |
||||
|
||||
mcp_rtc: rtc@6f { |
||||
compatible = "microchip,mcp7941x"; |
||||
reg = <0x6f>; |
||||
interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>, |
||||
<&dra7_pmx_core 0x424>; |
||||
interrupt-names = "irq", "wakeup"; |
||||
|
||||
vcc-supply = <&vdd_3v3>; |
||||
wakeup-source; |
||||
}; |
||||
}; |
||||
|
||||
&gpio7 { |
||||
ti,no-reset-on-init; |
||||
ti,no-idle-on-init; |
||||
}; |
||||
|
||||
&cpu0 { |
||||
cpu0-supply = <&smps12_reg>; |
||||
voltage-tolerance = <1>; |
||||
}; |
||||
|
||||
&uart3 { |
||||
status = "okay"; |
||||
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
||||
<&dra7_pmx_core 0x3f8>; |
||||
}; |
||||
|
||||
&mac { |
||||
status = "okay"; |
||||
dual_emac; |
||||
}; |
||||
|
||||
&cpsw_emac0 { |
||||
phy_id = <&davinci_mdio>, <1>; |
||||
phy-mode = "rgmii"; |
||||
dual_emac_res_vlan = <1>; |
||||
}; |
||||
|
||||
&cpsw_emac1 { |
||||
phy_id = <&davinci_mdio>, <2>; |
||||
phy-mode = "rgmii"; |
||||
dual_emac_res_vlan = <2>; |
||||
}; |
||||
|
||||
&mmc1 { |
||||
status = "okay"; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&mmc1_pins_default>; |
||||
|
||||
bus-width = <4>; |
||||
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ |
||||
}; |
||||
|
||||
&mmc2 { |
||||
status = "okay"; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&mmc2_pins_default>; |
||||
|
||||
vmmc-supply = <&vdd_3v3>; |
||||
bus-width = <8>; |
||||
ti,non-removable; |
||||
cap-mmc-dual-data-rate; |
||||
}; |
||||
|
||||
&sata { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb2_phy1 { |
||||
phy-supply = <&ldousb_reg>; |
||||
}; |
||||
|
||||
&usb2_phy2 { |
||||
phy-supply = <&ldousb_reg>; |
||||
}; |
||||
|
||||
&usb1 { |
||||
dr_mode = "host"; |
||||
}; |
||||
|
||||
&omap_dwc3_2 { |
||||
extcon = <&extcon_usb2>; |
||||
}; |
||||
|
||||
&usb2 { |
||||
/* |
||||
* Stand alone usage is peripheral only. |
||||
* However, with some resistor modifications |
||||
* this port can be used via expansion connectors |
||||
* as "host" or "dual-role". If so, provide |
||||
* the necessary dr_mode override in the expansion |
||||
* board's DT. |
||||
*/ |
||||
dr_mode = "peripheral"; |
||||
}; |
||||
|
||||
&cpu_trips { |
||||
cpu_alert1: cpu_alert1 { |
||||
temperature = <50000>; /* millicelsius */ |
||||
hysteresis = <2000>; /* millicelsius */ |
||||
type = "active"; |
||||
}; |
||||
}; |
||||
|
||||
&cpu_cooling_maps { |
||||
map1 { |
||||
trip = <&cpu_alert1>; |
||||
cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
||||
}; |
||||
}; |
||||
|
||||
&thermal_zones { |
||||
board_thermal: board_thermal { |
||||
polling-delay-passive = <1250>; /* milliseconds */ |
||||
polling-delay = <1500>; /* milliseconds */ |
||||
|
||||
/* sensor ID */ |
||||
thermal-sensors = <&tmp102 0>; |
||||
|
||||
board_trips: trips { |
||||
board_alert0: board_alert { |
||||
temperature = <40000>; /* millicelsius */ |
||||
hysteresis = <2000>; /* millicelsius */ |
||||
type = "active"; |
||||
}; |
||||
|
||||
board_crit: board_crit { |
||||
temperature = <105000>; /* millicelsius */ |
||||
hysteresis = <0>; /* millicelsius */ |
||||
type = "critical"; |
||||
}; |
||||
}; |
||||
|
||||
board_cooling_maps: cooling-maps { |
||||
map0 { |
||||
trip = <&board_alert0>; |
||||
cooling-device = |
||||
<&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&dss { |
||||
status = "ok"; |
||||
|
||||
vdda_video-supply = <&ldoln_reg>; |
||||
}; |
||||
|
||||
&hdmi { |
||||
status = "ok"; |
||||
vdda-supply = <&ldo4_reg>; |
||||
|
||||
port { |
||||
hdmi_out: endpoint { |
||||
remote-endpoint = <&tpd12s015_in>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&pcie1 { |
||||
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; |
||||
}; |
||||
|
||||
&mcasp3 { |
||||
#sound-dai-cells = <0>; |
||||
assigned-clocks = <&mcasp3_ahclkx_mux>; |
||||
assigned-clock-parents = <&sys_clkin2>; |
||||
status = "okay"; |
||||
|
||||
op-mode = <0>; /* MCASP_IIS_MODE */ |
||||
tdm-slots = <2>; |
||||
/* 4 serializers */ |
||||
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ |
||||
1 2 0 0 |
||||
>; |
||||
tx-num-evt = <32>; |
||||
rx-num-evt = <32>; |
||||
}; |
||||
|
||||
&mailbox5 { |
||||
status = "okay"; |
||||
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { |
||||
status = "okay"; |
||||
}; |
||||
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { |
||||
status = "okay"; |
||||
}; |
||||
}; |
||||
|
||||
&mailbox6 { |
||||
status = "okay"; |
||||
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { |
||||
status = "okay"; |
||||
}; |
||||
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { |
||||
status = "okay"; |
||||
}; |
||||
}; |
@ -0,0 +1,24 @@ |
||||
/* |
||||
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 as |
||||
* published by the Free Software Foundation. |
||||
*/ |
||||
|
||||
#include "am57xx-beagle-x15-common.dtsi" |
||||
|
||||
/ { |
||||
model = "TI AM5728 BeagleBoard-X15 rev B1"; |
||||
}; |
||||
|
||||
&tpd12s015 { |
||||
gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ |
||||
<&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */ |
||||
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ |
||||
}; |
||||
|
||||
&mmc1 { |
||||
vmmc-supply = <&vdd_3v3>; |
||||
vmmc-aux-supply = <&ldo1_reg>; |
||||
}; |
@ -1,699 +1,24 @@ |
||||
/* |
||||
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ |
||||
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ |
||||
* |
||||
* This program is free software; you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License version 2 as |
||||
* published by the Free Software Foundation. |
||||
*/ |
||||
/dts-v1/; |
||||
|
||||
#include "dra74x.dtsi" |
||||
#include <dt-bindings/gpio/gpio.h> |
||||
#include <dt-bindings/interrupt-controller/irq.h> |
||||
#include "am57xx-beagle-x15-common.dtsi" |
||||
|
||||
/ { |
||||
/* NOTE: This describes the "original" pre-production A2 revision */ |
||||
model = "TI AM5728 BeagleBoard-X15"; |
||||
compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; |
||||
|
||||
chosen { |
||||
stdout-path = &uart3; |
||||
}; |
||||
|
||||
aliases { |
||||
rtc0 = &mcp_rtc; |
||||
rtc1 = &tps659038_rtc; |
||||
rtc2 = &rtc; |
||||
display0 = &hdmi0; |
||||
}; |
||||
|
||||
memory { |
||||
device_type = "memory"; |
||||
reg = <0x80000000 0x80000000>; |
||||
}; |
||||
|
||||
vdd_3v3: fixedregulator-vdd_3v3 { |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "vdd_3v3"; |
||||
vin-supply = <®en1>; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
}; |
||||
|
||||
vtt_fixed: fixedregulator-vtt { |
||||
/* TPS51200 */ |
||||
compatible = "regulator-fixed"; |
||||
regulator-name = "vtt_fixed"; |
||||
vin-supply = <&smps3_reg>; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
enable-active-high; |
||||
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; |
||||
}; |
||||
|
||||
leds { |
||||
compatible = "gpio-leds"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&leds_pins_default>; |
||||
|
||||
led@0 { |
||||
label = "beagle-x15:usr0"; |
||||
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; |
||||
linux,default-trigger = "heartbeat"; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
led@1 { |
||||
label = "beagle-x15:usr1"; |
||||
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; |
||||
linux,default-trigger = "cpu0"; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
led@2 { |
||||
label = "beagle-x15:usr2"; |
||||
gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; |
||||
linux,default-trigger = "mmc0"; |
||||
default-state = "off"; |
||||
}; |
||||
|
||||
led@3 { |
||||
label = "beagle-x15:usr3"; |
||||
gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; |
||||
linux,default-trigger = "ide-disk"; |
||||
default-state = "off"; |
||||
}; |
||||
}; |
||||
|
||||
gpio_fan: gpio_fan { |
||||
/* Based on 5v 500mA AFB02505HHB */ |
||||
compatible = "gpio-fan"; |
||||
gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; |
||||
gpio-fan,speed-map = <0 0>, |
||||
<13000 1>; |
||||
#cooling-cells = <2>; |
||||
}; |
||||
|
||||
extcon_usb1: extcon_usb1 { |
||||
compatible = "linux,extcon-usb-gpio"; |
||||
id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&extcon_usb1_pins>; |
||||
}; |
||||
|
||||
extcon_usb2: extcon_usb2 { |
||||
compatible = "linux,extcon-usb-gpio"; |
||||
id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&extcon_usb2_pins>; |
||||
}; |
||||
|
||||
hdmi0: connector { |
||||
compatible = "hdmi-connector"; |
||||
label = "hdmi"; |
||||
|
||||
type = "a"; |
||||
|
||||
port { |
||||
hdmi_connector_in: endpoint { |
||||
remote-endpoint = <&tpd12s015_out>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
tpd12s015: encoder { |
||||
compatible = "ti,tpd12s015"; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&tpd12s015_pins>; |
||||
|
||||
gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ |
||||
<&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ |
||||
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ |
||||
|
||||
ports { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
port@0 { |
||||
reg = <0>; |
||||
|
||||
tpd12s015_in: endpoint { |
||||
remote-endpoint = <&hdmi_out>; |
||||
}; |
||||
}; |
||||
|
||||
port@1 { |
||||
reg = <1>; |
||||
|
||||
tpd12s015_out: endpoint { |
||||
remote-endpoint = <&hdmi_connector_in>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&dra7_pmx_core { |
||||
leds_pins_default: leds_pins_default { |
||||
pinctrl-single,pins = < |
||||
0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */ |
||||
0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */ |
||||
0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */ |
||||
0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */ |
||||
>; |
||||
}; |
||||
|
||||
i2c1_pins_default: i2c1_pins_default { |
||||
pinctrl-single,pins = < |
||||
0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ |
||||
0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ |
||||
>; |
||||
}; |
||||
|
||||
hdmi_pins: pinmux_hdmi_pins { |
||||
pinctrl-single,pins = < |
||||
0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ |
||||
0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ |
||||
>; |
||||
}; |
||||
|
||||
i2c3_pins_default: i2c3_pins_default { |
||||
pinctrl-single,pins = < |
||||
0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ |
||||
0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ |
||||
>; |
||||
}; |
||||
|
||||
uart3_pins_default: uart3_pins_default { |
||||
pinctrl-single,pins = < |
||||
0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ |
||||
0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ |
||||
>; |
||||
}; |
||||
|
||||
mmc1_pins_default: mmc1_pins_default { |
||||
pinctrl-single,pins = < |
||||
0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ |
||||
0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ |
||||
0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ |
||||
0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ |
||||
0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ |
||||
0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ |
||||
0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ |
||||
>; |
||||
}; |
||||
|
||||
mmc2_pins_default: mmc2_pins_default { |
||||
pinctrl-single,pins = < |
||||
0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ |
||||
0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ |
||||
0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ |
||||
0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ |
||||
0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ |
||||
0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ |
||||
0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ |
||||
0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ |
||||
0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ |
||||
0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ |
||||
>; |
||||
}; |
||||
|
||||
cpsw_pins_default: cpsw_pins_default { |
||||
pinctrl-single,pins = < |
||||
/* Slave 1 */ |
||||
0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ |
||||
0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ |
||||
0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ |
||||
0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ |
||||
0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ |
||||
0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ |
||||
0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ |
||||
0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ |
||||
0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ |
||||
0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ |
||||
0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ |
||||
0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ |
||||
|
||||
/* Slave 2 */ |
||||
0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ |
||||
0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ |
||||
0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ |
||||
0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ |
||||
0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ |
||||
0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ |
||||
0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ |
||||
0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ |
||||
0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ |
||||
0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ |
||||
0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ |
||||
0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ |
||||
>; |
||||
|
||||
}; |
||||
|
||||
cpsw_pins_sleep: cpsw_pins_sleep { |
||||
pinctrl-single,pins = < |
||||
/* Slave 1 */ |
||||
0x250 (PIN_INPUT | MUX_MODE15) |
||||
0x254 (PIN_INPUT | MUX_MODE15) |
||||
0x258 (PIN_INPUT | MUX_MODE15) |
||||
0x25c (PIN_INPUT | MUX_MODE15) |
||||
0x260 (PIN_INPUT | MUX_MODE15) |
||||
0x264 (PIN_INPUT | MUX_MODE15) |
||||
0x268 (PIN_INPUT | MUX_MODE15) |
||||
0x26c (PIN_INPUT | MUX_MODE15) |
||||
0x270 (PIN_INPUT | MUX_MODE15) |
||||
0x274 (PIN_INPUT | MUX_MODE15) |
||||
0x278 (PIN_INPUT | MUX_MODE15) |
||||
0x27c (PIN_INPUT | MUX_MODE15) |
||||
|
||||
/* Slave 2 */ |
||||
0x198 (PIN_INPUT | MUX_MODE15) |
||||
0x19c (PIN_INPUT | MUX_MODE15) |
||||
0x1a0 (PIN_INPUT | MUX_MODE15) |
||||
0x1a4 (PIN_INPUT | MUX_MODE15) |
||||
0x1a8 (PIN_INPUT | MUX_MODE15) |
||||
0x1ac (PIN_INPUT | MUX_MODE15) |
||||
0x1b0 (PIN_INPUT | MUX_MODE15) |
||||
0x1b4 (PIN_INPUT | MUX_MODE15) |
||||
0x1b8 (PIN_INPUT | MUX_MODE15) |
||||
0x1bc (PIN_INPUT | MUX_MODE15) |
||||
0x1c0 (PIN_INPUT | MUX_MODE15) |
||||
0x1c4 (PIN_INPUT | MUX_MODE15) |
||||
>; |
||||
}; |
||||
|
||||
davinci_mdio_pins_default: davinci_mdio_pins_default { |
||||
pinctrl-single,pins = < |
||||
/* MDIO */ |
||||
0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */ |
||||
0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */ |
||||
>; |
||||
}; |
||||
|
||||
davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { |
||||
pinctrl-single,pins = < |
||||
0x23c (PIN_INPUT | MUX_MODE15) |
||||
0x240 (PIN_INPUT | MUX_MODE15) |
||||
>; |
||||
}; |
||||
|
||||
tps659038_pins_default: tps659038_pins_default { |
||||
pinctrl-single,pins = < |
||||
0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ |
||||
>; |
||||
}; |
||||
|
||||
tmp102_pins_default: tmp102_pins_default { |
||||
pinctrl-single,pins = < |
||||
0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */ |
||||
>; |
||||
}; |
||||
|
||||
mcp79410_pins_default: mcp79410_pins_default { |
||||
pinctrl-single,pins = < |
||||
0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ |
||||
>; |
||||
}; |
||||
|
||||
usb1_pins: pinmux_usb1_pins { |
||||
pinctrl-single,pins = < |
||||
0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ |
||||
>; |
||||
}; |
||||
|
||||
extcon_usb1_pins: extcon_usb1_pins { |
||||
pinctrl-single,pins = < |
||||
0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ |
||||
>; |
||||
}; |
||||
|
||||
extcon_usb2_pins: extcon_usb2_pins { |
||||
pinctrl-single,pins = < |
||||
0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */ |
||||
>; |
||||
}; |
||||
|
||||
tpd12s015_pins: pinmux_tpd12s015_pins { |
||||
pinctrl-single,pins = < |
||||
0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ |
||||
0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ |
||||
0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ |
||||
>; |
||||
}; |
||||
}; |
||||
|
||||
&i2c1 { |
||||
status = "okay"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&i2c1_pins_default>; |
||||
clock-frequency = <400000>; |
||||
|
||||
tps659038: tps659038@58 { |
||||
compatible = "ti,tps659038"; |
||||
reg = <0x58>; |
||||
interrupt-parent = <&gpio1>; |
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&tps659038_pins_default>; |
||||
|
||||
#interrupt-cells = <2>; |
||||
interrupt-controller; |
||||
|
||||
ti,system-power-controller; |
||||
|
||||
tps659038_pmic { |
||||
compatible = "ti,tps659038-pmic"; |
||||
|
||||
regulators { |
||||
smps12_reg: smps12 { |
||||
/* VDD_MPU */ |
||||
regulator-name = "smps12"; |
||||
regulator-min-microvolt = < 850000>; |
||||
regulator-max-microvolt = <1250000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
smps3_reg: smps3 { |
||||
/* VDD_DDR */ |
||||
regulator-name = "smps3"; |
||||
regulator-min-microvolt = <1350000>; |
||||
regulator-max-microvolt = <1350000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
smps45_reg: smps45 { |
||||
/* VDD_DSPEVE, VDD_IVA, VDD_GPU */ |
||||
regulator-name = "smps45"; |
||||
regulator-min-microvolt = < 850000>; |
||||
regulator-max-microvolt = <1150000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
smps6_reg: smps6 { |
||||
/* VDD_CORE */ |
||||
regulator-name = "smps6"; |
||||
regulator-min-microvolt = <850000>; |
||||
regulator-max-microvolt = <1030000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
/* SMPS7 unused */ |
||||
|
||||
smps8_reg: smps8 { |
||||
/* VDD_1V8 */ |
||||
regulator-name = "smps8"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
/* SMPS9 unused */ |
||||
|
||||
ldo1_reg: ldo1 { |
||||
/* VDD_SD */ |
||||
regulator-name = "ldo1"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
ldo2_reg: ldo2 { |
||||
/* VDD_SHV5 */ |
||||
regulator-name = "ldo2"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
ldo3_reg: ldo3 { |
||||
/* VDDA_1V8_PHY */ |
||||
regulator-name = "ldo3"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
ldo9_reg: ldo9 { |
||||
/* VDD_RTC */ |
||||
regulator-name = "ldo9"; |
||||
regulator-min-microvolt = <1050000>; |
||||
regulator-max-microvolt = <1050000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
ldoln_reg: ldoln { |
||||
/* VDDA_1V8_PLL */ |
||||
regulator-name = "ldoln"; |
||||
regulator-min-microvolt = <1800000>; |
||||
regulator-max-microvolt = <1800000>; |
||||
regulator-always-on; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
ldousb_reg: ldousb { |
||||
/* VDDA_3V_USB: VDDA_USBHS33 */ |
||||
regulator-name = "ldousb"; |
||||
regulator-min-microvolt = <3300000>; |
||||
regulator-max-microvolt = <3300000>; |
||||
regulator-boot-on; |
||||
}; |
||||
|
||||
regen1: regen1 { |
||||
/* VDD_3V3_ON */ |
||||
regulator-name = "regen1"; |
||||
regulator-boot-on; |
||||
regulator-always-on; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
tps659038_rtc: tps659038_rtc { |
||||
compatible = "ti,palmas-rtc"; |
||||
interrupt-parent = <&tps659038>; |
||||
interrupts = <8 IRQ_TYPE_EDGE_FALLING>; |
||||
wakeup-source; |
||||
}; |
||||
|
||||
tps659038_pwr_button: tps659038_pwr_button { |
||||
compatible = "ti,palmas-pwrbutton"; |
||||
interrupt-parent = <&tps659038>; |
||||
interrupts = <1 IRQ_TYPE_EDGE_FALLING>; |
||||
wakeup-source; |
||||
ti,palmas-long-press-seconds = <12>; |
||||
}; |
||||
|
||||
tps659038_gpio: tps659038_gpio { |
||||
compatible = "ti,palmas-gpio"; |
||||
gpio-controller; |
||||
#gpio-cells = <2>; |
||||
}; |
||||
}; |
||||
|
||||
tmp102: tmp102@48 { |
||||
compatible = "ti,tmp102"; |
||||
reg = <0x48>; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&tmp102_pins_default>; |
||||
interrupt-parent = <&gpio7>; |
||||
interrupts = <16 IRQ_TYPE_LEVEL_LOW>; |
||||
#thermal-sensor-cells = <1>; |
||||
}; |
||||
}; |
||||
|
||||
&i2c3 { |
||||
status = "okay"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&i2c3_pins_default>; |
||||
clock-frequency = <400000>; |
||||
|
||||
mcp_rtc: rtc@6f { |
||||
compatible = "microchip,mcp7941x"; |
||||
reg = <0x6f>; |
||||
interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */ |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&mcp79410_pins_default>; |
||||
|
||||
vcc-supply = <&vdd_3v3>; |
||||
wakeup-source; |
||||
}; |
||||
}; |
||||
|
||||
&gpio7 { |
||||
ti,no-reset-on-init; |
||||
ti,no-idle-on-init; |
||||
}; |
||||
|
||||
&cpu0 { |
||||
cpu0-supply = <&smps12_reg>; |
||||
voltage-tolerance = <1>; |
||||
}; |
||||
|
||||
&uart3 { |
||||
status = "okay"; |
||||
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
||||
<&dra7_pmx_core 0x3f8>; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&uart3_pins_default>; |
||||
}; |
||||
|
||||
&mac { |
||||
status = "okay"; |
||||
pinctrl-names = "default", "sleep"; |
||||
pinctrl-0 = <&cpsw_pins_default>; |
||||
pinctrl-1 = <&cpsw_pins_sleep>; |
||||
dual_emac; |
||||
}; |
||||
|
||||
&cpsw_emac0 { |
||||
phy_id = <&davinci_mdio>, <1>; |
||||
phy-mode = "rgmii"; |
||||
dual_emac_res_vlan = <1>; |
||||
}; |
||||
|
||||
&cpsw_emac1 { |
||||
phy_id = <&davinci_mdio>, <2>; |
||||
phy-mode = "rgmii"; |
||||
dual_emac_res_vlan = <2>; |
||||
}; |
||||
|
||||
&davinci_mdio { |
||||
pinctrl-names = "default", "sleep"; |
||||
pinctrl-0 = <&davinci_mdio_pins_default>; |
||||
pinctrl-1 = <&davinci_mdio_pins_sleep>; |
||||
&tpd12s015 { |
||||
gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ |
||||
<&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ |
||||
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ |
||||
}; |
||||
|
||||
&mmc1 { |
||||
status = "okay"; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&mmc1_pins_default>; |
||||
|
||||
vmmc-supply = <&ldo1_reg>; |
||||
vmmc_aux-supply = <&vdd_3v3>; |
||||
pbias-supply = <&pbias_mmc_reg>; |
||||
bus-width = <4>; |
||||
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ |
||||
}; |
||||
|
||||
&mmc2 { |
||||
status = "okay"; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&mmc2_pins_default>; |
||||
|
||||
vmmc-supply = <&vdd_3v3>; |
||||
bus-width = <8>; |
||||
ti,non-removable; |
||||
cap-mmc-dual-data-rate; |
||||
}; |
||||
|
||||
&sata { |
||||
status = "okay"; |
||||
}; |
||||
|
||||
&usb2_phy1 { |
||||
phy-supply = <&ldousb_reg>; |
||||
}; |
||||
|
||||
&usb2_phy2 { |
||||
phy-supply = <&ldousb_reg>; |
||||
}; |
||||
|
||||
&usb1 { |
||||
dr_mode = "host"; |
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&usb1_pins>; |
||||
}; |
||||
|
||||
&omap_dwc3_1 { |
||||
extcon = <&extcon_usb1>; |
||||
}; |
||||
|
||||
&omap_dwc3_2 { |
||||
extcon = <&extcon_usb2>; |
||||
}; |
||||
|
||||
&usb2 { |
||||
dr_mode = "peripheral"; |
||||
}; |
||||
|
||||
&cpu_trips { |
||||
cpu_alert1: cpu_alert1 { |
||||
temperature = <50000>; /* millicelsius */ |
||||
hysteresis = <2000>; /* millicelsius */ |
||||
type = "active"; |
||||
}; |
||||
}; |
||||
|
||||
&cpu_cooling_maps { |
||||
map1 { |
||||
trip = <&cpu_alert1>; |
||||
cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
||||
}; |
||||
}; |
||||
|
||||
&thermal_zones { |
||||
board_thermal: board_thermal { |
||||
polling-delay-passive = <1250>; /* milliseconds */ |
||||
polling-delay = <1500>; /* milliseconds */ |
||||
|
||||
/* sensor ID */ |
||||
thermal-sensors = <&tmp102 0>; |
||||
|
||||
board_trips: trips { |
||||
board_alert0: board_alert { |
||||
temperature = <40000>; /* millicelsius */ |
||||
hysteresis = <2000>; /* millicelsius */ |
||||
type = "active"; |
||||
}; |
||||
|
||||
board_crit: board_crit { |
||||
temperature = <105000>; /* millicelsius */ |
||||
hysteresis = <0>; /* millicelsius */ |
||||
type = "critical"; |
||||
}; |
||||
}; |
||||
|
||||
board_cooling_maps: cooling-maps { |
||||
map0 { |
||||
trip = <&board_alert0>; |
||||
cooling-device = |
||||
<&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
||||
}; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
&dss { |
||||
status = "ok"; |
||||
|
||||
vdda_video-supply = <&ldoln_reg>; |
||||
}; |
||||
|
||||
&hdmi { |
||||
status = "ok"; |
||||
vdda-supply = <&ldo3_reg>; |
||||
|
||||
pinctrl-names = "default"; |
||||
pinctrl-0 = <&hdmi_pins>; |
||||
|
||||
port { |
||||
hdmi_out: endpoint { |
||||
remote-endpoint = <&tpd12s015_in>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
@ -0,0 +1,23 @@ |
||||
&cpu_alert0 { |
||||
temperature = <80000>; /* milliCelsius */ |
||||
}; |
||||
|
||||
&cpu_crit { |
||||
temperature = <90000>; /* milliCelsius */ |
||||
}; |
||||
|
||||
&gpu_crit { |
||||
temperature = <90000>; /* milliCelsius */ |
||||
}; |
||||
|
||||
&core_crit { |
||||
temperature = <90000>; /* milliCelsius */ |
||||
}; |
||||
|
||||
&dspeve_crit { |
||||
temperature = <90000>; /* milliCelsius */ |
||||
}; |
||||
|
||||
&iva_crit { |
||||
temperature = <90000>; /* milliCelsius */ |
||||
}; |
@ -0,0 +1,23 @@ |
||||
&cpu_alert0 { |
||||
temperature = <90000>; /* milliCelsius */ |
||||
}; |
||||
|
||||
&cpu_crit { |
||||
temperature = <105000>; /* milliCelsius */ |
||||
}; |
||||
|
||||
&gpu_crit { |
||||
temperature = <105000>; /* milliCelsius */ |
||||
}; |
||||
|
||||
&core_crit { |
||||
temperature = <105000>; /* milliCelsius */ |
||||
}; |
||||
|
||||
&dspeve_crit { |
||||
temperature = <105000>; /* milliCelsius */ |
||||
}; |
||||
|
||||
&iva_crit { |
||||
temperature = <105000>; /* milliCelsius */ |
||||
}; |
Loading…
Reference in new issue