* Patch by George G. Davis, 06 Jul 2004:

- update mach-types.h to latest arm.linux.org.uk master list
  - Set correct OMAP1610 bi_arch_number for build target

* Patch by Curt Brune, 06 Jul 2004:
  evb4510: add support for timer interrupt; cleanup

CHANGELOG

@@ -2,6 +2,13 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patch by George G. Davis, 06 Jul 2004:
+  - update mach-types.h to latest arm.linux.org.uk master list
+  - Set correct OMAP1610 bi_arch_number for build target
+
+* Patch by Curt Brune, 06 Jul 2004:
+  evb4510: add support for timer interrupt; cleanup
+
 * Patch by Dan Poirot, 06 Jul 2004:
   Fix sbc8260 environment variables
 

board/evb4510/evb4510.c

@@ -25,13 +25,9 @@
 #include <asm/hardware.h>
 #include <command.h>
 
-/* ------------------------------------------------------------------------- */
-
+#ifdef CONFIG_EVB4510
 
-#define PUT_LED(val)       (PUT_REG(REG_IOPDATA, (~val)&0xFF))
-#define GET_LED()          ((~GET_REG( REG_IOPDATA)) & 0xFF)
-#define SET_LED(val)       { u32 led = GET_LED(); led |= 1 << (val);  PUT_LED( led); }
-#define CLR_LED(val)       { u32 led = GET_LED(); led &= ~(1 << (val));  PUT_LED( led); }
+/* ------------------------------------------------------------------------- */
 
 /*
  * Miscelaneous platform dependent initialisations
@@ -51,25 +47,6 @@ int board_init (void)
 	PUT_REG( REG_IOPMODE, 0xFFFF);
 	PUT_REG( REG_IOPDATA, 0xFF);
 
-	/* enable LED 7 to show we're alive */
-	SET_LED( 7);
-
-	/* configure free running timer 1 */
-	/* Stop timer 1 */
-	CLR_REG( REG_TMOD, TM1_RUN);
-
-	/* Configure for toggle mode */
-	SET_REG( REG_TMOD, TM1_TOGGLE);
-
-	/* Load Timer data register with count down value */
-	PUT_REG( REG_TDATA1, 0xFFFFFFFF);
-
-	/* Clear timer counter register */
-	PUT_REG( REG_TCNT1, 0x0);
-
-	/* Start timer -- count down timer */
-	SET_REG( REG_TMOD, TM1_RUN);
-
 	return 0;
 }
 
@@ -84,3 +61,5 @@ int dram_init (void)
 #endif
 	return 0;
 }
+
+#endif

board/omap1610inn/omap1610innovator.c

@@ -32,6 +32,7 @@
  */
 
 #include <common.h>
+#include <asm/mach-types.h>
 #if defined(CONFIG_OMAP1610)
 #include <./configs/omap1510.h>
 #endif
@@ -62,9 +63,12 @@ int board_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	/* arch number of OMAP 1510-Board */
-	/* to be changed for OMAP 1610 Board */
-	gd->bd->bi_arch_number = 234;
+	if (machine_is_omap_h2())
+		gd->bd->bi_arch_number = MACH_TYPE_OMAP_H2;
+	else if (machine_is_omap_innovator())
+		gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR;
+	else
+		gd->bd->bi_arch_number = MACH_TYPE_OMAP_GENERIC;
 
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x10000100;

cpu/arm720t/interrupts.c

@@ -46,6 +46,15 @@ extern void reset_cpu(ulong addr);
 #define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
 #endif
 
+#ifdef CONFIG_S3C4510B
+/* require interrupts for the S3C4510B */
+# ifndef CONFIG_USE_IRQ
+#  error CONFIG_USE_IRQ _must_ be defined when using CONFIG_S3C4510B
+# else
+static struct _irq_handler IRQ_HANDLER[N_IRQS];
+# endif
+#endif	/* CONFIG_S3C4510B */
+
 #ifdef CONFIG_USE_IRQ
 /* enable IRQ/FIQ interrupts */
 void enable_interrupts (void)
@@ -75,7 +84,7 @@ int disable_interrupts (void)
 			     : "memory");
 	return (old & 0x80) == 0;
 }
-#else
+#else /* CONFIG_USE_IRQ */
 void enable_interrupts (void)
 {
 	return;
@@ -86,7 +95,6 @@ int disable_interrupts (void)
 }
 #endif
 
-
 void bad_mode (void)
 {
 	panic ("Resetting CPU ...\n");
@@ -174,11 +182,42 @@ void do_fiq (struct pt_regs *pt_regs)
 
 void do_irq (struct pt_regs *pt_regs)
 {
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM)
 	printf ("interrupt request\n");
 	show_regs (pt_regs);
 	bad_mode ();
+#elif defined(CONFIG_S3C4510B)
+	unsigned int pending;
+
+	while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) {  /* sentinal value for no pending interrutps */
+		IRQ_HANDLER[pending>>2].m_func( IRQ_HANDLER[pending>>2].m_data);
+
+		/* clear pending interrupt */
+		PUT_REG( REG_INTPEND, (1<<(pending>>2)));
+	}
+#else
+#error do_irq() not defined for this CPU type
+#endif
+}
+
+
+#ifdef CONFIG_S3C4510B
+static void default_isr( void *data) {
+	printf ("default_isr():  called for IRQ %d\n", (int)data);
 }
 
+static void timer_isr( void *data) {
+	unsigned int *pTime = (unsigned int *)data;
+
+	(*pTime)++;
+	if ( !(*pTime % (CFG_HZ/4))) {
+		/* toggle LED 0 */
+		PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
+	}
+
+}
+#endif
+
 static ulong timestamp;
 static ulong lastdec;
 
@@ -209,8 +248,48 @@ int interrupt_init (void)
 	/* set timer 1 counter */
 	lastdec = IO_TC1D = TIMER_LOAD_VAL;
 #elif defined(CONFIG_S3C4510B)
-	/* Nothing to do, interrupts not supported */
+	int i;
+
+	/* install default interrupt handlers */
+	for ( i = 0; i < N_IRQS; i++) {
+		IRQ_HANDLER[i].m_data = (void *)i;
+		IRQ_HANDLER[i].m_func = default_isr;
+	}
+
+	/* configure interrupts for IRQ mode */
+	PUT_REG( REG_INTMODE, 0x0);
+	/* clear any pending interrupts */
+	PUT_REG( REG_INTPEND, 0x1FFFFF);
+
 	lastdec = 0;
+
+	/* install interrupt handler for timer */
+	IRQ_HANDLER[INT_TIMER0].m_data = (void *)&timestamp;
+	IRQ_HANDLER[INT_TIMER0].m_func = timer_isr;
+
+	/* configure free running timer 0 */
+	PUT_REG( REG_TMOD, 0x0);
+	/* Stop timer 0 */
+	CLR_REG( REG_TMOD, TM0_RUN);
+
+	/* Configure for interval mode */
+	CLR_REG( REG_TMOD, TM1_TOGGLE);
+
+	/*
+	 * Load Timer data register with count down value.
+	 * count_down_val = CFG_SYS_CLK_FREQ/CFG_HZ
+	 */
+	PUT_REG( REG_TDATA0, (CFG_SYS_CLK_FREQ / CFG_HZ));
+
+	/*
+	 * Enable global interrupt
+	 * Enable timer0 interrupt
+	 */
+	CLR_REG( REG_INTMASK, ((1<<INT_GLOBAL) | (1<<INT_TIMER0)));
+
+	/* Start timer */
+	SET_REG( REG_TMOD, TM0_RUN);
+
 #else
 #error No interrupt_init() defined for this CPU type
 #endif
@@ -294,40 +373,22 @@ void udelay_masked (unsigned long usec)
 
 #elif defined(CONFIG_S3C4510B)
 
-#define TMR_OFFSET (0x1000)
+ulong get_timer (ulong base)
+{
+	return timestamp - base;
+}
 
 void udelay (unsigned long usec)
 {
-	u32 rDATA;
+	u32 ticks;
 
-	rDATA = t_data_us(usec);
+	ticks = (usec * CFG_HZ) / 1000000;
 
-	/* Stop timer 0 */
-	CLR_REG( REG_TMOD, TM0_RUN);
+	ticks += get_timer (0);
 
-	/* Configure for toggle mode */
-	SET_REG( REG_TMOD, TM0_TOGGLE);
-
-	/* Load Timer data register with count down value plus offset */
-	PUT_REG( REG_TDATA0, rDATA + TMR_OFFSET);
-
-	/* Clear timer counter register */
-	PUT_REG( REG_TCNT0, 0x0);
-
-	/* Start timer -- count down timer */
-	SET_REG( REG_TMOD, TM0_RUN);
-
-	/* spin during count down */
-	while ( GET_REG( REG_TCNT0) > TMR_OFFSET);
-
-	/* Stop timer */
-	CLR_REG( REG_TMOD, TM0_RUN);
-
-}
+	while (get_timer (0) < ticks)
+		/*NOP*/;
 
-ulong get_timer (ulong base)
-{
-	return (0xFFFFFFFF - GET_REG( REG_TCNT1)) - base;
 }
 
 #else

include/asm-arm/arch-arm720t/s3c4510b.h

@@ -210,6 +210,11 @@
 #define PUT__U8(reg, val)  (*((volatile u8  *)(reg)) = (( u8)((val)&0xFF)))
 #define GET__U8(reg)       (*((volatile u8  *)(reg)))
 
+#define PUT_LED(val)       (PUT_REG(REG_IOPDATA, (~val)&0xFF))
+#define GET_LED()          ((~GET_REG( REG_IOPDATA)) & 0xFF)
+#define SET_LED(val)       { u32 led = GET_LED(); led |= 1 << (val);  PUT_LED( led); }
+#define CLR_LED(val)       { u32 led = GET_LED(); led &= ~(1 << (val));  PUT_LED( led); }
+
 /***********************************/
 /* CLOCK CONSTANTS -- 50 MHz Clock */
 /***********************************/
@@ -228,4 +233,42 @@
 #define  TM1_TOGGLE   0x10  /* 0, interval mode */
 #define  TM1_OUT_1    0x20  /* Timer 0 Initial TOUT0 value */
 
+
+/*********************************/
+/* INTERRUPT SOURCES             */
+/*********************************/
+#define INT_EXTINT0	0
+#define INT_EXTINT1	1
+#define INT_EXTINT2	2
+#define INT_EXTINT3	3
+#define INT_UARTTX0	4
+#define INT_UARTRX0	5
+#define INT_UARTTX1	6
+#define INT_UARTRX1	7
+#define INT_GDMA0	8
+#define INT_GDMA1	9
+#define INT_TIMER0	10
+#define INT_TIMER1	11
+#define INT_HDLCTXA	12
+#define INT_HDLCRXA	13
+#define INT_HDLCTXB	14
+#define INT_HDLCRXB	15
+#define INT_BDMATX	16
+#define INT_BDMARX	17
+#define INT_MACTX	18
+#define INT_MACRX	19
+#define INT_IIC		20
+#define INT_GLOBAL	21
+#define N_IRQS         (21)
+
+#ifndef __ASSEMBLER__
+struct _irq_handler {
+	void                *m_data;
+	void (*m_func)( void *data);
+};
+
+extern struct _irq_handler IRQ_HANDLER[];
+
+#endif
+
 #endif /* __S3C4510_h */

include/configs/evb4510.h

@@ -44,7 +44,9 @@
 #define CONFIG_S3C4510B		1	/* it's a S3C4510B chip	 */
 #define CONFIG_EVB4510		1	/* on an EVB4510 Board	 */
 
-#undef CONFIG_USE_IRQ			/* don't need them anymore */
+#define CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ    (4*1024)
+#define CONFIG_STACKSIZE_FIQ    (4*1024)
 
 /*
  * Size of malloc() pool
@@ -63,7 +65,7 @@
 /*
  * select serial console configuration
  */
-#define CONFIG_SERIAL1		2	/* we use Serial line 2, could also use 1 */
+#define CONFIG_SERIAL1		1	/* we use Serial line 1, could also use 2 */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -83,10 +85,9 @@
 #define CONFIG_SERVERIP		10.0.0.1
 #define CONFIG_CMDLINE_TAG	/* submit bootargs to kernel */
 
-/*#define CONFIG_BOOTDELAY	10*/
-/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */
-#define CONFIG_BOOTCOMMAND	"bootm 0x10020000 0x100a0000"
-#define CONFIG_BOOTARGS		"console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd"
+#define CONFIG_BOOTDELAY	2
+#define CONFIG_BOOTCOMMAND	"tftp 100000 uImage"
+/* #define CONFIG_BOOTARGS    	"console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	19200		/* speed to run kgdb serial port */
@@ -103,6 +104,10 @@
 #define CFG_MAXARGS		16		/* max number of command args */
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
 
+#define CONFIG_CMDLINE_TAG                      /* allow passing of command line args to linux */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
 #define CFG_MEMTEST_START	0x00000000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x00780000	/* 4 ... 8 MB in DRAM	*/
 
@@ -110,7 +115,8 @@
 
 #define CFG_LOAD_ADDR		0x00000000	/* default load address */
 
-#define CFG_HZ			50000000	/* decrementer freq: 50 MHz */
+#define CFG_SYS_CLK_FREQ	50000000	/* CPU freq: 50 MHz */
+#define CFG_HZ			1000		/* decrementer freq: 1 KHz */
 
 						/* valid baudrates */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
@@ -159,6 +165,6 @@
 
 #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x20000) /* environment start address */
 #define CFG_ENV_SECT_SIZE	0x10000	   /* Total Size of Environment Sector */
-#define CFG_ENV_SIZE		0x4000	   /* max size for environment */
+#define CFG_ENV_SIZE		0x1000	   /* max size for environment */
 
 #endif	/* __CONFIG_H */

include/configs/omap1610h2.h

@@ -40,6 +40,7 @@
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP1610		1	/* which is in a 1610 */
 #define CONFIG_H2_OMAP1610	1	/* on an H2 Board */
+#define CONFIG_MACH_OMAP_H2		/* Select board mach-type */
 
 /* input clock of PLL */
 /* the OMAP1610 H2 has 12MHz input clock */

include/configs/omap1610inn.h

@@ -40,6 +40,7 @@
 #define CONFIG_OMAP	1			/* in a TI OMAP core    */
 #define CONFIG_OMAP1610	1		/* which is in a 1610  */
 #define CONFIG_INNOVATOROMAP1610	1	/*  a Innovator Board  */
+#define CONFIG_MACH_OMAP_INNOVATOR	/* Select board mach-type */
 
 /* input clock of PLL */
 /* the OMAP1610 Innovator has 12MHz input clock */

lib_arm/armlinux.c

@@ -166,13 +166,13 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 			do_reset (cmdtp, flag, argc, argv);
 		}
 
-#ifdef CONFIG_B2
+#if defined(CONFIG_B2) || defined(CONFIG_EVB4510)
 		/*
 		 *we need to copy the ramdisk to SRAM to let Linux boot
 		 */
 		memmove ((void *) ntohl(hdr->ih_load), (uchar *)data, len);
 		data = ntohl(hdr->ih_load);
-#endif /* CONFIG_B2 */
+#endif /* CONFIG_B2 || CONFIG_EVB4510 */
 
 		/*
 		 * Now check if we have a multifile image