diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h index ee28323..d7d527d 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h @@ -8,11 +8,11 @@ #define __FSL_STREAM_ID_H /* - * Stream IDs on ls2080a devices are not hardwired and are - * programmed by sw. There are a limited number of stream IDs - * available, and the partitioning of them is scenario dependent. - * This header defines the partitioning between legacy, PCI, - * and DPAA2 devices. + * Stream IDs on NXP Chassis-3 (for example ls2080a, ls1088a, ls2088a) + * devices are not hardwired and are programmed by sw. There are a limited + * number of stream IDs available, and the partitioning of them is scenario + * dependent. This header defines the partitioning between legacy, + * PCI, and DPAA2 devices. * * This partitioning can be customized in this file depending * on the specific hardware config: @@ -29,6 +29,9 @@ * -set a msi-map entry in the PEXn controller node in the * device tree (see Documentation/devicetree/bindings/pci/pci-msi.txt * for more info on the msi-map definition) + * -set a iommu-map entry in the PEXn controller node in the + * device tree (see Documentation/devicetree/bindings/pci/pci-iommu.txt + * for more info on the iommu-map definition) * * -DPAA2 * -u-boot will allocate a range of stream IDs to be used by the Management @@ -36,7 +39,7 @@ * -the MC is responsible for allocating and setting up 'isolation context * IDs (ICIDs) based on the allocated stream IDs for all DPAA2 devices. * - * On ls2080a SoCs stream IDs are programmed in AMQ registers (32-bits) for + * On Chasis-3 SoCs stream IDs are programmed in AMQ registers (32-bits) for * each of the different bus masters. The relationship between * the AMQ registers and stream IDs is defined in the table below: * AMQ bit streamID bit