From 0267ba5d869cdc482c0b947ef8de89ce7403ac8c Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 30 Jan 2015 10:51:46 +0100
Subject: [PATCH 01/20] common: Move dram_init() declaration to common location

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---
 arch/arm/include/asm/u-boot-arm.h         | 1 -
 arch/nds32/include/asm/u-boot-nds32.h     | 1 -
 arch/sandbox/include/asm/u-boot-sandbox.h | 1 -
 arch/x86/include/asm/u-boot-x86.h         | 6 ------
 include/common.h                          | 1 +
 5 files changed, 1 insertion(+), 9 deletions(-)

diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h
index f97f3dd..414042d 100644
--- a/arch/arm/include/asm/u-boot-arm.h
+++ b/arch/arm/include/asm/u-boot-arm.h
@@ -36,7 +36,6 @@ int	arch_early_init_r(void);
 
 /* board/.../... */
 int	board_init(void);
-int	dram_init (void);
 void	dram_init_banksize (void);
 
 /* cpu/.../interrupt.c */
diff --git a/arch/nds32/include/asm/u-boot-nds32.h b/arch/nds32/include/asm/u-boot-nds32.h
index b079086..dee5f43 100644
--- a/arch/nds32/include/asm/u-boot-nds32.h
+++ b/arch/nds32/include/asm/u-boot-nds32.h
@@ -22,7 +22,6 @@ int	cleanup_before_linux(void);
 
 /* board/.../... */
 int	board_init(void);
-int	dram_init(void);
 
 /* cpu/.../interrupt.c */
 void	reset_timer_masked(void);
diff --git a/arch/sandbox/include/asm/u-boot-sandbox.h b/arch/sandbox/include/asm/u-boot-sandbox.h
index d2f1b65..770ab5c 100644
--- a/arch/sandbox/include/asm/u-boot-sandbox.h
+++ b/arch/sandbox/include/asm/u-boot-sandbox.h
@@ -17,7 +17,6 @@
 
 /* board/.../... */
 int board_init(void);
-int dram_init(void);
 
 /* start.c */
 int sandbox_early_getopt_check(void);
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
index b98afa8..c24846b 100644
--- a/arch/x86/include/asm/u-boot-x86.h
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -26,15 +26,9 @@ unsigned long get_tbclk_mhz(void);
 void timer_set_base(uint64_t base);
 int pcat_timer_init(void);
 
-/* Architecture specific DRAM init */
-int dram_init(void);
-
 /* cpu/.../interrupts.c */
 int cpu_init_interrupts(void);
 
-/* board/.../... */
-int dram_init(void);
-
 int cleanup_before_linux(void);
 int x86_cleanup_before_linux(void);
 void x86_enable_caches(void);
diff --git a/include/common.h b/include/common.h
index 97c8f79..9129454 100644
--- a/include/common.h
+++ b/include/common.h
@@ -183,6 +183,7 @@ typedef void (interrupt_handler_t)(void *);
 /*
  * Function Prototypes
  */
+int dram_init(void);
 
 void	hang		(void) __attribute__ ((noreturn));
 

From 61d7b1bb5fb35c49e7391d511a282295949f260b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= <andreas.devel@googlemail.com>
Date: Tue, 20 Jan 2015 00:29:05 +0100
Subject: [PATCH 02/20] common/board_r: manual relocation for cmd table
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is required for architectures still need manual relocation like avr32, mk68
and others.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
---
 common/board_r.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/common/board_r.c b/common/board_r.c
index 68a9448..f7a3b55 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -294,6 +294,15 @@ static int initr_announce(void)
 	return 0;
 }
 
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+static int initr_manual_reloc_cmdtable(void)
+{
+	fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+		       ll_entry_count(cmd_tbl_t, cmd));
+	return 0;
+}
+#endif
+
 #if !defined(CONFIG_SYS_NO_FLASH)
 static int initr_flash(void)
 {
@@ -702,6 +711,9 @@ init_fnc_t init_sequence_r[] = {
 	initr_serial,
 	initr_announce,
 	INIT_FUNC_WATCHDOG_RESET
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+	initr_manual_reloc_cmdtable,
+#endif
 #ifdef CONFIG_PPC
 	initr_trap,
 #endif

From cd8574c0a7b087e85b464779ab5d486644d5013b Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 26 Jan 2015 14:24:08 +0100
Subject: [PATCH 03/20] microblaze: Fix stack usage in interrupt handler

Do not save registers below r1 stack pointer because
it is not checked by stack undeflow is not able to detect
it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/irq.S | 121 +++++++++++++++++++++++-----------------------
 1 file changed, 60 insertions(+), 61 deletions(-)

diff --git a/arch/microblaze/cpu/irq.S b/arch/microblaze/cpu/irq.S
index 2401589..5cfe151 100644
--- a/arch/microblaze/cpu/irq.S
+++ b/arch/microblaze/cpu/irq.S
@@ -11,71 +11,70 @@
 	.text
 	.global _interrupt_handler
 _interrupt_handler:
-	swi	r2, r1, -4
-	swi	r3, r1, -8
-	swi	r4, r1, -12
-	swi	r5, r1, -16
-	swi	r6, r1, -20
-	swi	r7, r1, -24
-	swi	r8, r1, -28
-	swi	r9, r1, -32
-	swi	r10, r1, -36
-	swi	r11, r1, -40
-	swi	r12, r1, -44
-	swi	r13, r1, -48
-	swi	r14, r1, -52
-	swi	r15, r1, -56
-	swi	r16, r1, -60
-	swi	r17, r1, -64
-	swi	r18, r1, -68
-	swi	r19, r1, -72
-	swi	r20, r1, -76
-	swi	r21, r1, -80
-	swi	r22, r1, -84
-	swi	r23, r1, -88
-	swi	r24, r1, -92
-	swi	r25, r1, -96
-	swi	r26, r1, -100
-	swi	r27, r1, -104
-	swi	r28, r1, -108
-	swi	r29, r1, -112
-	swi	r30, r1, -116
-	swi	r31, r1, -120
 	addik	r1, r1, -124
+	swi	r2, r1, 4
+	swi	r3, r1, 8
+	swi	r4, r1, 12
+	swi	r5, r1, 16
+	swi	r6, r1, 20
+	swi	r7, r1, 24
+	swi	r8, r1, 28
+	swi	r9, r1, 32
+	swi	r10, r1, 36
+	swi	r11, r1, 40
+	swi	r12, r1, 44
+	swi	r13, r1, 48
+	swi	r14, r1, 52
+	swi	r15, r1, 56
+	swi	r16, r1, 60
+	swi	r17, r1, 64
+	swi	r18, r1, 68
+	swi	r19, r1, 72
+	swi	r20, r1, 76
+	swi	r21, r1, 80
+	swi	r22, r1, 84
+	swi	r23, r1, 88
+	swi	r24, r1, 92
+	swi	r25, r1, 96
+	swi	r26, r1, 100
+	swi	r27, r1, 104
+	swi	r28, r1, 108
+	swi	r29, r1, 112
+	swi	r30, r1, 116
+	swi	r31, r1, 120
 	brlid	r15, interrupt_handler
 	nop
+	lwi	r31, r1, 120
+	lwi	r30, r1, 116
+	lwi	r29, r1, 112
+	lwi	r28, r1, 108
+	lwi	r27, r1, 104
+	lwi	r26, r1, 100
+	lwi	r25, r1, 96
+	lwi	r24, r1, 92
+	lwi	r23, r1, 88
+	lwi	r22, r1, 84
+	lwi	r21, r1, 80
+	lwi	r20, r1, 76
+	lwi	r19, r1, 72
+	lwi	r18, r1, 68
+	lwi	r17, r1, 64
+	lwi	r16, r1, 60
+	lwi	r15, r1, 56
+	lwi	r14, r1, 52
+	lwi	r13, r1, 48
+	lwi	r12, r1, 44
+	lwi	r11, r1, 40
+	lwi	r10, r1, 36
+	lwi	r9, r1, 32
+	lwi	r8, r1, 28
+	lwi	r7, r1, 24
+	lwi	r6, r1, 20
+	lwi	r5, r1, 16
+	lwi	r4, r1, 12
+	lwi	r3, r1, 8
+	lwi	r2, r1, 4
 	addik	r1, r1, 124
-	lwi	r31, r1, -120
-	lwi	r30, r1, -116
-	lwi	r29, r1, -112
-	lwi	r28, r1, -108
-	lwi	r27, r1, -104
-	lwi	r26, r1, -100
-	lwi	r25, r1, -96
-	lwi	r24, r1, -92
-	lwi	r23, r1, -88
-	lwi	r22, r1, -84
-	lwi	r21, r1, -80
-	lwi	r20, r1, -76
-	lwi	r19, r1, -72
-	lwi	r18, r1, -68
-	lwi	r17, r1, -64
-	lwi	r16, r1, -60
-	lwi	r15, r1, -56
-	lwi	r14, r1, -52
-	lwi	r13, r1, -48
-	lwi	r12, r1, -44
-	lwi	r11, r1, -40
-	lwi	r10, r1, -36
-	lwi	r9, r1, -32
-	lwi	r8, r1, -28
-	lwi	r7, r1, -24
-	lwi	r6, r1, -20
-	lwi	r5, r1, -16
-	lwi	r4, r1, -12
-	lwi	r3, r1, -8
-	lwi	r2, r1, -4
-
 	rtid	r14, 0
 	nop
 	.size _interrupt_handler,.-_interrupt_handler

From 1c424d26975345dec30e525319056cdb2280b170 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 26 Jan 2015 14:32:23 +0100
Subject: [PATCH 04/20] microblaze: Show return address from exception

Show also return address from exception which should
suggest where the problem is.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/exception.c   | 2 ++
 arch/microblaze/include/asm/asm.h | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/arch/microblaze/cpu/exception.c b/arch/microblaze/cpu/exception.c
index 227842f..4572933 100644
--- a/arch/microblaze/cpu/exception.c
+++ b/arch/microblaze/cpu/exception.c
@@ -18,6 +18,8 @@ void _hw_exception_handler (void)
 	/* loading excetpion state register ESR */
 	MFS (state, resr);
 	printf ("Hardware exception at 0x%x address\n", address);
+	R17(address);
+	printf("Return address from exception 0x%x\n", address);
 	switch (state & 0x1f) {	/* mask on exception cause */
 	case 0x1:
 		puts ("Unaligned data access exception\n");
diff --git a/arch/microblaze/include/asm/asm.h b/arch/microblaze/include/asm/asm.h
index c1c3b03..11f3dd0 100644
--- a/arch/microblaze/include/asm/asm.h
+++ b/arch/microblaze/include/asm/asm.h
@@ -43,6 +43,10 @@
 #define R14(val) \
 	__asm__ __volatile__ ("addi %0, r14, 0":"=r" (val));
 
+/* get return address from interrupt */
+#define R17(val) \
+	__asm__ __volatile__ ("addi %0, r17, 0" : "=r" (val));
+
 #define NOP	__asm__ __volatile__ ("nop");
 
 /* use machine status registe USE_MSR_REG */

From 5e2fc801ff2da9f799b0ad416a379c25aa7b7fe8 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 26 Jan 2015 14:36:13 +0100
Subject: [PATCH 05/20] microblaze: Fix coding style in exception.c

Just coding style cleanup - no functional changes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/exception.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/arch/microblaze/cpu/exception.c b/arch/microblaze/cpu/exception.c
index 4572933..aa34f45 100644
--- a/arch/microblaze/cpu/exception.c
+++ b/arch/microblaze/cpu/exception.c
@@ -13,51 +13,52 @@ void _hw_exception_handler (void)
 {
 	int address = 0;
 	int state = 0;
+
 	/* loading address of exception EAR */
-	MFS (address, rear);
+	MFS(address, rear);
 	/* loading excetpion state register ESR */
-	MFS (state, resr);
-	printf ("Hardware exception at 0x%x address\n", address);
+	MFS(state, resr);
+	printf("Hardware exception at 0x%x address\n", address);
 	R17(address);
 	printf("Return address from exception 0x%x\n", address);
 	switch (state & 0x1f) {	/* mask on exception cause */
 	case 0x1:
-		puts ("Unaligned data access exception\n");
+		puts("Unaligned data access exception\n");
 		break;
 	case 0x2:
-		puts ("Illegal op-code exception\n");
+		puts("Illegal op-code exception\n");
 		break;
 	case 0x3:
-		puts ("Instruction bus error exception\n");
+		puts("Instruction bus error exception\n");
 		break;
 	case 0x4:
-		puts ("Data bus error exception\n");
+		puts("Data bus error exception\n");
 		break;
 	case 0x5:
-		puts ("Divide by zero exception\n");
+		puts("Divide by zero exception\n");
 		break;
 #ifdef MICROBLAZE_V5
 	case 0x7:
 		puts("Priviledged or stack protection violation exception\n");
 		break;
 	case 0x1000:
-		puts ("Exception in delay slot\n");
+		puts("Exception in delay slot\n");
 		break;
 #endif
 	default:
-		puts ("Undefined cause\n");
+		puts("Undefined cause\n");
 		break;
 	}
-	printf ("Unaligned %sword access\n", ((state & 0x800) ? "" : "half"));
-	printf ("Unaligned %s access\n", ((state & 0x400) ? "store" : "load"));
-	printf ("Register R%x\n", (state & 0x3E) >> 5);
-	hang ();
+	printf("Unaligned %sword access\n", ((state & 0x800) ? "" : "half"));
+	printf("Unaligned %s access\n", ((state & 0x400) ? "store" : "load"));
+	printf("Register R%x\n", (state & 0x3E) >> 5);
+	hang();
 }
 
 #ifdef CONFIG_SYS_USR_EXCEP
 void _exception_handler (void)
 {
-	puts ("User vector_exception\n");
-	hang ();
+	puts("User vector_exception\n");
+	hang();
 }
 #endif

From 4c0922f367a652a59ee0fa768212ec3bd78953ee Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 26 Jan 2015 14:37:52 +0100
Subject: [PATCH 06/20] microblaze: Remove DEBUG_INT macro and use debug()
 instead

Do not use specific macros for debugging.
Also remove compilation warning:
w+../arch/microblaze/cpu/interrupts.c: In function 'interrupt_handler':
w+../arch/microblaze/cpu/interrupts.c:153:2: warning: format '%x'
expects argument of type 'unsigned int', but argument 2 has type 'void
(*)(void *)' [-Wformat]
w+../arch/microblaze/cpu/interrupts.c:153:2: warning: format '%x'
expects argument of type 'unsigned int', but argument 4 has type 'void
*' [-Wformat]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/interrupts.c | 57 ++++++++++++++++++----------------------
 1 file changed, 25 insertions(+), 32 deletions(-)

diff --git a/arch/microblaze/cpu/interrupts.c b/arch/microblaze/cpu/interrupts.c
index 9364e2f..030e914 100644
--- a/arch/microblaze/cpu/interrupts.c
+++ b/arch/microblaze/cpu/interrupts.c
@@ -14,8 +14,6 @@
 #include <asm/microblaze_intc.h>
 #include <asm/asm.h>
 
-#undef DEBUG_INT
-
 void enable_interrupts(void)
 {
 	MSRSET(0x2);
@@ -50,12 +48,11 @@ static void enable_one_interrupt(int irq)
 	offset <<= irq;
 	mask = intc->ier;
 	intc->ier = (mask | offset);
-#ifdef DEBUG_INT
-	printf("Enable one interrupt irq %x - mask %x,ier %x\n", offset, mask,
-		intc->ier);
-	printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
-		intc->iar, intc->mer);
-#endif
+
+	debug("Enable one interrupt irq %x - mask %x,ier %x\n", offset, mask,
+	      intc->ier);
+	debug("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
+	      intc->iar, intc->mer);
 }
 
 static void disable_one_interrupt(int irq)
@@ -66,12 +63,11 @@ static void disable_one_interrupt(int irq)
 	offset <<= irq;
 	mask = intc->ier;
 	intc->ier = (mask & ~offset);
-#ifdef DEBUG_INT
-	printf("Disable one interrupt irq %x - mask %x,ier %x\n", irq, mask,
-		intc->ier);
-	printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
-		intc->iar, intc->mer);
-#endif
+
+	debug("Disable one interrupt irq %x - mask %x,ier %x\n", irq, mask,
+	      intc->ier);
+	debug("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
+	      intc->iar, intc->mer);
 }
 
 int install_interrupt_handler(int irq, interrupt_handler_t *hdlr, void *arg)
@@ -107,10 +103,9 @@ static void intc_init(void)
 	intc->iar = 0xFFFFFFFF;
 	/* XIntc_Start - hw_interrupt enable and all interrupt enable */
 	intc->mer = 0x3;
-#ifdef DEBUG_INT
-	printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
-		intc->iar, intc->mer);
-#endif
+
+	debug("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
+	      intc->iar, intc->mer);
 }
 
 int interrupts_init(void)
@@ -147,31 +142,29 @@ void interrupt_handler(void)
 {
 	int irqs = intc->ivr;	/* find active interrupt */
 	int mask = 1;
-#ifdef DEBUG_INT
 	int value;
-	printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
-		intc->iar, intc->mer);
-	R14(value);
-	printf ("Interrupt handler on %x line, r14 %x\n", irqs, value);
-#endif
 	struct irq_action *act = vecs + irqs;
 
-#ifdef DEBUG_INT
-	printf
-	    ("Jumping to interrupt handler rutine addr %x,count %x,arg %x\n",
-	     act->handler, act->count, act->arg);
+	debug("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
+	      intc->iar, intc->mer);
+#ifdef DEBUG
+	R14(value);
 #endif
+	debug("Interrupt handler on %x line, r14 %x\n", irqs, value);
+
+	debug("Jumping to interrupt handler rutine addr %x,count %x,arg %x\n",
+	      (u32)act->handler, act->count, (u32)act->arg);
 	act->handler (act->arg);
 	act->count++;
 
 	intc->iar = mask << irqs;
 
-#ifdef DEBUG_INT
-	printf ("Dump INTC reg, isr %x, ier %x, iar %x, mer %x\n", intc->isr,
-		intc->ier, intc->iar, intc->mer);
+	debug("Dump INTC reg, isr %x, ier %x, iar %x, mer %x\n", intc->isr,
+	      intc->ier, intc->iar, intc->mer);
+#ifdef DEBUG
 	R14(value);
-	printf ("Interrupt handler on %x line, r14 %x\n", irqs, value);
 #endif
+	debug("Interrupt handler on %x line, r14 %x\n", irqs, value);
 }
 
 #if defined(CONFIG_CMD_IRQ)

From e217b0d50dd38e0fffb1168d9eaf64086bcb3b51 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 26 Jan 2015 14:39:22 +0100
Subject: [PATCH 07/20] microblaze: Fix coding style

No functional changes just to pass checkpatch.pl.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/interrupts.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/microblaze/cpu/interrupts.c b/arch/microblaze/cpu/interrupts.c
index 030e914..771bbd0 100644
--- a/arch/microblaze/cpu/interrupts.c
+++ b/arch/microblaze/cpu/interrupts.c
@@ -84,12 +84,12 @@ int install_interrupt_handler(int irq, interrupt_handler_t *hdlr, void *arg)
 		act->handler = hdlr;
 		act->arg = arg;
 		act->count = 0;
-		enable_one_interrupt (irq);
+		enable_one_interrupt(irq);
 		return 0;
 	}
 
 	/* Disable */
-	act->handler = (interrupt_handler_t *) def_hdlr;
+	act->handler = (interrupt_handler_t *)def_hdlr;
 	act->arg = (void *)irq;
 	disable_one_interrupt(irq);
 	return 1;
@@ -113,7 +113,7 @@ int interrupts_init(void)
 	int i;
 
 #if defined(CONFIG_SYS_INTC_0_ADDR) && defined(CONFIG_SYS_INTC_0_NUM)
-	intc = (microblaze_intc_t *) (CONFIG_SYS_INTC_0_ADDR);
+	intc = (microblaze_intc_t *)CONFIG_SYS_INTC_0_ADDR;
 	irq_no = CONFIG_SYS_INTC_0_NUM;
 #endif
 	if (irq_no) {
@@ -125,7 +125,7 @@ int interrupts_init(void)
 
 		/* initialize irq list */
 		for (i = 0; i < irq_no; i++) {
-			vecs[i].handler = (interrupt_handler_t *) def_hdlr;
+			vecs[i].handler = (interrupt_handler_t *)def_hdlr;
 			vecs[i].arg = (void *)i;
 			vecs[i].count = 0;
 		}
@@ -154,7 +154,7 @@ void interrupt_handler(void)
 
 	debug("Jumping to interrupt handler rutine addr %x,count %x,arg %x\n",
 	      (u32)act->handler, act->count, (u32)act->arg);
-	act->handler (act->arg);
+	act->handler(act->arg);
 	act->count++;
 
 	intc->iar = mask << irqs;
@@ -179,10 +179,10 @@ int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, const char *argv[])
 		      "-----------------------------\n");
 
 		for (i = 0; i < irq_no; i++) {
-			if (act->handler != (interrupt_handler_t *) def_hdlr) {
+			if (act->handler != (interrupt_handler_t *)def_hdlr) {
 				printf("%02d  %08x  %08x  %d\n", i,
-					(int)act->handler, (int)act->arg,
-								act->count);
+				       (int)act->handler, (int)act->arg,
+				       act->count);
 			}
 			act++;
 		}

From 070b8e0da23ab344153d3d1d1b5ef6caac3134dd Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 26 Jan 2015 15:25:32 +0100
Subject: [PATCH 08/20] microblaze: Add debug message about enabling interrupts

Add one more debug message about enabling global interrupts.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/interrupts.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/microblaze/cpu/interrupts.c b/arch/microblaze/cpu/interrupts.c
index 771bbd0..f66ec69 100644
--- a/arch/microblaze/cpu/interrupts.c
+++ b/arch/microblaze/cpu/interrupts.c
@@ -16,6 +16,7 @@
 
 void enable_interrupts(void)
 {
+	debug("Enable interrupts for the whole CPU\n");
 	MSRSET(0x2);
 }
 

From 7c6814f184ca455f45684cbcbf108596ecbe00c6 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 26 Jan 2015 15:52:48 +0100
Subject: [PATCH 09/20] microblaze: Remove unneeded data section adding from
 DTB

DTB is added to rodata section:
  [ 2] .rodata           PROGBITS        84c5b60c 05c60c 00c618 00   A
0   0  4
  [ 3] .dtb.init.rodata  PROGBITS        84c67c30 068c30 003c80 00   A
0   0 16
  [ 4] .rela.dyn         RELA            84c6b8b0 06c8b0 000534 0c   A
0   0  4
  [ 5] .data             PROGBITS        84c6bde4 06cde4 001536 00  WA
0   0 16

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/u-boot.lds | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds
index fdad207..44bc036 100644
--- a/arch/microblaze/cpu/u-boot.lds
+++ b/arch/microblaze/cpu/u-boot.lds
@@ -29,9 +29,6 @@ SECTIONS
 	.data ALIGN(0x4):
 	{
 		__data_start = .;
-#ifdef CONFIG_OF_EMBED
-		dts/built-in.o (.data)
-#endif
 		*(.data)
 		__data_end = .;
 	}

From 2c7c32fa7f025a87cfdb4afce4a6dda78a8c5582 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 27 Jan 2015 12:44:12 +0100
Subject: [PATCH 10/20] microblaze: Use standard interrupt_init() function

Do not use microblaze specific interrupt init function.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/interrupts.c              | 2 +-
 arch/microblaze/include/asm/microblaze_intc.h | 2 --
 arch/microblaze/lib/board.c                   | 2 +-
 3 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/microblaze/cpu/interrupts.c b/arch/microblaze/cpu/interrupts.c
index f66ec69..b6d6610 100644
--- a/arch/microblaze/cpu/interrupts.c
+++ b/arch/microblaze/cpu/interrupts.c
@@ -109,7 +109,7 @@ static void intc_init(void)
 	      intc->iar, intc->mer);
 }
 
-int interrupts_init(void)
+int interrupt_init(void)
 {
 	int i;
 
diff --git a/arch/microblaze/include/asm/microblaze_intc.h b/arch/microblaze/include/asm/microblaze_intc.h
index 0fb9207..6586838 100644
--- a/arch/microblaze/include/asm/microblaze_intc.h
+++ b/arch/microblaze/include/asm/microblaze_intc.h
@@ -34,5 +34,3 @@ struct irq_action {
  */
 int install_interrupt_handler(int irq, interrupt_handler_t *hdlr,
 				       void *arg);
-
-int interrupts_init(void);
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
index 600c80a..bd028a6 100644
--- a/arch/microblaze/lib/board.c
+++ b/arch/microblaze/lib/board.c
@@ -55,7 +55,7 @@ init_fnc_t *init_sequence[] = {
 #endif
 	display_banner,
 #ifndef CONFIG_SPL_BUILD
-	interrupts_init,
+	interrupt_init,
 	timer_init,
 #endif
 	NULL,

From e4a4743e487f758cfc37528a8d6d4066cf781bc6 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 27 Jan 2015 12:46:07 +0100
Subject: [PATCH 11/20] microblaze: Remove unused asm label

It is not used at all that's why remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/start.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 84c29e5..e0e3470 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -129,7 +129,7 @@ _start:
 	/* Flush cache before enable cache */
 	addik	r5, r0, 0
 	addik	r6, r0, XILINX_DCACHE_BYTE_SIZE
-flush:	bralid r15, flush_cache
+	bralid r15, flush_cache
 	nop
 
 	/* enable instruction and data cache */

From 9cef20b10929d7ad047b071c3dcb924401bf78e8 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 27 Jan 2015 14:06:14 +0100
Subject: [PATCH 12/20] microblaze: Fix gd_t address which is placed at the end
 of BRAM

Setup gd from ASM to be availalbe for board_init_r.
Setting it up in spl_board_init is too late when
MALLOC is used.
Space for gd is located behind MALLOC area at the end of BRAM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/spl.c   | 2 --
 arch/microblaze/cpu/start.S | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/microblaze/cpu/spl.c b/arch/microblaze/cpu/spl.c
index 0912261..2cc0a2d 100644
--- a/arch/microblaze/cpu/spl.c
+++ b/arch/microblaze/cpu/spl.c
@@ -25,8 +25,6 @@ u32 spl_boot_device(void)
 /* Board initialization after bss clearance */
 void spl_board_init(void)
 {
-	gd = (gd_t *)CONFIG_SPL_STACK_ADDR;
-
 	/* enable console uart printing */
 	preloader_console_init();
 }
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index e0e3470..14c2f12 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -152,6 +152,7 @@ clear_bss:
 #ifndef CONFIG_SPL_BUILD
 	brai	board_init_f
 #else
+	addi	r31, r0, CONFIG_SYS_SPL_MALLOC_END
 	brai	board_init_r
 #endif
 1:	bri	1b

From 4dd097427aeb6848fcb19c31b805abe1a3906913 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 27 Jan 2015 14:25:38 +0100
Subject: [PATCH 13/20] microblaze: Enable SPL_NOR support when FLASH_BASE is
 setup

Simplify SPL NOR init.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 include/configs/microblaze-generic.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index bb07060..2e1e642 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -452,7 +452,10 @@
 #define CONFIG_SPL_LDSCRIPT	"arch/microblaze/cpu/u-boot-spl.lds"
 
 #define CONFIG_SPL_RAM_DEVICE
-#define CONFIG_SPL_NOR_SUPPORT
+#ifdef CONFIG_SYS_FLASH_BASE
+# define CONFIG_SPL_NOR_SUPPORT
+# define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
+#endif
 
 /* for booting directly linux */
 #define CONFIG_SPL_OS_BOOT
@@ -491,7 +494,6 @@
 /* Just for sure that there is a space for stack */
 #define CONFIG_SPL_STACK_SIZE		0x100
 
-#define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_UBOOT_START		CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_INIT_RAM_SIZE - \

From e945f6dc2814f5f0d30b5b7e23821b3fd4faff5b Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Thu, 8 May 2014 16:08:44 +0200
Subject: [PATCH 14/20] microblaze: Move architecture to use generic board init

Compile code with -fPIC to get GOT. Do not build SPL
with fPIC because it increasing SPL size for nothing.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/config.mk                          |   5 +
 arch/microblaze/cpu/start.S                        | 103 +++++++++++
 arch/microblaze/cpu/u-boot.lds                     |   9 +
 arch/microblaze/include/asm/config.h               |   8 +
 arch/microblaze/include/asm/u-boot.h               |  11 +-
 arch/microblaze/lib/Makefile                       |   1 -
 arch/microblaze/lib/board.c                        | 201 ---------------------
 .../xilinx/microblaze-generic/microblaze-generic.c |  46 +++++
 common/board_f.c                                   |   4 +-
 common/board_r.c                                   |   2 +-
 common/cmd_bdinfo.c                                |  13 +-
 include/configs/microblaze-generic.h               |  64 +------
 12 files changed, 195 insertions(+), 272 deletions(-)
 delete mode 100644 arch/microblaze/lib/board.c

diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk
index 98bbf79..2b817be 100644
--- a/arch/microblaze/config.mk
+++ b/arch/microblaze/config.mk
@@ -15,3 +15,8 @@ endif
 CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000
 
 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__
+
+ifeq ($(CONFIG_SPL_BUILD),)
+PLATFORM_CPPFLAGS += -fPIC
+endif
+__HAVE_ARCH_GENERIC_BOARD := y
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 14c2f12..3de0e12 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -150,6 +150,7 @@ clear_bss:
 	bnei    r6, 2b
 3:	/* jumping to board_init */
 #ifndef CONFIG_SPL_BUILD
+	or	r5, r0, r0	/* flags - empty */
 	brai	board_init_f
 #else
 	addi	r31, r0, CONFIG_SYS_SPL_MALLOC_END
@@ -190,4 +191,106 @@ out16:	bslli	r3, r6, 8
 	rtsd	r15, 8
 	or	r0, r0, r0
 	.end	out16
+
+/*
+ * Relocate u-boot
+ */
+	.text
+	.global	relocate_code
+	.ent	relocate_code
+	.align	2
+relocate_code:
+	/*
+	 * r5 - start_addr_sp
+	 * r6 - new_gd
+	 * r7 - reloc_addr
+	 */
+	addi	r1, r5, 0 /* Start to use new SP */
+	addi	r31, r6, 0 /* Start to use new GD */
+
+	add	r23, r0, r7 /* Move reloc addr to r23 */
+	/* Relocate text and data - r12 temp value */
+	addi	r21, r0, _start
+	addi	r22, r0, __end - 4 /* Include BSS too */
+1:	lwi	r12, r21, 0 /* Load u-boot data */
+	swi	r12, r23, 0 /* Write zero to loc */
+	addi	r21, r21, 4 /* Increment to next loc - origin code */
+	cmp	r12, r21, r22 /* Check if we have reach the end */
+	bneid	r12, 1b
+	addi	r23, r23, 4 /* Increment to next loc - relocate code */
+
+       /* R23 points to the base address. */
+	add	r23, r0, r7 /* Move reloc addr to r23 */
+	addi	r24, r0, CONFIG_SYS_TEXT_BASE /* Get reloc offset */
+	rsub	r23, r24, r23 /* keep - this is already here gd->reloc_off */
+
+	addik	r6, r0, 0x2 /* BIG/LITTLE endian offset */
+	lwi	r7, r0, 0x28
+	swi	r6, r0, 0x28 /* used first unused MB vector */
+	lbui	r10, r0, 0x28 /* used first unused MB vector */
+	swi	r7, r0, 0x28
+
+#ifdef CONFIG_SYS_USR_EXCEP
+	addik	r6, r0, _exception_handler
+	addk	r6, r6, r23 /* add offset */
+	sw	r6, r1, r0
+	lhu	r7, r1, r10
+	rsubi	r8, r10, 0xa
+	sh	r7, r0, r8
+	rsubi	r8, r10, 0xe
+	sh	r6, r0, r8
+#endif
+	addik	r6, r0, _hw_exception_handler
+	addk	r6, r6, r23 /* add offset */
+	sw	r6, r1, r0
+	lhu	r7, r1, r10
+	rsubi	r8, r10, 0x22
+	sh	r7, r0, r8
+	rsubi	r8, r10, 0x26
+	sh	r6, r0, r8
+
+	addik	r6, r0, _interrupt_handler
+	addk	r6, r6, r23 /* add offset */
+	sw	r6, r1, r0
+	lhu	r7, r1, r10
+	rsubi	r8, r10, 0x12
+	sh	r7, r0, r8
+	rsubi	r8, r10, 0x16
+	sh	r6, r0, r8
+
+	/* Check if GOT exist */
+	addik	r21, r23, _got_start
+	addik	r22, r23, _got_end
+	cmpu	r12, r21, r22
+	beqi	r12, 2f /* No GOT table - jump over */
+
+	/* Skip last 3 entries plus 1 because of loop boundary below */
+	addik	r22, r22, -0x10
+
+        /* Relocate the GOT. */
+3:	lw	r12, r21, r0 /* Load entry */
+	addk	r12, r12, r23 /* Add reloc offset */
+	sw	r12, r21, r0 /* Save entry back */
+
+	cmpu	r12, r21, r22 /* Check if this cross boundary */
+	bneid	r12, 3b
+	addik	r21. r21, 4
+
+	/* Update pointer to GOT */
+	mfs	r20, rpc
+	addik	r20, r20, _GLOBAL_OFFSET_TABLE_ + 8
+	addk	r20, r20, r23
+
+	/* Flush caches to ensure consistency */
+	addik	r5, r0, 0
+	addik	r6, r0, XILINX_DCACHE_BYTE_SIZE
+	bralid	r15, flush_cache
+	nop
+
+2:	addi	r5, r31, 0 /* gd is initialized in board_r.c */
+	addi	r6, r0, CONFIG_SYS_TEXT_BASE
+	addi	r12, r23, board_init_r
+	bra	r12 /* Jump to relocated code */
+
+	.end	relocate_code
 #endif
diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds
index 44bc036..2502a0d 100644
--- a/arch/microblaze/cpu/u-boot.lds
+++ b/arch/microblaze/cpu/u-boot.lds
@@ -33,10 +33,19 @@ SECTIONS
 		__data_end = .;
 	}
 
+	.got ALIGN(4):
+	{
+		_got_start = .;
+		*(.got*)
+		. = ALIGN(4);
+		_got_end = .;
+	}
+
 	. = ALIGN(4);
 	.u_boot_list : {
 		KEEP(*(SORT(.u_boot_list*)));
 	}
+	__init_end = . ;
 
 	.bss ALIGN(0x4):
 	{
diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h
index cd29734..4686734 100644
--- a/arch/microblaze/include/asm/config.h
+++ b/arch/microblaze/include/asm/config.h
@@ -7,4 +7,12 @@
 #ifndef _ASM_CONFIG_H_
 #define _ASM_CONFIG_H_
 
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_NEEDS_MANUAL_RELOC
+#endif
+
+#define CONFIG_NR_DRAM_BANKS	1
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_GENERIC_GLOBAL_DATA
+
 #endif
diff --git a/arch/microblaze/include/asm/u-boot.h b/arch/microblaze/include/asm/u-boot.h
index 54d415e..66f8f95 100644
--- a/arch/microblaze/include/asm/u-boot.h
+++ b/arch/microblaze/include/asm/u-boot.h
@@ -16,16 +16,7 @@
 #ifndef _U_BOOT_H_
 #define _U_BOOT_H_
 
-typedef struct bd_info {
-	unsigned long	bi_memstart;	/* start of DRAM memory */
-	phys_size_t	bi_memsize;	/* size	 of DRAM memory in bytes */
-	unsigned long	bi_flashstart;	/* start of FLASH memory */
-	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
-	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
-	unsigned long	bi_sramstart;	/* start of SRAM memory */
-	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
-	ulong		bi_boot_params; /* where this board expects params */
-} bd_t;
+#include <asm-generic/u-boot.h>
 
 /* For image.h:image_check_target_arch() */
 #define IH_ARCH_DEFAULT IH_ARCH_MICROBLAZE
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 339dd15..0289d0c 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -5,6 +5,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y	+= board.o
 obj-$(CONFIG_CMD_BOOTM) += bootm.o
 obj-y	+= muldi3.o
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
deleted file mode 100644
index bd028a6..0000000
--- a/arch/microblaze/lib/board.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Michal  SIMEK <monstr@monstr.eu>
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <version.h>
-#include <watchdog.h>
-#include <stdio_dev.h>
-#include <serial.h>
-#include <net.h>
-#include <spi.h>
-#include <linux/compiler.h>
-#include <asm/processor.h>
-#include <asm/microblaze_intc.h>
-#include <fdtdec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int display_banner(void)
-{
-	printf("\n\n%s\n\n", version_string);
-	return 0;
-}
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-typedef int (init_fnc_t) (void);
-
-init_fnc_t *init_sequence[] = {
-	env_init,
-#ifdef CONFIG_OF_CONTROL
-	fdtdec_check_fdt,
-#endif
-	serial_init,
-#ifndef CONFIG_SPL_BUILD
-	console_init_f,
-#endif
-	display_banner,
-#ifndef CONFIG_SPL_BUILD
-	interrupt_init,
-	timer_init,
-#endif
-	NULL,
-};
-
-unsigned long monitor_flash_len;
-
-void board_init_f(ulong not_used)
-{
-	bd_t *bd;
-	init_fnc_t **init_fnc_ptr;
-	gd = (gd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
-	bd = (bd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET
-						- GENERATED_BD_INFO_SIZE);
-#if defined(CONFIG_CMD_FLASH) && !defined(CONFIG_SPL_BUILD)
-	ulong flash_size = 0;
-#endif
-	asm ("nop");	/* FIXME gd is not initialize - wait */
-	memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
-	memset((void *)bd, 0, GENERATED_BD_INFO_SIZE);
-	gd->bd = bd;
-	gd->baudrate = CONFIG_BAUDRATE;
-	bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
-	bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
-	gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
-
-	monitor_flash_len = __end - __text_start;
-
-#ifdef CONFIG_OF_EMBED
-	/* Get a pointer to the FDT */
-	gd->fdt_blob = __dtb_dt_begin;
-#elif defined CONFIG_OF_SEPARATE
-	/* FDT is at end of image */
-	gd->fdt_blob = (void *)__end;
-#endif
-
-#ifndef CONFIG_SPL_BUILD
-	/* Allow the early environment to override the fdt address */
-	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
-						(uintptr_t)gd->fdt_blob);
-#endif
-
-	/*
-	 * The Malloc area is immediately below the monitor copy in DRAM
-	 * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
-	 * as our monitory code is run from SDRAM
-	 */
-	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
-
-	serial_initialize();
-
-#ifdef CONFIG_XILINX_TB_WATCHDOG
-	hw_watchdog_init();
-#endif
-	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-		WATCHDOG_RESET();
-		if ((*init_fnc_ptr) () != 0)
-			hang();
-	}
-
-#ifndef CONFIG_SPL_BUILD
-#ifdef CONFIG_OF_CONTROL
-	/* For now, put this check after the console is ready */
-	if (fdtdec_prepare_fdt())
-		panic("** No FDT - please see doc/README.fdt-control");
-	else
-		printf("DTB: 0x%x\n", (u32)gd->fdt_blob);
-#endif
-
-	puts("SDRAM :\n");
-	printf("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
-	printf("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
-	printf("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
-
-#if defined(CONFIG_CMD_FLASH)
-	puts("Flash: ");
-	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
-	flash_size = flash_init();
-	if (bd->bi_flashstart && flash_size > 0) {
-# ifdef CONFIG_SYS_FLASH_CHECKSUM
-		print_size(flash_size, "");
-		/*
-		 * Compute and print flash CRC if flashchecksum is set to 'y'
-		 *
-		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
-		 */
-		if (getenv_yesno("flashchecksum") == 1) {
-			printf("  CRC: %08X",
-			       crc32(0, (const u8 *)bd->bi_flashstart,
-				     flash_size)
-			);
-		}
-		putc('\n');
-# else	/* !CONFIG_SYS_FLASH_CHECKSUM */
-		print_size(flash_size, "\n");
-# endif /* CONFIG_SYS_FLASH_CHECKSUM */
-		bd->bi_flashsize = flash_size;
-		bd->bi_flashoffset = bd->bi_flashstart + flash_size;
-	} else {
-		puts("Flash init FAILED");
-		bd->bi_flashstart = 0;
-		bd->bi_flashsize = 0;
-		bd->bi_flashoffset = 0;
-	}
-#endif
-
-#ifdef CONFIG_SPI
-	spi_init();
-#endif
-
-	/* relocate environment function pointers etc. */
-	env_relocate();
-
-	/* Initialize stdio devices */
-	stdio_init();
-
-	/* Initialize the jump table for applications */
-	jumptable_init();
-
-	/* Initialize the console (after the relocation and devices init) */
-	console_init_r();
-
-	board_init();
-
-	/* Initialize from environment */
-	load_addr = getenv_ulong("loadaddr", 16, load_addr);
-
-#if defined(CONFIG_CMD_NET)
-	printf("Net:   ");
-	eth_initialize(gd->bd);
-
-	uchar enetaddr[6];
-	eth_getenv_enetaddr("ethaddr", enetaddr);
-	printf("MAC:   %pM\n", enetaddr);
-#endif
-
-	/* main_loop */
-	for (;;) {
-		WATCHDOG_RESET();
-		main_loop();
-	}
-#endif /* CONFIG_SPL_BUILD */
-}
diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index 42a8d0c..3110405 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -11,16 +11,62 @@
 
 #include <common.h>
 #include <config.h>
+#include <fdtdec.h>
 #include <netdev.h>
 #include <asm/processor.h>
 #include <asm/microblaze_intc.h>
 #include <asm/asm.h>
 #include <asm/gpio.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_XILINX_GPIO
 static int reset_pin = -1;
 #endif
 
+#ifdef CONFIG_OF_CONTROL
+ulong ram_base;
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = ram_base;
+	gd->bd->bi_dram[0].size = get_effective_memsize();
+}
+
+int dram_init(void)
+{
+	int node;
+	fdt_addr_t addr;
+	fdt_size_t size;
+	const void *blob = gd->fdt_blob;
+
+	node = fdt_node_offset_by_prop_value(blob, -1, "device_type",
+					     "memory", 7);
+	if (node == -FDT_ERR_NOTFOUND) {
+		debug("DRAM: Can't get memory node\n");
+		return 1;
+	}
+	addr = fdtdec_get_addr_size(blob, node, "reg", &size);
+	if (addr == FDT_ADDR_T_NONE || size == 0) {
+		debug("DRAM: Can't get base address or size\n");
+		return 1;
+	}
+	ram_base = addr;
+
+	gd->ram_top = addr; /* In setup_dest_addr() is done +ram_size */
+	gd->ram_size = size;
+
+	return 0;
+};
+#else
+int dram_init(void)
+{
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+	return 0;
+}
+#endif
+
 int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 #ifdef CONFIG_XILINX_GPIO
diff --git a/common/board_f.c b/common/board_f.c
index 7953137..d25329a 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -262,7 +262,7 @@ static int zero_global_data(void)
 
 static int setup_mon_len(void)
 {
-#ifdef __ARM__
+#if defined(__ARM__) || defined(__MICROBLAZE__)
 	gd->mon_len = (ulong)&__bss_end - (ulong)_start;
 #elif defined(CONFIG_SANDBOX)
 	gd->mon_len = (ulong)&_end - (ulong)_init;
@@ -909,7 +909,7 @@ static init_fnc_t init_sequence_f[] = {
 #endif
 	announce_dram_init,
 	/* TODO: unify all these dram functions? */
-#if defined(CONFIG_ARM) || defined(CONFIG_X86)
+#if defined(CONFIG_ARM) || defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE)
 	dram_init,		/* configure available RAM banks */
 #endif
 #if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
diff --git a/common/board_r.c b/common/board_r.c
index f7a3b55..907b33c 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -813,7 +813,7 @@ init_fnc_t init_sequence_r[] = {
 #if defined(CONFIG_ARM)
 	initr_enable_interrupts,
 #endif
-#ifdef CONFIG_X86
+#if defined(CONFIG_X86) || defined(CONFIG_MICROBLAZE)
 	timer_init,		/* initialize timer */
 #endif
 #if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index e6d8a7a..4c51059 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -183,8 +183,14 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	bd_t *bd = gd->bd;
-	print_num("mem start      ",	(ulong)bd->bi_memstart);
-	print_lnum("mem size       ",	(u64)bd->bi_memsize);
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) {
+		print_num("DRAM bank",	i);
+		print_num("-> start",	bd->bi_dram[i].start);
+		print_num("-> size",	bd->bi_dram[i].size);
+	}
+
 	print_num("flash start    ",	(ulong)bd->bi_flashstart);
 	print_num("flash size     ",	(ulong)bd->bi_flashsize);
 	print_num("flash offset   ",	(ulong)bd->bi_flashoffset);
@@ -196,6 +202,9 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_eths();
 #endif
 	printf("baudrate    = %u bps\n", gd->baudrate);
+	print_num("relocaddr", gd->relocaddr);
+	print_num("reloc off", gd->reloc_off);
+
 	return 0;
 }
 
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 2e1e642..622bc95 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -106,62 +106,16 @@
 # define CONFIG_XILINX_TB_WATCHDOG
 #endif
 
-/*
- * memory layout - Example
- * CONFIG_SYS_TEXT_BASE = 0x1200_0000;	defined in config.mk
- * CONFIG_SYS_SRAM_BASE = 0x1000_0000;
- * CONFIG_SYS_SRAM_SIZE = 0x0400_0000;	64MB
- *
- * CONFIG_SYS_MONITOR_LEN = 0x40000
- * CONFIG_SYS_MALLOC_LEN = 3 * CONFIG_SYS_MONITOR_LEN = 0xC0000
- *
- * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
- * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - CONFIG_SYS_MONITOR_LEN = 0x13FB_F000
- * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - CONFIG_SYS_MALLOC_LEN = 0x13EF_F000
- *
- * 0x1000_0000	CONFIG_SYS_SDRAM_BASE
- *					MEMTEST_AREA	 64kB
- *					FREE
- * 0x1200_0000	CONFIG_SYS_TEXT_BASE
- *		U-BOOT code
- * 0x1202_0000
- *					FREE
- *
- *					STACK
- * 0x13EF_F000	CONFIG_SYS_MALLOC_BASE
- *					MALLOC_AREA	768kB	Alloc
- * 0x13FB_F000	CONFIG_SYS_MONITOR_BASE
- *					MONITOR_CODE	256kB	Env
- * 0x13FF_F000	CONFIG_SYS_GBL_DATA_OFFSET
- *					GLOBAL_DATA	4kB	bd, gd
- * 0x1400_0000	CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
- */
-
+#ifndef CONFIG_OF_CONTROL
 /* ddr sdram - main memory */
-#define	CONFIG_SYS_SDRAM_BASE		XILINX_RAM_START
-#define	CONFIG_SYS_SDRAM_SIZE		XILINX_RAM_SIZE
-#define	CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)
-
-/* global pointer */
-/* start of global data */
-#define	CONFIG_SYS_GBL_DATA_OFFSET \
-		(CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/* monitor code */
-#define	SIZE				0x40000
-#define	CONFIG_SYS_MONITOR_LEN		SIZE
-#define	CONFIG_SYS_MONITOR_BASE	\
-		(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
-			- CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE)
-#define	CONFIG_SYS_MONITOR_END \
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define	CONFIG_SYS_MALLOC_LEN		(SIZE * 3)
-#define	CONFIG_SYS_MALLOC_BASE \
-			(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-
-/* stack */
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_MALLOC_BASE
+# define CONFIG_SYS_SDRAM_BASE	XILINX_RAM_START
+# define CONFIG_SYS_SDRAM_SIZE	XILINX_RAM_SIZE
+#endif
+
+#define CONFIG_SYS_MALLOC_LEN	0xC0000
+
+/* Stack location before relocation */
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_TEXT_BASE
 
 /*
  * CFI flash memory layout - Example

From 7c4dd542551dc146b6e3da0c1b519d95dd124d6c Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 27 Jan 2015 15:10:37 +0100
Subject: [PATCH 15/20] microblaze: Speedup code copy

Remove one instruction in the loop which speedup
code copying.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/start.S | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 3de0e12..4023ec0 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -212,12 +212,14 @@ relocate_code:
 	/* Relocate text and data - r12 temp value */
 	addi	r21, r0, _start
 	addi	r22, r0, __end - 4 /* Include BSS too */
-1:	lwi	r12, r21, 0 /* Load u-boot data */
-	swi	r12, r23, 0 /* Write zero to loc */
-	addi	r21, r21, 4 /* Increment to next loc - origin code */
-	cmp	r12, r21, r22 /* Check if we have reach the end */
+
+	rsub	r6, r21, r22
+	or	r5, r0, r0
+1:	lw	r12, r21, r5 /* Load u-boot data */
+	sw	r12, r23, r5 /* Write zero to loc */
+	cmp	r12, r5, r6 /* Check if we have reach the end */
 	bneid	r12, 1b
-	addi	r23, r23, 4 /* Increment to next loc - relocate code */
+	addi	r5, r5, 4 /* Increment to next loc - relocate code */
 
        /* R23 points to the base address. */
 	add	r23, r0, r7 /* Move reloc addr to r23 */

From de86765bc4854e7961c8d0b0bd4646e90dedf864 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 27 Jan 2015 15:41:08 +0100
Subject: [PATCH 16/20] bdinfo: Show information about fdt blob via bdinfo

Microblaze target supports both OF and !OF cases
and from log is not clear which version is running.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 common/cmd_bdinfo.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 4c51059..e9eab23 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -204,6 +204,9 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("baudrate    = %u bps\n", gd->baudrate);
 	print_num("relocaddr", gd->relocaddr);
 	print_num("reloc off", gd->reloc_off);
+	print_num("fdt_blob", (ulong)gd->fdt_blob);
+	print_num("new_fdt", (ulong)gd->new_fdt);
+	print_num("fdt_size", (ulong)gd->fdt_size);
 
 	return 0;
 }

From 0510b14b73cbe7e1c2b43272c7a3210af21dff31 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 30 Jan 2015 15:45:02 +0100
Subject: [PATCH 17/20] microblaze: Do not use CONFIG_SYS_GENERIC_GLOBAL_DATA

Because it is not compatible with DM where
malloc_base has to be available early and init
has to be done in ASM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/start.S          | 6 ++++++
 arch/microblaze/include/asm/config.h | 1 -
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 4023ec0..3eeeab4 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -151,6 +151,7 @@ clear_bss:
 3:	/* jumping to board_init */
 #ifndef CONFIG_SPL_BUILD
 	or	r5, r0, r0	/* flags - empty */
+	addi    r31, r0, _gd
 	brai	board_init_f
 #else
 	addi	r31, r0, CONFIG_SYS_SPL_MALLOC_END
@@ -158,6 +159,11 @@ clear_bss:
 #endif
 1:	bri	1b
 
+ .section .bss
+.align 4
+_gd:
+         .space  GENERATED_GBL_DATA_SIZE
+
 #ifndef CONFIG_SPL_BUILD
 /*
  * Read 16bit little endian
diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h
index 4686734..32fd636 100644
--- a/arch/microblaze/include/asm/config.h
+++ b/arch/microblaze/include/asm/config.h
@@ -13,6 +13,5 @@
 
 #define CONFIG_NR_DRAM_BANKS	1
 #define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_SYS_GENERIC_GLOBAL_DATA
 
 #endif

From 405e651d705e197babe423ef88e8224e2737fc06 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 30 Jan 2015 15:46:43 +0100
Subject: [PATCH 18/20] microblaze: Add support for CONFIG_SYS_MALLOC_F_LEN

Create space for dm_init where calloc is called
and malloc_base has to be initialized.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/start.S          | 8 ++++++++
 include/configs/microblaze-generic.h | 1 +
 2 files changed, 9 insertions(+)

diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 3eeeab4..cf9ee7e 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -30,7 +30,11 @@ _start:
 	mts	rshr, r1
 	addi	r1, r1, -4	/* Decrement SP to top of memory */
 #else
+#if defined(CONFIG_SYS_MALLOC_F_LEN)
+	addi	r1, r0, CONFIG_SYS_INIT_SP_OFFSET - CONFIG_SYS_MALLOC_F_LEN
+#else
 	addi	r1, r0, CONFIG_SYS_INIT_SP_OFFSET
+#endif
 	mts	rshr, r1
 	addi	r1, r1, -4	/* Decrement SP to top of memory */
 
@@ -152,6 +156,10 @@ clear_bss:
 #ifndef CONFIG_SPL_BUILD
 	or	r5, r0, r0	/* flags - empty */
 	addi    r31, r0, _gd
+#if defined(CONFIG_SYS_MALLOC_F_LEN)
+	addi	r6, r0, CONFIG_SYS_INIT_SP_OFFSET
+	swi	r6, r31, GD_MALLOC_BASE
+#endif
 	brai	board_init_f
 #else
 	addi	r31, r0, CONFIG_SYS_SPL_MALLOC_END
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 622bc95..770acbe 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -113,6 +113,7 @@
 #endif
 
 #define CONFIG_SYS_MALLOC_LEN	0xC0000
+#define CONFIG_SYS_MALLOC_F_LEN	1024
 
 /* Stack location before relocation */
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_TEXT_BASE

From ca7d22662e1ca1b05fd4cd3d1f80efec93c499ef Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 3 Feb 2015 16:24:48 +0100
Subject: [PATCH 19/20] microblaze: spl: Do not call mem_malloc_init and use
 early alloc

This patch has some parts connected together:
- Use _gd in bss section which is automatically cleared
  Location at SPL_MALLOC_END wasn't cleared at all
- Use MALLOC_F_LEN(early alloc) instead of FULL MALLOC
  (mem_malloc_init is not called at all)
- Simplify malloc and stack init.
  At the end of SPL addr is malloc area and below is stack

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/start.S          |  6 +++++-
 include/configs/microblaze-generic.h | 32 +++++++++++---------------------
 2 files changed, 16 insertions(+), 22 deletions(-)

diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index cf9ee7e..953d3a1 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -162,7 +162,11 @@ clear_bss:
 #endif
 	brai	board_init_f
 #else
-	addi	r31, r0, CONFIG_SYS_SPL_MALLOC_END
+	addi	r31, r0, _gd
+#if defined(CONFIG_SYS_MALLOC_F_LEN)
+	addi	r6, r0, CONFIG_SPL_STACK_ADDR
+	swi	r6, r31, GD_MALLOC_BASE
+#endif
 	brai	board_init_r
 #endif
 1:	bri	1b
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 770acbe..166ab4f 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -113,7 +113,12 @@
 #endif
 
 #define CONFIG_SYS_MALLOC_LEN	0xC0000
-#define CONFIG_SYS_MALLOC_F_LEN	1024
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_SYS_MALLOC_F_LEN	1024
+#else
+# define CONFIG_SYS_MALLOC_SIMPLE
+# define CONFIG_SYS_MALLOC_F_LEN	0x150
+#endif
 
 /* Stack location before relocation */
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_TEXT_BASE
@@ -426,25 +431,11 @@
 /* BRAM start */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x0
 /* BRAM size - will be generated */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
-/* Stack pointer prior relocation, must situated at on-chip RAM */
-#define CONFIG_SYS_SPL_MALLOC_END	(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x100000
 
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100
-
-/*
- * The main reason to do it in this way is that MALLOC_START
- * can't be defined - common/spl/spl.c
- */
-#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0)
-# define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_SPL_MALLOC_END - \
-					 CONFIG_SYS_SPL_MALLOC_SIZE)
-# define CONFIG_SPL_STACK_ADDR		CONFIG_SYS_SPL_MALLOC_START
-#else
-# define CONFIG_SPL_STACK_ADDR		CONFIG_SYS_SPL_MALLOC_END
-#endif
+# define CONFIG_SPL_STACK_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 CONFIG_SYS_MALLOC_F_LEN)
 
 /* Just for sure that there is a space for stack */
 #define CONFIG_SPL_STACK_SIZE		0x100
@@ -453,8 +444,7 @@
 
 #define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_INIT_RAM_SIZE - \
 					 CONFIG_SYS_INIT_RAM_ADDR - \
-					 GENERATED_GBL_DATA_SIZE - \
-					 CONFIG_SYS_SPL_MALLOC_SIZE - \
+					 CONFIG_SYS_MALLOC_F_LEN - \
 					 CONFIG_SPL_STACK_SIZE)
 
 #endif	/* __CONFIG_H */

From 7f33899221e4235900760add69ffbb5f66f1229d Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 3 Feb 2015 15:09:52 +0100
Subject: [PATCH 20/20] microblaze: spl: Add LISTS to linker script

This is required for driver model.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/cpu/u-boot-spl.lds | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/microblaze/cpu/u-boot-spl.lds b/arch/microblaze/cpu/u-boot-spl.lds
index 96353cd..c60336c 100644
--- a/arch/microblaze/cpu/u-boot-spl.lds
+++ b/arch/microblaze/cpu/u-boot-spl.lds
@@ -37,6 +37,12 @@ SECTIONS
 		__data_end = .;
 	}
 
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+	__init_end = . ;
+
 	.bss ALIGN(0x4):
 	{
 		__bss_start = .;