add I2C support; add support for DS1337 RTC * Add CompactFlash support for BMS2003 board * Add support for status LED on BMS2003 boardmaster
wdenk
21 years ago
parent
180d3f74e4
commit
a522fa0e7c
@ -0,0 +1,515 @@ |
||||
/*
|
||||
* (C) Copyright 2000-2003 |
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
||||
* |
||||
* See file CREDITS for list of people who contributed to this |
||||
* project. |
||||
* |
||||
* This program is free software; you can redistribute it and/or |
||||
* modify it under the terms of the GNU General Public License as |
||||
* published by the Free Software Foundation; either version 2 of |
||||
* the License, or (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program; if not, write to the Free Software |
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||
* MA 02111-1307 USA |
||||
*/ |
||||
|
||||
/*
|
||||
* board/config.h - configuration options, board specific |
||||
*/ |
||||
|
||||
#ifndef __CONFIG_H |
||||
#define __CONFIG_H |
||||
|
||||
/*
|
||||
* High Level Configuration Options |
||||
* (easy to change) |
||||
*/ |
||||
|
||||
#define CONFIG_BMS2003 |
||||
#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ |
||||
#define CONFIG_TQM823L 1 /* ...on a TQM8xxL module */ |
||||
|
||||
#define CONFIG_LCD |
||||
#define CONFIG_NEC_NL6448BC33_54 /* NEC NL6448BC33_54 display */ |
||||
|
||||
#ifdef CONFIG_LCD /* with LCD controller ? */ |
||||
#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/ |
||||
#endif |
||||
|
||||
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ |
||||
#undef CONFIG_8xx_CONS_SMC2 |
||||
#undef CONFIG_8xx_CONS_NONE |
||||
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ |
||||
|
||||
#define CONFIG_BOOTCOUNT_LIMIT |
||||
|
||||
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ |
||||
|
||||
#define CONFIG_BOARD_TYPES 1 /* support board types */ |
||||
|
||||
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" |
||||
|
||||
#undef CONFIG_BOOTARGS |
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"netdev=eth0\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=$(serverip):$(rootpath)\0" \
|
||||
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
||||
"addip=setenv bootargs $(bootargs) " \
|
||||
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
|
||||
":$(hostname):$(netdev):off panic=1\0" \
|
||||
"flash_nfs=run nfsargs addip;" \
|
||||
"bootm $(kernel_addr)\0" \
|
||||
"flash_self=run ramargs addip;" \
|
||||
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
|
||||
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
|
||||
"rootpath=/opt/eldk/ppc_8xx\0" \
|
||||
"bootfile=/tftpboot/TQM860L/uImage\0" \
|
||||
"kernel_addr=40040000\0" \
|
||||
"ramdisk_addr=40100000\0" \
|
||||
"" |
||||
#define CONFIG_BOOTCOMMAND "run flash_self" |
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ |
||||
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ |
||||
|
||||
/* enable I2C and select the hardware/software driver */ |
||||
#undef CONFIG_HARD_I2C /* I2C with hardware support */ |
||||
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ |
||||
|
||||
#define CFG_I2C_SPEED 40000 /* 40 kHz is supposed to work */ |
||||
#define CFG_I2C_SLAVE 0xFE |
||||
|
||||
/* Software (bit-bang) I2C driver configuration */ |
||||
#define PB_SCL 0x00000020 /* PB 26 */ |
||||
#define PB_SDA 0x00000010 /* PB 27 */ |
||||
|
||||
#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) |
||||
#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) |
||||
#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) |
||||
#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) |
||||
#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ |
||||
else immr->im_cpm.cp_pbdat &= ~PB_SDA |
||||
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ |
||||
else immr->im_cpm.cp_pbdat &= ~PB_SCL |
||||
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ |
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */ |
||||
|
||||
#define CONFIG_STATUS_LED 1 /* Status LED enabled */ |
||||
|
||||
#define CONFIG_CAN_DRIVER 1 /* CAN Driver support enabled */ |
||||
|
||||
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) |
||||
|
||||
#define CONFIG_MAC_PARTITION |
||||
#define CONFIG_DOS_PARTITION |
||||
|
||||
#define CONFIG_RTC_DS1337 /* Use ds1337 rtc via i2c */ |
||||
#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ |
||||
|
||||
#ifdef CONFIG_SPLASH_SCREEN |
||||
# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ |
||||
CFG_CMD_ASKENV | \
|
||||
CFG_CMD_BMP | \
|
||||
CFG_CMD_DATE | \
|
||||
CFG_CMD_DHCP | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_IDE ) |
||||
#else |
||||
# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ |
||||
CFG_CMD_ASKENV | \
|
||||
CFG_CMD_DATE | \
|
||||
CFG_CMD_DHCP | \
|
||||
CFG_CMD_I2C | \
|
||||
CFG_CMD_IDE ) |
||||
#endif |
||||
|
||||
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ |
||||
#include <cmd_confdefs.h> |
||||
|
||||
/*
|
||||
* Miscellaneous configurable options |
||||
*/ |
||||
#define CFG_LONGHELP /* undef to save memory */ |
||||
#define CFG_PROMPT "=> " /* Monitor Command Prompt */ |
||||
|
||||
#if 0 |
||||
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ |
||||
#endif |
||||
#ifdef CFG_HUSH_PARSER |
||||
#define CFG_PROMPT_HUSH_PS2 "> " |
||||
#endif |
||||
|
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) |
||||
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
||||
#else |
||||
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
||||
#endif |
||||
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
||||
#define CFG_MAXARGS 16 /* max number of command args */ |
||||
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
||||
|
||||
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ |
||||
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ |
||||
|
||||
#define CFG_LOAD_ADDR 0x100000 /* default load address */ |
||||
|
||||
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ |
||||
|
||||
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
||||
|
||||
/*
|
||||
* Low Level Configuration Settings |
||||
* (address mappings, register initial values, etc.) |
||||
* You should know what you are doing if you make changes here. |
||||
*/ |
||||
/*-----------------------------------------------------------------------
|
||||
* Internal Memory Mapped Register |
||||
*/ |
||||
#define CFG_IMMR 0xFFF00000 |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Definitions for initial stack pointer and data area (in DPRAM) |
||||
*/ |
||||
#define CFG_INIT_RAM_ADDR CFG_IMMR |
||||
#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ |
||||
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ |
||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) |
||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Start addresses for the final memory configuration |
||||
* (Set up by the startup code) |
||||
* Please note that CFG_SDRAM_BASE _must_ start at 0 |
||||
*/ |
||||
#define CFG_SDRAM_BASE 0x00000000 |
||||
#define CFG_FLASH_BASE 0x40000000 |
||||
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ |
||||
#define CFG_MONITOR_BASE CFG_FLASH_BASE |
||||
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ |
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data |
||||
* have to be in the first 8 MB of memory, since this is |
||||
* the maximum mapped by the Linux kernel during initialization. |
||||
*/ |
||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH organization |
||||
*/ |
||||
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ |
||||
#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ |
||||
|
||||
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
||||
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ |
||||
|
||||
#define CFG_ENV_IS_IN_FLASH 1 |
||||
#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ |
||||
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ |
||||
|
||||
/* Address and size of Redundant Environment Sector */ |
||||
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) |
||||
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Hardware Information Block |
||||
*/ |
||||
#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ |
||||
#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */ |
||||
#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Cache Configuration |
||||
*/ |
||||
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ |
||||
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) |
||||
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ |
||||
#endif |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SYPCR - System Protection Control 11-9 |
||||
* SYPCR can only be written once after reset! |
||||
*----------------------------------------------------------------------- |
||||
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze |
||||
*/ |
||||
#if defined(CONFIG_WATCHDOG) |
||||
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ |
||||
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) |
||||
#else |
||||
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) |
||||
#endif |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SIUMCR - SIU Module Configuration 11-6 |
||||
*----------------------------------------------------------------------- |
||||
* PCMCIA config., multi-function pin tri-state |
||||
*/ |
||||
#ifndef CONFIG_CAN_DRIVER |
||||
#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) |
||||
#else /* we must activate GPL5 in the SIUMCR for CAN */ |
||||
#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) |
||||
#endif /* CONFIG_CAN_DRIVER */ |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* TBSCR - Time Base Status and Control 11-26 |
||||
*----------------------------------------------------------------------- |
||||
* Clear Reference Interrupt Status, Timebase freezing enabled |
||||
*/ |
||||
#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* RTCSC - Real-Time Clock Status and Control Register 11-27 |
||||
*----------------------------------------------------------------------- |
||||
*/ |
||||
#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PISCR - Periodic Interrupt Status and Control 11-31 |
||||
*----------------------------------------------------------------------- |
||||
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled |
||||
*/ |
||||
#define CFG_PISCR (PISCR_PS | PISCR_PITF) |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 |
||||
*----------------------------------------------------------------------- |
||||
* Reset PLL lock status sticky bit, timer expired status bit and timer |
||||
* interrupt status bit |
||||
* |
||||
* If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! |
||||
*/ |
||||
#ifdef CONFIG_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */ |
||||
#define CFG_PLPRCR \ |
||||
( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST ) |
||||
#else /* up to 66 MHz we use a 1:1 clock */ |
||||
#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) |
||||
#endif /* CONFIG_80MHz */ |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* SCCR - System Clock and reset Control Register 15-27 |
||||
*----------------------------------------------------------------------- |
||||
* Set clock output, timebase and RTC source and divider, |
||||
* power management and some other internal clocks |
||||
*/ |
||||
#define SCCR_MASK SCCR_EBDF11 |
||||
#ifdef CONFIG_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */ |
||||
#define CFG_SCCR (/* SCCR_TBS | */ \ |
||||
SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
|
||||
SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
|
||||
SCCR_DFALCD00) |
||||
#else /* up to 66 MHz we use a 1:1 clock */ |
||||
#define CFG_SCCR (SCCR_TBS | \ |
||||
SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
|
||||
SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
|
||||
SCCR_DFALCD00) |
||||
#endif /* CONFIG_80MHz */ |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCMCIA stuff |
||||
*----------------------------------------------------------------------- |
||||
* |
||||
*/ |
||||
#ifndef CONFIG_BMS2003 |
||||
#define CFG_PCMCIA_MEM_ADDR (0xE0000000) |
||||
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) |
||||
#define CFG_PCMCIA_DMA_ADDR (0xE4000000) |
||||
#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) |
||||
#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) |
||||
#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) |
||||
#define CFG_PCMCIA_IO_ADDR (0xEC000000) |
||||
#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) |
||||
#else /* CONFIG_BMS2003 */ |
||||
#define CFG_PCMCIA_MEM_ADDR (0xE0100000) |
||||
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) |
||||
#define CFG_PCMCIA_DMA_ADDR (0xE4100000) |
||||
#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) |
||||
#define CFG_PCMCIA_ATTRB_ADDR (0xE8100000) |
||||
#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) |
||||
#define CFG_PCMCIA_IO_ADDR (0xEC100000) |
||||
#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) |
||||
#define NSCU_OE_INV 1 /* PCMCIA_GCRX_CXOE is inverted */ |
||||
#endif |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) |
||||
*----------------------------------------------------------------------- |
||||
*/ |
||||
|
||||
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ |
||||
|
||||
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ |
||||
#undef CONFIG_IDE_LED /* LED for ide not supported */ |
||||
#undef CONFIG_IDE_RESET /* reset for ide not supported */ |
||||
|
||||
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ |
||||
#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ |
||||
|
||||
#define CFG_ATA_IDE0_OFFSET 0x0000 |
||||
|
||||
#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR |
||||
|
||||
/* Offset for data I/O */ |
||||
#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320) |
||||
|
||||
/* Offset for normal register accesses */ |
||||
#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320) |
||||
|
||||
/* Offset for alternate registers */ |
||||
#define CFG_ATA_ALT_OFFSET 0x0100 |
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* |
||||
*----------------------------------------------------------------------- |
||||
* |
||||
*/ |
||||
#define CFG_DER 0 |
||||
|
||||
/*
|
||||
* Init Memory Controller: |
||||
* |
||||
* BR0/1 and OR0/1 (FLASH) |
||||
*/ |
||||
|
||||
#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ |
||||
#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ |
||||
|
||||
/* used to re-map FLASH both when starting from SRAM or FLASH:
|
||||
* restrict access enough to keep SRAM working (if any) |
||||
* but not too much to meddle with FLASH accesses |
||||
*/ |
||||
#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ |
||||
#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ |
||||
|
||||
/*
|
||||
* FLASH timing: |
||||
*/ |
||||
#if defined(CONFIG_80MHz) |
||||
/* 80 MHz CPU - 40 MHz bus: ACS = 00, TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */ |
||||
#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | 0 | OR_CSNT_SAM | \ |
||||
OR_SCY_3_CLK | OR_EHTR | OR_BI) |
||||
#elif defined(CONFIG_66MHz) |
||||
/* 66 MHz CPU - 66 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1 */ |
||||
#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ |
||||
OR_SCY_3_CLK | OR_EHTR | OR_BI) |
||||
#else /* 50 MHz */ |
||||
/* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */ |
||||
#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ |
||||
OR_SCY_2_CLK | OR_EHTR | OR_BI) |
||||
#endif /*CONFIG_??MHz */ |
||||
|
||||
#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) |
||||
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) |
||||
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) |
||||
|
||||
#define CFG_OR1_REMAP CFG_OR0_REMAP |
||||
#define CFG_OR1_PRELIM CFG_OR0_PRELIM |
||||
#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V ) |
||||
|
||||
/*
|
||||
* BR2/3 and OR2/3 (SDRAM) |
||||
* |
||||
*/ |
||||
#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ |
||||
#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ |
||||
#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ |
||||
|
||||
/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ |
||||
#define CFG_OR_TIMING_SDRAM 0x00000A00 |
||||
|
||||
#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM ) |
||||
#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) |
||||
|
||||
#ifndef CONFIG_CAN_DRIVER |
||||
#define CFG_OR3_PRELIM CFG_OR2_PRELIM |
||||
#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) |
||||
#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */ |
||||
#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */ |
||||
#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */ |
||||
#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI) |
||||
#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \ |
||||
BR_PS_8 | BR_MS_UPMB | BR_V ) |
||||
#endif /* CONFIG_CAN_DRIVER */ |
||||
|
||||
/*
|
||||
* Memory Periodic Timer Prescaler |
||||
* |
||||
* The Divider for PTA (refresh timer) configuration is based on an |
||||
* example SDRAM configuration (64 MBit, one bank). The adjustment to |
||||
* the number of chip selects (NCS) and the actually needed refresh |
||||
* rate is done by setting MPTPR. |
||||
* |
||||
* PTA is calculated from |
||||
* PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) |
||||
* |
||||
* gclk CPU clock (not bus clock!) |
||||
* Trefresh Refresh cycle * 4 (four word bursts used) |
||||
* |
||||
* 4096 Rows from SDRAM example configuration |
||||
* 1000 factor s -> ms |
||||
* 32 PTP (pre-divider from MPTPR) from SDRAM example configuration |
||||
* 4 Number of refresh cycles per period |
||||
* 64 Refresh cycle in ms per number of rows |
||||
* -------------------------------------------- |
||||
* Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 |
||||
* |
||||
* 50 MHz => 50.000.000 / Divider = 98 |
||||
* 66 Mhz => 66.000.000 / Divider = 129 |
||||
* 80 Mhz => 80.000.000 / Divider = 156 |
||||
*/ |
||||
#if defined(CONFIG_80MHz) |
||||
#define CFG_MAMR_PTA 156 |
||||
#elif defined(CONFIG_66MHz) |
||||
#define CFG_MAMR_PTA 129 |
||||
#else /* 50 MHz */ |
||||
#define CFG_MAMR_PTA 98 |
||||
#endif /*CONFIG_??MHz */ |
||||
|
||||
/*
|
||||
* For 16 MBit, refresh rates could be 31.3 us |
||||
* (= 64 ms / 2K = 125 / quad bursts). |
||||
* For a simpler initialization, 15.6 us is used instead. |
||||
* |
||||
* #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks |
||||
* #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank |
||||
*/ |
||||
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ |
||||
#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ |
||||
|
||||
/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ |
||||
#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ |
||||
#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ |
||||
|
||||
/*
|
||||
* MAMR settings for SDRAM |
||||
*/ |
||||
|
||||
/* 8 column SDRAM */ |
||||
#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ |
||||
MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
|
||||
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) |
||||
/* 9 column SDRAM */ |
||||
#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ |
||||
MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
|
||||
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) |
||||
|
||||
|
||||
/*
|
||||
* Internal Definitions |
||||
* |
||||
* Boot Flags |
||||
*/ |
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ |
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */ |
||||
|
||||
#endif /* __CONFIG_H */ |
||||
Loading…
Reference in new issue