85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical address on FSL boards

Use the _MEM_PHYS defines instead of _MEM_BUS for LAW and real address fields
of TLBs.  This is what we should have always been using from the start.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Andy Fleming <afleming@freescale.com>
master
Kumar Gala 16 years ago committed by Andrew Fleming-AFLEMING
parent 5f91ef6acd
commit a6e04c344a
  1. 2
      board/freescale/mpc8540ads/law.c
  2. 4
      board/freescale/mpc8540ads/tlb.c
  3. 4
      board/freescale/mpc8548cds/tlb.c
  4. 2
      board/freescale/mpc8560ads/law.c
  5. 4
      board/freescale/mpc8560ads/tlb.c
  6. 2
      board/freescale/mpc8568mds/law.c
  7. 1
      include/configs/MPC8568MDS.h

@ -52,7 +52,7 @@ struct law_entry law_table[] = {
/* This is not so much the SDRAM map as it is the whole localbus map. */
SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
SET_LAW(CONFIG_SYS_RIO_MEM_BUS, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
};
int num_law_entries = ARRAY_SIZE(law_table);

@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
* TLB 3: 256M Non-cacheable, guarded
* 0xc0000000 256M Rapid IO MEM First half
*/
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS, CONFIG_SYS_RIO_MEM_BUS,
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS, CONFIG_SYS_RIO_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 3, BOOKE_PAGESZ_256M, 1),
@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
* TLB 4: 256M Non-cacheable, guarded
* 0xd0000000 256M Rapid IO MEM Second half
*/
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS + 0x10000000, CONFIG_SYS_RIO_MEM_BUS + 0x10000000,
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS + 0x10000000, CONFIG_SYS_RIO_MEM_PHYS + 0x10000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_256M, 1),

@ -62,14 +62,14 @@ struct fsl_e_tlb_entry tlb_table[] = {
/*
* TLB 2: 256M Non-cacheable, guarded
*/
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS, CONFIG_SYS_RIO_MEM_BUS,
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS, CONFIG_SYS_RIO_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 2, BOOKE_PAGESZ_256M, 1),
/*
* TLB 3: 256M Non-cacheable, guarded
*/
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS + 0x10000000, CONFIG_SYS_RIO_MEM_BUS + 0x10000000,
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS + 0x10000000, CONFIG_SYS_RIO_MEM_PHYS + 0x10000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 3, BOOKE_PAGESZ_256M, 1),
#endif

@ -52,7 +52,7 @@ struct law_entry law_table[] = {
/* This is not so much the SDRAM map as it is the whole localbus map. */
SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI),
SET_LAW(CONFIG_SYS_RIO_MEM_BUS, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO),
};
int num_law_entries = ARRAY_SIZE(law_table);

@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
* TLB 3: 256M Non-cacheable, guarded
* 0xc0000000 256M Rapid IO MEM First half
*/
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS, CONFIG_SYS_RIO_MEM_BUS,
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS, CONFIG_SYS_RIO_MEM_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 3, BOOKE_PAGESZ_256M, 1),
@ -78,7 +78,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
* TLB 4: 256M Non-cacheable, guarded
* 0xd0000000 256M Rapid IO MEM Second half
*/
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS + 0x10000000, CONFIG_SYS_RIO_MEM_BUS + 0x10000000,
SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BUS + 0x10000000, CONFIG_SYS_RIO_MEM_PHYS + 0x10000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_256M, 1),

@ -54,7 +54,7 @@ struct law_entry law_table[] = {
SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI),
SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
SET_LAW(CONFIG_SYS_SRIO_MEM_BUS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
SET_LAW(CONFIG_SYS_SRIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
/* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */
SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
};

@ -337,6 +337,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
#define CONFIG_SYS_SRIO_MEM_BUS 0xc0000000
#define CONFIG_SYS_SRIO_MEM_PHYS 0xc0000000
#ifdef CONFIG_QE
/*

Loading…
Cancel
Save