@ -47,6 +47,12 @@
# define RSTCTRL_FORCE_PWR_NEN 0x0404
# define RSTCTRL_CAN_STB 0x4040
# define VXWORKS_BOOTLINE 0x80001100
# define DEFAULT_BOOTLINE "cpsw(0,0):pme / vxWorks"
# define VXWORKS_USER "u=vxWorksFTP pw=vxWorks tn=vxtarget"
DECLARE_GLOBAL_DATA_PTR ;
# if defined(CONFIG_SPL_BUILD)
/* TODO: check ram-timing ! */
static const struct ddr_data ddr3_data = {
@ -248,6 +254,30 @@ int board_late_init(void)
} else {
puts ( " ERROR: i2c_set_bus_speed failed! (scratchregister) \n " ) ;
}
/* setup vxworks bootline */
char * vxworksbootline = ( char * ) VXWORKS_BOOTLINE ;
/* setup default IP, in case if there is nothing in environment */
if ( ! getenv ( " ipaddr " ) ) {
setenv ( " ipaddr " , " 192.168.60.1 " ) ;
setenv ( " netmask " , " 255.255.255.0 " ) ;
setenv ( " serverip " , " 192.168.60.254 " ) ;
setenv ( " gatewayip " , " 192.168.60.254 " ) ;
puts ( " net: had no IP! made default setup. \n " ) ;
}
sprintf ( vxworksbootline ,
" %s h=%s e=%s:%s g=%s %s o=0x%08x;0x%08x;0x%08x;0x%08x " ,
DEFAULT_BOOTLINE ,
getenv ( " serverip " ) ,
getenv ( " ipaddr " ) , getenv ( " netmask " ) ,
getenv ( " gatewayip " ) ,
VXWORKS_USER ,
( unsigned int ) gd - > fb_base - 0x20 ,
( u32 ) getenv_ulong ( " vx_memtop " , 16 , gd - > fb_base - 0x20 ) ,
( u32 ) getenv_ulong ( " vx_romfsbase " , 16 , 0 ) ,
( u32 ) getenv_ulong ( " vx_romfssize " , 16 , 0 ) ) ;
/*
* reset VBAR registers to its reset location , VxWorks 6.9 .3 .2 does
* expect that vectors are there , original u - boot moves them to _start