drivers/pci: Move conditional compilation to Makefile

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

drivers/pci/Makefile

@@ -25,15 +25,13 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libpci.a
 
-COBJS-y += fsl_pci_init.o
-COBJS-y += pci.o
-COBJS-y += pci_auto.o
-COBJS-y += pci_indirect.o
-COBJS-y += tsi108_pci.o
-COBJS-y += w83c553f.o
+COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
+COBJS-$(CONFIG_PCI) += pci.o pci_auto.o pci_indirect.o
 COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o
 COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
 COBJS-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
+COBJS-$(CONFIG_TSI108_PCI) += tsi108_pci.o
+COBJS-$(CONFIG_WINBOND_83C553) += w83c553f.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/pci/fsl_pci_init.c

@@ -18,8 +18,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_FSL_PCI_INIT
-
 /*
  * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
  *
@@ -197,5 +195,3 @@ fsl_pci_init(struct pci_controller *hose)
 		pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
 	}
 }
-
-#endif /* CONFIG_FSL_PCI */

drivers/pci/pci.c

@@ -30,8 +30,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_PCI
-
 #include <command.h>
 #include <asm/processor.h>
 #include <asm/io.h>
@@ -544,5 +542,3 @@ void pci_init(void)
 	/* now call board specific pci_init()... */
 	pci_init_board();
 }
-
-#endif /* CONFIG_PCI */

drivers/pci/pci_auto.c

@@ -15,8 +15,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_PCI
-
 #include <pci.h>
 
 #undef DEBUG
@@ -408,5 +406,3 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 
 	return sub_bus;
 }
-
-#endif /* CONFIG_PCI */

drivers/pci/pci_indirect.c

@@ -11,7 +11,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_PCI
 #if (!defined(__I386__) && !defined(CONFIG_IXDP425))
 
 #include <asm/processor.h>
@@ -135,4 +134,3 @@ void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
 }
 
 #endif	/* !__I386__ && !CONFIG_IXDP425 */
-#endif	/* CONFIG_PCI */

drivers/pci/tsi108_pci.c

@@ -27,8 +27,6 @@
 
 #include <config.h>
 
-#ifdef CONFIG_TSI108_PCI
-
 #include <common.h>
 #include <pci.h>
 #include <asm/io.h>
@@ -182,5 +180,3 @@ void ft_pci_setup(void *blob, bd_t *bd)
 	}
 }
 #endif /* CONFIG_OF_LIBFDT */
-
-#endif	/* CONFIG_TSI108_PCI */

drivers/pci/w83c553f.c

@@ -30,8 +30,6 @@
 #include <common.h>
 #include <config.h>
 
-#ifdef CFG_WINBOND_83C553
-
 #include <asm/io.h>
 #include <pci.h>
 
@@ -222,5 +220,3 @@ void initialise_dma(void)
 	out8(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00);
 	out16(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000);
 }
-
-#endif /* CFG_WINBOND_83C553 */

include/configs/BAB7xx.h

@@ -338,7 +338,7 @@ extern unsigned char   scsi_sym53c8xx_ccf;
 /*
  * Winbond Configuration
  */
-#define CFG_WINBOND_83C553      1                       /* has a winbond bridge */
+#define CONFIG_WINBOND_83C553      1                       /* has a winbond bridge */
 #define CFG_USE_WINBOND_IDE     0                       /* use winbond 83c553 internal ide */
 #define CFG_WINBOND_ISA_CFG_ADDR    0x80005800          /* pci-isa bridge config addr */
 #define CFG_WINBOND_IDE_CFG_ADDR    0x80005900          /* ide config addr */

include/configs/HIDDEN_DRAGON.h

@@ -201,7 +201,7 @@
  */
 
 
-#define CFG_WINBOND_83C553	1	/*has a winbond bridge			*/
+#define CONFIG_WINBOND_83C553	1	/*has a winbond bridge			*/
 #define CFG_USE_WINBOND_IDE	0	/*use winbond 83c553 internal IDE ctrlr */
 #define CFG_WINBOND_ISA_CFG_ADDR    0x80005800	/*pci-isa bridge config addr	*/
 #define CFG_WINBOND_IDE_CFG_ADDR    0x80005900	/*ide config addr		*/

include/configs/Sandpoint8240.h

@@ -235,7 +235,7 @@
  */
 
 
-#define CFG_WINBOND_83C553	1	/*has a winbond bridge			*/
+#define CONFIG_WINBOND_83C553	1	/*has a winbond bridge			*/
 #define CFG_USE_WINBOND_IDE	0	/*use winbond 83c553 internal IDE ctrlr */
 #define CFG_WINBOND_ISA_CFG_ADDR    0x80005800	/*pci-isa bridge config addr	*/
 #define CFG_WINBOND_IDE_CFG_ADDR    0x80005900	/*ide config addr		*/

include/configs/Sandpoint8245.h

@@ -203,7 +203,7 @@
  */
 
 
-#define CFG_WINBOND_83C553	1	/*has a winbond bridge			*/
+#define CONFIG_WINBOND_83C553	1	/*has a winbond bridge			*/
 #define CFG_USE_WINBOND_IDE	0	/*use winbond 83c553 internal IDE ctrlr */
 #define CFG_WINBOND_ISA_CFG_ADDR    0x80005800	/*pci-isa bridge config addr	*/
 #define CFG_WINBOND_IDE_CFG_ADDR    0x80005900	/*ide config addr		*/