Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

arm: dts: imx7: sync with Linux

Browse Source 
Sync with Linux commit 60cc43fc8884 ("Linux 4.17-rc1").

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
lime2-spi
Stefan Agner 7 years ago committed by Stefano Babic
parent 627544506f
commit aba6a0fb8f
3 changed files with 341 additions and 181 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 491
      arch/arm/dts/imx7s.dtsi
  2. 15
      include/dt-bindings/clock/imx7d-clock.h
  3. 16
      include/dt-bindings/power/imx7-power.h

491
arch/arm/dts/imx7s.dtsi
Unescape View File

@ -42,6 +42,7 @@
*/
#include <dt-bindings/clock/imx7d-clock.h>
#include <dt-bindings/power/imx7-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@ -57,7 +58,7 @@
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; reg = <0 0>; };
memory { device_type = "memory"; };
aliases {
gpio0 = &gpio1;
@ -115,11 +116,77 @@
clock-output-names = "osc";
};
usbphynop1: usbphynop1 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_PHY1_CLK>;
clock-names = "main_clk";
#phy-cells = <0>;
};
usbphynop3: usbphynop3 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
clock-names = "main_clk";
#phy-cells = <0>;
};
pmu {
compatible = "arm,cortex-a7-pmu";
interrupt-parent = <&gpc>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>;
};
replicator {
/*
* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell"
*/
compatible = "arm,coresight-replicator";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
port@1 {
reg = <1>;
replicator_out_port1: endpoint {
remote-endpoint = <&etr_in_port>;
};
};
/* replicator input port */
port@2 {
reg = <0>;
replicator_in_port0: endpoint {
slave-mode;
remote-endpoint = <&etf_out_port>;
};
};
};
};
timer {
compatible = "arm,armv7-timer";
interrupt-parent = <&intc>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&intc>;
interrupt-parent = <&gpc>;
ranges;
funnel@30041000 {
@ -259,62 +326,18 @@
};
};
replicator {
/*
* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell"
*/
compatible = "arm,coresight-replicator";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
port@1 {
reg = <1>;
replicator_out_port1: endpoint {
remote-endpoint = <&etr_in_port>;
};
};
/* replicator input port */
port@2 {
reg = <0>;
replicator_in_port0: endpoint {
slave-mode;
remote-endpoint = <&etf_out_port>;
};
};
};
};
intc: interrupt-controller@31001000 {
compatible = "arm,cortex-a7-gic";
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
interrupt-controller;
interrupt-parent = <&intc>;
reg = <0x31001000 0x1000>,
<0x31002000 0x2000>,
<0x31004000 0x2000>,
<0x31006000 0x2000>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
aips1: aips-bus@30000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
@ -482,20 +505,49 @@
status = "disabled";
};
kpp: kpp@30320000 {
compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp";
reg = <0x30320000 0x10000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_KPP_ROOT_CLK>;
status = "disabled";
};
iomuxc: iomuxc@30330000 {
compatible = "fsl,imx7d-iomuxc";
reg = <0x30330000 0x10000>;
};
gpr: iomuxc-gpr@30340000 {
compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
compatible = "fsl,imx7d-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
reg = <0x30340000 0x10000>;
};
ocotp: ocotp-ctrl@30350000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx7d-ocotp", "syscon";
reg = <0x30350000 0x10000>;
clocks = <&clks IMX7D_OCOTP_CLK>;
tempmon_calib: calib@3c {
reg = <0x3c 0x4>;
};
tempmon_temp_grade: temp-grade@10 {
reg = <0x10 0x4>;
};
};
tempmon: tempmon {
compatible = "fsl,imx7d-tempmon";
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
fsl,tempmon =<&anatop>;
nvmem-cells = <&tempmon_calib>,
<&tempmon_temp_grade>;
nvmem-cell-names = "calib", "temp_grade";
clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
};
anatop: anatop@30360000 {
@ -504,8 +556,11 @@
reg = <0x30360000 0x10000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg_1p0d: regulator-vdd1p0d {
reg_1p0d: regulator-vdd1p0d@30360210 {
reg = <0x30360210>;
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p0d";
regulator-min-microvolt = <800000>;
@ -516,6 +571,7 @@
anatop-min-bit-val = <8>;
anatop-min-voltage = <800000>;
anatop-max-voltage = <1200000>;
anatop-enable-bit = <0>;
};
};
@ -529,12 +585,15 @@
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SNVS_CLK>;
clock-names = "snvs-rtc";
};
snvs_poweroff: snvs-poweroff {
compatible = "syscon-poweroff";
regmap = <&snvs>;
offset = <0x38>;
value = <0x60>;
mask = <0x60>;
};
@ -558,11 +617,32 @@
};
src: src@30390000 {
compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
compatible = "fsl,imx7d-src", "syscon";
reg = <0x30390000 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
gpc: gpc@303a0000 {
compatible = "fsl,imx7d-gpc";
reg = <0x303a0000 0x10000>;
interrupt-controller;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <3>;
interrupt-parent = <&intc>;
#power-domain-cells = <1>;
pgc {
#address-cells = <1>;
#size-cells = <0>;
pgc_pcie_phy: pgc-power-domain@1 {
#power-domain-cells = <0>;
reg = <1>;
power-supply = <&reg_1p0d>;
};
};
};
};
aips2: aips-bus@30400000 {
@ -609,7 +689,7 @@
clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
<&clks IMX7D_PWM1_ROOT_CLK>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};
@ -620,7 +700,7 @@
clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
<&clks IMX7D_PWM2_ROOT_CLK>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};
@ -631,7 +711,7 @@
clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
<&clks IMX7D_PWM3_ROOT_CLK>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};
@ -642,7 +722,7 @@
clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
<&clks IMX7D_PWM4_ROOT_CLK>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};
@ -664,118 +744,156 @@
reg = <0x30800000 0x400000>;
ranges;
ecspi1: ecspi@30820000 {
spba-bus@30800000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
reg = <0x30820000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
<&clks IMX7D_ECSPI1_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
#size-cells = <1>;
reg = <0x30800000 0x100000>;
ranges;
ecspi1: ecspi@30820000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
reg = <0x30820000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
<&clks IMX7D_ECSPI1_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi2: ecspi@30830000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
reg = <0x30830000 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
<&clks IMX7D_ECSPI2_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi2: ecspi@30830000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
reg = <0x30830000 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
<&clks IMX7D_ECSPI2_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi3: ecspi@30840000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
reg = <0x30840000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
<&clks IMX7D_ECSPI3_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
ecspi3: ecspi@30840000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
reg = <0x30840000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
<&clks IMX7D_ECSPI3_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
uart1: serial@30860000 {
compatible = "fsl,imx7d-uart",
"fsl,imx6q-uart";
reg = <0x30860000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_UART1_ROOT_CLK>,
<&clks IMX7D_UART1_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
uart1: serial@30860000 {
compatible = "fsl,imx7d-uart",
"fsl,imx6q-uart";
reg = <0x30860000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_UART1_ROOT_CLK>,
<&clks IMX7D_UART1_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
uart2: serial@30890000 {
compatible = "fsl,imx7d-uart",
"fsl,imx6q-uart";
reg = <0x30890000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_UART2_ROOT_CLK>,
<&clks IMX7D_UART2_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
uart2: serial@30890000 {
compatible = "fsl,imx7d-uart",
"fsl,imx6q-uart";
reg = <0x30890000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_UART2_ROOT_CLK>,
<&clks IMX7D_UART2_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
uart3: serial@30880000 {
compatible = "fsl,imx7d-uart",
"fsl,imx6q-uart";
reg = <0x30880000 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_UART3_ROOT_CLK>,
<&clks IMX7D_UART3_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
uart3: serial@30880000 {
compatible = "fsl,imx7d-uart",
"fsl,imx6q-uart";
reg = <0x30880000 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_UART3_ROOT_CLK>,
<&clks IMX7D_UART3_ROOT_CLK>;
clock-names = "ipg", "per";
status = "disabled";
};
sai1: sai@308a0000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
reg = <0x308a0000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SAI1_IPG_CLK>,
<&clks IMX7D_SAI1_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
status = "disabled";
};
sai1: sai@308a0000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
reg = <0x308a0000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SAI1_IPG_CLK>,
<&clks IMX7D_SAI1_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
status = "disabled";
};
sai2: sai@308b0000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
reg = <0x308b0000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SAI2_IPG_CLK>,
<&clks IMX7D_SAI2_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
status = "disabled";
sai2: sai@308b0000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
reg = <0x308b0000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SAI2_IPG_CLK>,
<&clks IMX7D_SAI2_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
status = "disabled";
};
sai3: sai@308c0000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
reg = <0x308c0000 0x10000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SAI3_IPG_CLK>,
<&clks IMX7D_SAI3_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
status = "disabled";
};
};
sai3: sai@308c0000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
reg = <0x308c0000 0x10000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_SAI3_IPG_CLK>,
<&clks IMX7D_SAI3_ROOT_CLK>,
<&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "rx", "tx";
dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
status = "disabled";
crypto: caam@30900000 {
compatible = "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30900000 0x40000>;
ranges = <0 0x30900000 0x40000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CAAM_CLK>,
<&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
clock-names = "ipg", "aclk";
sec_jr0: jr0@1000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr1@2000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr1@3000 {
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
};
};
flexcan1: can@30a00000 {
@ -918,24 +1036,12 @@
reg = <0x30b30200 0x200>;
};
usbphynop1: usbphynop1 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_PHY1_CLK>;
clock-names = "main_clk";
};
usbphynop3: usbphynop3 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
clock-names = "main_clk";
};
usdhc1: usdhc@30b40000 {
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>,
clocks = <&clks IMX7D_IPG_ROOT_CLK>,
<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
<&clks IMX7D_USDHC1_ROOT_CLK>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@ -946,8 +1052,8 @@
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>,
clocks = <&clks IMX7D_IPG_ROOT_CLK>,
<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
<&clks IMX7D_USDHC2_ROOT_CLK>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@ -958,8 +1064,8 @@
compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_CLK_DUMMY>,
<&clks IMX7D_CLK_DUMMY>,
clocks = <&clks IMX7D_IPG_ROOT_CLK>,
<&clks IMX7D_NAND_USDHC_BUS_ROOT_CLK>,
<&clks IMX7D_USDHC3_ROOT_CLK>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
@ -980,9 +1086,11 @@
fec1: ethernet@30be0000 {
compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
reg = <0x30be0000 0x10000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
interrupt-names = "int0", "int1", "int2", "pps";
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
<&clks IMX7D_ENET_AXI_ROOT_CLK>,
<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
@ -995,5 +1103,36 @@
status = "disabled";
};
};
dma_apbh: dma-apbh@33000000 {
compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x33000000 0x2000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
#dma-cells = <1>;
dma-channels = <4>;
clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
};
gpmi: gpmi-nand@33002000{
compatible = "fsl,imx7d-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
reg-names = "gpmi-nand", "bch";
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bch";
clocks = <&clks IMX7D_NAND_RAWNAND_CLK>,
<&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
clock-names = "gpmi_io", "gpmi_bch_apb";
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
status = "disabled";
assigned-clocks = <&clks IMX7D_NAND_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_500M_CLK>;
};
};
};

15
include/dt-bindings/clock/imx7d-clock.h
Unescape View File

@ -80,10 +80,10 @@
#define IMX7D_ARM_M4_ROOT_SRC 67
#define IMX7D_ARM_M4_ROOT_CG 68
#define IMX7D_ARM_M4_ROOT_DIV 69
#define IMX7D_ARM_M0_ROOT_CLK 70
#define IMX7D_ARM_M0_ROOT_SRC 71
#define IMX7D_ARM_M0_ROOT_CG 72
#define IMX7D_ARM_M0_ROOT_DIV 73
#define IMX7D_ARM_M0_ROOT_CLK 70 /* unused */
#define IMX7D_ARM_M0_ROOT_SRC 71 /* unused */
#define IMX7D_ARM_M0_ROOT_CG 72 /* unused */
#define IMX7D_ARM_M0_ROOT_DIV 73 /* unused */
#define IMX7D_MAIN_AXI_ROOT_CLK 74
#define IMX7D_MAIN_AXI_ROOT_SRC 75
#define IMX7D_MAIN_AXI_ROOT_CG 76
@ -450,5 +450,10 @@
#define IMX7D_CLK_ARM 437
#define IMX7D_CKIL 438
#define IMX7D_OCOTP_CLK 439
#define IMX7D_CLK_END 440
#define IMX7D_NAND_RAWNAND_CLK 440
#define IMX7D_NAND_USDHC_BUS_RAWNAND_CLK 441
#define IMX7D_SNVS_CLK 442
#define IMX7D_CAAM_CLK 443
#define IMX7D_KPP_ROOT_CLK 444
#define IMX7D_CLK_END 445
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */

16
include/dt-bindings/power/imx7-power.h
Unescape View File

@ -0,0 +1,16 @@
/*
* Copyright (C) 2017 Impinj
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __DT_BINDINGS_IMX7_POWER_H__
#define __DT_BINDINGS_IMX7_POWER_H__
#define IMX7_POWER_DOMAIN_MIPI_PHY 0
#define IMX7_POWER_DOMAIN_PCIE_PHY 1
#define IMX7_POWER_DOMAIN_USB_HSIC_PHY 2
#endif
Write Preview
Loading…
Cancel
Save