arm: v7: Kconfig: Rename CPU_V7 as CPU_V7A

Currently CPU_V7 kconfig symbol supports only ARMv7A architectures under
armv7 folder. This led to a misconception of creating separate folders
for armv7m and armv7r. There is no reason to create separate folder for
other armv7 based architectures when it can co-exist with few Kconfig
symbols.

As a first step towards a common folder, rename CPU_V7 as CPUV7A. Later
separate Kconfig symbols can be added for CPU_V7R and CPU_V7M and
can co exist in the same folder.

Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

arch/arm/Kconfig

@@ -180,7 +180,7 @@ config CPU_ARM1176
 	select HAS_VBAR
 	select SYS_CACHE_SHIFT_5
 
-config CPU_V7
+config CPU_V7A
 	bool
 	select HAS_VBAR
 	select HAS_THUMB2
@@ -207,7 +207,7 @@ config SYS_CPU
 	default "arm946es" if CPU_ARM946ES
 	default "arm1136" if CPU_ARM1136
 	default "arm1176" if CPU_ARM1176
-	default "armv7" if CPU_V7
+	default "armv7" if CPU_V7A
 	default "armv7m" if CPU_V7M
 	default "pxa" if CPU_PXA
 	default "sa1100" if CPU_SA1100
@@ -221,7 +221,7 @@ config SYS_ARM_ARCH
 	default 5 if CPU_ARM946ES
 	default 6 if CPU_ARM1136
 	default 6 if CPU_ARM1176
-	default 7 if CPU_V7
+	default 7 if CPU_V7A
 	default 7 if CPU_V7M
 	default 5 if CPU_PXA
 	default 4 if CPU_SA1100
@@ -244,7 +244,7 @@ config SYS_CACHELINE_SIZE
 
 config SYS_ARCH_TIMER
 	bool "ARM Generic Timer support"
-	depends on CPU_V7 || ARM64
+	depends on CPU_V7A || ARM64
 	default y if ARM64
 	help
 	  The ARM Generic Timer (aka arch-timer) provides an architected
@@ -254,7 +254,7 @@ config SYS_ARCH_TIMER
 
 config ARM_SMCCC
 	bool "Support for ARM SMC Calling Convention (SMCCC)"
-	depends on CPU_V7 || ARM64
+	depends on CPU_V7A || ARM64
 	select ARM_PSCI_FW
 	help
 	  Say Y here if you want to enable ARM SMC Calling Convention.
@@ -440,7 +440,7 @@ config TARGET_SPEAR600
 
 config TARGET_STV0991
 	bool "Support stv0991"
-	select CPU_V7
+	select CPU_V7A
 	select DM
 	select DM_SERIAL
 	select DM_SPI
@@ -493,36 +493,36 @@ config ARCH_BCM283X
 
 config TARGET_VEXPRESS_CA15_TC2
 	bool "Support vexpress_ca15_tc2"
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select PL011_SERIAL
 
 config TARGET_VEXPRESS_CA5X2
 	bool "Support vexpress_ca5x2"
-	select CPU_V7
+	select CPU_V7A
 	select PL011_SERIAL
 
 config TARGET_VEXPRESS_CA9X4
 	bool "Support vexpress_ca9x4"
-	select CPU_V7
+	select CPU_V7A
 	select PL011_SERIAL
 
 config TARGET_BCM23550_W1D
 	bool "Support bcm23550_w1d"
-	select CPU_V7
+	select CPU_V7A
 	imply CRC32_VERIFY
 	imply FAT_WRITE
 
 config TARGET_BCM28155_AP
 	bool "Support bcm28155_ap"
-	select CPU_V7
+	select CPU_V7A
 	imply CRC32_VERIFY
 	imply FAT_WRITE
 
 config TARGET_BCMCYGNUS
 	bool "Support bcmcygnus"
-	select CPU_V7
+	select CPU_V7A
 	imply CRC32_VERIFY
 	imply CMD_HASH
 	imply FAT_WRITE
@@ -533,7 +533,7 @@ config TARGET_BCMCYGNUS
 
 config TARGET_BCMNSP
 	bool "Support bcmnsp"
-	select CPU_V7
+	select CPU_V7A
 
 config TARGET_BCMNS2
 	bool "Support Broadcom Northstar2"
@@ -557,7 +557,7 @@ config ARCH_EXYNOS
 
 config ARCH_S5PC1XX
 	bool "Samsung S5PC1XX"
-	select CPU_V7
+	select CPU_V7A
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
@@ -565,7 +565,7 @@ config ARCH_S5PC1XX
 
 config ARCH_HIGHBANK
 	bool "Calxeda Highbank"
-	select CPU_V7
+	select CPU_V7A
 	select PL011_SERIAL
 
 config ARCH_INTEGRATOR
@@ -576,7 +576,7 @@ config ARCH_INTEGRATOR
 
 config ARCH_KEYSTONE
 	bool "TI Keystone"
-	select CPU_V7
+	select CPU_V7A
 	select SUPPORT_SPL
 	select SYS_THUMB_BUILD
 	select CMD_POWEROFF
@@ -587,7 +587,7 @@ config ARCH_KEYSTONE
 
 config ARCH_OMAP2PLUS
 	bool "TI OMAP2+"
-	select CPU_V7
+	select CPU_V7A
 	select SPL_BOARD_INIT if SPL
 	select SPL_STACK_R if SPL
 	select SUPPORT_SPL
@@ -626,13 +626,13 @@ config ARCH_MX28
 
 config ARCH_MX7ULP
         bool "NXP MX7ULP"
-        select CPU_V7
+	select CPU_V7A
 	select ROM_UNIFIED_SECTIONS
 	imply MXC_GPIO
 
 config ARCH_MX7
 	bool "Freescale MX7"
-	select CPU_V7
+	select CPU_V7A
 	select SYS_FSL_HAS_SEC if SECURE_BOOT
 	select SYS_FSL_SEC_COMPAT_4
 	select SYS_FSL_SEC_LE
@@ -642,7 +642,7 @@ config ARCH_MX7
 
 config ARCH_MX6
 	bool "Freescale MX6"
-	select CPU_V7
+	select CPU_V7A
 	select SYS_FSL_HAS_SEC if SECURE_BOOT
 	select SYS_FSL_SEC_COMPAT_4
 	select SYS_FSL_SEC_LE
@@ -656,7 +656,7 @@ endif
 
 config ARCH_MX5
 	bool "Freescale MX5"
-	select CPU_V7
+	select CPU_V7A
 	select BOARD_EARLY_INIT_F
 	imply MXC_GPIO
 
@@ -692,7 +692,7 @@ config ARCH_SNAPDRAGON
 
 config ARCH_SOCFPGA
 	bool "Altera SOCFPGA family"
-	select CPU_V7
+	select CPU_V7A
 	select SUPPORT_SPL
 	select OF_CONTROL
 	select SPL_OF_CONTROL
@@ -750,7 +750,7 @@ config ARCH_SUNXI
 
 config ARCH_VF610
 	bool "Freescale Vybrid"
-	select CPU_V7
+	select CPU_V7A
 	select SYS_FSL_ERRATUM_ESDHC111
 	imply CMD_MTDPARTS
 	imply NAND
@@ -758,7 +758,7 @@ config ARCH_VF610
 config ARCH_ZYNQ
 	bool "Xilinx Zynq based platform"
 	select BOARD_LATE_INIT
-	select CPU_V7
+	select CPU_V7A
 	select SUPPORT_SPL
 	select OF_CONTROL
 	select SPL_BOARD_INIT if SPL
@@ -1000,7 +1000,7 @@ config TARGET_LS1088ARDB
 config TARGET_LS1021AQDS
 	bool "Support ls1021aqds"
 	select BOARD_LATE_INIT
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select SUPPORT_SPL
@@ -1014,7 +1014,7 @@ config TARGET_LS1021AQDS
 config TARGET_LS1021ATWR
 	bool "Support ls1021atwr"
 	select BOARD_LATE_INIT
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select SUPPORT_SPL
@@ -1027,7 +1027,7 @@ config TARGET_LS1021ATWR
 config TARGET_LS1021AIOT
 	bool "Support ls1021aiot"
 	select BOARD_LATE_INIT
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select SUPPORT_SPL
@@ -1143,7 +1143,7 @@ config STM32
 
 config ARCH_STI
 	bool "Support STMicrolectronics SoCs"
-	select CPU_V7
+	select CPU_V7A
 	select DM
 	select DM_SERIAL
 	select BLK

arch/arm/Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0+
 
 ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TEGRA),yy)
-CONFIG_CPU_V7=
+CONFIG_CPU_V7A=
 CONFIG_CPU_ARM720T=y
 endif
 
@@ -14,7 +14,7 @@ arch-$(CONFIG_CPU_SA1100)	=-march=armv4
 arch-$(CONFIG_CPU_PXA)		=
 arch-$(CONFIG_CPU_ARM1136)	=-march=armv5
 arch-$(CONFIG_CPU_ARM1176)	=-march=armv5t
-arch-$(CONFIG_CPU_V7)		=$(call cc-option, -march=armv7-a, \
+arch-$(CONFIG_CPU_V7A)		=$(call cc-option, -march=armv7-a, \
 				 $(call cc-option, -march=armv7, -march=armv5))
 arch-$(CONFIG_ARM64)		=-march=armv8-a
 
@@ -38,7 +38,7 @@ tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
 tune-$(CONFIG_CPU_PXA)		=-mcpu=xscale
 tune-$(CONFIG_CPU_ARM1136)	=
 tune-$(CONFIG_CPU_ARM1176)	=
-tune-$(CONFIG_CPU_V7)		=
+tune-$(CONFIG_CPU_V7A)		=
 tune-$(CONFIG_ARM64)		=
 
 # Evaluate tune cc-option calls now

arch/arm/cpu/armv7/Kconfig

@@ -1,4 +1,4 @@
-if CPU_V7
+if CPU_V7A
 
 config CPU_V7_HAS_NONSEC
         bool
@@ -52,7 +52,7 @@ config ARMV7_PSCI_NR_CPUS
 
 config ARMV7_LPAE
 	bool "Use LPAE page table format" if EXPERT
-	depends on CPU_V7
+	depends on CPU_V7A
 	default n
 	---help---
 	Say Y here to use the long descriptor page table format. This is

arch/arm/include/asm/system.h

@@ -451,7 +451,7 @@ enum dcache_option {
 	DCACHE_WRITEBACK = TTB_SECT | TTB_SECT_MAIR(2),
 	DCACHE_WRITEALLOC = TTB_SECT | TTB_SECT_MAIR(3),
 };
-#elif defined(CONFIG_CPU_V7)
+#elif defined(CONFIG_CPU_V7A)
 /* Short-Descriptor Translation Table Level 1 Bits */
 #define TTB_SECT_NS_MASK	(1 << 19)
 #define TTB_SECT_NG_MASK	(1 << 17)
@@ -493,7 +493,7 @@ enum {
 	MMU_SECTION_SIZE	= 1 << MMU_SECTION_SHIFT,
 };
 
-#ifdef CONFIG_CPU_V7
+#ifdef CONFIG_CPU_V7A
 /* TTBR0 bits */
 #define TTBR0_BASE_ADDR_MASK	0xFFFFC000
 #define TTBR0_RGN_NC			(0 << 3)

arch/arm/lib/cache-cp15.c

@@ -160,7 +160,7 @@ static inline void mmu_setup(void)
 		asm volatile("mcr p15, 0, %0, c10, c2, 0"
 			: : "r" (MEMORY_ATTRIBUTES) : "memory");
 	}
-#elif defined(CONFIG_CPU_V7)
+#elif defined(CONFIG_CPU_V7A)
 	if (is_hyp()) {
 		/* Set HTCR to disable LPAE */
 		asm volatile("mcr p15, 4, %0, c2, c0, 2"

arch/arm/mach-at91/Kconfig

@@ -45,15 +45,15 @@ config AT91SAM9X5
 
 config SAMA5D2
 	bool
-	select CPU_V7
+	select CPU_V7A
 
 config SAMA5D3
 	bool
-	select CPU_V7
+	select CPU_V7A
 
 config SAMA5D4
 	bool
-	select CPU_V7
+	select CPU_V7A
 
 choice
 	prompt "Atmel AT91 board select"
@@ -159,7 +159,7 @@ config TARGET_SAMA5D2_XPLAINED
 
 config TARGET_SAMA5D27_SOM1_EK
 	bool "SAMA5D27 SOM1 EK board"
-	select CPU_V7
+	select CPU_V7A
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
 	select BOARD_LATE_INIT
@@ -254,7 +254,7 @@ config TARGET_WB45N
 config TARGET_WB50N
 	bool "Support Laird WB50N"
 	select BOARD_LATE_INIT
-	select CPU_V7
+	select CPU_V7A
 	select SUPPORT_SPL
 	select BOARD_EARLY_INIT_F
 
@@ -297,6 +297,6 @@ source "board/laird/wb50n/Kconfig"
 
 config SPL_LDSCRIPT
 	default "arch/arm/mach-at91/arm926ejs/u-boot-spl.lds" if CPU_ARM926EJS
-	default "arch/arm/mach-at91/armv7/u-boot-spl.lds" if CPU_V7
+	default "arch/arm/mach-at91/armv7/u-boot-spl.lds" if CPU_V7A
 
 endif

arch/arm/mach-at91/Makefile

@@ -16,4 +16,4 @@ endif
 obj-y += clock.o
 obj-$(CONFIG_CPU_ARM920T)	+= arm920t/
 obj-$(CONFIG_CPU_ARM926EJS)	+= arm926ejs/
-obj-$(CONFIG_CPU_V7)		+= armv7/
+obj-$(CONFIG_CPU_V7A)		+= armv7/

arch/arm/mach-at91/config.mk

@@ -2,7 +2,7 @@ ifeq ($(CONFIG_CPU_ARM926EJS),y)
 PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,)
 endif
 
-ifeq ($(CONFIG_CPU_V7),y)
+ifeq ($(CONFIG_CPU_V7A),y)
 ifndef CONFIG_SPL_BUILD
 ALL-y	+= u-boot.img
 endif

arch/arm/mach-bcm283x/Kconfig

@@ -7,7 +7,7 @@ config BCM2836
 	bool "Broadcom BCM2836 SoC support"
 	depends on ARCH_BCM283X
 	select ARMV7_LPAE
-	select CPU_V7
+	select CPU_V7A
 
 config BCM2837
 	bool "Broadcom BCM2837 SoC support"
@@ -18,7 +18,7 @@ config BCM2837_32B
 	depends on ARCH_BCM283X
 	select BCM2837
 	select ARMV7_LPAE
-	select CPU_V7
+	select CPU_V7A
 
 config BCM2837_64B
 	bool "Broadcom BCM2837 SoC 64-bit support"

arch/arm/mach-exynos/Kconfig

@@ -6,7 +6,7 @@ choice
 
 config ARCH_EXYNOS4
 	bool "Exynos4 SoC family"
-	select CPU_V7
+	select CPU_V7A
 	select BOARD_EARLY_INIT_F
 	help
 	  Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There
@@ -15,7 +15,7 @@ config ARCH_EXYNOS4
 
 config ARCH_EXYNOS5
 	bool "Exynos5 SoC family"
-	select CPU_V7
+	select CPU_V7A
 	select BOARD_EARLY_INIT_F
 	select SHA_HW_ACCEL
 	imply CRC32_VERIFY

arch/arm/mach-exynos/Makefile

@@ -4,7 +4,7 @@
 # Minkyu Kang <mk7.kang@samsung.com>
 
 obj-y	+= soc.o
-obj-$(CONFIG_CPU_V7) += clock.o pinmux.o power.o system.o
+obj-$(CONFIG_CPU_V7A) += clock.o pinmux.o power.o system.o
 obj-$(CONFIG_ARM64)	+= mmu-arm64.o
 
 obj-$(CONFIG_EXYNOS5420)	+= sec_boot.o

arch/arm/mach-exynos/soc.c

@@ -20,7 +20,7 @@ void *secondary_boot_addr = (void *)_main;
 
 void reset_cpu(ulong addr)
 {
-#ifdef CONFIG_CPU_V7
+#ifdef CONFIG_CPU_V7A
 	writel(0x1, samsung_get_base_swreset());
 #endif
 }

arch/arm/mach-mvebu/Kconfig

@@ -6,7 +6,7 @@ config HAVE_MVEBU_EFUSE
 
 config ARMADA_32BIT
 	bool
-	select CPU_V7
+	select CPU_V7A
 	select SUPPORT_SPL
 	select SPL_DM
 	select SPL_DM_SEQ_ALIAS

arch/arm/mach-qemu/Kconfig

@@ -14,7 +14,7 @@ endif
 config TARGET_QEMU_ARM_32BIT
 	bool "Support qemu_arm"
 	depends on ARCH_QEMU
-	select CPU_V7
+	select CPU_V7A
 	select ARCH_SUPPORT_PSCI
 	select SYS_ARCH_TIMER
 

arch/arm/mach-rmobile/Kconfig

@@ -6,7 +6,7 @@ choice
 
 config RCAR_32
 	bool "Renesas ARM SoCs R-Car Gen1/Gen2 (32bit)"
-	select CPU_V7
+	select CPU_V7A
 
 config RCAR_GEN3
 	bool "Renesas ARM SoCs R-Car Gen3 (64bit)"

arch/arm/mach-rockchip/Kconfig

@@ -2,7 +2,7 @@ if ARCH_ROCKCHIP
 
 config ROCKCHIP_RK3036
 	bool "Support Rockchip RK3036"
-	select CPU_V7
+	select CPU_V7A
 	select SUPPORT_SPL
 	select SPL
 	imply USB_FUNCTION_ROCKUSB
@@ -15,7 +15,7 @@ config ROCKCHIP_RK3036
 
 config ROCKCHIP_RK3128
 	bool "Support Rockchip RK3128"
-	select CPU_V7
+	select CPU_V7A
 	help
 	  The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7
 	  including NEON and GPU, Mali-400 graphics, several DDR3 options
@@ -24,7 +24,7 @@ config ROCKCHIP_RK3128
 
 config ROCKCHIP_RK3188
 	bool "Support Rockchip RK3188"
-	select CPU_V7
+	select CPU_V7A
 	select SPL_BOARD_INIT if SPL
 	select SUPPORT_SPL
 	select SPL
@@ -46,7 +46,7 @@ config ROCKCHIP_RK3188
 
 config ROCKCHIP_RK322X
 	bool "Support Rockchip RK3228/RK3229"
-	select CPU_V7
+	select CPU_V7A
 	select SUPPORT_SPL
 	select SPL
 	select ROCKCHIP_BROM_HELPER
@@ -59,7 +59,7 @@ config ROCKCHIP_RK322X
 
 config ROCKCHIP_RK3288
 	bool "Support Rockchip RK3288"
-	select CPU_V7
+	select CPU_V7A
 	select SPL_BOARD_INIT if SPL
 	select SUPPORT_SPL
 	select SPL
@@ -151,7 +151,7 @@ config ROCKCHIP_RK3399
 
 config ROCKCHIP_RV1108
 	bool "Support Rockchip RV1108"
-	select CPU_V7
+	select CPU_V7A
 	help
 	  The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7
 	  and a DSP.

arch/arm/mach-stm32mp/Kconfig

@@ -25,7 +25,7 @@ config SYS_SOC
 config TARGET_STM32MP1
 	bool "Support stm32mp1xx"
 	select ARCH_SUPPORT_PSCI
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select PINCTRL_STM32

arch/arm/mach-sunxi/Kconfig

@@ -136,7 +136,7 @@ choice
 
 config MACH_SUN4I
 	bool "sun4i (Allwinner A10)"
-	select CPU_V7
+	select CPU_V7A
 	select ARM_CORTEX_CPU_IS_UP
 	select DRAM_SUN4I
 	select SUNXI_GEN_SUN4I
@@ -144,7 +144,7 @@ config MACH_SUN4I
 
 config MACH_SUN5I
 	bool "sun5i (Allwinner A13)"
-	select CPU_V7
+	select CPU_V7A
 	select ARM_CORTEX_CPU_IS_UP
 	select DRAM_SUN4I
 	select SUNXI_GEN_SUN4I
@@ -153,7 +153,7 @@ config MACH_SUN5I
 
 config MACH_SUN6I
 	bool "sun6i (Allwinner A31)"
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
@@ -166,7 +166,7 @@ config MACH_SUN6I
 
 config MACH_SUN7I
 	bool "sun7i (Allwinner A20)"
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
@@ -177,7 +177,7 @@ config MACH_SUN7I
 
 config MACH_SUN8I_A23
 	bool "sun8i (Allwinner A23)"
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
@@ -189,7 +189,7 @@ config MACH_SUN8I_A23
 
 config MACH_SUN8I_A33
 	bool "sun8i (Allwinner A33)"
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
@@ -201,7 +201,7 @@ config MACH_SUN8I_A33
 
 config MACH_SUN8I_A83T
 	bool "sun8i (Allwinner A83T)"
-	select CPU_V7
+	select CPU_V7A
 	select DRAM_SUN8I_A83T
 	select SUNXI_GEN_SUN6I
 	select MMC_SUNXI_HAS_NEW_MODE
@@ -209,7 +209,7 @@ config MACH_SUN8I_A83T
 
 config MACH_SUN8I_H3
 	bool "sun8i (Allwinner H3)"
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
@@ -218,7 +218,7 @@ config MACH_SUN8I_H3
 
 config MACH_SUN8I_R40
 	bool "sun8i (Allwinner R40)"
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
@@ -229,7 +229,7 @@ config MACH_SUN8I_R40
 
 config MACH_SUN8I_V3S
 	bool "sun8i (Allwinner V3s)"
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
@@ -241,7 +241,7 @@ config MACH_SUN8I_V3S
 
 config MACH_SUN9I
 	bool "sun9i (Allwinner A80)"
-	select CPU_V7
+	select CPU_V7A
 	select DRAM_SUN9I
 	select SUN6I_PRCM
 	select SUNXI_HIGH_SRAM

arch/arm/mach-tegra/Kconfig

@@ -50,7 +50,7 @@ config TEGRA_NO_BPMP
 
 config TEGRA_ARMV7_COMMON
 	bool "Tegra 32-bit common options"
-	select CPU_V7
+	select CPU_V7A
 	select SPL
 	select SPL_BOARD_INIT if SPL
 	select SUPPORT_SPL

arch/arm/mach-uniphier/Kconfig

@@ -5,7 +5,7 @@ config SYS_CONFIG_NAME
 
 config ARCH_UNIPHIER_32BIT
 	bool
-	select CPU_V7
+	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select ARMV7_NONSEC
 	select ARCH_SUPPORT_PSCI

arch/arm/mach-uniphier/Makefile

@@ -31,5 +31,5 @@ obj-y += dram/
 
 obj-$(CONFIG_DEBUG_UART_UNIPHIER) += debug-uart/
 
-obj-$(CONFIG_CPU_V7) += arm32/
+obj-$(CONFIG_CPU_V7A) += arm32/
 obj-$(CONFIG_ARM64) += arm64/

cmd/Kconfig

@@ -1103,7 +1103,7 @@ config BOOTP_PXE_CLIENTARCH
 config BOOTP_VCI_STRING
 	string
 	depends on CMD_BOOTP
-	default "U-Boot.armv7" if CPU_V7 || CPU_V7M
+	default "U-Boot.armv7" if CPU_V7A || CPU_V7M
 	default "U-Boot.armv8" if ARM64
 	default "U-Boot.arm" if ARM
 	default "U-Boot"

drivers/serial/arm_dcc.c

@@ -19,7 +19,7 @@
 #include <dm.h>
 #include <serial.h>
 
-#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V7)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V7A)
 /*
  * ARMV6 & ARMV7
  */