Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge branch 'master' of git://git.denx.de/u-boot-mips

Browse Source
master
Tom Rini 11 years ago
parent 794d5f5540 ed638b6af2
commit adcdeacc3e
40 changed files with 83 additions and 6119 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 44
      MAKEALL
  2. 6
      README
  3. 5
      arch/mips/config.mk
  4. 9
      arch/mips/cpu/mips32/incaip/Makefile
  5. 300
      arch/mips/cpu/mips32/incaip/asc_serial.c
  6. 177
      arch/mips/cpu/mips32/incaip/asc_serial.h
  7. 8
      arch/mips/cpu/mips32/incaip/config.mk
  8. 100
      arch/mips/cpu/mips32/incaip/incaip_clock.c
  9. 55
      arch/mips/cpu/mips32/incaip/incaip_wdt.S
  10. 5
      arch/mips/cpu/mips32/interrupts.c
  11. 5
      arch/mips/cpu/mips64/interrupts.c
  12. 57
      arch/mips/cpu/u-boot.lds
  13. 9
      arch/mips/cpu/xburst/Makefile
  14. 16
      arch/mips/cpu/xburst/config.mk
  15. 136
      arch/mips/cpu/xburst/cpu.c
  16. 235
      arch/mips/cpu/xburst/jz4740.c
  17. 118
      arch/mips/cpu/xburst/jz_serial.c
  18. 179
      arch/mips/cpu/xburst/start.S
  19. 149
      arch/mips/cpu/xburst/timer.c
  20. 2430
      arch/mips/include/asm/inca-ip.h
  21. 2
      arch/mips/include/asm/u-boot-mips.h
  22. 9
      arch/mips/include/asm/u-boot.h
  23. 4
      arch/mips/lib/Makefile
  24. 9
      arch/mips/lib/board.c
  25. 12
      arch/mips/lib/io.c
  26. 9
      board/incaip/Makefile
  27. 57
      board/incaip/README
  28. 16
      board/incaip/config.mk
  29. 655
      board/incaip/flash.c
  30. 110
      board/incaip/incaip.c
  31. 287
      board/incaip/lowlevel_init.S
  32. 4
      boards.cfg
  33. 6
      common/board_f.c
  34. 1
      doc/README.scrapyard
  35. 1
      drivers/net/Makefile
  36. 793
      drivers/net/inca-ip_sw.c
  37. 3
      include/common.h
  38. 177
      include/configs/incaip.h
  39. 3
      include/configs/malta.h
  40. 1
      include/netdev.h

44
MAKEALL
Unescape View File

@ -418,51 +418,9 @@ LIST_arm="$(targets_by_arch arm | \
## MIPS Systems (default = big endian)
#########################################################################
LIST_mips4kc=" \
incaip \
incaip_100MHz \
incaip_133MHz \
incaip_150MHz \
qemu_mips \
vct_platinum \
vct_platinum_small \
vct_platinum_onenand \
vct_platinum_onenand_small \
vct_platinumavc \
vct_platinumavc_small \
vct_platinumavc_onenand \
vct_platinumavc_onenand_small \
vct_premium \
vct_premium_small \
vct_premium_onenand \
vct_premium_onenand_small \
"
LIST_au1xx0=" \
dbau1000 \
dbau1100 \
dbau1500 \
dbau1550 \
"
LIST_mips=" \
${LIST_mips4kc} \
${LIST_mips5kc} \
${LIST_au1xx0} \
"
LIST_mips="$(targets_by_arch mips)"
#########################################################################
## MIPS Systems (little endian)
#########################################################################
LIST_au1xx0_el=" \
dbau1550_el \
pb1000 \
"
LIST_mips_el=" \
${LIST_au1xx0_el} \
"
#########################################################################
## OpenRISC Systems
#########################################################################

6
README
Unescape View File

@ -132,6 +132,10 @@ Directory Hierarchy:
====================
/arch Architecture specific files
/arc Files generic to ARC architecture
/cpu CPU specific files
/arc700 Files specific to ARC 700 CPUs
/lib Architecture specific library files
/arm Files generic to ARM architecture
/cpu CPU specific files
/arm720t Files specific to ARM 720 CPUs
@ -164,7 +168,7 @@ Directory Hierarchy:
/mips Files generic to MIPS architecture
/cpu CPU specific files
/mips32 Files specific to MIPS32 CPUs
/xburst Files specific to Ingenic XBurst CPUs
/mips64 Files specific to MIPS64 CPUs
/lib Architecture specific library files
/nds32 Files generic to NDS32 architecture
/cpu CPU specific files

5
arch/mips/config.mk
Unescape View File

@ -27,6 +27,8 @@ ENDIANNESS ?= -EB
PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__
__HAVE_ARCH_GENERIC_BOARD := y
#
# From Linux arch/mips/Makefile
#
@ -52,4 +54,5 @@ PLATFORM_CPPFLAGS += -msoft-float
PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib $(ENDIANNESS)
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
LDFLAGS_FINAL += --gc-sections -pie
OBJCOPYFLAGS += --remove-section=.dynsym
OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .got
OBJCOPYFLAGS += -j .u_boot_list -j .rel.dyn

9
arch/mips/cpu/mips32/incaip/Makefile
Unescape View File

@ -1,9 +0,0 @@
#
# (C) Copyright 2011
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y = incaip_wdt.o
obj-y += incaip_clock.o asc_serial.o

300
arch/mips/cpu/mips32/incaip/asc_serial.c
Unescape View File

@ -1,300 +0,0 @@
/*
* (INCA) ASC UART support
*/
#include <config.h>
#include <common.h>
#include <asm/inca-ip.h>
#include <serial.h>
#include <linux/compiler.h>
#include "asc_serial.h"
#define SET_BIT(reg, mask) reg |= (mask)
#define CLEAR_BIT(reg, mask) reg &= (~mask)
#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
#define SET_BITS(reg, mask) SET_BIT(reg, mask)
#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
extern uint incaip_get_fpiclk(void);
static int serial_setopt (void);
/* pointer to ASC register base address */
static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC;
/******************************************************************************
*
* serial_init - initialize a INCAASC channel
*
* This routine initializes the number of data bits, parity
* and set the selected baud rate. Interrupts are disabled.
* Set the modem control signals if the option is selected.
*
* RETURNS: N/A
*/
static int asc_serial_init(void)
{
/* we have to set PMU.EN13 bit to enable an ASC device*/
INCAASC_PMU_ENABLE(13);
/* and we have to set CLC register*/
CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
SET_BITFIELD(pAsc->asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001);
/* initialy we are in async mode */
pAsc->asc_con = ASCCON_M_8ASYNC;
/* select input port */
pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
/* TXFIFO's filling level */
SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
/* enable TXFIFO */
SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXFEN);
/* RXFIFO's filling level */
SET_BITFIELD(pAsc->asc_txfcon, ASCRXFCON_RXFITLMASK,
ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
/* enable RXFIFO */
SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
/* enable error signals */
SET_BIT(pAsc->asc_con, ASCCON_FEN);
SET_BIT(pAsc->asc_con, ASCCON_OEN);
/* acknowledge ASC interrupts */
ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
/* disable ASC interrupts */
ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
/* set FIFOs into the transparent mode */
SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
/* set baud rate */
serial_setbrg();
/* set the options */
serial_setopt();
return 0;
}
static void asc_serial_setbrg(void)
{
ulong uiReloadValue, fdv;
ulong f_ASC;
f_ASC = incaip_get_fpiclk();
#ifndef INCAASC_USE_FDV
fdv = 2;
uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
#else
fdv = INCAASC_FDV_HIGH_BAUDRATE;
uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
#endif /* INCAASC_USE_FDV */
if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
{
#ifndef INCAASC_USE_FDV
fdv = 3;
uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
#else
fdv = INCAASC_FDV_LOW_BAUDRATE;
uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
#endif /* INCAASC_USE_FDV */
if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
{
return; /* can't impossibly generate that baud rate */
}
}
/* Disable Baud Rate Generator; BG should only be written when R=0 */
CLEAR_BIT(pAsc->asc_con, ASCCON_R);
#ifndef INCAASC_USE_FDV
/*
* Disable Fractional Divider (FDE)
* Divide clock by reload-value + constant (BRS)
*/
/* FDE = 0 */
CLEAR_BIT(pAsc->asc_con, ASCCON_FDE);
if ( fdv == 2 )
CLEAR_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 0 */
else
SET_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 1 */
#else /* INCAASC_USE_FDV */
/* Enable Fractional Divider */
SET_BIT(pAsc->asc_con, ASCCON_FDE); /* FDE = 1 */
/* Set fractional divider value */
pAsc->asc_fdv = fdv & ASCFDV_VALUE_MASK;
#endif /* INCAASC_USE_FDV */
/* Set reload value in BG */
pAsc->asc_bg = uiReloadValue;
/* Enable Baud Rate Generator */
SET_BIT(pAsc->asc_con, ASCCON_R); /* R = 1 */
}
/*******************************************************************************
*
* serial_setopt - set the serial options
*
* Set the channel operating mode to that specified. Following options
* are supported: CREAD, CSIZE, PARENB, and PARODD.
*
* Note, this routine disables the transmitter. The calling routine
* may have to re-enable it.
*
* RETURNS:
* Returns 0 to indicate success, otherwise -1 is returned
*/
static int serial_setopt (void)
{
ulong con;
switch ( ASC_OPTIONS & ASCOPT_CSIZE )
{
/* 7-bit-data */
case ASCOPT_CS7:
con = ASCCON_M_7ASYNCPAR; /* 7-bit-data and parity bit */
break;
/* 8-bit-data */
case ASCOPT_CS8:
if ( ASC_OPTIONS & ASCOPT_PARENB )
con = ASCCON_M_8ASYNCPAR; /* 8-bit-data and parity bit */
else
con = ASCCON_M_8ASYNC; /* 8-bit-data no parity */
break;
/*
* only 7 and 8-bit frames are supported
* if we don't use IOCTL extensions
*/
default:
return -1;
}
if ( ASC_OPTIONS & ASCOPT_STOPB )
SET_BIT(con, ASCCON_STP); /* 2 stop bits */
else
CLEAR_BIT(con, ASCCON_STP); /* 1 stop bit */
if ( ASC_OPTIONS & ASCOPT_PARENB )
SET_BIT(con, ASCCON_PEN); /* enable parity checking */
else
CLEAR_BIT(con, ASCCON_PEN); /* disable parity checking */
if ( ASC_OPTIONS & ASCOPT_PARODD )
SET_BIT(con, ASCCON_ODD); /* odd parity */
else
CLEAR_BIT(con, ASCCON_ODD); /* even parity */
if ( ASC_OPTIONS & ASCOPT_CREAD )
SET_BIT(pAsc->asc_whbcon, ASCWHBCON_SETREN); /* Receiver enable */
pAsc->asc_con |= con;
return 0;
}
static void asc_serial_putc(const char c)
{
uint txFl = 0;
if (c == '\n') serial_putc ('\r');
/* check do we have a free space in the TX FIFO */
/* get current filling level */
do
{
txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
}
while ( txFl == INCAASC_TXFIFO_FULL );
pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
/* check for errors */
if ( pAsc->asc_con & ASCCON_OE )
{
SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
return;
}
}
static int asc_serial_getc(void)
{
ulong symbol_mask;
char c;
while (!serial_tstc());
symbol_mask =
((ASC_OPTIONS & ASCOPT_CSIZE) == ASCOPT_CS7) ? (0x7f) : (0xff);
c = (char)(pAsc->asc_rbuf & symbol_mask);
return c;
}
static int asc_serial_tstc(void)
{
int res = 1;
if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
{
res = 0;
}
else if ( pAsc->asc_con & ASCCON_FE )
{
SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
res = 0;
}
else if ( pAsc->asc_con & ASCCON_PE )
{
SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRPE);
res = 0;
}
else if ( pAsc->asc_con & ASCCON_OE )
{
SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
res = 0;
}
return res;
}
static struct serial_device asc_serial_drv = {
.name = "asc_serial",
.start = asc_serial_init,
.stop = NULL,
.setbrg = asc_serial_setbrg,
.putc = asc_serial_putc,
.puts = default_serial_puts,
.getc = asc_serial_getc,
.tstc = asc_serial_tstc,
};
void asc_serial_initialize(void)
{
serial_register(&asc_serial_drv);
}
__weak struct serial_device *default_serial_console(void)
{
return &asc_serial_drv;
}

177
arch/mips/cpu/mips32/incaip/asc_serial.h
Unescape View File

@ -1,177 +0,0 @@
/* incaAscSio.h - (INCA) ASC UART tty driver header */
#ifndef __INCincaAscSioh
#define __INCincaAscSioh
#include <asm/inca-ip.h>
/* channel operating modes */
#define ASCOPT_CSIZE 0x00000003
#define ASCOPT_CS7 0x00000001
#define ASCOPT_CS8 0x00000002
#define ASCOPT_PARENB 0x00000004
#define ASCOPT_STOPB 0x00000008
#define ASCOPT_PARODD 0x00000010
#define ASCOPT_CREAD 0x00000020
#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8)
/* ASC input select (0 or 1) */
#define CONSOLE_TTY 0
/* use fractional divider for baudrate settings */
#define INCAASC_USE_FDV
#ifdef INCAASC_USE_FDV
#define INCAASC_FDV_LOW_BAUDRATE 71
#define INCAASC_FDV_HIGH_BAUDRATE 453
#endif /*INCAASC_USE_FDV*/
#define INCAASC_TXFIFO_FL 1
#define INCAASC_RXFIFO_FL 1
#define INCAASC_TXFIFO_FULL 16
/* interrupt lines masks for the ASC device interrupts*/
/* change these macroses if it's necessary */
#define INCAASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */
#define INCAASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */
#define INCAASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */
#define INCAASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */
#define INCAASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/
/* interrupt controller access macros */
#define ASC_INTERRUPTS_ENABLE(X) \
*((volatile unsigned int*) INCA_IP_ICU_IM2_IER) |= X;
#define ASC_INTERRUPTS_DISABLE(X) \
*((volatile unsigned int*) INCA_IP_ICU_IM2_IER) &= ~X;
#define ASC_INTERRUPTS_CLEAR(X) \
*((volatile unsigned int*) INCA_IP_ICU_IM2_ISR) = X;
/* CLC register's bits and bitfields */
#define ASCCLC_DISR 0x00000001
#define ASCCLC_DISS 0x00000002
#define ASCCLC_RMCMASK 0x0000FF00
#define ASCCLC_RMCOFFSET 8
/* CON register's bits and bitfields */
#define ASCCON_MODEMASK 0x0007
#define ASCCON_M_8SYNC 0x0
#define ASCCON_M_8ASYNC 0x1
#define ASCCON_M_8IRDAASYNC 0x2
#define ASCCON_M_7ASYNCPAR 0x3
#define ASCCON_M_9ASYNC 0x4
#define ASCCON_M_8WAKEUPASYNC 0x5
#define ASCCON_M_8ASYNCPAR 0x7
#define ASCCON_STP 0x0008
#define ASCCON_REN 0x0010
#define ASCCON_PEN 0x0020
#define ASCCON_FEN 0x0040
#define ASCCON_OEN 0x0080
#define ASCCON_PE 0x0100
#define ASCCON_FE 0x0200
#define ASCCON_OE 0x0400
#define ASCCON_FDE 0x0800
#define ASCCON_ODD 0x1000
#define ASCCON_BRS 0x2000
#define ASCCON_LB 0x4000
#define ASCCON_R 0x8000
/* WHBCON register's bits and bitfields */
#define ASCWHBCON_CLRREN 0x0010
#define ASCWHBCON_SETREN 0x0020
#define ASCWHBCON_CLRPE 0x0100
#define ASCWHBCON_CLRFE 0x0200
#define ASCWHBCON_CLROE 0x0400
#define ASCWHBCON_SETPE 0x0800
#define ASCWHBCON_SETFE 0x1000
#define ASCWHBCON_SETOE 0x2000
/* ABCON register's bits and bitfields */
#define ASCABCON_ABEN 0x0001
#define ASCABCON_AUREN 0x0002
#define ASCABCON_ABSTEN 0x0004
#define ASCABCON_ABDETEN 0x0008
#define ASCABCON_FCDETEN 0x0010
#define ASCABCON_EMMASK 0x0300
#define ASCABCON_EMOFF 8
#define ASCABCON_EM_DISAB 0x0
#define ASCABCON_EM_DURAB 0x1
#define ASCABCON_EM_ALWAYS 0x2
#define ASCABCON_TXINV 0x0400
#define ASCABCON_RXINV 0x0800
/* FDV register mask, offset and bitfields*/
#define ASCFDV_VALUE_MASK 0x000001FF
/* WHBABCON register's bits and bitfields */
#define ASCWHBABCON_SETABEN 0x0001
#define ASCWHBABCON_CLRABEN 0x0002
/* ABSTAT register's bits and bitfields */
#define ASCABSTAT_FCSDET 0x0001
#define ASCABSTAT_FCCDET 0x0002
#define ASCABSTAT_SCSDET 0x0004
#define ASCABSTAT_SCCDET 0x0008
#define ASCABSTAT_DETWAIT 0x0010
/* WHBABSTAT register's bits and bitfields */
#define ASCWHBABSTAT_CLRFCSDET 0x0001
#define ASCWHBABSTAT_SETFCSDET 0x0002
#define ASCWHBABSTAT_CLRFCCDET 0x0004
#define ASCWHBABSTAT_SETFCCDET 0x0008
#define ASCWHBABSTAT_CLRSCSDET 0x0010
#define ASCWHBABSTAT_SETSCSDET 0x0020
#define ASCWHBABSTAT_SETSCCDET 0x0040
#define ASCWHBABSTAT_CLRSCCDET 0x0080
#define ASCWHBABSTAT_CLRDETWAIT 0x0100
#define ASCWHBABSTAT_SETDETWAIT 0x0200
/* TXFCON register's bits and bitfields */
#define ASCTXFCON_TXFEN 0x0001
#define ASCTXFCON_TXFFLU 0x0002
#define ASCTXFCON_TXTMEN 0x0004
#define ASCTXFCON_TXFITLMASK 0x3F00
#define ASCTXFCON_TXFITLOFF 8
/* RXFCON register's bits and bitfields */
#define ASCRXFCON_RXFEN 0x0001
#define ASCRXFCON_RXFFLU 0x0002
#define ASCRXFCON_RXTMEN 0x0004
#define ASCRXFCON_RXFITLMASK 0x3F00
#define ASCRXFCON_RXFITLOFF 8
/* FSTAT register's bits and bitfields */
#define ASCFSTAT_RXFFLMASK 0x003F
#define ASCFSTAT_TXFFLMASK 0x3F00
#define ASCFSTAT_TXFFLOFF 8
#define INCAASC_PMU_ENABLE(BIT) *((volatile ulong*)0xBF102000) |= (0x1 << BIT);
typedef struct /* incaAsc_t */
{
volatile unsigned long asc_clc; /*0x0000*/
volatile unsigned long asc_pisel; /*0x0004*/
volatile unsigned long asc_rsvd1[2]; /* for mapping */ /*0x0008*/
volatile unsigned long asc_con; /*0x0010*/
volatile unsigned long asc_bg; /*0x0014*/
volatile unsigned long asc_fdv; /*0x0018*/
volatile unsigned long asc_pmw; /* not used */ /*0x001C*/
volatile unsigned long asc_tbuf; /*0x0020*/
volatile unsigned long asc_rbuf; /*0x0024*/
volatile unsigned long asc_rsvd2[2]; /* for mapping */ /*0x0028*/
volatile unsigned long asc_abcon; /*0x0030*/
volatile unsigned long asc_abstat; /* not used */ /*0x0034*/
volatile unsigned long asc_rsvd3[2]; /* for mapping */ /*0x0038*/
volatile unsigned long asc_rxfcon; /*0x0040*/
volatile unsigned long asc_txfcon; /*0x0044*/
volatile unsigned long asc_fstat; /*0x0048*/
volatile unsigned long asc_rsvd4; /* for mapping */ /*0x004C*/
volatile unsigned long asc_whbcon; /*0x0050*/
volatile unsigned long asc_whbabcon; /*0x0054*/
volatile unsigned long asc_whbabstat; /* not used */ /*0x0058*/
} incaAsc_t;
#endif /* __INCincaAscSioh */

8
arch/mips/cpu/mips32/incaip/config.mk
Unescape View File

@ -1,8 +0,0 @@
#
# (C) Copyright 2011
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
PLATFORM_CPPFLAGS += -mtune=4kc

100
arch/mips/cpu/mips32/incaip/incaip_clock.c
Unescape View File

@ -1,100 +0,0 @@
/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/inca-ip.h>
/*******************************************************************************
*
* get_cpuclk - returns the frequency of the CPU.
*
* Gets the value directly from the INCA-IP hardware.
*
* RETURNS:
* 150.000.000 for 150 MHz
* 133.333.333 for 133 MHz (= 400MHz/3)
* 100.000.000 for 100 MHz (= 400MHz/4)
* NOTE:
* This functions should be used by the hardware driver to get the correct
* frequency of the CPU. Don't use the macros, which are set to init the CPU
* frequency in the ROM code.
*/
uint incaip_get_cpuclk (void)
{
/*-------------------------------------------------------------------------*/
/* CPU Clock Input Multiplexer (MUX I) */
/* Multiplexer MUX I selects the maximum input clock to the CPU. */
/*-------------------------------------------------------------------------*/
if (*((volatile ulong *) INCA_IP_CGU_CGU_MUXCR) &
INCA_IP_CGU_CGU_MUXCR_MUXI) {
/* MUX I set to 150 MHz clock */
return 150000000;
} else {
/* MUX I set to 100/133 MHz clock */
if (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0x40) {
/* Division value is 1/3, maximum CPU operating */
/* frequency is 133.3 MHz */
return 133333333;
} else {
/* Division value is 1/4, maximum CPU operating */
/* frequency is 100 MHz */
return 100000000;
}
}
}
/*******************************************************************************
*
* get_fpiclk - returns the frequency of the FPI bus.
*
* Gets the value directly from the INCA-IP hardware.
*
* RETURNS: Frquency in Hz
*
* NOTE:
* This functions should be used by the hardware driver to get the correct
* frequency of the CPU. Don't use the macros, which are set to init the CPU
* frequency in the ROM code.
* The calculation for the
*/
uint incaip_get_fpiclk (void)
{
uint clkCPU;
clkCPU = incaip_get_cpuclk ();
switch (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0xC) {
case 0x4:
return clkCPU >> 1; /* devided by 2 */
break;
case 0x8:
return clkCPU >> 2; /* devided by 4 */
break;
default:
return clkCPU;
break;
}
}
int incaip_set_cpuclk (void)
{
extern void ebu_init(long);
extern void cgu_init(long);
extern void sdram_init(long);
char tmp[64];
ulong cpuclk;
if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0) {
cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
cgu_init (cpuclk);
ebu_init (cpuclk);
sdram_init (cpuclk);
}
return 0;
}

55
arch/mips/cpu/mips32/incaip/incaip_wdt.S
Unescape View File

@ -1,55 +0,0 @@
/*
* INCA-IP Watchdog timer management code.
*
* Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <asm/regdef.h>
#define WD_BASE 0xb8000000
#define WD_CON0(value) 0x0020(value)
#define WD_CON1(value) 0x0024(value)
#define WD_DISABLE 0x00000008
#define WD_ENABLE 0x00000000
#define WD_WRITE_PW 0xFFFC00F8
#define WD_WRITE_ENDINIT 0xFFFC00F3
#define WD_WRITE_INIT 0xFFFC00F2
.globl disable_incaip_wdt
disable_incaip_wdt:
li t0, WD_BASE
/* Calculate password.
*/
lw t2, WD_CON1(t0)
and t2, 0xC
lw t3, WD_CON0(t0)
and t3, 0xFFFFFF01
or t3, t2
or t3, 0xF0
sw t3, WD_CON0(t0) /* write password */
/* Clear ENDINIT.
*/
li t1, WD_WRITE_INIT
sw t1, WD_CON0(t0)
li t1, WD_DISABLE
sw t1, WD_CON1(t0) /* disable watchdog */
li t1, WD_WRITE_PW
sw t1, WD_CON0(t0) /* write password */
li t1, WD_WRITE_ENDINIT
sw t1, WD_CON0(t0) /* end command */
jr ra
nop

5
arch/mips/cpu/mips32/interrupts.c
Unescape View File

@ -7,6 +7,11 @@
#include <common.h>
int interrupt_init(void)
{
return 0;
}
void enable_interrupts(void)
{
}

5
arch/mips/cpu/mips64/interrupts.c
Unescape View File

@ -7,6 +7,11 @@
#include <common.h>
int interrupt_init(void)
{
return 0;
}
void enable_interrupts(void)
{
}

57
arch/mips/cpu/u-boot.lds
Unescape View File

@ -53,6 +53,7 @@ SECTIONS
. = ALIGN(4);
__image_copy_end = .;
__init_end = .;
.rel.dyn : {
__rel_dyn_start = .;
@ -60,27 +61,7 @@ SECTIONS
__rel_dyn_end = .;
}
.deadcode : {
/*
* Workaround for a binutils feature (or bug?).
*
* The GNU ld from binutils puts the dynamic relocation
* entries into the .rel.dyn section. Sometimes it
* allocates more dynamic relocation entries than it needs
* and the unused slots are set to R_MIPS_NONE entries.
*
* However the size of the .rel.dyn section in the ELF
* section header does not cover the unused entries, so
* objcopy removes those during stripping.
*
* Create a small section here to avoid that.
*/
LONG(0xffffffff);
}
.dynsym : {
*(.dynsym)
}
_end = .;
.bss __rel_dyn_start (OVERLAY) : {
__bss_start = .;
@ -91,15 +72,39 @@ SECTIONS
__bss_end = .;
}
/DISCARD/ : {
.dynsym _end : {
*(.dynsym)
}
.dynbss : {
*(.dynbss)
}
.dynstr : {
*(.dynstr)
}
.dynamic : {
*(.dynamic)
}
.plt : {
*(.plt)
}
.interp : {
*(.interp)
}
.gnu : {
*(.gnu*)
}
.MIPS.stubs : {
*(.MIPS.stubs)
}
.hash : {
*(.hash)
*(.gnu.*)
*(.plt)
*(.got.plt)
*(.rel.plt)
}
}

9
arch/mips/cpu/xburst/Makefile
Unescape View File

@ -1,9 +0,0 @@
#
# Copyright (C) 2011 Xiangfu Liu <xiangfu@openmobilefree.net>
#
# SPDX-License-Identifier: GPL-2.0+
#
extra-y = start.o
obj-y = cpu.o timer.o jz_serial.o
obj-$(CONFIG_JZ4740) += jz4740.o

16
arch/mips/cpu/xburst/config.mk
Unescape View File

@ -1,16 +0,0 @@
#
# Copyright (C) 2011 Xiangfu Liu <xiangfu@openmobilefree.net>
#
# SPDX-License-Identifier: GPL-2.0+
#
PLATFORM_CPPFLAGS += -march=mips32
PLATFORM_CPPFLAGS += -mabi=32 -DCONFIG_32BIT
ifdef CONFIG_SYS_BIG_ENDIAN
PLATFORM_LDFLAGS += -m elf32btsmip
else
PLATFORM_LDFLAGS += -m elf32ltsmip
endif
CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 \
-T $(srctree)/examples/standalone/mips.lds

136
arch/mips/cpu/xburst/cpu.c
Unescape View File

@ -1,136 +0,0 @@
/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
* (C) Copyright 2011
* Xiangfu Liu <xiangfu@openmobilefree.net>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <netdev.h>
#include <asm/mipsregs.h>
#include <asm/cacheops.h>
#include <asm/reboot.h>
#include <asm/io.h>
#include <asm/jz4740.h>
#define cache_op(op, addr) \
__asm__ __volatile__( \
".set push\n" \
".set noreorder\n" \
".set mips3\n" \
"cache %0, %1\n" \
".set pop\n" \
: \
: "i" (op), "R" (*(unsigned char *)(addr)))
void __attribute__((weak)) _machine_restart(void)
{
struct jz4740_wdt *wdt = (struct jz4740_wdt *)JZ4740_WDT_BASE;
struct jz4740_tcu *tcu = (struct jz4740_tcu *)JZ4740_TCU_BASE;
u16 tmp;
/* wdt_select_extalclk() */
tmp = readw(&wdt->tcsr);
tmp &= ~(WDT_TCSR_EXT_EN | WDT_TCSR_RTC_EN | WDT_TCSR_PCK_EN);
tmp |= WDT_TCSR_EXT_EN;
writew(tmp, &wdt->tcsr);
/* wdt_select_clk_div64() */
tmp = readw(&wdt->tcsr);
tmp &= ~WDT_TCSR_PRESCALE_MASK;
tmp |= WDT_TCSR_PRESCALE64,
writew(tmp, &wdt->tcsr);
writew(100, &wdt->tdr); /* wdt_set_data(100) */
writew(0, &wdt->tcnt); /* wdt_set_count(0); */
writel(TCU_TSSR_WDTSC, &tcu->tscr); /* tcu_start_wdt_clock */
writeb(readb(&wdt->tcer) | WDT_TCER_TCEN, &wdt->tcer); /* wdt start */
while (1)
;
}
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
_machine_restart();
fprintf(stderr, "*** reset failed ***\n");
return 0;
}
void flush_cache(ulong start_addr, ulong size)
{
unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
unsigned long addr = start_addr & ~(lsize - 1);
unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
for (; addr <= aend; addr += lsize) {
cache_op(HIT_WRITEBACK_INV_D, addr);
cache_op(HIT_INVALIDATE_I, addr);
}
}
void flush_dcache_range(ulong start_addr, ulong stop)
{
unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
unsigned long addr = start_addr & ~(lsize - 1);
unsigned long aend = (stop - 1) & ~(lsize - 1);
for (; addr <= aend; addr += lsize)
cache_op(HIT_WRITEBACK_INV_D, addr);
}
void invalidate_dcache_range(ulong start_addr, ulong stop)
{
unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
unsigned long addr = start_addr & ~(lsize - 1);
unsigned long aend = (stop - 1) & ~(lsize - 1);
for (; addr <= aend; addr += lsize)
cache_op(HIT_INVALIDATE_D, addr);
}
void flush_icache_all(void)
{
u32 addr, t = 0;
__asm__ __volatile__("mtc0 $0, $28"); /* Clear Taglo */
__asm__ __volatile__("mtc0 $0, $29"); /* Clear TagHi */
for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_ICACHE_SIZE;
addr += CONFIG_SYS_CACHELINE_SIZE) {
cache_op(INDEX_STORE_TAG_I, addr);
}
/* invalidate btb */
__asm__ __volatile__(
".set mips32\n\t"
"mfc0 %0, $16, 7\n\t"
"nop\n\t"
"ori %0,2\n\t"
"mtc0 %0, $16, 7\n\t"
".set mips2\n\t"
:
: "r" (t));
}
void flush_dcache_all(void)
{
u32 addr;
for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_DCACHE_SIZE;
addr += CONFIG_SYS_CACHELINE_SIZE) {
cache_op(INDEX_WRITEBACK_INV_D, addr);
}
__asm__ __volatile__("sync");
}
void flush_cache_all(void)
{
flush_dcache_all();
flush_icache_all();
}

235
arch/mips/cpu/xburst/jz4740.c
Unescape View File

@ -1,235 +0,0 @@
/*
* Jz4740 common routines
* Copyright (c) 2006 Ingenic Semiconductor, <jlwei@ingenic.cn>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <asm/jz4740.h>
void enable_interrupts(void)
{
}
int disable_interrupts(void)
{
return 0;
}
/*
* PLL output clock = EXTAL * NF / (NR * NO)
* NF = FD + 2, NR = RD + 2
* NO = 1 (if OD = 0), NO = 2 (if OD = 1 or 2), NO = 4 (if OD = 3)
*/
void pll_init(void)
{
struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE;
register unsigned int cfcr, plcr1;
int n2FR[33] = {
0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
9
};
int div[5] = {1, 3, 3, 3, 3}; /* divisors of I:S:P:L:M */
int nf, pllout2;
cfcr = CPM_CPCCR_CLKOEN |
CPM_CPCCR_PCS |
(n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
(n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
(n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
(n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) |
(n2FR[div[4]] << CPM_CPCCR_LDIV_BIT);
pllout2 = (cfcr & CPM_CPCCR_PCS) ?
CONFIG_SYS_CPU_SPEED : (CONFIG_SYS_CPU_SPEED / 2);
/* Init USB Host clock, pllout2 must be n*48MHz */
writel(pllout2 / 48000000 - 1, &cpm->uhccdr);
nf = CONFIG_SYS_CPU_SPEED * 2 / CONFIG_SYS_EXTAL;
plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
(0 << CPM_CPPCR_PLLN_BIT) | /* RD=0, NR=2 */
(0 << CPM_CPPCR_PLLOD_BIT) | /* OD=0, NO=1 */
(0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */
CPM_CPPCR_PLLEN; /* enable PLL */
/* init PLL */
writel(cfcr, &cpm->cpccr);
writel(plcr1, &cpm->cppcr);
}
void sdram_init(void)
{
struct jz4740_emc *emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
register unsigned int dmcr0, dmcr, sdmode, tmp, cpu_clk, mem_clk, ns;
unsigned int cas_latency_sdmr[2] = {
EMC_SDMR_CAS_2,
EMC_SDMR_CAS_3,
};
unsigned int cas_latency_dmcr[2] = {
1 << EMC_DMCR_TCL_BIT, /* CAS latency is 2 */
2 << EMC_DMCR_TCL_BIT /* CAS latency is 3 */
};
int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
cpu_clk = CONFIG_SYS_CPU_SPEED;
mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()];
writel(0, &emc->bcr); /* Disable bus release */
writew(0, &emc->rtcsr); /* Disable clock for counting */
/* Fault DMCR value for mode register setting*/
#define SDRAM_ROW0 11
#define SDRAM_COL0 8
#define SDRAM_BANK40 0
dmcr0 = ((SDRAM_ROW0 - 11) << EMC_DMCR_RA_BIT) |
((SDRAM_COL0 - 8) << EMC_DMCR_CA_BIT) |
(SDRAM_BANK40 << EMC_DMCR_BA_BIT) |
(SDRAM_BW16 << EMC_DMCR_BW_BIT) |
EMC_DMCR_EPIN |
cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
/* Basic DMCR value */
dmcr = ((SDRAM_ROW - 11) << EMC_DMCR_RA_BIT) |
((SDRAM_COL - 8) << EMC_DMCR_CA_BIT) |
(SDRAM_BANK4 << EMC_DMCR_BA_BIT) |
(SDRAM_BW16 << EMC_DMCR_BW_BIT) |
EMC_DMCR_EPIN |
cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
/* SDRAM timimg */
ns = 1000000000 / mem_clk;
tmp = SDRAM_TRAS / ns;
if (tmp < 4)
tmp = 4;
if (tmp > 11)
tmp = 11;
dmcr |= (tmp - 4) << EMC_DMCR_TRAS_BIT;
tmp = SDRAM_RCD / ns;
if (tmp > 3)
tmp = 3;
dmcr |= tmp << EMC_DMCR_RCD_BIT;
tmp = SDRAM_TPC / ns;
if (tmp > 7)
tmp = 7;
dmcr |= tmp << EMC_DMCR_TPC_BIT;
tmp = SDRAM_TRWL / ns;
if (tmp > 3)
tmp = 3;
dmcr |= tmp << EMC_DMCR_TRWL_BIT;
tmp = (SDRAM_TRAS + SDRAM_TPC) / ns;
if (tmp > 14)
tmp = 14;
dmcr |= ((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT;
/* SDRAM mode value */
sdmode = EMC_SDMR_BT_SEQ |
EMC_SDMR_OM_NORMAL |
EMC_SDMR_BL_4 |
cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)];
/* Stage 1. Precharge all banks by writing SDMR with DMCR.MRSET=0 */
writel(dmcr, &emc->dmcr);
writeb(0, JZ4740_EMC_SDMR0 | sdmode);
/* Wait for precharge, > 200us */
tmp = (cpu_clk / 1000000) * 1000;
while (tmp--)
;
/* Stage 2. Enable auto-refresh */
writel(dmcr | EMC_DMCR_RFSH, &emc->dmcr);
tmp = SDRAM_TREF / ns;
tmp = tmp / 64 + 1;
if (tmp > 0xff)
tmp = 0xff;
writew(tmp, &emc->rtcor);
writew(0, &emc->rtcnt);
/* Divisor is 64, CKO/64 */
writew(EMC_RTCSR_CKS_64, &emc->rtcsr);
/* Wait for number of auto-refresh cycles */
tmp = (cpu_clk / 1000000) * 1000;
while (tmp--)
;
/* Stage 3. Mode Register Set */
writel(dmcr0 | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr);
writeb(0, JZ4740_EMC_SDMR0 | sdmode);
/* Set back to basic DMCR value */
writel(dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr);
/* everything is ok now */
}
DECLARE_GLOBAL_DATA_PTR;
void calc_clocks(void)
{
unsigned int pllout;
unsigned int div[10] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
pllout = __cpm_get_pllout();
gd->cpu_clk = pllout / div[__cpm_get_cdiv()];
gd->arch.sys_clk = pllout / div[__cpm_get_hdiv()];
gd->arch.per_clk = pllout / div[__cpm_get_pdiv()];
gd->mem_clk = pllout / div[__cpm_get_mdiv()];
gd->arch.dev_clk = CONFIG_SYS_EXTAL;
}
void rtc_init(void)
{
struct jz4740_rtc *rtc = (struct jz4740_rtc *)JZ4740_RTC_BASE;
while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
;
writel(readl(&rtc->rcr) | RTC_RCR_AE, &rtc->rcr); /* enable alarm */
while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
;
writel(0x00007fff, &rtc->rgr); /* type value */
while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
;
writel(0x0000ffe0, &rtc->hwfcr); /* Power on delay 2s */
while (!(readl(&rtc->rcr) & RTC_RCR_WRDY))
;
writel(0x00000fe0, &rtc->hrcr); /* reset delay 125ms */
}
/* U-Boot common routines */
phys_size_t initdram(int board_type)
{
struct jz4740_emc *emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
u32 dmcr;
u32 rows, cols, dw, banks;
ulong size;
dmcr = readl(&emc->dmcr);
rows = 11 + ((dmcr & EMC_DMCR_RA_MASK) >> EMC_DMCR_RA_BIT);
cols = 8 + ((dmcr & EMC_DMCR_CA_MASK) >> EMC_DMCR_CA_BIT);
dw = (dmcr & EMC_DMCR_BW) ? 2 : 4;
banks = (dmcr & EMC_DMCR_BA) ? 4 : 2;
size = (1 << (rows + cols)) * dw * banks;
return size;
}

118
arch/mips/cpu/xburst/jz_serial.c
Unescape View File

@ -1,118 +0,0 @@
/*
* Jz4740 UART support
* Copyright (c) 2011
* Qi Hardware, Xiangfu Liu <xiangfu@sharism.cc>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <asm/jz4740.h>
#include <serial.h>
#include <linux/compiler.h>
/*
* serial_init - initialize a channel
*
* This routine initializes the number of data bits, parity
* and set the selected baud rate. Interrupts are disabled.
* Set the modem control signals if the option is selected.
*
* RETURNS: N/A
*/
struct jz4740_uart *uart = (struct jz4740_uart *)CONFIG_SYS_UART_BASE;
static int jz_serial_init(void)
{
/* Disable port interrupts while changing hardware */
writeb(0, &uart->dlhr_ier);
/* Disable UART unit function */
writeb(~UART_FCR_UUE, &uart->iir_fcr);
/* Set both receiver and transmitter in UART mode (not SIR) */
writeb(~(SIRCR_RSIRE | SIRCR_TSIRE), &uart->isr);
/*
* Set databits, stopbits and parity.
* (8-bit data, 1 stopbit, no parity)
*/
writeb(UART_LCR_WLEN_8 | UART_LCR_STOP_1, &uart->lcr);
/* Set baud rate */
serial_setbrg();
/* Enable UART unit, enable and clear FIFO */
writeb(UART_FCR_UUE | UART_FCR_FE | UART_FCR_TFLS | UART_FCR_RFLS,
&uart->iir_fcr);
return 0;
}
static void jz_serial_setbrg(void)
{
u32 baud_div, tmp;
baud_div = CONFIG_SYS_EXTAL / 16 / CONFIG_BAUDRATE;
tmp = readb(&uart->lcr);
tmp |= UART_LCR_DLAB;
writeb(tmp, &uart->lcr);
writeb((baud_div >> 8) & 0xff, &uart->dlhr_ier);
writeb(baud_div & 0xff, &uart->rbr_thr_dllr);
tmp &= ~UART_LCR_DLAB;
writeb(tmp, &uart->lcr);
}
static int jz_serial_tstc(void)
{
if (readb(&uart->lsr) & UART_LSR_DR)
return 1;
return 0;
}
static void jz_serial_putc(const char c)
{
if (c == '\n')
serial_putc('\r');
/* Wait for fifo to shift out some bytes */
while (!((readb(&uart->lsr) & (UART_LSR_TDRQ | UART_LSR_TEMT)) == 0x60))
;
writeb((u8)c, &uart->rbr_thr_dllr);
}
static int jz_serial_getc(void)
{
while (!serial_tstc())
;
return readb(&uart->rbr_thr_dllr);
}
static struct serial_device jz_serial_drv = {
.name = "jz_serial",
.start = jz_serial_init,
.stop = NULL,
.setbrg = jz_serial_setbrg,
.putc = jz_serial_putc,
.puts = default_serial_puts,
.getc = jz_serial_getc,
.tstc = jz_serial_tstc,
};
void jz_serial_initialize(void)
{
serial_register(&jz_serial_drv);
}
__weak struct serial_device *default_serial_console(void)
{
return &jz_serial_drv;
}

179
arch/mips/cpu/xburst/start.S
Unescape View File

@ -1,179 +0,0 @@
/*
* Startup Code for MIPS32 XBURST CPU-core
*
* Copyright (c) 2010 Xiangfu Liu <xiangfu@sharism.cc>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <version.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/cacheops.h>
.set noreorder
.globl _start
.text
_start:
/* Initialize $gp */
bal 1f
nop
.word _gp
1:
lw gp, 0(ra)
/* Set up temporary stack */
li sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
la t9, board_init_f
jr t9
nop
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
* This "function" does not return, instead it continues in RAM
* after relocating the monitor code.
*
* a0 = addr_sp
* a1 = gd
* a2 = destination address
*/
.globl relocate_code
.ent relocate_code
relocate_code:
move sp, a0 # set new stack pointer
move s0, a1 # save gd in s0
move s2, a2 # save destination address in s2
li t0, CONFIG_SYS_MONITOR_BASE
sub s1, s2, t0 # s1 <-- relocation offset
la t3, in_ram
lw t2, -12(t3) # t2 <-- __image_copy_end
move t1, a2
add gp, s1 # adjust gp
/*
* t0 = source address
* t1 = target address
* t2 = source end address
*/
1:
lw t3, 0(t0)
sw t3, 0(t1)
addu t0, 4
blt t0, t2, 1b
addu t1, 4
/* If caches were enabled, we would have to flush them here. */
/* flush d-cache */
li t0, KSEG0
addi t1, t0, CONFIG_SYS_DCACHE_SIZE
2:
cache INDEX_WRITEBACK_INV_D, 0(t0)
bne t0, t1, 2b
addi t0, CONFIG_SYS_CACHELINE_SIZE
sync
/* flush i-cache */
li t0, KSEG0
addi t1, t0, CONFIG_SYS_ICACHE_SIZE
3:
cache INDEX_INVALIDATE_I, 0(t0)
bne t0, t1, 3b
addi t0, CONFIG_SYS_CACHELINE_SIZE
/* Invalidate BTB */
mfc0 t0, CP0_CONFIG, 7
nop
ori t0, 2
mtc0 t0, CP0_CONFIG, 7
nop
/* Jump to where we've relocated ourselves */
addi t0, s2, in_ram - _start
jr t0
nop
.word __rel_dyn_end
.word __rel_dyn_start
.word __image_copy_end
.word _GLOBAL_OFFSET_TABLE_
.word num_got_entries
in_ram:
/*
* Now we want to update GOT.
*
* GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
* generated by GNU ld. Skip these reserved entries from relocation.
*/
lw t3, -4(t0) # t3 <-- num_got_entries
lw t8, -8(t0) # t8 <-- _GLOBAL_OFFSET_TABLE_
add t8, s1 # t8 now holds relocated _G_O_T_
addi t8, t8, 8 # skipping first two entries
li t2, 2
1:
lw t1, 0(t8)
beqz t1, 2f
add t1, s1
sw t1, 0(t8)
2:
addi t2, 1
blt t2, t3, 1b
addi t8, 4
/* Update dynamic relocations */
lw t1, -16(t0) # t1 <-- __rel_dyn_start
lw t2, -20(t0) # t2 <-- __rel_dyn_end
b 2f # skip first reserved entry
addi t1, 8
1:
lw t8, -4(t1) # t8 <-- relocation info
li t3, 3
bne t8, t3, 2f # skip non R_MIPS_REL32 entries
nop
lw t3, -8(t1) # t3 <-- location to fix up in FLASH
lw t8, 0(t3) # t8 <-- original pointer
add t8, s1 # t8 <-- adjusted pointer
add t3, s1 # t3 <-- location to fix up in RAM
sw t8, 0(t3)
2:
blt t1, t2, 1b
addi t1, 8 # each rel.dyn entry is 8 bytes
/*
* Clear BSS
*
* GOT is now relocated. Thus __bss_start and __bss_end can be
* accessed directly via $gp.
*/
la t1, __bss_start # t1 <-- __bss_start
la t2, __bss_end # t2 <-- __bss_end
1:
sw zero, 0(t1)
blt t1, t2, 1b
addi t1, 4
move a0, s0 # a0 <-- gd
la t9, board_init_r
jr t9
move a1, s2
.end relocate_code

149
arch/mips/cpu/xburst/timer.c
Unescape View File

@ -1,149 +0,0 @@
/*
* Copyright (c) 2006
* Ingenic Semiconductor, <jlwei@ingenic.cn>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <asm/jz4740.h>
#define TIMER_CHAN 0
#define TIMER_FDATA 0xffff /* Timer full data value */
DECLARE_GLOBAL_DATA_PTR;
static struct jz4740_tcu *tcu = (struct jz4740_tcu *)JZ4740_TCU_BASE;
void reset_timer_masked(void)
{
/* reset time */
gd->arch.lastinc = readl(&tcu->tcnt0);
gd->arch.tbl = 0;
}
ulong get_timer_masked(void)
{
ulong now = readl(&tcu->tcnt0);
if (gd->arch.lastinc <= now)
gd->arch.tbl += now - gd->arch.lastinc; /* normal mode */
else {
/* we have an overflow ... */
gd->arch.tbl += TIMER_FDATA + now - gd->arch.lastinc;
}
gd->arch.lastinc = now;
return gd->arch.tbl;
}
void udelay_masked(unsigned long usec)
{
ulong tmo;
ulong endtime;
signed long diff;
/* normalize */
if (usec >= 1000) {
tmo = usec / 1000;
tmo *= CONFIG_SYS_HZ;
tmo /= 1000;
} else {
if (usec > 1) {
tmo = usec * CONFIG_SYS_HZ;
tmo /= 1000*1000;
} else
tmo = 1;
}
endtime = get_timer_masked() + tmo;
do {
ulong now = get_timer_masked();
diff = endtime - now;
} while (diff >= 0);
}
int timer_init(void)
{
writel(TCU_TCSR_PRESCALE256 | TCU_TCSR_EXT_EN, &tcu->tcsr0);
writel(0, &tcu->tcnt0);
writel(0, &tcu->tdhr0);
writel(TIMER_FDATA, &tcu->tdfr0);
/* mask irqs */
writel((1 << TIMER_CHAN) | (1 << (TIMER_CHAN + 16)), &tcu->tmsr);
writel(1 << TIMER_CHAN, &tcu->tscr); /* enable timer clock */
writeb(1 << TIMER_CHAN, &tcu->tesr); /* start counting up */
gd->arch.lastinc = 0;
gd->arch.tbl = 0;
return 0;
}
void reset_timer(void)
{
reset_timer_masked();
}
ulong get_timer(ulong base)
{
return get_timer_masked() - base;
}
void set_timer(ulong t)
{
gd->arch.tbl = t;
}
void __udelay(unsigned long usec)
{
ulong tmo, tmp;
/* normalize */
if (usec >= 1000) {
tmo = usec / 1000;
tmo *= CONFIG_SYS_HZ;
tmo /= 1000;
} else {
if (usec >= 1) {
tmo = usec * CONFIG_SYS_HZ;
tmo /= 1000 * 1000;
} else
tmo = 1;
}
/* check for rollover during this delay */
tmp = get_timer(0);
if ((tmp + tmo) < tmp)
reset_timer_masked(); /* timer would roll over */
else
tmo += tmp;
while (get_timer_masked() < tmo)
;
}
/*
* This function is derived from PowerPC code (read timebase as long long).
* On MIPS it just returns the timer value.
*/
unsigned long long get_ticks(void)
{
return get_timer(0);
}
/*
* This function is derived from PowerPC code (timebase clock frequency).
* On MIPS it returns the number of timer ticks per second.
*/
ulong get_tbclk(void)
{
return CONFIG_SYS_HZ;
}

2430
arch/mips/include/asm/inca-ip.h
View File

File diff suppressed because it is too large Load Diff

2
arch/mips/include/asm/u-boot-mips.h
Unescape View File

@ -21,5 +21,3 @@ static inline unsigned long image_copy_end(void)
extern char __image_copy_end[];
return (unsigned long) &__image_copy_end;
}
extern int incaip_set_cpuclk(void);

9
arch/mips/include/asm/u-boot.h
Unescape View File

@ -15,6 +15,13 @@
#ifndef _U_BOOT_H_
#define _U_BOOT_H_ 1
#ifdef CONFIG_SYS_GENERIC_BOARD
/* Use the generic board which requires a unified bd_info */
#include <asm-generic/u-boot.h>
#else /* !CONFIG_SYS_GENERIC_BOARD */
typedef struct bd_info {
unsigned int bi_baudrate; /* serial console baudrate */
unsigned long bi_arch_number; /* unique id for this board */
@ -26,6 +33,8 @@ typedef struct bd_info {
unsigned long bi_flashoffset; /* reserved area for startup monitor */
} bd_t;
#endif /* !CONFIG_SYS_GENERIC_BOARD */
/* For image.h:image_check_target_arch() */
#define IH_ARCH_DEFAULT IH_ARCH_MIPS

4
arch/mips/lib/Makefile
Unescape View File

@ -5,7 +5,11 @@
# SPDX-License-Identifier: GPL-2.0+
#
ifndef CONFIG_SYS_GENERIC_BOARD
obj-y += board.o
endif
obj-y += io.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
lib-$(CONFIG_USE_PRIVATE_LIBGCC) += ashldi3.o ashrdi3.o lshrdi3.o

9
arch/mips/lib/board.c
Unescape View File

@ -27,12 +27,6 @@ ulong monitor_flash_len;
static char *failed = "*** failed ***\n";
/*
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
*/
const unsigned long mips_io_port_base = -1;
int __board_early_init_f(void)
{
/*
@ -109,9 +103,6 @@ init_fnc_t *init_sequence[] = {
board_early_init_f,
timer_init,
env_init, /* initialize environment */
#ifdef CONFIG_INCA_IP
incaip_set_cpuclk, /* set cpu clock according to env. variable */
#endif
init_baudrate, /* initialize baudrate settings */
serial_init, /* serial communications setup */
console_init_f,

12
arch/mips/lib/io.c
Unescape View File

@ -0,0 +1,12 @@
/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
*/
const unsigned long mips_io_port_base = -1;

9
board/incaip/Makefile
Unescape View File

@ -1,9 +0,0 @@
#
# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y = incaip.o flash.o
obj-y += lowlevel_init.o

57
board/incaip/README
Unescape View File

@ -1,57 +0,0 @@
Flash programming on the INCA-IP board is complicated because of the
EBU swapping unit. A BDI2000 can be used for flash programming only
if the EBU swapping unit is enabled; otherwise it will not detect the
flash memory. But the EBU swapping unit is disadbled after reset, so
if you program some code to flash with the swapping unit on, it will
not be runnable with the swapping unit off.
The consequence is that you have to write a pre-swapped image to
flash using the BDI2000. A simple host-side tool "inca-swap-bytes" is
provided in the "tools/" directory. Use it as follows:
bash$ ./inca-swap-bytes <u-boot.bin >u-boot.bin.swp
Note that the current BDI config file _disables_ the EBU swapping
unit for the flash bank 0. To enable it, (this is required for the
BDI flash commands to work) uncomment the following line in the
config file:
;WM32 0xb8000260 0x404161ff ; Swapping unit enabled
and comment out
WM32 0xb8000260 0x004161ff ; Swapping unit disabled
Alternatively, you can use "mm 0xb8000260 <value>" commands to
enable/disable the swapping unit manually.
Just for reference, here is the complete sequence of actions we took
to install a U-Boot image into flash.
1. ./inca-swap-bytes <u-boot.bin >u-boot.bin.swp
2. From BDI:
mm 0xb8000260 0x404161ff
erase 0xb0000000
erase 0xb0010000
prog 0xb0000000 /tftpboot/INCA/u-boot.bin.swp bin
mm 0xb8000260 0x004161ff
go 0xb0000000
Ethernet autonegotiation needs some time to complete. Instead of
delaying the boot process in all cases, we just start the
autonegotiation process when U-Boot comes up and that is all. Most
likely, it will complete by the time the network transfer is
attempted for the first time. In the worst case, if a transfer is
attempted before the autonegotiation is complete, just a single
packet would be lost resulting in a single timeout error, and then
the transfer would proceed normally. So the time that we would have
lost unconditionally waiting for the autonegotiation to complete, we
have to wait only if the file transfer is started immediately after
reset. We've verified that this works for all the clock
configurations.
(C) 2003 Wolfgang Denk

16
board/incaip/config.mk
Unescape View File

@ -1,16 +0,0 @@
#
# (C) Copyright 2003
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
#
# INCA-IP board with MIPS 4Kc CPU core
#
# ROM version
CONFIG_SYS_TEXT_BASE = 0xB0000000
# RAM version
#CONFIG_SYS_TEXT_BASE = 0x80100000

655
board/incaip/flash.c
Unescape View File

@ -1,655 +0,0 @@
/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/inca-ip.h>
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
* has nothing to do with the flash chip being 8-bit or 16-bit.
*/
#ifdef CONFIG_FLASH_16BIT
typedef unsigned short FLASH_PORT_WIDTH;
typedef volatile unsigned short FLASH_PORT_WIDTHV;
#define FLASH_ID_MASK 0xFFFF
#else
typedef unsigned long FLASH_PORT_WIDTH;
typedef volatile unsigned long FLASH_PORT_WIDTHV;
#define FLASH_ID_MASK 0xFFFFFFFF
#endif
#define FPW FLASH_PORT_WIDTH
#define FPWV FLASH_PORT_WIDTHV
#define ORMASK(size) ((-size) & OR_AM_MSK)
#if 0
#define FLASH_CYCLE1 0x0555
#define FLASH_CYCLE2 0x02aa
#else
#define FLASH_CYCLE1 0x0554
#define FLASH_CYCLE2 0x02ab
#endif
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size(FPWV *addr, flash_info_t *info);
static void flash_reset(flash_info_t *info);
static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
static void flash_get_offsets(ulong base, flash_info_t *info);
static flash_info_t *flash_get_info(ulong base);
/*-----------------------------------------------------------------------
* flash_init()
*
* sets up flash_info and returns size of FLASH (bytes)
*/
unsigned long flash_init (void)
{
unsigned long size = 0;
int i;
/* Init: no FLASHes known */
for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2;
ulong * buscon = (ulong *)
((i == 0) ? INCA_IP_EBU_EBU_BUSCON0 : INCA_IP_EBU_EBU_BUSCON2);
/* Disable write protection */
*buscon &= ~INCA_IP_EBU_EBU_BUSCON1_WRDIS;
#if 1
memset(&flash_info[i], 0, sizeof(flash_info_t));
#endif
flash_info[i].size =
flash_get_size((FPW *)flashbase, &flash_info[i]);
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n",
i, flash_info[i].size);
}
size += flash_info[i].size;
}
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
flash_get_info(CONFIG_SYS_MONITOR_BASE));
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
flash_get_info(CONFIG_ENV_ADDR));
#endif
return size;
}
/*-----------------------------------------------------------------------
*/
static void flash_reset(flash_info_t *info)
{
FPWV *base = (FPWV *)(info->start[0]);
/* Put FLASH back in read mode */
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
*base = (FPW)0x00FF00FF; /* Intel Read Mode */
else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
*base = (FPW)0x00F000F0; /* AMD Read Mode */
}
/*-----------------------------------------------------------------------
*/
static void flash_get_offsets (ulong base, flash_info_t *info)
{
int i;
/* set up sector start address table */
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
&& (info->flash_id & FLASH_BTYPE)) {
int bootsect_size; /* number of bytes/boot sector */
int sect_size; /* number of bytes/regular sector */
bootsect_size = 0x00002000 * (sizeof(FPW)/2);
sect_size = 0x00010000 * (sizeof(FPW)/2);
/* set sector offsets for bottom boot block type */
for (i = 0; i < 8; ++i) {
info->start[i] = base + (i * bootsect_size);
}
for (i = 8; i < info->sector_count; i++) {
info->start[i] = base + ((i - 7) * sect_size);
}
}
else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
&& (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
int sect_size; /* number of bytes/sector */
sect_size = 0x00010000 * (sizeof(FPW)/2);
/* set up sector start address table (uniform sector type) */
for( i = 0; i < info->sector_count; i++ )
info->start[i] = base + (i * sect_size);
}
}
/*-----------------------------------------------------------------------
*/
static flash_info_t *flash_get_info(ulong base)
{
int i;
flash_info_t * info;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
info = & flash_info[i];
if (info->start[0] <= base && base < info->start[0] + info->size)
break;
}
return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t *info)
{
int i;
uchar *boottype;
uchar *bootletter;
char *fmt;
uchar botbootletter[] = "B";
uchar topbootletter[] = "T";
uchar botboottype[] = "bottom boot sector";
uchar topboottype[] = "top boot sector";
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
case FLASH_MAN_SST: printf ("SST "); break;
case FLASH_MAN_STM: printf ("STM "); break;
case FLASH_MAN_INTEL: printf ("INTEL "); break;
default: printf ("Unknown Vendor "); break;
}
/* check for top or bottom boot, if it applies */
if (info->flash_id & FLASH_BTYPE) {
boottype = botboottype;
bootletter = botbootletter;
}
else {
boottype = topboottype;
bootletter = topbootletter;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_AM640U:
fmt = "29LV641D (64 Mbit, uniform sectors)\n";
break;
case FLASH_28F800C3B:
case FLASH_28F800C3T:
fmt = "28F800C3%s (8 Mbit, %s)\n";
break;
case FLASH_INTEL800B:
case FLASH_INTEL800T:
fmt = "28F800B3%s (8 Mbit, %s)\n";
break;
case FLASH_28F160C3B:
case FLASH_28F160C3T:
fmt = "28F160C3%s (16 Mbit, %s)\n";
break;
case FLASH_INTEL160B:
case FLASH_INTEL160T:
fmt = "28F160B3%s (16 Mbit, %s)\n";
break;
case FLASH_28F320C3B:
case FLASH_28F320C3T:
fmt = "28F320C3%s (32 Mbit, %s)\n";
break;
case FLASH_INTEL320B:
case FLASH_INTEL320T:
fmt = "28F320B3%s (32 Mbit, %s)\n";
break;
case FLASH_28F640C3B:
case FLASH_28F640C3T:
fmt = "28F640C3%s (64 Mbit, %s)\n";
break;
case FLASH_INTEL640B:
case FLASH_INTEL640T:
fmt = "28F640B3%s (64 Mbit, %s)\n";
break;
default:
fmt = "Unknown Chip Type\n";
break;
}
printf (fmt, bootletter, boottype);
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20,
info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
if ((i % 5) == 0) {
printf ("\n ");
}
printf (" %08lX%s", info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
}
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
ulong flash_get_size (FPWV *addr, flash_info_t *info)
{
/* Write auto select command: read Manufacturer ID */
/* Write auto select command sequence and test FLASH answer */
addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */
addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */
addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */
/* The manufacturer codes are only 1 byte, so just use 1 byte.
* This works for any bus width and any FLASH device width.
*/
switch (addr[1] & 0xff) {
case (uchar)AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
case (uchar)INTEL_MANUFACT:
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
break;
}
/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
if (info->flash_id != FLASH_UNKNOWN) switch (addr[0]) {
case (FPW)AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
info->flash_id += FLASH_AM640U;
info->sector_count = 128;
info->size = 0x00800000 * (sizeof(FPW)/2);
break; /* => 8 or 16 MB */
case (FPW)INTEL_ID_28F800C3B:
info->flash_id += FLASH_28F800C3B;
info->sector_count = 23;
info->size = 0x00100000 * (sizeof(FPW)/2);
break; /* => 1 or 2 MB */
case (FPW)INTEL_ID_28F800B3B:
info->flash_id += FLASH_INTEL800B;
info->sector_count = 23;
info->size = 0x00100000 * (sizeof(FPW)/2);
break; /* => 1 or 2 MB */
case (FPW)INTEL_ID_28F160C3B:
info->flash_id += FLASH_28F160C3B;
info->sector_count = 39;
info->size = 0x00200000 * (sizeof(FPW)/2);
break; /* => 2 or 4 MB */
case (FPW)INTEL_ID_28F160B3B:
info->flash_id += FLASH_INTEL160B;
info->sector_count = 39;
info->size = 0x00200000 * (sizeof(FPW)/2);
break; /* => 2 or 4 MB */
case (FPW)INTEL_ID_28F320C3B:
info->flash_id += FLASH_28F320C3B;
info->sector_count = 71;
info->size = 0x00400000 * (sizeof(FPW)/2);
break; /* => 4 or 8 MB */
case (FPW)INTEL_ID_28F320B3B:
info->flash_id += FLASH_INTEL320B;
info->sector_count = 71;
info->size = 0x00400000 * (sizeof(FPW)/2);
break; /* => 4 or 8 MB */
case (FPW)INTEL_ID_28F640C3B:
info->flash_id += FLASH_28F640C3B;
info->sector_count = 135;
info->size = 0x00800000 * (sizeof(FPW)/2);
break; /* => 8 or 16 MB */
case (FPW)INTEL_ID_28F640B3B:
info->flash_id += FLASH_INTEL640B;
info->sector_count = 135;
info->size = 0x00800000 * (sizeof(FPW)/2);
break; /* => 8 or 16 MB */
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* => no or unknown flash */
}
flash_get_offsets((ulong)addr, info);
/* Put FLASH back in read mode */
flash_reset(info);
return (info->size);
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
FPWV *addr;
int flag, prot, sect;
int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
ulong start, now, last;
int rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_INTEL800B:
case FLASH_INTEL160B:
case FLASH_INTEL320B:
case FLASH_INTEL640B:
case FLASH_28F800C3B:
case FLASH_28F160C3B:
case FLASH_28F320C3B:
case FLASH_28F640C3B:
case FLASH_AM640U:
break;
case FLASH_UNKNOWN:
default:
printf ("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return 1;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
last = get_timer(0);
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
if (info->protect[sect] != 0) /* protected, skip it */
continue;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr = (FPWV *)(info->start[sect]);
if (intel) {
*addr = (FPW)0x00500050; /* clear status register */
*addr = (FPW)0x00200020; /* erase setup */
*addr = (FPW)0x00D000D0; /* erase confirm */
}
else {
/* must be AMD style if not Intel */
FPWV *base; /* first address in bank */
base = (FPWV *)(info->start[0]);
base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */
base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
*addr = (FPW)0x00300030; /* erase sector */
}
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
start = get_timer(0);
/* wait at least 50us for AMD, 80us for Intel.
* Let's wait 1 ms.
*/
udelay (1000);
while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
if (intel) {
/* suspend erase */
*addr = (FPW)0x00B000B0;
}
flash_reset(info); /* reset to read mode */
rcode = 1; /* failed */
break;
}
/* show that we're waiting */
if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
putc ('.');
last = get_timer(0);
}
}
/* show that we're waiting */
if ((get_timer(last)) > CONFIG_SYS_HZ) { /* every second */
putc ('.');
last = get_timer(0);
}
flash_reset(info); /* reset to read mode */
}
printf (" done\n");
return rcode;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
int bytes; /* number of bytes to program in current word */
int left; /* number of bytes left to program */
int i, res;
for (left = cnt, res = 0;
left > 0 && res == 0;
addr += sizeof(data), left -= sizeof(data) - bytes) {
bytes = addr & (sizeof(data) - 1);
addr &= ~(sizeof(data) - 1);
/* combine source and destination data so can program
* an entire word of 16 or 32 bits
*/
for (i = 0; i < sizeof(data); i++) {
data <<= 8;
if (i < bytes || i - bytes >= left )
data += *((uchar *)addr + i);
else
data += *src++;
}
/* write one word to the flash */
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD:
res = write_word_amd(info, (FPWV *)addr, data);
break;
case FLASH_MAN_INTEL:
res = write_word_intel(info, (FPWV *)addr, data);
break;
default:
/* unknown flash type, error! */
printf ("missing or unknown FLASH type\n");
res = 1; /* not really a timeout, but gives error */
break;
}
}
return (res);
}
/*-----------------------------------------------------------------------
* Write a word to Flash for AMD FLASH
* A word is 16 or 32 bits, whichever the bus width of the flash bank
* (not an individual chip) is.
*
* returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
{
ulong start;
int flag;
int res = 0; /* result, assume success */
FPWV *base; /* first address in flash bank */
/* Check if Flash is (sufficiently) erased */
if ((*dest & data) != data) {
return (2);
}
base = (FPWV *)(info->start[0]);
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */
*dest = data; /* start programming the data */
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
start = get_timer (0);
/* data polling for D7 */
while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*dest = (FPW)0x00F000F0; /* reset bank */
res = 1;
}
}
return (res);
}
/*-----------------------------------------------------------------------
* Write a word to Flash for Intel FLASH
* A word is 16 or 32 bits, whichever the bus width of the flash bank
* (not an individual chip) is.
*
* returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
{
ulong start;
int flag;
int res = 0; /* result, assume success */
/* Check if Flash is (sufficiently) erased */
if ((*dest & data) != data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
*dest = (FPW)0x00500050; /* clear status register */
*dest = (FPW)0x00FF00FF; /* make sure in read mode */
*dest = (FPW)0x00400040; /* program setup */
*dest = data; /* start programming the data */
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
start = get_timer (0);
while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*dest = (FPW)0x00B000B0; /* Suspend program */
res = 1;
}
}
if (res == 0 && (*dest & (FPW)0x00100010))
res = 1; /* write failed, time out error is close enough */
*dest = (FPW)0x00500050; /* clear status register */
*dest = (FPW)0x00FF00FF; /* make sure in read mode */
return (res);
}

110
board/incaip/incaip.c
Unescape View File

@ -1,110 +0,0 @@
/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <netdev.h>
#include <asm/addrspace.h>
#include <asm/inca-ip.h>
#include <asm/io.h>
#include <asm/reboot.h>
extern uint incaip_get_cpuclk(void);
void _machine_restart(void)
{
*INCA_IP_WDT_RST_REQ = 0x3f;
}
static ulong max_sdram_size(void)
{
/* The only supported SDRAM data width is 16bit.
*/
#define CONFIG_SYS_DW 2
/* The only supported number of SDRAM banks is 4.
*/
#define CONFIG_SYS_NB 4
ulong cfgpb0 = *INCA_IP_SDRAM_MC_CFGPB0;
int cols = cfgpb0 & 0xF;
int rows = (cfgpb0 & 0xF0) >> 4;
ulong size = (1 << (rows + cols)) * CONFIG_SYS_DW * CONFIG_SYS_NB;
return size;
}
phys_size_t initdram(int board_type)
{
int rows, cols, best_val = *INCA_IP_SDRAM_MC_CFGPB0;
ulong size, max_size = 0;
ulong our_address;
asm volatile ("move %0, $25" : "=r" (our_address) :);
/* Can't probe for RAM size unless we are running from Flash.
*/
if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
{
return max_sdram_size();
}
for (cols = 0x8; cols <= 0xC; cols++)
{
for (rows = 0xB; rows <= 0xD; rows++)
{
*INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) |
(rows << 4) | cols;
size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
max_sdram_size());
if (size > max_size)
{
best_val = *INCA_IP_SDRAM_MC_CFGPB0;
max_size = size;
}
}
}
*INCA_IP_SDRAM_MC_CFGPB0 = best_val;
return max_size;
}
int checkboard (void)
{
unsigned long chipid = *INCA_IP_WDT_CHIPID;
int part_num;
puts ("Board: INCA-IP ");
part_num = (chipid >> 12) & 0xffff;
switch (part_num) {
case 0xc0:
printf ("Standard Version, ");
break;
case 0xc1:
printf ("Basic Version, ");
break;
default:
printf ("Unknown Part Number 0x%x ", part_num);
break;
}
printf ("Chip V1.%ld, ", (chipid >> 28));
printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000);
set_io_port_base(0);
return 0;
}
#if defined(CONFIG_INCA_IP_SWITCH)
int board_eth_init(bd_t *bis)
{
return inca_switch_initialize(bis);
}
#endif

287
board/incaip/lowlevel_init.S
Unescape View File

@ -1,287 +0,0 @@
/*
* Memory sub-system initialization code for INCA-IP development board.
*
* Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <asm/regdef.h>
#define EBU_MODUL_BASE 0xB8000200
#define EBU_CLC(value) 0x0000(value)
#define EBU_CON(value) 0x0010(value)
#define EBU_ADDSEL0(value) 0x0020(value)
#define EBU_ADDSEL1(value) 0x0024(value)
#define EBU_ADDSEL2(value) 0x0028(value)
#define EBU_BUSCON0(value) 0x0060(value)
#define EBU_BUSCON1(value) 0x0064(value)
#define EBU_BUSCON2(value) 0x0068(value)
#define MC_MODUL_BASE 0xBF800000
#define MC_ERRCAUSE(value) 0x0100(value)
#define MC_ERRADDR(value) 0x0108(value)
#define MC_IOGP(value) 0x0800(value)
#define MC_SELFRFSH(value) 0x0A00(value)
#define MC_CTRLENA(value) 0x1000(value)
#define MC_MRSCODE(value) 0x1008(value)
#define MC_CFGDW(value) 0x1010(value)
#define MC_CFGPB0(value) 0x1018(value)
#define MC_LATENCY(value) 0x1038(value)
#define MC_TREFRESH(value) 0x1040(value)
#define CGU_MODUL_BASE 0xBF107000
#define CGU_PLL1CR(value) 0x0008(value)
#define CGU_DIVCR(value) 0x0010(value)
#define CGU_MUXCR(value) 0x0014(value)
#define CGU_PLL1SR(value) 0x000C(value)
.set noreorder
/*
* void ebu_init(long)
*
* a0 has the clock value we are going to run at
*/
.globl ebu_init
.ent ebu_init
ebu_init:
__ebu_init:
li t1, EBU_MODUL_BASE
li t2, 0xA0000041
sw t2, EBU_ADDSEL0(t1)
li t2, 0xA0800041
sw t2, EBU_ADDSEL2(t1)
li t2, 0xBE0000F1
sw t2, EBU_ADDSEL1(t1)
li t3, 100000000
beq a0, t3, 1f
nop
li t3, 133000000
beq a0, t3, 2f
nop
li t3, 150000000
beq a0, t3, 2f
nop
b 3f
nop
/* 100 MHz */
1:
li t2, 0x8841417D
sw t2, EBU_BUSCON0(t1)
sw t2, EBU_BUSCON2(t1)
li t2, 0x684142BD
b 3f
sw t2, EBU_BUSCON1(t1) /* delay slot */
/* 133 or 150 MHz */
2:
li t2, 0x8841417E
sw t2, EBU_BUSCON0(t1)
sw t2, EBU_BUSCON2(t1)
li t2, 0x684143FD
sw t2, EBU_BUSCON1(t1)
3:
jr ra
nop
.end ebu_init
/*
* void cgu_init(long)
*
* a0 has the clock value
*/
.globl cgu_init
.ent cgu_init
cgu_init:
__cgu_init:
li t1, CGU_MODUL_BASE
li t3, 100000000
beq a0, t3, 1f
nop
li t3, 133000000
beq a0, t3, 2f
nop
li t3, 150000000
beq a0, t3, 3f
nop
b 5f
nop
/* 100 MHz clock */
1:
li t2, 0x80000014
sw t2, CGU_DIVCR(t1)
li t2, 0x80000000
sw t2, CGU_MUXCR(t1)
li t2, 0x800B0001
b 5f
sw t2, CGU_PLL1CR(t1) /* delay slot */
/* 133 MHz clock */
2:
li t2, 0x80000054
sw t2, CGU_DIVCR(t1)
li t2, 0x80000000
sw t2, CGU_MUXCR(t1)
li t2, 0x800B0001
b 5f
sw t2, CGU_PLL1CR(t1) /* delay slot */
/* 150 MHz clock */
3:
li t2, 0x80000017
sw t2, CGU_DIVCR(t1)
li t2, 0xC00B0001
sw t2, CGU_PLL1CR(t1)
li t3, 0x80000000
4:
lw t2, CGU_PLL1SR(t1)
and t2, t2, t3
beq t2, zero, 4b
nop
li t2, 0x80000001
sw t2, CGU_MUXCR(t1)
5:
jr ra
nop
.end cgu_init
/*
* void sdram_init(long)
*
* a0 has the clock value
*/
.globl sdram_init
.ent sdram_init
sdram_init:
__sdram_init:
li t1, MC_MODUL_BASE
#if 0
/* Disable memory controller before changing any of its registers */
sw zero, MC_CTRLENA(t1)
#endif
li t2, 100000000
beq a0, t2, 1f
nop
li t2, 133000000
beq a0, t2, 2f
nop
li t2, 150000000
beq a0, t2, 3f
nop
b 5f
nop
/* 100 MHz clock */
1:
/* Set clock ratio (clkrat=1:1, rddel=3) */
li t2, 0x00000003
sw t2, MC_IOGP(t1)
/* Set sdram refresh rate (4K/64ms @ 100MHz) */
li t2, 0x0000061A
b 4f
sw t2, MC_TREFRESH(t1)
/* 133 MHz clock */
2:
/* Set clock ratio (clkrat=1:1, rddel=3) */
li t2, 0x00000003
sw t2, MC_IOGP(t1)
/* Set sdram refresh rate (4K/64ms @ 133MHz) */
li t2, 0x00000822
b 4f
sw t2, MC_TREFRESH(t1)
/* 150 MHz clock */
3:
/* Set clock ratio (clkrat=3:2, rddel=4) */
li t2, 0x00000014
sw t2, MC_IOGP(t1)
/* Set sdram refresh rate (4K/64ms @ 150MHz) */
li t2, 0x00000927
sw t2, MC_TREFRESH(t1)
4:
/* Clear Error log registers */
sw zero, MC_ERRCAUSE(t1)
sw zero, MC_ERRADDR(t1)
/* Clear Power-down registers */
sw zero, MC_SELFRFSH(t1)
/* Set CAS Latency */
li t2, 0x00000020 /* CL = 2 */
sw t2, MC_MRSCODE(t1)
/* Set word width to 16 bit */
li t2, 0x2
sw t2, MC_CFGDW(t1)
/* Set CS0 to SDRAM parameters */
li t2, 0x000014C9
sw t2, MC_CFGPB0(t1)
/* Set SDRAM latency parameters */
li t2, 0x00026325 /* BC PC100 */
sw t2, MC_LATENCY(t1)
5:
/* Finally enable the controller */
li t2, 0x00000001
sw t2, MC_CTRLENA(t1)
jr ra
nop
.end sdram_init
.globl lowlevel_init
.ent lowlevel_init
lowlevel_init:
/* Disable Watchdog.
*/
la t9, disable_incaip_wdt
jalr t9
nop
/* EBU, CGU and SDRAM Initialization.
*/
li a0, CONFIG_CPU_CLOCK_RATE
move t0, ra
/* We rely on the fact that neither ebu_init() nor cgu_init() nor sdram_init()
* modify t0 and a0.
*/
bal __cgu_init
nop
bal __ebu_init
nop
bal __sdram_init
nop
move ra, t0
jr ra
nop
.end lowlevel_init

4
boards.cfg
Unescape View File

@ -519,10 +519,6 @@ Active mips mips32 au1x00 - dbau1x00
Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas@corelatus.se>
Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas@corelatus.se>
Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 -
Active mips mips32 incaip - incaip incaip - Wolfgang Denk <wd@denx.de>
Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd@denx.de>
Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd@denx.de>
Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd@denx.de>
Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot@andestech.com>

6
common/board_f.c
Unescape View File

@ -173,7 +173,7 @@ static int announce_dram_init(void)
return 0;
}
#ifdef CONFIG_PPC
#if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
static int init_func_ram(void)
{
#ifdef CONFIG_BOARD_TYPES
@ -819,7 +819,7 @@ static init_fnc_t init_sequence_f[] = {
/* TODO: can we rename this to timer_init()? */
init_timebase,
#endif
#ifdef CONFIG_ARM
#if defined(CONFIG_ARM) || defined(CONFIG_MIPS)
timer_init, /* initialize timer */
#endif
#ifdef CONFIG_SYS_ALLOC_DPRAM
@ -889,7 +889,7 @@ static init_fnc_t init_sequence_f[] = {
#ifdef CONFIG_ARM
dram_init, /* configure available RAM banks */
#endif
#ifdef CONFIG_PPC
#if defined(CONFIG_MIPS) || defined(CONFIG_PPC)
init_func_ram,
#endif
#ifdef CONFIG_POST

1
doc/README.scrapyard
Unescape View File

@ -125,3 +125,4 @@ MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwar
adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
incaip mips mips32 - 2014-04-17 Wolfgang Denk <wd@denx.de>

1
drivers/net/Makefile
Unescape View File

@ -29,7 +29,6 @@ obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC110) += ftmac110.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
obj-$(CONFIG_GRETH) += greth.o
obj-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
obj-$(CONFIG_LAN91C96) += lan91c96.o

793
drivers/net/inca-ip_sw.c
Unescape View File

@ -1,793 +0,0 @@
/*
* INCA-IP internal switch ethernet driver.
*
* (C) Copyright 2003-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <malloc.h>
#include <net.h>
#include <netdev.h>
#include <asm/inca-ip.h>
#include <asm/addrspace.h>
#define NUM_RX_DESC PKTBUFSRX
#define NUM_TX_DESC 3
#define TOUT_LOOP 1000000
#define DELAY udelay(10000)
/* Sometimes the store word instruction hangs while writing to one
* of the Switch registers. Moving the instruction into a separate
* function somehow makes the problem go away.
*/
static void SWORD(volatile u32 * reg, u32 value)
{
*reg = value;
}
#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value;
#define DMA_READ_REG(reg, value) value = (u32)*((volatile u32*)reg)
#define SW_WRITE_REG(reg, value) \
SWORD(reg, value);\
DELAY;\
SWORD(reg, value);
#define SW_READ_REG(reg, value) \
value = (u32)*((volatile u32*)reg);\
DELAY;\
value = (u32)*((volatile u32*)reg);
#define INCA_DMA_TX_POLLING_TIME 0x07
#define INCA_DMA_RX_POLLING_TIME 0x07
#define INCA_DMA_TX_HOLD 0x80000000
#define INCA_DMA_TX_EOP 0x40000000
#define INCA_DMA_TX_SOP 0x20000000
#define INCA_DMA_TX_ICPT 0x10000000
#define INCA_DMA_TX_IEOP 0x08000000
#define INCA_DMA_RX_C 0x80000000
#define INCA_DMA_RX_SOP 0x40000000
#define INCA_DMA_RX_EOP 0x20000000
#define INCA_SWITCH_PHY_SPEED_10H 0x1
#define INCA_SWITCH_PHY_SPEED_10F 0x5
#define INCA_SWITCH_PHY_SPEED_100H 0x2
#define INCA_SWITCH_PHY_SPEED_100F 0x6
/************************ Auto MDIX settings ************************/
#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR INCA_IP_Ports_P1_DIR
#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL
#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT INCA_IP_Ports_P1_OUT
#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX 16
#define WAIT_SIGNAL_RETRIES 100
#define WAIT_LINK_RETRIES 100
#define LINK_RETRY_DELAY 2000 /* ms */
/********************************************************************/
typedef struct
{
union {
struct {
volatile u32 HOLD :1;
volatile u32 ICpt :1;
volatile u32 IEop :1;
volatile u32 offset :3;
volatile u32 reserved0 :4;
volatile u32 NFB :22;
}field;
volatile u32 word;
}params;
volatile u32 nextRxDescPtr;
volatile u32 RxDataPtr;
union {
struct {
volatile u32 C :1;
volatile u32 Sop :1;
volatile u32 Eop :1;
volatile u32 reserved3 :12;
volatile u32 NBT :17;
}field;
volatile u32 word;
}status;
} inca_rx_descriptor_t;
typedef struct
{
union {
struct {
volatile u32 HOLD :1;
volatile u32 Eop :1;
volatile u32 Sop :1;
volatile u32 ICpt :1;
volatile u32 IEop :1;
volatile u32 reserved0 :5;
volatile u32 NBA :22;
}field;
volatile u32 word;
}params;
volatile u32 nextTxDescPtr;
volatile u32 TxDataPtr;
volatile u32 C :1;
volatile u32 reserved3 :31;
} inca_tx_descriptor_t;
static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16)));
static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));
static int tx_new, rx_new, tx_hold, rx_hold;
static int tx_old_hold = -1;
static int initialized = 0;
static int inca_switch_init(struct eth_device *dev, bd_t * bis);
static int inca_switch_send(struct eth_device *dev, void *packet, int length);
static int inca_switch_recv(struct eth_device *dev);
static void inca_switch_halt(struct eth_device *dev);
static void inca_init_switch_chip(void);
static void inca_dma_init(void);
static int inca_amdix(void);
int inca_switch_initialize(bd_t * bis)
{
struct eth_device *dev;
#if 0
printf("Entered inca_switch_initialize()\n");
#endif
if (!(dev = (struct eth_device *) malloc (sizeof *dev))) {
printf("Failed to allocate memory\n");
return 0;
}
memset(dev, 0, sizeof(*dev));
inca_dma_init();
inca_init_switch_chip();
#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
inca_amdix();
#endif
sprintf(dev->name, "INCA-IP Switch");
dev->init = inca_switch_init;
dev->halt = inca_switch_halt;
dev->send = inca_switch_send;
dev->recv = inca_switch_recv;
eth_register(dev);
#if 0
printf("Leaving inca_switch_initialize()\n");
#endif
return 0;
}
static int inca_switch_init(struct eth_device *dev, bd_t * bis)
{
int i;
u32 v, regValue;
u16 wTmp;
#if 0
printf("Entering inca_switch_init()\n");
#endif
/* Set MAC address.
*/
wTmp = (u16)dev->enetaddr[0];
regValue = (wTmp << 8) | dev->enetaddr[1];
SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue);
wTmp = (u16)dev->enetaddr[2];
regValue = (wTmp << 8) | dev->enetaddr[3];
regValue = regValue << 16;
wTmp = (u16)dev->enetaddr[4];
regValue |= (wTmp<<8) | dev->enetaddr[5];
SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);
/* Initialize the descriptor rings.
*/
for (i = 0; i < NUM_RX_DESC; i++) {
inca_rx_descriptor_t * rx_desc = (inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[i]);
memset(rx_desc, 0, sizeof(rx_ring[i]));
/* Set maximum size of receive buffer.
*/
rx_desc->params.field.NFB = PKTSIZE_ALIGN;
/* Set the offset of the receive buffer. Zero means
* that the offset mechanism is not used.
*/
rx_desc->params.field.offset = 0;
/* Check if it is the last descriptor.
*/
if (i == (NUM_RX_DESC - 1)) {
/* Let the last descriptor point to the first
* one.
*/
rx_desc->nextRxDescPtr = (u32)CKSEG1ADDR(rx_ring);
} else {
/* Set the address of the next descriptor.
*/
rx_desc->nextRxDescPtr = (u32)CKSEG1ADDR(&rx_ring[i+1]);
}
rx_desc->RxDataPtr = (u32)CKSEG1ADDR(NetRxPackets[i]);
}
#if 0
printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]);
printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
#endif
for (i = 0; i < NUM_TX_DESC; i++) {
inca_tx_descriptor_t * tx_desc = (inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[i]);
memset(tx_desc, 0, sizeof(tx_ring[i]));
tx_desc->params.word = 0;
tx_desc->params.field.HOLD = 1;
tx_desc->C = 1;
/* Check if it is the last descriptor.
*/
if (i == (NUM_TX_DESC - 1)) {
/* Let the last descriptor point to the
* first one.
*/
tx_desc->nextTxDescPtr = (u32)CKSEG1ADDR(tx_ring);
} else {
/* Set the address of the next descriptor.
*/
tx_desc->nextTxDescPtr = (u32)CKSEG1ADDR(&tx_ring[i+1]);
}
}
/* Initialize RxDMA.
*/
DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
debug("RX status = 0x%08X\n", v);
/* Writing to the FRDA of CHANNEL.
*/
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);
/* Writing to the COMMAND REG.
*/
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT);
/* Initialize TxDMA.
*/
DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
debug("TX status = 0x%08X\n", v);
/* Writing to the FRDA of CHANNEL.
*/
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);
tx_new = rx_new = 0;
tx_hold = NUM_TX_DESC - 1;
rx_hold = NUM_RX_DESC - 1;
#if 0
rx_ring[rx_hold].params.field.HOLD = 1;
#endif
/* enable spanning tree forwarding, enable the CPU port */
/* ST_PT:
* CPS (CPU port status) 0x3 (forwarding)
* LPS (LAN port status) 0x3 (forwarding)
* PPS (PC port status) 0x3 (forwarding)
*/
SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);
#if 0
printf("Leaving inca_switch_init()\n");
#endif
return 0;
}
static int inca_switch_send(struct eth_device *dev, void *packet, int length)
{
int i;
int res = -1;
u32 command;
u32 regValue;
inca_tx_descriptor_t * tx_desc = (inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_new]);
#if 0
printf("Entered inca_switch_send()\n");
#endif
if (length <= 0) {
printf ("%s: bad packet size: %d\n", dev->name, length);
goto Done;
}
for(i = 0; tx_desc->C == 0; i++) {
if (i >= TOUT_LOOP) {
printf("%s: tx error buffer not ready\n", dev->name);
goto Done;
}
}
if (tx_old_hold >= 0) {
((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_old_hold]))->params.field.HOLD = 1;
}
tx_old_hold = tx_hold;
tx_desc->params.word =
(INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD);
tx_desc->C = 0;
tx_desc->TxDataPtr = (u32)packet;
tx_desc->params.field.NBA = length;
((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_hold]))->params.field.HOLD = 0;
tx_hold = tx_new;
tx_new = (tx_new + 1) % NUM_TX_DESC;
if (! initialized) {
command = INCA_IP_DMA_DMA_TXCCR0_INIT;
initialized = 1;
} else {
command = INCA_IP_DMA_DMA_TXCCR0_HR;
}
DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
regValue |= command;
#if 0
printf("regValue = 0x%x\n", regValue);
#endif
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
#if 1
for(i = 0; ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_hold]))->C == 0; i++) {
if (i >= TOUT_LOOP) {
printf("%s: tx buffer not ready\n", dev->name);
goto Done;
}
}
#endif
res = length;
Done:
#if 0
printf("Leaving inca_switch_send()\n");
#endif
return res;
}
static int inca_switch_recv(struct eth_device *dev)
{
int length = 0;
inca_rx_descriptor_t * rx_desc;
#if 0
printf("Entered inca_switch_recv()\n");
#endif
for (;;) {
rx_desc = (inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[rx_new]);
if (rx_desc->status.field.C == 0) {
break;
}
#if 0
rx_ring[rx_new].params.field.HOLD = 1;
#endif
if (! rx_desc->status.field.Eop) {
printf("Partly received packet!!!\n");
break;
}
length = rx_desc->status.field.NBT;
rx_desc->status.word &=
~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C);
#if 0
{
int i;
for (i=0;i<length - 4;i++) {
if (i % 16 == 0) printf("\n%04x: ", i);
printf("%02X ", NetRxPackets[rx_new][i]);
}
printf("\n");
}
#endif
if (length) {
#if 0
printf("Received %d bytes\n", length);
#endif
NetReceive((void*)CKSEG1ADDR(NetRxPackets[rx_new]), length - 4);
} else {
#if 1
printf("Zero length!!!\n");
#endif
}
((inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[rx_hold]))->params.field.HOLD = 0;
rx_hold = rx_new;
rx_new = (rx_new + 1) % NUM_RX_DESC;
}
#if 0
printf("Leaving inca_switch_recv()\n");
#endif
return length;
}
static void inca_switch_halt(struct eth_device *dev)
{
#if 0
printf("Entered inca_switch_halt()\n");
#endif
#if 1
initialized = 0;
#endif
#if 1
/* Disable forwarding to the CPU port.
*/
SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
/* Close RxDMA channel.
*/
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
/* Close TxDMA channel.
*/
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);
#endif
#if 0
printf("Leaving inca_switch_halt()\n");
#endif
}
static void inca_init_switch_chip(void)
{
u32 regValue;
/* To workaround a problem with collision counter
* (see Errata sheet).
*/
SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);
#if 1
/* init MDIO configuration:
* MDS (Poll speed): 0x01 (4ms)
* PHY_LAN_ADDR: 0x06
* PHY_PC_ADDR: 0x05
* UEP (Use External PHY): 0x00 (Internal PHY is used)
* PS (Port Select): 0x00 (PT/UMM for LAN)
* PT (PHY Test): 0x00 (no test mode)
* UMM (Use MDIO Mode): 0x00 (state machine is disabled)
*/
SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);
/* init PHY:
* SL (Auto Neg. Speed for LAN)
* SP (Auto Neg. Speed for PC)
* LL (Link Status for LAN)
* LP (Link Status for PC)
* DL (Duplex Status for LAN)
* DP (Duplex Status for PC)
* PL (Auto Neg. Pause Status for LAN)
* PP (Auto Neg. Pause Status for PC)
*/
SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);
/* MDIO_ACC:
* RA (Request/Ack) 0x01 (Request)
* RW (Read/Write) 0x01 (Write)
* PHY_ADDR 0x05 (PC)
* REG_ADDR 0x00 (PHY_BCR: basic control register)
* PHY_DATA 0x8000
* Reset - software reset
* LB (loop back) - normal
* SS (speed select) - 10 Mbit/s
* ANE (auto neg. enable) - enable
* PD (power down) - normal
* ISO (isolate) - normal
* RAN (restart auto neg.) - normal
* DM (duplex mode) - half duplex
* CT (collision test) - enable
*/
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000);
/* MDIO_ACC:
* RA (Request/Ack) 0x01 (Request)
* RW (Read/Write) 0x01 (Write)
* PHY_ADDR 0x06 (LAN)
* REG_ADDR 0x00 (PHY_BCR: basic control register)
* PHY_DATA 0x8000
* Reset - software reset
* LB (loop back) - normal
* SS (speed select) - 10 Mbit/s
* ANE (auto neg. enable) - enable
* PD (power down) - normal
* ISO (isolate) - normal
* RAN (restart auto neg.) - normal
* DM (duplex mode) - half duplex
* CT (collision test) - enable
*/
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);
#endif
/* Make sure the CPU port is disabled for now. We
* don't want packets to get stacked for us until
* we enable DMA and are prepared to receive them.
*/
SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);
/* CRC GEN is enabled.
*/
regValue |= 0x00000200;
SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);
/* ADD TAG is disabled.
*/
SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
regValue &= ~0x00000002;
SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
}
static void inca_dma_init(void)
{
/* Switch off all DMA channels.
*/
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);
/* Setup TX channel polling time.
*/
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);
/* Setup RX channel polling time.
*/
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);
/* ERRATA: write reset value into the DMA RX IMR register.
*/
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);
/* Just in case: disable all transmit interrupts also.
*/
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
}
#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
static int inca_amdix(void)
{
u32 phyReg1 = 0;
u32 phyReg4 = 0;
u32 phyReg5 = 0;
u32 phyReg6 = 0;
u32 phyReg31 = 0;
u32 regEphy = 0;
int mdi_flag;
int retries;
/* Setup GPIO pins.
*/
*INCA_IP_AUTO_MDIX_LAN_PORTS_DIR |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
*INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
#if 0
/* Wait for signal.
*/
retries = WAIT_SIGNAL_RETRIES;
while (--retries) {
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
(17 << 16)); /* PHY_MCSR */
do {
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
} while (phyReg1 & (1 << 31));
if (phyReg1 & (1 << 1)) {
/* Signal detected */
break;
}
}
if (!retries)
goto Fail;
#endif
/* Set MDI mode.
*/
*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
mdi_flag = 1;
/* Wait for link.
*/
retries = WAIT_LINK_RETRIES;
while (--retries) {
udelay(LINK_RETRY_DELAY * 1000);
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
(1 << 16)); /* PHY_BSR */
do {
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
} while (phyReg1 & (1 << 31));
if (phyReg1 & (1 << 2)) {
/* Link is up */
break;
} else if (mdi_flag) {
/* Set MDIX mode */
*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
mdi_flag = 0;
} else {
/* Set MDI mode */
*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
mdi_flag = 1;
}
}
if (!retries) {
goto Fail;
} else {
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
(1 << 16)); /* PHY_BSR */
do {
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
} while (phyReg1 & (1 << 31));
/* Auto-negotiation / Parallel detection complete
*/
if (phyReg1 & (1 << 5)) {
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
(31 << 16)); /* PHY_SCSR */
do {
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
} while (phyReg31 & (1 << 31));
switch ((phyReg31 >> 2) & 0x7) {
case INCA_SWITCH_PHY_SPEED_10H:
/* 10Base-T Half-duplex */
regEphy = 0;
break;
case INCA_SWITCH_PHY_SPEED_10F:
/* 10Base-T Full-duplex */
regEphy = INCA_IP_Switch_EPHY_DL;
break;
case INCA_SWITCH_PHY_SPEED_100H:
/* 100Base-TX Half-duplex */
regEphy = INCA_IP_Switch_EPHY_SL;
break;
case INCA_SWITCH_PHY_SPEED_100F:
/* 100Base-TX Full-duplex */
regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL;
break;
}
/* In case of Auto-negotiation,
* update the negotiated PAUSE support status
*/
if (phyReg1 & (1 << 3)) {
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
(6 << 16)); /* MII_EXPANSION */
do {
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
} while (phyReg6 & (1 << 31));
/* We are Autoneg-able.
* Is Link partner also able to autoneg?
*/
if (phyReg6 & (1 << 0)) {
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
(4 << 16)); /* MII_ADVERTISE */
do {
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
} while (phyReg4 & (1 << 31));
/* We advertise PAUSE capab.
* Does link partner also advertise it?
*/
if (phyReg4 & (1 << 10)) {
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
(5 << 16)); /* MII_LPA */
do {
SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
} while (phyReg5 & (1 << 31));
/* Link partner is PAUSE capab.
*/
if (phyReg5 & (1 << 10)) {
regEphy |= INCA_IP_Switch_EPHY_PL;
}
}
}
}
/* Link is up */
regEphy |= INCA_IP_Switch_EPHY_LL;
SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy);
}
}
return 0;
Fail:
printf("No Link on LAN port\n");
return -1;
}
#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */

3
include/common.h
Unescape View File

@ -681,9 +681,6 @@ ulong get_UCLK (void);
#if defined(CONFIG_LH7A40X)
ulong get_PLLCLK (void);
#endif
#if defined CONFIG_INCA_IP
uint incaip_get_cpuclk (void);
#endif
#if defined(CONFIG_IMX)
ulong get_systemPLLCLK(void);
ulong get_FCLK(void);

177
include/configs/incaip.h
Unescape View File

@ -1,177 +0,0 @@
/*
* (C) Copyright 2003-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* This file contains the configuration parameters for the INCA-IP board.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#define CONFIG_INCA_IP 1 /* on a INCA-IP Board */
#define CONFIG_XWAY_SWAP_BYTES
/*
* Clock for the MIPS core (MHz)
* allowed values: 100000000, 133000000, and 150000000 (default)
*/
#ifndef CONFIG_CPU_CLOCK_RATE
#define CONFIG_CPU_CLOCK_RATE 150000000
#endif
#define CONFIG_SYS_XWAY_EBU_BOOTCFG 0x40C4 /* CMULT = 8 */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BAUDRATE 115200
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#define CONFIG_PREBOOT "echo;" \
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off\0" \
"addmisc=setenv bootargs ${bootargs} " \
"console=ttyS0,${baudrate} " \
"ethaddr=${ethaddr} " \
"panic=1\0" \
"flash_nfs=run nfsargs addip addmisc;" \
"bootm ${kernel_addr}\0" \
"flash_self=run ramargs addip addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 80500000 ${bootfile};" \
"run nfsargs addip addmisc;bootm\0" \
"rootpath=/opt/eldk/mips_4KC\0" \
"bootfile=/tftpboot/INCA/uImage\0" \
"kernel_addr=B0040000\0" \
"ramdisk_addr=B0100000\0" \
"u-boot=/tftpboot/INCA/u-boot.bin\0" \
"load=tftp 80500000 ${u-boot}\0" \
"update=protect off 1:0-2;era 1:0-2;" \
"cp.b 80500000 B0000000 ${filesize}\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_SNTP
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "INCA-IP # " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
#define CONFIG_SYS_MALLOC_LEN 128*1024
#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
#define CONFIG_SYS_MIPS_TIMER_FREQ (incaip_get_cpuclk() / 2)
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_LOAD_ADDR 0x80100000 /* default load address */
#define CONFIG_SYS_MEMTEST_START 0x80100000
#define CONFIG_SYS_MEMTEST_END 0x80800000
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
#define PHYS_FLASH_1 0xb0000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0xb0800000 /* Flash Bank #2 */
/* The following #defines are needed to get flash environment right */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
#define CONFIG_ENV_IS_IN_FLASH 1
/* Address and size of Primary Environment Sector */
#define CONFIG_ENV_ADDR 0xB0030000
#define CONFIG_ENV_SIZE 0x10000
#define CONFIG_FLASH_16BIT
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_INCA_IP_SWITCH
#define CONFIG_INCA_IP_SWITCH_AMDIX
/*
* JFFS2 partitions
*/
/* No command line, one static partition, use all space on the device */
#undef CONFIG_CMD_MTDPARTS
#define CONFIG_JFFS2_DEV "nor1"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
/* mtdparts command line support */
/*
#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT "nor0=INCA-IP Bank 0"
#define MTDPARTS_DEFAULT "mtdparts=INCA-IP Bank 0:192k(uboot)," \
"64k(env)," \
"768k(linux)," \
"1m@3m(rootfs)," \
"768k(linux2)," \
"3m@5m(rootfs2)"
*/
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CONFIG_SYS_DCACHE_SIZE 4096
#define CONFIG_SYS_ICACHE_SIZE 4096
#define CONFIG_SYS_CACHELINE_SIZE 16
#endif /* __CONFIG_H */

3
include/configs/malta.h
Unescape View File

@ -14,6 +14,9 @@
* System configuration
*/
#define CONFIG_MALTA
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MEMSIZE_IN_BYTES

1
include/netdev.h
Unescape View File

@ -54,7 +54,6 @@ int ftmac100_initialize(bd_t *bits);
int ftmac110_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
int inca_switch_initialize(bd_t *bis);
int ks8695_eth_initialize(void);
int ks8851_mll_initialize(u8 dev_num, int base_addr);
int lan91c96_initialize(u8 dev_num, int base_addr);

Write Preview
Loading…
Cancel
Save