Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

nand_spl: change out_be32 to raw_writel and depend on subsequent sync

Browse Source 
This change reduces the SPL size by removing the redundant syncs produced
by out_be32 and just replies on one final sync

Done with:

sed -r '/in_be32/b; s/(out_be32)\(([^,]*),\s+(.*)\)/__raw_writel(\3, \2)/g' -i `git grep --name-only sdram_init nand_spl/`

Signed-off-by: Matthew McClintock <msm@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
master
Matthew McClintock 13 years ago committed by Andy Fleming
parent 02ea538ce9
commit ae6beb24d7
3 changed files with 71 additions and 73 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 54
      nand_spl/board/freescale/p1010rdb/nand_boot.c
  2. 42
      nand_spl/board/freescale/p1023rds/nand_boot.c
  3. 48
      nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c

54
nand_spl/board/freescale/p1010rdb/nand_boot.c
Unescape View File

@ -39,39 +39,37 @@ void sdram_init(void)
/* mask off E bit */
u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR));
out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL | SDRAM_CFG_32_BE);
out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL_2);
out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
__raw_writel(CONFIG_SYS_DDR_CONTROL | SDRAM_CFG_32_BE, &ddr->sdram_cfg);
__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
if (ddr_freq_mhz < 700) {
out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_667);
out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_667);
out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_667);
out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_667);
out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_667);
out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_667);
out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_667);
out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_667);
out_be32(&ddr->ddr_wrlvl_cntl,
CONFIG_SYS_DDR_WRLVL_CONTROL_667);
__raw_writel(CONFIG_SYS_DDR_TIMING_3_667, &ddr->timing_cfg_3);
__raw_writel(CONFIG_SYS_DDR_TIMING_0_667, &ddr->timing_cfg_0);
__raw_writel(CONFIG_SYS_DDR_TIMING_1_667, &ddr->timing_cfg_1);
__raw_writel(CONFIG_SYS_DDR_TIMING_2_667, &ddr->timing_cfg_2);
__raw_writel(CONFIG_SYS_DDR_MODE_1_667, &ddr->sdram_mode);
__raw_writel(CONFIG_SYS_DDR_MODE_2_667, &ddr->sdram_mode_2);
__raw_writel(CONFIG_SYS_DDR_INTERVAL_667, &ddr->sdram_interval);
__raw_writel(CONFIG_SYS_DDR_CLK_CTRL_667, &ddr->sdram_clk_cntl);
__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_667, &ddr->ddr_wrlvl_cntl);
} else {
out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3_800);
out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0_800);
out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1_800);
out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2_800);
out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1_800);
out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2_800);
out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL_800);
out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL_800);
out_be32(&ddr->ddr_wrlvl_cntl,
CONFIG_SYS_DDR_WRLVL_CONTROL_800);
__raw_writel(CONFIG_SYS_DDR_TIMING_3_800, &ddr->timing_cfg_3);
__raw_writel(CONFIG_SYS_DDR_TIMING_0_800, &ddr->timing_cfg_0);
__raw_writel(CONFIG_SYS_DDR_TIMING_1_800, &ddr->timing_cfg_1);
__raw_writel(CONFIG_SYS_DDR_TIMING_2_800, &ddr->timing_cfg_2);
__raw_writel(CONFIG_SYS_DDR_MODE_1_800, &ddr->sdram_mode);
__raw_writel(CONFIG_SYS_DDR_MODE_2_800, &ddr->sdram_mode_2);
__raw_writel(CONFIG_SYS_DDR_INTERVAL_800, &ddr->sdram_interval);
__raw_writel(CONFIG_SYS_DDR_CLK_CTRL_800, &ddr->sdram_clk_cntl);
__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_800, &ddr->ddr_wrlvl_cntl);
}
out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CONTROL);
__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
/* P1014 and it's derivatives support max 16bit DDR width */
if (svr == SVR_P1014) {

42
nand_spl/board/freescale/p1023rds/nand_boot.c
Unescape View File

@ -37,28 +37,28 @@ void sdram_init(void)
set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1);
out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
out_be32(&ddr->cs1_bnds, CONFIG_SYS_DDR_CS1_BNDS);
out_be32(&ddr->cs1_config, CONFIG_SYS_DDR_CS1_CONFIG);
out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL2);
out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1);
out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2);
out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL);
out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL);
out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
out_be32(&ddr->ddr_cdr1, CONFIG_SYS_DDR_CDR_1);
out_be32(&ddr->ddr_cdr2, CONFIG_SYS_DDR_CDR_2);
__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
__raw_writel(CONFIG_SYS_DDR_CONTROL2, &ddr->sdram_cfg_2);
__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
__raw_writel(CONFIG_SYS_DDR_ZQ_CNTL, &ddr->ddr_zq_cntl);
__raw_writel(CONFIG_SYS_DDR_WRLVL_CNTL, &ddr->ddr_wrlvl_cntl);
__raw_writel(CONFIG_SYS_DDR_CDR_1, &ddr->ddr_cdr1);
__raw_writel(CONFIG_SYS_DDR_CDR_2, &ddr->ddr_cdr2);
/* Set, but do not enable the memory */
out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN);
__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
asm volatile("sync;isync");
udelay(500);

48
nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
Unescape View File

@ -36,32 +36,32 @@ void sdram_init(void)
{
ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
out_be32(&ddr->cs1_bnds, CONFIG_SYS_DDR_CS1_BNDS);
out_be32(&ddr->cs1_config, CONFIG_SYS_DDR_CS1_CONFIG);
__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
#endif
out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL_2);
out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1);
out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2);
__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL);
out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL);
__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CONTROL);
out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CONTROL);
__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);
/* Set, but do not enable the memory */
out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN);
__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
asm volatile("sync;isync");
udelay(500);
@ -92,13 +92,13 @@ void board_init_f(ulong bootflag)
#ifndef CONFIG_QE
/* init DDR3 reset signal */
out_be32(&pgpio->gpdir, 0x02000000);
out_be32(&pgpio->gpodr, 0x00200000);
out_be32(&pgpio->gpdat, 0x00000000);
__raw_writel(0x02000000, &pgpio->gpdir);
__raw_writel(0x00200000, &pgpio->gpodr);
__raw_writel(0x00000000, &pgpio->gpdat);
udelay(1000);
out_be32(&pgpio->gpdat, 0x00200000);
__raw_writel(0x00200000, &pgpio->gpdat);
udelay(1000);
out_be32(&pgpio->gpdir, 0x00000000);
__raw_writel(0x00000000, &pgpio->gpdir);
#endif
/* Initialize the DDR3 */

Write Preview
Loading…
Cancel
Save