Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

powerpc/QorIQ: fix network frame manager TBI PHY address settings

Browse Source 
TBI PHY address (TBIPA) register has been set in general frame manager
phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c

So remove the duplicate code on QorIQ frame manager Ethernet related
platforms, which include Hydra board, P4080DS board and P2041rdb board.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Cc: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
master
Roy Zang 14 years ago committed by Kumar Gala
parent 5721385b18
commit afc52db2f7
3 changed files with 0 additions and 24 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 8
      board/freescale/corenet_ds/eth_hydra.c
  2. 8
      board/freescale/corenet_ds/eth_p4080.c
  3. 8
      board/freescale/p2041rdb/eth.c

8
board/freescale/corenet_ds/eth_hydra.c
Unescape View File

@ -377,7 +377,6 @@ void fdt_fixup_board_enet(void *fdt)
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_FMAN_ENET
struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
struct fsl_pq_mdio_info dtsec_mdio_info;
struct tgec_mdio_info tgec_mdio_info;
unsigned int i, slot;
@ -387,13 +386,6 @@ int board_eth_init(bd_t *bis)
initialize_lane_to_slot();
/*
* Set TBIPA on FM1@DTSEC1. This is needed for configurations
* where FM1@DTSEC1 isn't used directly, since it provides
* MDIO for other ports.
*/
out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
/* We want to use the PIXIS to configure MUX routing, not GPIOs. */
setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL);

8
board/freescale/corenet_ds/eth_p4080.c
Unescape View File

@ -301,7 +301,6 @@ int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_FMAN_ENET
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
int i;
struct fsl_pq_mdio_info dtsec_mdio_info;
struct tgec_mdio_info tgec_mdio_info;
@ -327,13 +326,6 @@ int board_eth_init(bd_t *bis)
SLOT5, /* 17 - Bank 3:D */
};
/*
* Set TBIPA on FM1@DTSEC1. This is needed for configurations
* where FM1@DTSEC1 isn't used directly, since it provides
* MDIO for other ports.
*/
out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
/* Initialize the mdio_mux array so we can recognize empty elements */
for (i = 0; i < NUM_FM_PORTS; i++)
mdio_mux[i] = EMI_NONE;

8
board/freescale/p2041rdb/eth.c
Unescape View File

@ -139,7 +139,6 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_FMAN_ENET
struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
struct fsl_pq_mdio_info dtsec_mdio_info;
struct tgec_mdio_info tgec_mdio_info;
unsigned int i, slot;
@ -149,13 +148,6 @@ int board_eth_init(bd_t *bis)
initialize_lane_to_slot();
/*
* Set TBIPA on FM1@DTSEC1. This is needed for configurations
* where FM1@DTSEC1 isn't used directly, since it provides
* MDIO for other ports.
*/
out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
dtsec_mdio_info.regs =
(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;

Write Preview
Loading…
Cancel
Save