Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

sunxi: Enable LDO3 and LDO4 at 2.8V on OLinuxIno Lime boards

Browse Source 
LDO3 and LDO4 are used to power port E resp. port G, which are exposed
on gpio headers, so enable them at 2.8V as specified in the schematic.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
master
Hans de Goede 8 years ago
parent 53866b6fc5
commit affa020559
3 changed files with 6 additions and 0 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 2
      configs/A10-OLinuXino-Lime_defconfig
  2. 2
      configs/A20-OLinuXino-Lime2_defconfig
  3. 2
      configs/A20-OLinuXino-Lime_defconfig

2
configs/A10-OLinuXino-Lime_defconfig
Unescape View File

@ -13,4 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y

2
configs/A20-OLinuXino-Lime2_defconfig
Unescape View File

@ -15,4 +15,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
CONFIG_CMD_GPIO=y
CONFIG_RTL8211X_PHY_FORCE_MASTER=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y

2
configs/A20-OLinuXino-Lime_defconfig
Unescape View File

@ -12,4 +12,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_USB_EHCI_HCD=y

Write Preview
Loading…
Cancel
Save