From b0857c45c1f535069acf90e671b5e4b6cf662caf Mon Sep 17 00:00:00 2001 From: Michael Trimarchi Date: Mon, 10 Jun 2013 18:18:04 +0200 Subject: [PATCH] usb: omap: ulpi: fix ulpi transceiver access This patch fix the omap access to the transceiver configuration registers using the ulpi bus. As reported by the documentation the bit31 is used only to check if the transaction is done or still running and the reading and writing operation have different offset and have different values. What we need to do at the end of a transaction is leave the bus in done state. Anyway an error using the ulpi omap register is not recoverable so any error give out the usage of this interface. Tested on a custom OMAP5430 board with a TUSB1210 ULPI PHY on USBB1. Signed-off-by: Michael Trimarchi Acked-by: Igor Grinberg Tested-by: Lubomir Popov Cc: Stefano Babic Cc: Marek Vasut Cc: Tom Rini --- drivers/usb/ulpi/omap-ulpi-viewport.c | 42 ++++++++--------------------------- 1 file changed, 9 insertions(+), 33 deletions(-) diff --git a/drivers/usb/ulpi/omap-ulpi-viewport.c b/drivers/usb/ulpi/omap-ulpi-viewport.c index 3c1ea1a..4db7fa4 100644 --- a/drivers/usb/ulpi/omap-ulpi-viewport.c +++ b/drivers/usb/ulpi/omap-ulpi-viewport.c @@ -22,18 +22,19 @@ #include #include -#define OMAP_ULPI_WR_OPSEL (3 << 21) -#define OMAP_ULPI_ACCESS (1 << 31) +#define OMAP_ULPI_WR_OPSEL (2 << 22) +#define OMAP_ULPI_RD_OPSEL (3 << 22) +#define OMAP_ULPI_START (1 << 31) /* - * Wait for the ULPI Access to complete + * Wait for having ulpi in done state */ static int ulpi_wait(struct ulpi_viewport *ulpi_vp, u32 mask) { int timeout = CONFIG_USB_ULPI_TIMEOUT; while (--timeout) { - if ((readl(ulpi_vp->viewport_addr) & mask)) + if (!(readl(ulpi_vp->viewport_addr) & mask)) return 0; udelay(1); @@ -43,40 +44,15 @@ static int ulpi_wait(struct ulpi_viewport *ulpi_vp, u32 mask) } /* - * Wake the ULPI PHY up for communication - * - * returns 0 on success. - */ -static int ulpi_wakeup(struct ulpi_viewport *ulpi_vp) -{ - int err; - - if (readl(ulpi_vp->viewport_addr) & OMAP_ULPI_ACCESS) - return 0; /* already awake */ - - writel(OMAP_ULPI_ACCESS, ulpi_vp->viewport_addr); - - err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS); - if (err) - debug("ULPI wakeup timed out\n"); - - return err; -} - -/* * Issue a ULPI read/write request */ static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value) { int err; - err = ulpi_wakeup(ulpi_vp); - if (err) - return err; - writel(value, ulpi_vp->viewport_addr); - err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS); + err = ulpi_wait(ulpi_vp, OMAP_ULPI_START); if (err) debug("ULPI request timed out\n"); @@ -85,7 +61,7 @@ static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value) int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value) { - u32 val = ((ulpi_vp->port_num & 0xf) << 24) | + u32 val = OMAP_ULPI_START | (((ulpi_vp->port_num + 1) & 0xf) << 24) | OMAP_ULPI_WR_OPSEL | ((u32)reg << 16) | (value & 0xff); return ulpi_request(ulpi_vp, val); @@ -94,8 +70,8 @@ int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value) u32 ulpi_read(struct ulpi_viewport *ulpi_vp, u8 *reg) { int err; - u32 val = ((ulpi_vp->port_num & 0xf) << 24) | - OMAP_ULPI_WR_OPSEL | ((u32)reg << 16); + u32 val = OMAP_ULPI_START | (((ulpi_vp->port_num + 1) & 0xf) << 24) | + OMAP_ULPI_RD_OPSEL | ((u32)reg << 16); err = ulpi_request(ulpi_vp, val); if (err)