Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

keymile: Fix Coding style issues for keymile boards.

Browse Source 
- use I/O accessors
  -> For accessing the FPGA therefore a struct km_bec_fpga
     is introduced.
- no longer externs needed
- to defines, that only select functions, don;t assign a
  numeric value
- Codingstyle changes to prevent checkpatch errors/warnings

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
cc: Kim Phillips <kim.phillips@freescale.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
master
Heiko Schocher 14 years ago committed by Wolfgang Denk
parent 802d996324
commit b11f53f31b
9 changed files with 476 additions and 420 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 347
      board/keymile/common/common.c
  2. 40
      board/keymile/common/common.h
  3. 24
      board/keymile/km_arm/km_arm.c
  4. 122
      board/keymile/kmeter1/kmeter1.c
  5. 82
      board/keymile/mgcoge/mgcoge.c
  6. 62
      include/configs/keymile-common.h
  7. 8
      include/configs/km_arm.h
  8. 104
      include/configs/kmeter1.h
  9. 107
      include/configs/mgcoge.h

347
board/keymile/common/common.c
Unescape View File

@ -39,9 +39,7 @@
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
#include <i2c.h>
extern int i2c_soft_read_pin (void);
int ivm_calc_crc (unsigned char *buf, int len)
int ivm_calc_crc(unsigned char *buf, int len)
{
const unsigned short crc_tab[16] = {
0x0000, 0xCC01, 0xD801, 0x1400,
@ -71,20 +69,20 @@ int ivm_calc_crc (unsigned char *buf, int len)
return crc;
}
static int ivm_set_value (char *name, char *value)
static int ivm_set_value(char *name, char *value)
{
char tempbuf[256];
if (value != NULL) {
sprintf (tempbuf, "%s=%s", name, value);
return set_local_var (tempbuf, 0);
sprintf(tempbuf, "%s=%s", name, value);
return set_local_var(tempbuf, 0);
} else {
unset_local_var (name);
unset_local_var(name);
}
return 0;
}
static int ivm_get_value (unsigned char *buf, int len, char *name, int off,
static int ivm_get_value(unsigned char *buf, int len, char *name, int off,
int check)
{
unsigned short val;
@ -92,21 +90,21 @@ static int ivm_get_value (unsigned char *buf, int len, char *name, int off,
if ((buf[off + 0] != buf[off + 2]) &&
(buf[off + 2] != buf[off + 4])) {
printf ("%s Error corrupted %s\n", __FUNCTION__, name);
printf("%s Error corrupted %s\n", __func__, name);
val = -1;
} else {
val = buf[off + 0] + (buf[off + 1] << 8);
if ((val == 0) && (check == 1))
val = -1;
}
sprintf ((char *)valbuf, "%x", val);
ivm_set_value (name, (char *)valbuf);
sprintf((char *)valbuf, "%x", val);
ivm_set_value(name, (char *)valbuf);
return val;
}
#define INVENTORYBLOCKSIZE 0x100
#define INVENTORYDATAADDRESS 0x21
#define INVENTORYDATASIZE (INVENTORYBLOCKSIZE - INVENTORYDATAADDRESS - 3)
#define INV_BLOCKSIZE 0x100
#define INV_DATAADDRESS 0x21
#define INVENTORYDATASIZE (INV_BLOCKSIZE - INV_DATAADDRESS - 3)
#define IVM_POS_SHORT_TEXT 0
#define IVM_POS_MANU_ID 1
@ -121,19 +119,19 @@ static int ivm_get_value (unsigned char *buf, int len, char *name, int off,
#define IVM_POS_HISTORY 10
#define IVM_POS_SYMBOL_ONLY 11
static char convert_char (char c)
static char convert_char(char c)
{
return (c < ' ' || c > '~') ? '.' : c;
}
static int ivm_findinventorystring (int type,
static int ivm_findinventorystring(int type,
unsigned char* const string,
unsigned long maxlen,
unsigned char *buf)
{
int xcode = 0;
unsigned long cr = 0;
unsigned long addr = INVENTORYDATAADDRESS;
unsigned long addr = INV_DATAADDRESS;
unsigned long size = 0;
unsigned long nr = type;
int stop = 0; /* stop on semicolon */
@ -157,8 +155,10 @@ static int ivm_findinventorystring (int type,
addr++;
}
/* the expected number of CR was found until the end of the IVM
* content --> fill string */
/*
* the expected number of CR was found until the end of the IVM
* content --> fill string
*/
if (addr < INVENTORYDATASIZE) {
/* Copy the IVM string in the corresponding string */
for (; (buf[addr] != '\r') &&
@ -170,64 +170,62 @@ static int ivm_findinventorystring (int type,
convert_char (buf[addr]));
}
/* copy phase is done: check if everything is ok. If not,
/*
* copy phase is done: check if everything is ok. If not,
* the inventory data is most probably corrupted: tell
* the world there is a problem! */
* the world there is a problem!
*/
if (addr == INVENTORYDATASIZE) {
xcode = -1;
printf ("Error end of string not found\n");
printf("Error end of string not found\n");
} else if ((size >= (maxlen - 1)) &&
(buf[addr] != '\r')) {
xcode = -1;
printf ("string too long till next CR\n");
printf("string too long till next CR\n");
}
} else {
/* some CR are missing...
* the inventory data is most probably corrupted */
/*
* some CR are missing...
* the inventory data is most probably corrupted
*/
xcode = -1;
printf ("not enough cr found\n");
printf("not enough cr found\n");
}
return xcode;
}
#define GET_STRING(name, which, len) \
if (ivm_findinventorystring (which, valbuf, len, buf) == 0) { \
ivm_set_value (name, (char *)valbuf); \
if (ivm_findinventorystring(which, valbuf, len, buf) == 0) { \
ivm_set_value(name, (char *)valbuf); \
}
static int ivm_check_crc (unsigned char *buf, int block)
static int ivm_check_crc(unsigned char *buf, int block)
{
unsigned long crc;
unsigned long crceeprom;
crc = ivm_calc_crc (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2);
crc = ivm_calc_crc(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2);
crceeprom = (buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 1] + \
buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2] * 256);
if (crc != crceeprom) {
if (block == 0)
printf ("Error CRC Block: %d EEprom: calculated: \
printf("Error CRC Block: %d EEprom: calculated: \
%lx EEprom: %lx\n", block, crc, crceeprom);
return -1;
}
return 0;
}
static int ivm_analyze_block2 (unsigned char *buf, int len)
static int ivm_analyze_block2(unsigned char *buf, int len)
{
unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
unsigned long count;
/* IVM_MacAddress */
sprintf ((char *)valbuf, "%02X:%02X:%02X:%02X:%02X:%02X",
buf[1],
buf[2],
buf[3],
buf[4],
buf[5],
buf[6]);
ivm_set_value ("IVM_MacAddress", (char *)valbuf);
if (getenv ("ethaddr") == NULL)
setenv ((char *)"ethaddr", (char *)valbuf);
sprintf((char *)valbuf, "%pM", buf);
ivm_set_value("IVM_MacAddress", (char *)valbuf);
if (getenv("ethaddr") == NULL)
setenv((char *)"ethaddr", (char *)valbuf);
/* IVM_MacCount */
count = (buf[10] << 24) +
(buf[11] << 16) +
@ -235,48 +233,52 @@ static int ivm_analyze_block2 (unsigned char *buf, int len)
buf[13];
if (count == 0xffffffff)
count = 1;
sprintf ((char *)valbuf, "%lx", count);
ivm_set_value ("IVM_MacCount", (char *)valbuf);
sprintf((char *)valbuf, "%lx", count);
ivm_set_value("IVM_MacCount", (char *)valbuf);
return 0;
}
int ivm_analyze_eeprom (unsigned char *buf, int len)
int ivm_analyze_eeprom(unsigned char *buf, int len)
{
unsigned short val;
unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
unsigned char *tmp;
if (ivm_check_crc (buf, 0) != 0)
if (ivm_check_crc(buf, 0) != 0)
return -1;
ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_BoardId", 0, 1);
val = ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_HWKey", 6, 1);
ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN,
"IVM_BoardId", 0, 1);
val = ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN,
"IVM_HWKey", 6, 1);
if (val != 0xffff) {
sprintf ((char *)valbuf, "%x", ((val /100) % 10));
ivm_set_value ("IVM_HWVariant", (char *)valbuf);
sprintf ((char *)valbuf, "%x", (val % 100));
ivm_set_value ("IVM_HWVersion", (char *)valbuf);
sprintf((char *)valbuf, "%x", ((val / 100) % 10));
ivm_set_value("IVM_HWVariant", (char *)valbuf);
sprintf((char *)valbuf, "%x", (val % 100));
ivm_set_value("IVM_HWVersion", (char *)valbuf);
}
ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_Functions", 12, 0);
ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN,
"IVM_Functions", 12, 0);
GET_STRING("IVM_Symbol", IVM_POS_SYMBOL_ONLY, 8)
GET_STRING("IVM_DeviceName", IVM_POS_SHORT_TEXT, 64)
tmp = (unsigned char *) getenv("IVM_DeviceName");
if (tmp) {
int len = strlen ((char *)tmp);
int len = strlen((char *)tmp);
int i = 0;
while (i < len) {
if (tmp[i] == ';') {
ivm_set_value ("IVM_ShortText", (char *)&tmp[i + 1]);
ivm_set_value("IVM_ShortText",
(char *)&tmp[i + 1]);
break;
}
i++;
}
if (i >= len)
ivm_set_value ("IVM_ShortText", NULL);
ivm_set_value("IVM_ShortText", NULL);
} else {
ivm_set_value ("IVM_ShortText", NULL);
ivm_set_value("IVM_ShortText", NULL);
}
GET_STRING("IVM_ManufacturerID", IVM_POS_MANU_ID, 32)
GET_STRING("IVM_ManufacturerSerialNumber", IVM_POS_MANU_SERIAL, 20)
@ -288,14 +290,15 @@ int ivm_analyze_eeprom (unsigned char *buf, int len)
GET_STRING("IVM_CustomerID", IVM_POS_CUSTOMER_ID, 32)
GET_STRING("IVM_CustomerProductID", IVM_POS_CUSTOMER_PROD_ID, 32)
if (ivm_check_crc (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0)
if (ivm_check_crc(&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0)
return 0;
ivm_analyze_block2 (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], CONFIG_SYS_IVM_EEPROM_PAGE_LEN);
ivm_analyze_block2(&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2],
CONFIG_SYS_IVM_EEPROM_PAGE_LEN);
return 0;
}
int ivm_read_eeprom (void)
int ivm_read_eeprom(void)
{
#if defined(CONFIG_I2C_MUX)
I2C_MUX_DEVICE *dev = NULL;
@ -303,33 +306,36 @@ int ivm_read_eeprom (void)
uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
uchar *buf;
unsigned dev_addr = CONFIG_SYS_IVM_EEPROM_ADR;
int ret;
#if defined(CONFIG_I2C_MUX)
/* First init the Bus, select the Bus */
#if defined(CONFIG_SYS_I2C_IVM_BUS)
dev = i2c_mux_ident_muxstring ((uchar *)CONFIG_SYS_I2C_IVM_BUS);
dev = i2c_mux_ident_muxstring((uchar *)CONFIG_SYS_I2C_IVM_BUS);
#else
buf = (unsigned char *) getenv ("EEprom_ivm");
buf = (unsigned char *) getenv("EEprom_ivm");
if (buf != NULL)
dev = i2c_mux_ident_muxstring (buf);
dev = i2c_mux_ident_muxstring(buf);
#endif
if (dev == NULL) {
printf ("Error couldnt add Bus for IVM\n");
printf("Error couldnt add Bus for IVM\n");
return -1;
}
i2c_set_bus_num (dev->busid);
i2c_set_bus_num(dev->busid);
#endif
buf = (unsigned char *) getenv ("EEprom_ivm_addr");
buf = (unsigned char *) getenv("EEprom_ivm_addr");
if (buf != NULL)
dev_addr = simple_strtoul ((char *)buf, NULL, 16);
dev_addr = simple_strtoul((char *)buf, NULL, 16);
if (i2c_read(dev_addr, 0, 1, i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN) != 0) {
ret = i2c_read(dev_addr, 0, 1, i2c_buffer,
CONFIG_SYS_IVM_EEPROM_MAX_LEN);
if (ret != 0) {
printf ("Error reading EEprom\n");
return -2;
}
return ivm_analyze_eeprom (i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
return ivm_analyze_eeprom(i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
}
#if defined(CONFIG_SYS_I2C_INIT_BOARD)
@ -339,145 +345,117 @@ int ivm_read_eeprom (void)
#if defined(CONFIG_MGCOGE)
#define SDA_MASK 0x00010000
#define SCL_MASK 0x00020000
static void set_pin (int state, unsigned long mask)
static void set_pin(int state, unsigned long mask)
{
volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
if (state)
iop->pdat |= (mask);
setbits_be32(&iop->pdat, mask);
else
iop->pdat &= ~(mask);
clrbits_be32(&iop->pdat, mask);
iop->pdir |= (mask);
setbits_be32(&iop->pdir, mask);
}
static int get_pin (unsigned long mask)
static int get_pin(unsigned long mask)
{
volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
iop->pdir &= ~(mask);
return (0 != (iop->pdat & (mask)));
clrbits_be32(&iop->pdir, mask);
return 0 != (in_be32(&iop->pdat) & mask);
}
static void set_sda (int state)
static void set_sda(int state)
{
set_pin (state, SDA_MASK);
set_pin(state, SDA_MASK);
}
static void set_scl (int state)
static void set_scl(int state)
{
set_pin (state, SCL_MASK);
set_pin(state, SCL_MASK);
}
static int get_sda (void)
static int get_sda(void)
{
return get_pin (SDA_MASK);
return get_pin(SDA_MASK);
}
static int get_scl (void)
static int get_scl(void)
{
return get_pin (SCL_MASK);
return get_pin(SCL_MASK);
}
#if defined(CONFIG_HARD_I2C)
static void setports (int gpio)
static void setports(int gpio)
{
volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3);
ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
if (gpio) {
iop->ppar &= ~(SDA_MASK | SCL_MASK);
iop->podr &= ~(SDA_MASK | SCL_MASK);
clrbits_be32(&iop->ppar, (SDA_MASK | SCL_MASK));
clrbits_be32(&iop->podr, (SDA_MASK | SCL_MASK));
} else {
iop->ppar |= (SDA_MASK | SCL_MASK);
iop->pdir &= ~(SDA_MASK | SCL_MASK);
iop->podr |= (SDA_MASK | SCL_MASK);
setbits_be32(&iop->ppar, (SDA_MASK | SCL_MASK));
clrbits_be32(&iop->pdir, (SDA_MASK | SCL_MASK));
setbits_be32(&iop->podr, (SDA_MASK | SCL_MASK));
}
}
#endif
#endif
#if defined(CONFIG_KM8XX)
static void set_sda (int state)
{
I2C_SDA(state);
}
static void set_scl (int state)
{
I2C_SCL(state);
}
static int get_sda (void)
{
return I2C_READ;
}
static int get_scl (void)
{
int val;
*(unsigned short *)(I2C_BASE_DIR) &= ~SCL_CONF;
udelay (1);
val = *(unsigned char *)(I2C_BASE_PORT);
return ((val & SCL_BIT) == SCL_BIT);
}
#endif
#if !defined(CONFIG_KMETER1)
static void writeStartSeq (void)
static void writeStartSeq(void)
{
set_sda (1);
udelay (DELAY_HALF_PERIOD);
set_scl (1);
udelay (DELAY_HALF_PERIOD);
set_sda (0);
udelay (DELAY_HALF_PERIOD);
set_scl (0);
udelay (DELAY_HALF_PERIOD);
set_sda(1);
udelay(DELAY_HALF_PERIOD);
set_scl(1);
udelay(DELAY_HALF_PERIOD);
set_sda(0);
udelay(DELAY_HALF_PERIOD);
set_scl(0);
udelay(DELAY_HALF_PERIOD);
}
/* I2C is a synchronous protocol and resets of the processor in the middle
of an access can block the I2C Bus until a powerdown of the full unit is
done. This function toggles the SCL until the SCL and SCA line are
released, but max. 16 times, after this a I2C start-sequence is sent.
This I2C Deblocking mechanism was developed by Keymile in association
with Anatech and Atmel in 1998.
/*
* I2C is a synchronous protocol and resets of the processor in the middle
* of an access can block the I2C Bus until a powerdown of the full unit is
* done. This function toggles the SCL until the SCL and SCA line are
* released, but max. 16 times, after this a I2C start-sequence is sent.
* This I2C Deblocking mechanism was developed by Keymile in association
* with Anatech and Atmel in 1998.
*/
static int i2c_make_abort (void)
static int i2c_make_abort(void)
{
int scl_state = 0;
int sda_state = 0;
int i = 0;
int ret = 0;
if (!get_sda ()) {
if (!get_sda()) {
ret = -1;
while (i < 16) {
i++;
set_scl (0);
udelay (DELAY_ABORT_SEQ);
set_scl (1);
udelay (DELAY_ABORT_SEQ);
scl_state = get_scl ();
sda_state = get_sda ();
set_scl(0);
udelay(DELAY_ABORT_SEQ);
set_scl(1);
udelay(DELAY_ABORT_SEQ);
scl_state = get_scl();
sda_state = get_sda();
if (scl_state && sda_state) {
ret = 0;
break;
}
}
}
if (ret == 0) {
for (i =0; i < 5; i++) {
writeStartSeq ();
}
}
get_sda ();
if (ret == 0)
for (i = 0; i < 5; i++)
writeStartSeq();
get_sda();
return ret;
}
#endif
/**
/*
* i2c_init_board - reset i2c bus. When the board is powercycled during a
* bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
*/
@ -488,36 +466,37 @@ void i2c_init_board(void)
dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
uchar dummy;
out_8 (&dev->cr, (I2C_CR_MSTA));
out_8 (&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
out_8(&dev->cr, (I2C_CR_MSTA));
out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
dummy = in_8(&dev->dr);
dummy = in_8(&dev->dr);
if (dummy != 0xff) {
dummy = in_8(&dev->dr);
}
out_8 (&dev->cr, (I2C_CR_MEN));
out_8 (&dev->cr, 0x00);
out_8 (&dev->cr, (I2C_CR_MEN));
out_8(&dev->cr, (I2C_CR_MEN));
out_8(&dev->cr, 0x00);
out_8(&dev->cr, (I2C_CR_MEN));
#else
#if defined(CONFIG_HARD_I2C) && !defined(MACH_TYPE_KM_KIRKWOOD)
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
/* disable I2C controller first, otherwhise it thinks we want to */
/* talk to the slave port... */
i2c->i2c_i2mod &= ~0x01;
/*
* disable I2C controller first, otherwhise it thinks we want to
* talk to the slave port...
*/
clrbits_8(&i2c->i2c_i2mod, 0x01);
/* Set the PortPins to GPIO */
setports (1);
setports(1);
#endif
/* Now run the AbortSequence() */
i2c_make_abort ();
i2c_make_abort();
#if defined(CONFIG_HARD_I2C)
/* Set the PortPins back to use for I2C */
setports (0);
setports(0);
#endif
#endif
}
@ -525,7 +504,7 @@ void i2c_init_board(void)
#endif
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
int fdt_set_node_and_value (void *blob,
int fdt_set_node_and_value(void *blob,
char *nodename,
char *regname,
void *var,
@ -534,21 +513,22 @@ int fdt_set_node_and_value (void *blob,
int ret = 0;
int nodeoffset = 0;
nodeoffset = fdt_path_offset (blob, nodename);
nodeoffset = fdt_path_offset(blob, nodename);
if (nodeoffset >= 0) {
ret = fdt_setprop (blob, nodeoffset, regname, var,
ret = fdt_setprop(blob, nodeoffset, regname, var,
size);
if (ret < 0)
printf("ft_blob_update(): cannot set %s/%s "
"property err:%s\n", nodename, regname,
fdt_strerror (ret));
fdt_strerror(ret));
} else {
printf("ft_blob_update(): cannot find %s node "
"err:%s\n", nodename, fdt_strerror (nodeoffset));
"err:%s\n", nodename, fdt_strerror(nodeoffset));
}
return ret;
}
int fdt_get_node_and_value (void *blob,
int fdt_get_node_and_value(void *blob,
char *nodename,
char *propname,
void **var)
@ -556,42 +536,43 @@ int fdt_get_node_and_value (void *blob,
int len;
int nodeoffset = 0;
nodeoffset = fdt_path_offset (blob, nodename);
nodeoffset = fdt_path_offset(blob, nodename);
if (nodeoffset >= 0) {
*var = (void *)fdt_getprop (blob, nodeoffset, propname, &len);
*var = (void *)fdt_getprop(blob, nodeoffset, propname, &len);
if (len == 0) {
/* no value */
printf ("%s no value\n", __FUNCTION__);
printf("%s no value\n", __func__);
return -1;
} else if (len > 0) {
return len;
} else {
printf ("libfdt fdt_getprop(): %s\n",
printf("libfdt fdt_getprop(): %s\n",
fdt_strerror(len));
return -2;
}
} else {
printf("%s: cannot find %s node err:%s\n", __FUNCTION__,
nodename, fdt_strerror (nodeoffset));
printf("%s: cannot find %s node err:%s\n", __func__,
nodename, fdt_strerror(nodeoffset));
return -3;
}
}
#endif
#if !defined(MACH_TYPE_KM_KIRKWOOD)
int ethernet_present (void)
int ethernet_present(void)
{
return (in_8((u8 *)CONFIG_SYS_PIGGY_BASE + CONFIG_SYS_SLOT_ID_OFF) & 0x80);
struct km_bec_fpga *base = (struct km_bec_fpga *)CONFIG_SYS_PIGGY_BASE;
return in_8(&base->bprth) & PIGGY_PRESENT;
}
#endif
int board_eth_init (bd_t *bis)
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_KEYMILE_HDLC_ENET
(void)keymile_hdlc_enet_initialize (bis);
(void)keymile_hdlc_enet_initialize(bis);
#endif
if (ethernet_present ()) {
if (ethernet_present())
return -1;
}
return 0;
}

40
board/keymile/common/common.h
Unescape View File

@ -11,20 +11,50 @@
#ifndef __KEYMILE_COMMON_H
#define __KEYMILE_COMMON_H
int ethernet_present (void);
int ivm_read_eeprom (void);
#define WRG_RESET 0x80
#define H_OPORTS_14 0x40
#define WRG_LED 0x02
#define WRL_BOOT 0x01
#define H_OPORTS_SCC4_ENA 0x10
#define H_OPORTS_SCC4_FD_ENA 0x04
#define H_OPORTS_FCC1_PW_DWN 0x01
#define PIGGY_PRESENT 0x80
struct km_bec_fpga {
unsigned char id;
unsigned char rev;
unsigned char oprth;
unsigned char oprtl;
unsigned char res1[3];
unsigned char bprth;
unsigned char bprtl;
unsigned char res2[6];
unsigned char prst;
unsigned char res3[0xfff0];
unsigned char pgy_id;
unsigned char pgy_rev;
unsigned char pgy_outputs;
unsigned char pgy_eth;
};
int ethernet_present(void);
int ivm_read_eeprom(void);
#ifdef CONFIG_KEYMILE_HDLC_ENET
int keymile_hdlc_enet_initialize (bd_t *bis);
int keymile_hdlc_enet_initialize(bd_t *bis);
#endif
int fdt_set_node_and_value (void *blob,
int fdt_set_node_and_value(void *blob,
char *nodename,
char *regname,
void *var,
int size);
int fdt_get_node_and_value (void *blob,
int fdt_get_node_and_value(void *blob,
char *nodename,
char *propname,
void **var);
int i2c_soft_read_pin(void);
#endif /* __KEYMILE_COMMON_H */

24
board/keymile/km_arm/km_arm.c
Unescape View File

@ -108,12 +108,12 @@ int ethernet_present(void)
int ret = 0;
if (i2c_read(0x10, 2, 1, &buf, 1) != 0) {
printf ("%s: Error reading Boco\n", __FUNCTION__);
printf("%s: Error reading Boco\n", __func__);
return -1;
}
if ((buf & 0x40) == 0x40) {
if ((buf & 0x40) == 0x40)
ret = 1;
}
return ret;
}
@ -258,15 +258,15 @@ void reset_phy(void)
}
#if defined(CONFIG_HUSH_INIT_VAR)
int hush_init_var (void)
int hush_init_var(void)
{
ivm_read_eeprom ();
ivm_read_eeprom();
return 0;
}
#endif
#if defined(CONFIG_BOOTCOUNT_LIMIT)
void bootcount_store (ulong a)
void bootcount_store(ulong a)
{
volatile ulong *save_addr;
volatile ulong size = 0;
@ -279,7 +279,7 @@ void bootcount_store (ulong a)
writel(BOOTCOUNT_MAGIC, &save_addr[1]);
}
ulong bootcount_load (void)
ulong bootcount_load(void)
{
volatile ulong *save_addr;
volatile ulong size = 0;
@ -296,31 +296,31 @@ ulong bootcount_load (void)
#endif
#if defined(CONFIG_SOFT_I2C)
void set_sda (int state)
void set_sda(int state)
{
I2C_ACTIVE;
I2C_SDA(state);
}
void set_scl (int state)
void set_scl(int state)
{
I2C_SCL(state);
}
int get_sda (void)
int get_sda(void)
{
I2C_TRISTATE;
return I2C_READ;
}
int get_scl (void)
int get_scl(void)
{
return (kw_gpio_get_value(SUEN3_SCL_PIN) ? 1 : 0);
}
#endif
#if defined(CONFIG_SYS_EEPROM_WREN)
int eeprom_write_enable (unsigned dev_addr, int state)
int eeprom_write_enable(unsigned dev_addr, int state)
{
kw_gpio_set_value(SUEN3_ENV_WP, !state);

122
board/keymile/kmeter1/kmeter1.c
Unescape View File

@ -30,8 +30,6 @@
#include "../common/common.h"
extern void disable_addr_trans (void);
extern void enable_addr_trans (void);
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* port pin dir open_drain assign */
@ -62,131 +60,140 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
{0, 0, 0, 0, QE_IOP_TAB_END},
};
static int board_init_i2c_busses (void)
static int board_init_i2c_busses(void)
{
I2C_MUX_DEVICE *dev = NULL;
uchar *buf;
/* Set up the Bus for the DTTs */
buf = (unsigned char *) getenv ("dtt_bus");
buf = (unsigned char *) getenv("dtt_bus");
if (buf != NULL)
dev = i2c_mux_ident_muxstring (buf);
dev = i2c_mux_ident_muxstring(buf);
if (dev == NULL) {
printf ("Error couldn't add Bus for DTT\n");
printf ("please setup dtt_bus to where your\n");
printf ("DTT is found.\n");
printf("Error couldn't add Bus for DTT\n");
printf("please setup dtt_bus to where your\n");
printf("DTT is found.\n");
}
return 0;
}
int board_early_init_r (void)
int board_early_init_r(void)
{
struct km_bec_fpga *base = (struct km_bec_fpga *)CONFIG_SYS_PIGGY_BASE;
unsigned short svid;
/*
* Because of errata in the UCCs, we have to write to the reserved
* registers to slow the clocks down.
*/
svid = SVR_REV(mfspr (SVR));
svid = SVR_REV(mfspr(SVR));
switch (svid) {
case 0x0020:
/*
* MPC8360ECE.pdf QE_ENET10 table 4:
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
*/
setbits_be32((void *)(CONFIG_SYS_IMMR + 0x14a8), 0x0c003000);
break;
case 0x0021:
/*
* MPC8360ECE.pdf QE_ENET10 table 4:
* IMMR + 0x14AC[24:27] = 1010
*/
clrsetbits_be32((void *)(CONFIG_SYS_IMMR + 0x14ac),
0x00000050, 0x000000a0);
break;
}
/* enable the PHY on the PIGGY */
setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x10003), 0x01);
setbits_8(&base->pgy_eth, 0x01);
/* enable the Unit LED (green) */
setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x00002), 0x01);
setbits_8(&base->oprth, WRL_BOOT);
/* take FE/GbE PHYs out of reset */
setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x0000f), 0x1c);
setbits_8(&base->prst, 0x1c);
return 0;
}
int misc_init_r (void)
int misc_init_r(void)
{
/* add board specific i2c busses */
board_init_i2c_busses ();
board_init_i2c_busses();
return 0;
}
int fixed_sdram(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = 0;
u32 ddr_size;
u32 ddr_size_log2;
im->sysconf.ddrlaw[0].ar = LAWAR_EN | 0x1e;
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
udelay (200);
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
out_be32(&im->sysconf.ddrlaw[0].ar, (LAWAR_EN | 0x1e));
out_be32(&im->ddr.csbnds[0].csbnds, CONFIG_SYS_DDR_CS0_BNDS);
out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG);
out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2);
out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2);
out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL);
udelay(200);
out_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
msize = CONFIG_SYS_DDR_SIZE << 20;
disable_addr_trans ();
msize = get_ram_size (CONFIG_SYS_DDR_BASE, msize);
enable_addr_trans ();
disable_addr_trans();
msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize);
enable_addr_trans();
msize /= (1024 * 1024);
if (CONFIG_SYS_DDR_SIZE != msize) {
for (ddr_size = msize << 20, ddr_size_log2 = 0;
(ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++)
(ddr_size > 1);
ddr_size = ddr_size >> 1, ddr_size_log2++)
if (ddr_size & 1)
return -1;
im->sysconf.ddrlaw[0].ar =
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
im->ddr.csbnds[0].csbnds = (((msize / 16) - 1) & 0xff);
out_be32(&im->sysconf.ddrlaw[0].ar,
(LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE)));
out_be32(&im->ddr.csbnds[0].csbnds,
(((msize / 16) - 1) & 0xff));
}
return msize;
}
phys_size_t initdram (int board_type)
phys_size_t initdram(int board_type)
{
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc (unsigned int dram_size);
#endif
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
/* DDR SDRAM - Main SODIMM */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
msize = fixed_sdram ();
out_be32(&im->sysconf.ddrlaw[0].bar,
CONFIG_SYS_DDR_BASE & LAWBAR_BAR);
msize = fixed_sdram();
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize DDR ECC byte
*/
ddr_enable_ecc (msize * 1024 * 1024);
ddr_enable_ecc(msize * 1024 * 1024);
#endif
/* return total bus SDRAM size(bytes) -- DDR */
return (msize * 1024 * 1024);
}
int checkboard (void)
int checkboard(void)
{
puts ("Board: Keymile kmeter1");
if (ethernet_present ())
puts (" with PIGGY.");
puts ("\n");
puts("Board: Keymile kmeter1");
if (ethernet_present())
puts(" with PIGGY.");
puts("\n");
return 0;
}
@ -194,13 +201,13 @@ int checkboard (void)
/*
* update property in the blob
*/
void ft_blob_update (void *blob, bd_t *bd)
void ft_blob_update(void *blob, bd_t *bd)
{
/* no board specific update */
}
void ft_board_setup (void *blob, bd_t *bd)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
ft_blob_update (blob, bd);
@ -208,10 +215,9 @@ void ft_board_setup (void *blob, bd_t *bd)
#endif
#if defined(CONFIG_HUSH_INIT_VAR)
extern int ivm_read_eeprom (void);
int hush_init_var (void)
int hush_init_var(void)
{
ivm_read_eeprom ();
ivm_read_eeprom();
return 0;
}
#endif

82
board/keymile/mgcoge/mgcoge.c
Unescape View File

@ -195,33 +195,30 @@ const iop_conf_t iop_conf_tab[4][32] = {
}
};
/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
/*
* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
*
* This routine performs standard 8260 initialization sequence
* and calculates the available memory size. It may be called
* several times to try different SDRAM configurations on both
* 60x and local buses.
*/
static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
ulong orx, volatile uchar * base)
static long int try_init(memctl8260_t *memctl, ulong sdmr,
ulong orx, uchar *base)
{
volatile uchar c = 0xff;
volatile uint *sdmr_ptr;
volatile uint *orx_ptr;
uchar c = 0xff;
ulong maxsize, size;
int i;
/* We must be able to test a location outsize the maximum legal size
/*
* We must be able to test a location outsize the maximum legal size
* to find out THAT we are outside; but this address still has to be
* mapped by the controller. That means, that the initial mapping has
* to be (at least) twice as large as the maximum expected size.
*/
maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
sdmr_ptr = &memctl->memc_psdmr;
orx_ptr = &memctl->memc_or1;
*orx_ptr = orx;
out_be32(&memctl->memc_or1, orx);
/*
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
@ -243,53 +240,54 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
* get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
*base = c;
out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_PREA);
out_8(base, c);
*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_CBRR);
for (i = 0; i < 8; i++)
*base = c;
out_8(base, c);
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
*(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_MRW);
/* setting MR on address lines */
out_8((uchar *)(base + CONFIG_SYS_MRS_OFFS), c);
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_NORM | PSDMR_RFEN);
out_8(base, c);
size = get_ram_size ((long *)base, maxsize);
*orx_ptr = orx | ~(size - 1);
size = get_ram_size((long *)base, maxsize);
out_be32(&memctl->memc_or1, orx | ~(size - 1));
return (size);
}
phys_size_t initdram (int board_type)
phys_size_t initdram(int board_type)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
memctl8260_t *memctl = &immap->im_memctl;
long psize;
memctl->memc_psrt = CONFIG_SYS_PSRT;
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
out_8(&memctl->memc_psrt, CONFIG_SYS_PSRT);
out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1,
(uchar *) CONFIG_SYS_SDRAM_BASE);
psize = try_init(memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1,
(uchar *) CONFIG_SYS_SDRAM_BASE);
#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();
icache_enable();
return (psize);
}
int checkboard(void)
{
puts ("Board: Keymile mgcoge");
if (ethernet_present ())
puts (" with PIGGY.");
puts ("\n");
puts("Board: Keymile mgcoge");
if (ethernet_present())
puts(" with PIGGY.");
puts("\n");
return 0;
}
@ -314,25 +312,29 @@ int last_stage_init(void)
/*
* Early board initalization.
*/
int board_early_init_r (void)
int board_early_init_r(void)
{
struct km_bec_fpga *base = (struct km_bec_fpga *)CONFIG_SYS_PIGGY_BASE;
/* setup the UPIOx */
/* General Unit Reset disabled, Flash Bank enabled, UnitLed on */
out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x02), 0xc2);
out_8(&base->oprth, (WRG_RESET | H_OPORTS_14 | WRG_LED));
/* SCC4 enable, halfduplex, FCC1 powerdown */
out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x03), 0x15);
out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA |
H_OPORTS_FCC1_PW_DWN));
return 0;
}
int hush_init_var (void)
int hush_init_var(void)
{
ivm_read_eeprom ();
ivm_read_eeprom();
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
void ft_board_setup (void *blob, bd_t *bd)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup (blob, bd);
ft_cpu_setup(blob, bd);
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */

62
include/configs/keymile-common.h
Unescape View File

@ -1,5 +1,5 @@
/*
* (C) Copyright 2008
* (C) Copyright 2008-2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* See file CREDITS for list of people who contributed to this
@ -25,7 +25,7 @@
#define __CONFIG_KEYMILE_H
/* Do boardspecific init for all boards */
#define CONFIG_BOARD_EARLY_INIT_R 1
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_BOOTCOUNT_LIMIT
@ -63,44 +63,44 @@
#define CONFIG_JFFS2_CMDLINE
#define CONFIG_CMD_MTDPARTS
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_HUSH_INIT_VAR 1
#define CONFIG_HUSH_INIT_VAR
#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x100000
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */
#define CONFIG_BAUDRATE 115200
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */
/*
@ -108,28 +108,28 @@
* to modify in a centralized location. This is used in the HDLC
* driver to set the MAC.
*/
#define CONFIG_CHECK_ETHERNET_PRESENT 1
#define CONFIG_CHECK_ETHERNET_PRESENT
#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE
#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
#define CONFIG_I2C_MULTI_BUS 1
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 1
#define CONFIG_SYS_I2C_INIT_BOARD 1
#define CONFIG_I2C_MUX 1
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_I2C_MUX
/* EEprom support */
#define CONFIG_SYS_I2C_MULTI_EEPROMS 1
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
/* Support the IVM EEprom */
#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
#define CONFIG_SYS_FLASH_PROTECTION 1
#define CONFIG_SYS_FLASH_PROTECTION
/*
* BOOTP options
@ -141,7 +141,7 @@
#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
/* UBI Support for all Keymile boards */
#define CONFIG_CMD_UBI

8
include/configs/km_arm.h
Unescape View File

@ -6,6 +6,9 @@
* (C) Copyright 2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2010-2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
@ -25,7 +28,10 @@
* MA 02110-1301 USA
*/
/* for linking errors see http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
/*
* for linking errors see
* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
*/
#ifndef _CONFIG_KM_ARM_H
#define _CONFIG_KM_ARM_H

104
include/configs/kmeter1.h
Unescape View File

@ -23,11 +23,9 @@
/*
* High Level Configuration Options
*/
#define CONFIG_E300 1 /* E300 family */
#define CONFIG_QE 1 /* Has QE */
#define CONFIG_MPC83xx 1 /* MPC83xx family */
#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */
#define CONFIG_KMETER1 1 /* KMETER1 board specific */
#define CONFIG_QE /* Has QE */
#define CONFIG_MPC8360 /* MPC8360 CPU specific */
#define CONFIG_KMETER1 /* KMETER1 board specific */
#define CONFIG_HOSTNAME kmeter1
#define CONFIG_SYS_TEXT_BASE 0xF0000000
@ -42,7 +40,7 @@
"mtdparts=boot:768k(u-boot),128k(env),128k(envred)," \
"-(" CONFIG_KM_UBI_PARTITION_NAME ")"
#define CONFIG_MISC_INIT_R 1
#define CONFIG_MISC_INIT_R
/*
* System Clock Setup
*/
@ -114,8 +112,9 @@
#define CONFIG_SYS_DDR_SIZE 2048 /* MB */
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f
#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
CSCONFIG_ROW_BIT_13 | \
CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS)
CSCONFIG_ROW_BIT_13 | \
CSCONFIG_COL_BIT_10 | \
CSCONFIG_ODT_WR_ACS)
#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
SDRAM_CFG_SREN)
@ -137,14 +136,14 @@
(0 << TIMING_CFG0_WRT_SHIFT) | \
(0 << TIMING_CFG0_RWT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_1 (( TIMING_CFG1_CASLAT_50) | \
( 2 << TIMING_CFG1_WRTORD_SHIFT) | \
( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
( 3 << TIMING_CFG1_WRREC_SHIFT) | \
( 7 << TIMING_CFG1_REFREC_SHIFT) | \
( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \
( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
( 3 << TIMING_CFG1_PRETOACT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
(2 << TIMING_CFG1_WRTORD_SHIFT) | \
(2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
(3 << TIMING_CFG1_WRREC_SHIFT) | \
(7 << TIMING_CFG1_REFREC_SHIFT) | \
(3 << TIMING_CFG1_ACTTORW_SHIFT) | \
(8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
(3 << TIMING_CFG1_PRETOACT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
(3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
@ -172,7 +171,7 @@
#undef CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve for Mon */
/*
* Initial RAM Base Address Setup
@ -180,7 +179,8 @@
#define CONFIG_SYS_INIT_RAM_LOCK 1
#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
/*
* Local Bus Configuration & Clock Setup
@ -208,7 +208,7 @@
#define CONFIG_SYS_FLASH_PROTECTION 1
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at flash base */
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001b /* 256MB window size */
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
@ -220,8 +220,9 @@
OR_GPCM_SCY_5 | \
OR_GPCM_TRLX | OR_GPCM_EAD)
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
/* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT 512
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#undef CONFIG_SYS_FLASH_CHECKSUM
@ -229,13 +230,13 @@
/*
* PRIO1/PIGGY on the local bus CS1
*/
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE /* Window base at flash base */
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_PIGGY_BASE | \
(1 << BR_PS_SHIFT) | /* 8 bit port size */ \
BR_V)
#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | /* 128MB */ \
#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | \
OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
OR_GPCM_SCY_2 | \
OR_GPCM_TRLX | OR_GPCM_EAD)
@ -243,7 +244,7 @@
/*
* PAXE on the local bus CS3
*/
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE /* Window base at flash base */
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PAXE_BASE | \
@ -267,8 +268,8 @@
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
/* Pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS
/*
@ -278,7 +279,7 @@
#undef CONFIG_PCI /* No PCI */
#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI 1
#define CONFIG_NET_MULTI
#endif
/*
* QE UEC ethernet configuration
@ -291,7 +292,7 @@
#ifdef CONFIG_UEC_ETH1
#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII */
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
@ -305,17 +306,19 @@
#ifndef CONFIG_SYS_RAMBOOT
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN)
/* Address and size of Redundant Environment Sector */
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#else /* CFG_RAMBOOT */
#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
#define CONFIG_SYS_NO_FLASH /* Flash is not usable now */
#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
#define CONFIG_ENV_SIZE 0x2000
#endif /* CFG_RAMBOOT */
@ -333,9 +336,9 @@
/* EEprom support */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */
#define CONFIG_SYS_DTT_MAX_TEMP 70
#define CONFIG_SYS_DTT_LOW_TEMP -30
#define CONFIG_SYS_DTT_HYSTERESIS 3
@ -361,7 +364,7 @@
* have to be in the first 256 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
/*
* Core HID Setup
@ -375,45 +378,54 @@
* MMU Setup
*/
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
#define CONFIG_HIGH_BATS /* High BATs supported */
/* DDR: cache cacheable */
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
/* IMMRBAR & PCI IO: cache-inhibit and guarded */
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | \
BATU_VP)
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
/* FLASH: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
/* Stack in dcache: cacheable, no memory coherence */
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
/* PAXE: icache cacheable, but dcache-inhibit and guarded */
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | \
BATU_VS | BATU_VP)
#define CONFIG_SYS_DBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U

107
include/configs/mgcoge.h
Unescape View File

@ -29,15 +29,12 @@
* (easy to change)
*/
#define CONFIG_MPC8247 1
#define CONFIG_MPC8272_FAMILY 1
#define CONFIG_MGCOGE 1
#define CONFIG_MPC8247
#define CONFIG_MGCOGE
#define CONFIG_HOSTNAME mgcoge
#define CONFIG_SYS_TEXT_BASE 0xFE000000
#define CONFIG_CPM2 1 /* Has a CPM2 */
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
@ -69,13 +66,13 @@
#define CONFIG_ETHER_ON_SCC /* Ethernet is on SCC */
#undef CONFIG_ETHER_ON_FCC /* Ethernet is not on FCC */
#undef CONFIG_ETHER_NONE /* No external Ethernet */
#define CONFIG_NET_MULTI 1
#define CONFIG_NET_MULTI
#define CONFIG_ETHER_INDEX 4
#define CONFIG_HAS_ETH0
#define CONFIG_SYS_SCC_TOUT_LOOP 10000000
# define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
# define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
#ifndef CONFIG_8260_CLKIN
#define CONFIG_8260_CLKIN 66000000 /* in Hz */
@ -113,8 +110,9 @@
#define CONFIG_SYS_FLASH_SIZE 32
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS 3
/* max num of sects on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT 512
#define CONFIG_SYS_FLASH_BASE_1 0x50000000
#define CONFIG_SYS_FLASH_SIZE_1 32
@ -130,24 +128,26 @@
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384KB for Monitor */
#define CONFIG_SYS_MONITOR_LEN (384 << 10)
#define CONFIG_ENV_IS_IN_FLASH
#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN
/* Address and size of Redundant Environment Sector */
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#endif /* CONFIG_ENV_IS_IN_FLASH */
#define CONFIG_ENV_BUFFER_PRINT 1
#define CONFIG_ENV_BUFFER_PRINT
/* enable I2C and select the hardware/software driver */
#undef CONFIG_HARD_I2C /* I2C with hardware support */
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
#define CONFIG_SOFT_I2C /* I2C bit-banged */
#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
@ -159,15 +159,23 @@
#define I2C_ACTIVE (iop->pdir |= 0x00010000)
#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
#define I2C_READ ((iop->pdat & 0x00010000) != 0)
#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
else iop->pdat &= ~0x00010000
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
else iop->pdat &= ~0x00020000
#define I2C_SDA(bit) do { \
if (bit) \
iop->pdat |= 0x00010000; \
else \
iop->pdat &= ~0x00010000; \
} while (0)
#define I2C_SCL(bit) do { \
if (bit) \
iop->pdat |= 0x00020000; \
else \
iop->pdat &= ~0x00020000; \
} while (0)
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
#define CONFIG_SYS_DTT_MAX_TEMP 70
#define CONFIG_SYS_DTT_LOW_TEMP -30
#define CONFIG_SYS_DTT_HYSTERESIS 3
@ -178,8 +186,9 @@
#define CONFIG_SYS_IMMR 0xF0000000
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* Hard reset configuration word */
@ -194,11 +203,11 @@
#define CONFIG_SYS_HRCW_SLAVE6 0
#define CONFIG_SYS_HRCW_SLAVE7 0
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
#define CONFIG_SYS_HID0_INIT 0
@ -211,14 +220,16 @@
#define CONFIG_SYS_BCR 0x10000000
#define CONFIG_SYS_SCCR (SCCR_PCI_MODE | SCCR_PCI_MODCK)
/*-----------------------------------------------------------------------
/*
*-----------------------------------------------------------------------
* RMR - Reset Mode Register 5-5
*-----------------------------------------------------------------------
* turn on Checkstop Reset Enable
*/
#define CONFIG_SYS_RMR 0
/*-----------------------------------------------------------------------
/*
*-----------------------------------------------------------------------
* TMCNTSC - Time Counter Status and Control 4-40
*-----------------------------------------------------------------------
* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
@ -226,7 +237,8 @@
*/
#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
/*-----------------------------------------------------------------------
/*
*-----------------------------------------------------------------------
* PISCR - Periodic Interrupt Status and Control 4-42
*-----------------------------------------------------------------------
* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
@ -234,7 +246,8 @@
*/
#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
/*-----------------------------------------------------------------------
/*
*-----------------------------------------------------------------------
* RCCR - RISC Controller Configuration 13-7
*-----------------------------------------------------------------------
*/
@ -265,14 +278,16 @@
ORxG_TRLX )
/* Bank 1 - 60x bus SDRAM
/*
* Bank 1 - 60x bus SDRAM
*/
#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */
#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20)
#define CONFIG_SYS_MPTPR 0x1800
/*-----------------------------------------------------------------------------
/*
*-----------------------------------------------------------------------------
* Address for Mode Register Set (MRS) command
*-----------------------------------------------------------------------------
*/
@ -286,8 +301,9 @@
#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1
/* SDRAM initialization values
*/
/*
* SDRAM initialization values
*/
#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
ORxS_BPD_8 |\
@ -304,8 +320,9 @@
PSDMR_WRC_1C |\
PSDMR_CL_2)
/* GPIO/PIGGY on CS3 initialization values
*/
/*
* GPIO/PIGGY on CS3 initialization values
*/
#define CONFIG_SYS_PIGGY_BASE 0x30000000
#define CONFIG_SYS_PIGGY_SIZE 128
@ -316,8 +333,9 @@
ORxG_CSNT | ORxG_ACS_DIV2 |\
ORxG_SCY_3_CLK | ORxG_TRLX )
/* Board FPGA on CS4 initialization values
*/
/*
* Board FPGA on CS4 initialization values
*/
#define CONFIG_SYS_FPGA_BASE 0x40000000
#define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/
@ -328,8 +346,9 @@
ORxG_CSNT | ORxG_ACS_DIV2 |\
ORxG_SCY_3_CLK | ORxG_TRLX )
/* CFG-Flash on CS5 initialization values
*/
/*
* CFG-Flash on CS5 initialization values
*/
#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\
BRx_PS_16 | BRx_MS_GPCM_P | BRx_V)
@ -338,12 +357,12 @@
ORxG_CSNT | ORxG_ACS_DIV2 |\
ORxG_SCY_5_CLK | ORxG_TRLX )
#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
/* pass open firmware flat tree */
#define CONFIG_FIT 1
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define CONFIG_FIT
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/soc/cpm/serial@11a90"

Write Preview
Loading…
Cancel
Save