This patch adds support for the DFI BayTrail BT700 QSeven SoM installed on the DFI Q7X-151 baseboard. The baseboard is equipped with the Nuvoton NCT6102D Super IO chip providing the UART as console. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>master
Stefan Roese
8 years ago
committed by
Bin Meng
parent
303dfc2e5e
commit
b1ad6c6966
@ -0,0 +1,22 @@ |
||||
/* |
||||
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com> |
||||
* Copyright (C) 2016 Stefan Roese <sr@denx.de> |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
/dts-v1/; |
||||
|
||||
#include "dfi-bt700.dtsi" |
||||
|
||||
#include "serial.dtsi" |
||||
|
||||
/ { |
||||
model = "DFI-BT700"; |
||||
compatible = "dfi,bt700", "intel,baytrail"; |
||||
|
||||
aliases { |
||||
serial0 = &serial; |
||||
spi0 = &spi; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,308 @@ |
||||
/* |
||||
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com> |
||||
* Copyright (C) 2016 Stefan Roese <sr@denx.de> |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#include <dt-bindings/gpio/x86-gpio.h> |
||||
#include <dt-bindings/interrupt-router/intel-irq.h> |
||||
|
||||
#include "skeleton.dtsi" |
||||
#include "rtc.dtsi" |
||||
#include "tsc_timer.dtsi" |
||||
|
||||
/ { |
||||
config { |
||||
silent_console = <0>; |
||||
}; |
||||
|
||||
pch_pinctrl { |
||||
compatible = "intel,x86-pinctrl"; |
||||
reg = <0 0>; |
||||
|
||||
/* Add UART1 PAD configuration (SIO HS-UART) */ |
||||
uart1_txd@0 { |
||||
pad-offset = <0x10>; |
||||
mode-func = <1>; |
||||
}; |
||||
|
||||
uart1_rxd@0 { |
||||
pad-offset = <0x20>; |
||||
mode-func = <1>; |
||||
}; |
||||
|
||||
/* |
||||
* As of today, the latest version FSP (gold4) for BayTrail |
||||
* misses the PAD configuration of the SD controller's Card |
||||
* Detect signal. The default PAD value for the CD pin sets |
||||
* the pin to work in GPIO mode, which causes card detect |
||||
* status cannot be reflected by the Present State register |
||||
* in the SD controller (bit 16 & bit 18 are always zero). |
||||
* |
||||
* Configure this pin to function 1 (SD controller). |
||||
*/ |
||||
sdmmc3_cd@0 { |
||||
pad-offset = <0x3a0>; |
||||
mode-func = <1>; |
||||
}; |
||||
}; |
||||
|
||||
chosen { |
||||
stdout-path = "/serial"; |
||||
}; |
||||
|
||||
cpus { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
|
||||
cpu@0 { |
||||
device_type = "cpu"; |
||||
compatible = "intel,baytrail-cpu"; |
||||
reg = <0>; |
||||
intel,apic-id = <0>; |
||||
}; |
||||
|
||||
cpu@1 { |
||||
device_type = "cpu"; |
||||
compatible = "intel,baytrail-cpu"; |
||||
reg = <1>; |
||||
intel,apic-id = <2>; |
||||
}; |
||||
|
||||
cpu@2 { |
||||
device_type = "cpu"; |
||||
compatible = "intel,baytrail-cpu"; |
||||
reg = <2>; |
||||
intel,apic-id = <4>; |
||||
}; |
||||
|
||||
cpu@3 { |
||||
device_type = "cpu"; |
||||
compatible = "intel,baytrail-cpu"; |
||||
reg = <3>; |
||||
intel,apic-id = <6>; |
||||
}; |
||||
}; |
||||
|
||||
pci { |
||||
compatible = "intel,pci-baytrail", "pci-x86"; |
||||
#address-cells = <3>; |
||||
#size-cells = <2>; |
||||
u-boot,dm-pre-reloc; |
||||
ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000 |
||||
0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000 |
||||
0x01000000 0x0 0x2000 0x2000 0 0xe000>; |
||||
|
||||
pciuart0: uart@1e,3 { |
||||
compatible = "pci8086,0f0a.00", |
||||
"pci8086,0f0a", |
||||
"pciclass,070002", |
||||
"pciclass,0700", |
||||
"ns16550"; |
||||
u-boot,dm-pre-reloc; |
||||
reg = <0x0200f310 0x0 0x0 0x0 0x0>; |
||||
reg-shift = <2>; |
||||
clock-frequency = <58982400>; |
||||
current-speed = <115200>; |
||||
}; |
||||
|
||||
pch@1f,0 { |
||||
reg = <0x0000f800 0 0 0 0>; |
||||
compatible = "pci8086,0f1c", "intel,pch9"; |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
|
||||
irq-router { |
||||
compatible = "intel,irq-router"; |
||||
intel,pirq-config = "ibase"; |
||||
intel,ibase-offset = <0x50>; |
||||
intel,actl-addr = <0>; |
||||
intel,pirq-link = <8 8>; |
||||
intel,pirq-mask = <0xdee0>; |
||||
intel,pirq-routing = < |
||||
/* BayTrail PCI devices */ |
||||
PCI_BDF(0, 2, 0) INTA PIRQA |
||||
PCI_BDF(0, 3, 0) INTA PIRQA |
||||
PCI_BDF(0, 16, 0) INTA PIRQA |
||||
PCI_BDF(0, 17, 0) INTA PIRQA |
||||
PCI_BDF(0, 18, 0) INTA PIRQA |
||||
PCI_BDF(0, 19, 0) INTA PIRQA |
||||
PCI_BDF(0, 20, 0) INTA PIRQA |
||||
PCI_BDF(0, 21, 0) INTA PIRQA |
||||
PCI_BDF(0, 22, 0) INTA PIRQA |
||||
PCI_BDF(0, 23, 0) INTA PIRQA |
||||
PCI_BDF(0, 24, 0) INTA PIRQA |
||||
PCI_BDF(0, 24, 1) INTC PIRQC |
||||
PCI_BDF(0, 24, 2) INTD PIRQD |
||||
PCI_BDF(0, 24, 3) INTB PIRQB |
||||
PCI_BDF(0, 24, 4) INTA PIRQA |
||||
PCI_BDF(0, 24, 5) INTC PIRQC |
||||
PCI_BDF(0, 24, 6) INTD PIRQD |
||||
PCI_BDF(0, 24, 7) INTB PIRQB |
||||
PCI_BDF(0, 26, 0) INTA PIRQA |
||||
PCI_BDF(0, 27, 0) INTA PIRQA |
||||
PCI_BDF(0, 28, 0) INTA PIRQA |
||||
PCI_BDF(0, 28, 1) INTB PIRQB |
||||
PCI_BDF(0, 28, 2) INTC PIRQC |
||||
PCI_BDF(0, 28, 3) INTD PIRQD |
||||
PCI_BDF(0, 29, 0) INTA PIRQA |
||||
PCI_BDF(0, 30, 0) INTA PIRQA |
||||
PCI_BDF(0, 30, 1) INTD PIRQD |
||||
PCI_BDF(0, 30, 2) INTB PIRQB |
||||
PCI_BDF(0, 30, 3) INTC PIRQC |
||||
PCI_BDF(0, 30, 4) INTD PIRQD |
||||
PCI_BDF(0, 30, 5) INTB PIRQB |
||||
PCI_BDF(0, 31, 3) INTB PIRQB |
||||
|
||||
/* |
||||
* PCIe root ports downstream |
||||
* interrupts |
||||
*/ |
||||
PCI_BDF(1, 0, 0) INTA PIRQA |
||||
PCI_BDF(1, 0, 0) INTB PIRQB |
||||
PCI_BDF(1, 0, 0) INTC PIRQC |
||||
PCI_BDF(1, 0, 0) INTD PIRQD |
||||
PCI_BDF(2, 0, 0) INTA PIRQB |
||||
PCI_BDF(2, 0, 0) INTB PIRQC |
||||
PCI_BDF(2, 0, 0) INTC PIRQD |
||||
PCI_BDF(2, 0, 0) INTD PIRQA |
||||
PCI_BDF(3, 0, 0) INTA PIRQC |
||||
PCI_BDF(3, 0, 0) INTB PIRQD |
||||
PCI_BDF(3, 0, 0) INTC PIRQA |
||||
PCI_BDF(3, 0, 0) INTD PIRQB |
||||
PCI_BDF(4, 0, 0) INTA PIRQD |
||||
PCI_BDF(4, 0, 0) INTB PIRQA |
||||
PCI_BDF(4, 0, 0) INTC PIRQB |
||||
PCI_BDF(4, 0, 0) INTD PIRQC |
||||
>; |
||||
}; |
||||
|
||||
spi: spi { |
||||
#address-cells = <1>; |
||||
#size-cells = <0>; |
||||
compatible = "intel,ich9-spi"; |
||||
spi-flash@0 { |
||||
#address-cells = <1>; |
||||
#size-cells = <1>; |
||||
reg = <0>; |
||||
compatible = "stmicro,n25q064a", |
||||
"spi-flash"; |
||||
memory-map = <0xff800000 0x00800000>; |
||||
rw-mrc-cache { |
||||
label = "rw-mrc-cache"; |
||||
reg = <0x006f0000 0x00010000>; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
gpioa { |
||||
compatible = "intel,ich6-gpio"; |
||||
u-boot,dm-pre-reloc; |
||||
reg = <0 0x20>; |
||||
bank-name = "A"; |
||||
}; |
||||
|
||||
gpiob { |
||||
compatible = "intel,ich6-gpio"; |
||||
u-boot,dm-pre-reloc; |
||||
reg = <0x20 0x20>; |
||||
bank-name = "B"; |
||||
}; |
||||
|
||||
gpioc { |
||||
compatible = "intel,ich6-gpio"; |
||||
u-boot,dm-pre-reloc; |
||||
reg = <0x40 0x20>; |
||||
bank-name = "C"; |
||||
}; |
||||
|
||||
gpiod { |
||||
compatible = "intel,ich6-gpio"; |
||||
u-boot,dm-pre-reloc; |
||||
reg = <0x60 0x20>; |
||||
bank-name = "D"; |
||||
}; |
||||
|
||||
gpioe { |
||||
compatible = "intel,ich6-gpio"; |
||||
u-boot,dm-pre-reloc; |
||||
reg = <0x80 0x20>; |
||||
bank-name = "E"; |
||||
}; |
||||
|
||||
gpiof { |
||||
compatible = "intel,ich6-gpio"; |
||||
u-boot,dm-pre-reloc; |
||||
reg = <0xA0 0x20>; |
||||
bank-name = "F"; |
||||
}; |
||||
}; |
||||
}; |
||||
|
||||
fsp { |
||||
compatible = "intel,baytrail-fsp"; |
||||
fsp,mrc-init-tseg-size = <0>; |
||||
fsp,mrc-init-mmio-size = <0x800>; |
||||
fsp,mrc-init-spd-addr1 = <0xa0>; |
||||
fsp,mrc-init-spd-addr2 = <0xa2>; |
||||
fsp,emmc-boot-mode = <1>; |
||||
fsp,enable-sdio; |
||||
fsp,enable-sdcard; |
||||
fsp,enable-hsuart0; |
||||
fsp,enable-hsuart1; |
||||
fsp,enable-spi; |
||||
fsp,enable-sata; |
||||
fsp,sata-mode = <1>; |
||||
fsp,enable-lpe; |
||||
fsp,lpss-sio-enable-pci-mode; |
||||
fsp,enable-dma0; |
||||
fsp,enable-dma1; |
||||
fsp,enable-i2c0; |
||||
fsp,enable-i2c1; |
||||
fsp,enable-i2c2; |
||||
fsp,enable-i2c3; |
||||
fsp,enable-i2c4; |
||||
fsp,enable-i2c5; |
||||
fsp,enable-i2c6; |
||||
fsp,enable-pwm0; |
||||
fsp,enable-pwm1; |
||||
fsp,igd-dvmt50-pre-alloc = <2>; |
||||
fsp,aperture-size = <2>; |
||||
fsp,gtt-size = <2>; |
||||
fsp,scc-enable-pci-mode; |
||||
fsp,os-selection = <4>; |
||||
fsp,emmc45-ddr50-enabled; |
||||
fsp,emmc45-retune-timer-value = <8>; |
||||
fsp,enable-igd; |
||||
fsp,enable-memory-down; |
||||
fsp,memory-down-params { |
||||
compatible = "intel,baytrail-fsp-mdp"; |
||||
fsp,dram-speed = <2>; /* 2=1333MHz */ |
||||
fsp,dram-type = <1>; /* 1=DDR3L */ |
||||
fsp,dimm-0-enable; |
||||
fsp,dimm-width = <1>; /* 1=x16, 2=x32 */ |
||||
fsp,dimm-density = <3>; /* 3=8Gbit */ |
||||
fsp,dimm-bus-width = <3>; /* 3=64bits */ |
||||
fsp,dimm-sides = <0>; /* 0=1 ranks -> 0x2b */ |
||||
|
||||
/* These following values might need a re-visit */ |
||||
fsp,dimm-tcl = <8>; |
||||
fsp,dimm-trpt-rcd = <8>; |
||||
fsp,dimm-twr = <8>; |
||||
fsp,dimm-twtr = <4>; |
||||
fsp,dimm-trrd = <6>; |
||||
fsp,dimm-trtp = <4>; |
||||
fsp,dimm-tfaw = <22>; |
||||
}; |
||||
}; |
||||
|
||||
microcode { |
||||
update@0 { |
||||
#include "microcode/m0130673325.dtsi" |
||||
}; |
||||
update@1 { |
||||
#include "microcode/m0130679907.dtsi" |
||||
}; |
||||
}; |
||||
}; |
||||
@ -0,0 +1,29 @@ |
||||
# |
||||
# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> |
||||
# |
||||
# SPDX-License-Identifier: GPL-2.0+ |
||||
# |
||||
|
||||
if VENDOR_DFI |
||||
|
||||
choice |
||||
prompt "Mainboard model" |
||||
optional |
||||
|
||||
config TARGET_DFI_BT700 |
||||
bool "DFI BT700 BayTrail" |
||||
help |
||||
This is the DFI Q7X-151 baseboard equipped with the |
||||
DFI BayTrail Bt700 SoM. It contains an Atom E3845 with |
||||
Ethernet (in non-PCIe-x4 configuration), micro-SD, USB 2, |
||||
USB 3, SATA, serial console and DisplayPort video out. |
||||
It requires some binary blobs - see README.x86 for details. |
||||
|
||||
Note that PCIE_ECAM_BASE is set up by the FSP so the value used |
||||
by U-Boot matches that value. |
||||
|
||||
endchoice |
||||
|
||||
source "board/dfi/dfi-bt700/Kconfig" |
||||
|
||||
endif |
||||
@ -0,0 +1,28 @@ |
||||
if TARGET_DFI_BT700 |
||||
|
||||
config SYS_BOARD |
||||
default "dfi-bt700" |
||||
|
||||
config SYS_VENDOR |
||||
default "dfi" |
||||
|
||||
config SYS_SOC |
||||
default "baytrail" |
||||
|
||||
config SYS_CONFIG_NAME |
||||
default "dfi-bt700" |
||||
|
||||
config SYS_TEXT_BASE |
||||
default 0xfff00000 if !EFI_STUB |
||||
default 0x01110000 if EFI_STUB |
||||
|
||||
config BOARD_SPECIFIC_OPTIONS # dummy |
||||
def_bool y |
||||
select X86_RESET_VECTOR if !EFI_STUB |
||||
select INTEL_BAYTRAIL |
||||
select BOARD_ROMSIZE_KB_8192 |
||||
|
||||
config PCIE_ECAM_BASE |
||||
default 0xe0000000 |
||||
|
||||
endif |
||||
@ -0,0 +1,8 @@ |
||||
congatec DFI-BT700 |
||||
M: Stefan Roese <sr@denx.de> |
||||
S: Maintained |
||||
F: board/dfi/dfi-bt700 |
||||
F: include/configs/dfi-bt700.h |
||||
F: configs/dfi-bt700-q7x-151_defconfig |
||||
F: arch/x86/dts/dfi-bt700.dtsi |
||||
F: arch/x86/dts/dfi-bt700-q7x-151.dts |
||||
@ -0,0 +1,8 @@ |
||||
#
|
||||
# Copyright (C) 2015, Google, Inc
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += dfi-bt700.o start.o
|
||||
obj-$(CONFIG_GENERATE_ACPI_TABLE) += dsdt.o
|
||||
@ -0,0 +1,13 @@ |
||||
/* |
||||
* Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com> |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
/* Power Button */ |
||||
Device (PWRB) |
||||
{ |
||||
Name(_HID, EISAID("PNP0C0C")) |
||||
} |
||||
|
||||
/* TODO: Need add Nuvoton SuperIO chipset NCT6102D ASL codes */ |
||||
@ -0,0 +1,30 @@ |
||||
/*
|
||||
* Copyright (C) 2016 Stefan Roese <sr@denx.de> |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
#include <common.h> |
||||
#include <nuvoton_nct6102d.h> |
||||
#include <asm/gpio.h> |
||||
#include <asm/ibmpc.h> |
||||
#include <asm/pnp_def.h> |
||||
|
||||
int board_early_init_f(void) |
||||
{ |
||||
#ifdef CONFIG_INTERNAL_UART |
||||
/* Disable the legacy UART which is enabled per default */ |
||||
nct6102d_uarta_disable(); |
||||
#else |
||||
/*
|
||||
* The FSP enables the BayTrail internal legacy UART (again). |
||||
* Disable it again, so that the Nuvoton one can be used. |
||||
*/ |
||||
setup_internal_uart(0); |
||||
#endif |
||||
|
||||
/* Disable the watchdog which is enabled per default */ |
||||
nct6102d_wdt_disable(); |
||||
|
||||
return 0; |
||||
} |
||||
@ -0,0 +1,14 @@ |
||||
/* |
||||
* Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com> |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
DefinitionBlock("dsdt.aml", "DSDT", 2, "U-BOOT", "U-BOOTBL", 0x00010000) |
||||
{ |
||||
/* platform specific */ |
||||
#include <asm/arch/acpi/platform.asl> |
||||
|
||||
/* board specific */ |
||||
#include "acpi/mainboard.asl" |
||||
} |
||||
@ -0,0 +1,9 @@ |
||||
/* |
||||
* Copyright (C) 2015, Google, Inc |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
.globl early_board_init
|
||||
early_board_init: |
||||
jmp early_board_init_ret |
||||
@ -0,0 +1,63 @@ |
||||
CONFIG_X86=y |
||||
CONFIG_DM_I2C=y |
||||
CONFIG_VENDOR_DFI=y |
||||
CONFIG_DEFAULT_DEVICE_TREE="dfi-bt700-q7x-151" |
||||
CONFIG_TARGET_DFI_BT700=y |
||||
CONFIG_HAVE_INTEL_ME=y |
||||
CONFIG_ENABLE_MRC_CACHE=y |
||||
CONFIG_SMP=y |
||||
CONFIG_HAVE_VGA_BIOS=y |
||||
CONFIG_GENERATE_PIRQ_TABLE=y |
||||
CONFIG_GENERATE_MP_TABLE=y |
||||
CONFIG_GENERATE_ACPI_TABLE=y |
||||
CONFIG_SEABIOS=y |
||||
CONFIG_FIT=y |
||||
CONFIG_FIT_SIGNATURE=y |
||||
CONFIG_BOOTSTAGE=y |
||||
CONFIG_BOOTSTAGE_REPORT=y |
||||
CONFIG_HUSH_PARSER=y |
||||
CONFIG_CMD_CPU=y |
||||
# CONFIG_CMD_IMLS is not set |
||||
# CONFIG_CMD_FLASH is not set |
||||
CONFIG_CMD_MMC=y |
||||
CONFIG_CMD_SF=y |
||||
CONFIG_CMD_SPI=y |
||||
CONFIG_CMD_USB=y |
||||
CONFIG_CMD_GPIO=y |
||||
# CONFIG_CMD_SETEXPR is not set |
||||
CONFIG_CMD_DHCP=y |
||||
# CONFIG_CMD_NFS is not set |
||||
CONFIG_CMD_PING=y |
||||
CONFIG_CMD_TIME=y |
||||
CONFIG_CMD_BOOTSTAGE=y |
||||
CONFIG_CMD_EXT2=y |
||||
CONFIG_CMD_EXT4=y |
||||
CONFIG_CMD_EXT4_WRITE=y |
||||
CONFIG_CMD_FAT=y |
||||
CONFIG_CMD_FS_GENERIC=y |
||||
CONFIG_OF_CONTROL=y |
||||
CONFIG_REGMAP=y |
||||
CONFIG_SYSCON=y |
||||
CONFIG_CPU=y |
||||
CONFIG_NUVOTON_NCT6102D=y |
||||
CONFIG_SPI_FLASH=y |
||||
CONFIG_SPI_FLASH_GIGADEVICE=y |
||||
CONFIG_SPI_FLASH_MACRONIX=y |
||||
CONFIG_SPI_FLASH_STMICRO=y |
||||
CONFIG_SPI_FLASH_WINBOND=y |
||||
CONFIG_DM_ETH=y |
||||
CONFIG_E1000=y |
||||
CONFIG_DM_PCI=y |
||||
CONFIG_DM_RTC=y |
||||
CONFIG_DEBUG_UART=y |
||||
CONFIG_DEBUG_UART_BASE=0x3f8 |
||||
CONFIG_DEBUG_UART_CLOCK=1843200 |
||||
CONFIG_SYS_NS16550=y |
||||
CONFIG_ICH_SPI=y |
||||
CONFIG_TIMER=y |
||||
CONFIG_USB=y |
||||
CONFIG_DM_USB=y |
||||
CONFIG_VIDEO_VESA=y |
||||
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y |
||||
CONFIG_FRAMEBUFFER_VESA_MODE_114=y |
||||
CONFIG_USE_PRIVATE_LIBGCC=y |
||||
@ -0,0 +1,74 @@ |
||||
/*
|
||||
* Copyright (C) 2016 Stefan Roese <sr@denx.de> |
||||
* |
||||
* SPDX-License-Identifier: GPL-2.0+ |
||||
*/ |
||||
|
||||
/*
|
||||
* board/config.h - configuration options, board specific |
||||
*/ |
||||
|
||||
#ifndef __CONFIG_H |
||||
#define __CONFIG_H |
||||
|
||||
#include <configs/x86-common.h> |
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (1 << 20) |
||||
#define CONFIG_BOARD_EARLY_INIT_F |
||||
|
||||
#ifndef CONFIG_INTERNAL_UART |
||||
/* Use BayTrail internal HS UART which is memory-mapped */ |
||||
#undef CONFIG_SYS_NS16550_PORT_MAPPED |
||||
#endif |
||||
|
||||
#define CONFIG_PCI_PNP |
||||
|
||||
#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ |
||||
"stdout=serial\0" \
|
||||
"stderr=serial\0" |
||||
|
||||
#define CONFIG_SCSI_DEV_LIST \ |
||||
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}, \
|
||||
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA_ALT} |
||||
|
||||
#define CONFIG_MMC |
||||
#define CONFIG_SDHCI |
||||
#define CONFIG_GENERIC_MMC |
||||
#define CONFIG_MMC_SDMA |
||||
|
||||
#undef CONFIG_USB_MAX_CONTROLLER_COUNT |
||||
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 |
||||
|
||||
#define CONFIG_USB_HOST_ETHER |
||||
#define CONFIG_USB_ETHER_ASIX |
||||
#define CONFIG_USB_ETHER_SMSC95XX |
||||
#define CONFIG_USB_ETHER_MCS7830 |
||||
#define CONFIG_USB_ETHER_RTL8152 |
||||
|
||||
#define VIDEO_IO_OFFSET 0 |
||||
#define CONFIG_X86EMU_RAW_IO |
||||
#define CONFIG_CMD_BMP |
||||
|
||||
#define CONFIG_ENV_SECT_SIZE 0x1000 |
||||
#define CONFIG_ENV_OFFSET 0x006ef000 |
||||
|
||||
#undef CONFIG_BOOTARGS |
||||
#undef CONFIG_BOOTCOMMAND |
||||
|
||||
#define CONFIG_BOOTARGS \ |
||||
"root=/dev/sda1 ro quiet" |
||||
#define CONFIG_BOOTCOMMAND \ |
||||
"load scsi 0:1 03000000 /boot/vmlinuz-${kernel-ver}-generic;" \
|
||||
"load scsi 0:1 04000000 /boot/initrd.img-${kernel-ver}-generic;" \
|
||||
"run boot" |
||||
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS |
||||
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||
"kernel-ver=4.4.0-24\0" \
|
||||
"boot=zboot 03000000 0 04000000 ${filesize}\0" \
|
||||
"upd_uboot=usb reset;tftp 100000 dfi/u-boot.rom;" \
|
||||
"sf probe;sf update 100000 0 800000;saveenv\0" |
||||
|
||||
#define CONFIG_PREBOOT |
||||
|
||||
#endif /* __CONFIG_H */ |
||||
Loading…
Reference in new issue