arm: socfpga: socrates: Probe DWC2 UDC from OF instead of hard-coded data

This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
master
Marek Vasut 9 years ago
parent 225217da28
commit b5a5d2bd96
  1. 8
      arch/arm/dts/socfpga_cyclone5_socrates.dts
  2. 21
      board/ebv/socrates/socfpga.c
  3. 2
      configs/socfpga_socrates_defconfig
  4. 3
      include/configs/socfpga_socrates.h

@ -14,6 +14,10 @@
bootargs = "console=ttyS0,115200";
};
aliases {
udc0 = &usb1;
};
memory {
name = "memory";
device_type = "memory";
@ -72,3 +76,7 @@
tslch-ns = <4>;
};
};
&usb1 {
status = "okay";
};

@ -5,12 +5,12 @@
*/
#include <common.h>
#include <errno.h>
#include <asm/arch/reset_manager.h>
#include <asm/io.h>
#include <usb.h>
#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
DECLARE_GLOBAL_DATA_PTR;
@ -29,12 +29,29 @@ int board_init(void)
#ifdef CONFIG_USB_GADGET
struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
.usb_gusbcfg = 0x1417,
};
int board_usb_init(int index, enum usb_init_type init)
{
int node[2], count;
fdt_addr_t addr;
count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc",
COMPAT_ALTERA_SOCFPGA_DWC2USB,
node, 2);
if (count <= 0) /* No controller found. */
return 0;
addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg");
if (addr == FDT_ADDR_T_NONE) {
printf("UDC Controller has no 'reg' property!\n");
return -EINVAL;
}
/* Patch the address from OF into the controller pdata. */
socfpga_otg_data.regs_otg = addr;
return dwc2_udc_probe(&socfpga_otg_data);
}

@ -22,3 +22,5 @@ CONFIG_SYS_NS16550=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_DM_MMC=y
CONFIG_USB=y
CONFIG_DM_USB=y

@ -52,9 +52,6 @@
#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS
#endif
#define CONFIG_G_DNL_MANUFACTURER "EBV"
/* Extra Environment */

Loading…
Cancel
Save